The comparison in enantioseparation ability of the chiral stationary phases with single and mixed selector--the selectors derived from two D-tartrates

(2S,3S)-2,3-Bis(3,5-dimethylphenylcarbonyloxy)-3-(benzyloxycarbonyl)-propanoic acid and (2S,3S)-2,3-bis(1-naphthalenecarbonyloxy)-3-(benzyloxycarbonyl)-propanoic acid were synthesized from D-tartaric acid. These two compounds were chlorinated to afford two chiral selectors for chiral stationary phases (CSPs). The selectors were separately immobilized on aminated silica gel to give two single selector CSPs; and were simultaneously immobilized to obtain a mixed selector CSP. Comparing to the single selector CSPs, the mixed selector CSP bears the enhanced enantioseparation ability, suggesting that the two selectors in the mixed selector CSP are consistent for chiral recognition in most mobile phase conditions.     

Synthesis of polymer-type chiral stationary phases and their enantioseparation evaluation by high-performance liquid chromatography

Two new chiral polymers of different molecular weights were synthesized by the copolymerization of (1R,2R)-(+)-1,2-diphenylethylenediamine, phenyl diisocyanate and terephthaloyl chloride. The polymers were immobilized on aminated silica gel to afford two chiral stationary phases. The polymers and the corresponding chiral stationary phases were characterized by Fourier transform-IR, elemental analysis, 1H and 13C NMR. The surface coverages of chiral structural units on the chiral stationary phases were estimated as 0.27 and 0.39 mmol/g, respectively. The enantioseparation ability of these chiral stationary phases was evaluated with a variety of chiral compounds by high-performance liquid chromatography. The effects of the organic additives, the composition of mobile phases, and the injection amount of sample on enantioseparation were investigated. A comparison of enantioseparation ability between these two chiral stationary phases was made. It was believed that the chain length of polymeric chiral selector significantly affected the enantioseparation ability of corresponding chiral stationary phase.     

Evaluation of the chiral recognition properties and the column performances of three chiral stationary phases based on cellulose for the enantioseparation of six dihydropyridines by high‐performance liquid chromatography

Separations of six dihydropyridine enantiomers on three commercially available cellulose‐based chiral stationary phases (Chiralcel OD‐RH, Chiralpak IB, and Chiralpak IC) were evaluated with high‐performance liquid chromatography (HPLC). The best enantioseparation of the six chiral drugs was obtained with a Chiralpak IC (250 × 4.6 mm i.d., 5 μm) column. Then the influence of the mobile phase including an alcohol‐modifying agent and alkaline additive on the enantioseparation were investigated and optimized. The optimal mobile phase conditions and maximum resolution for every analyte were as follows respectively: n‐hexane/isopropanol (85:15, v /v) for nimodipine (R  = 5.80) and cinildilpine (R  = 5.65); n‐hexane/isopropanol (92:8, v /v) for nicardipine (R  = 1.76) and nisoldipine (R  = 1.92); and n‐hexane/isopropanol/ethanol (97:2:1, v /v/v) for felodipine (R  = 1.84) and lercanidipine (R  = 1.47). Relative separation mechanisms are discussed based on the separation results, and indicate that the achiral parts in the analytes' structure showed an important influence on the separation of the chiral column.     

Synthesis of dendritic stationary phases with surface-bonded L-phenylalanine derivate as chiral selector and their evaluation in HPLC resolution of racemic compounds

Four dendrimers were synthesized on aminopropyl-modified silica gel using methyl acrylate and ethylene diamine as building blocks by divergent method. Four generations of chiral stationary phases (CSPs) were prepared by coupling of L-2-(p-toluenesulfonamido)-3-phenylpropionyl chloride to corresponding dendrimers. The derivatives prepared on silica gel were characterized by FT-IR, (1)H NMR, and elemental analysis. The selector loadings of these four generations of CSPs generally showed a decrease tendency with the increase of generation numbers of dendrimers. The enantioseparation properties of these CSPs were preliminarily investigated by high-performance liquid chromatography. The CSP derived from the three-generation dendrimer exhibited the best enantioseparation capability. Effects of the mobile phase composition and molecular structures of racemic mixtures on enantioseparation were further studied.     

Synthesis of dendrimer‐type chiral stationary phases based on the selector of (1S,2R)‐(+)‐2‐Amino‐1,2‐diphenylethanol derivate and their enantioseparation evaluation by HPLC

In our recent work, a series of dendritic chiral stationary phases (CSPs) were synthesized, in which the chiral selector was L‐2‐(p‐toluenesulfonamido)‐3‐phenylpropionyl chloride (selector I), and the CSP derived from three‐generation dendrimer showed the best separation ability. To further investigate the influence of the structures of dendrimer and chiral selector on enantioseparation ability, in this work, another series CSPs ( CSPs 1‐4 ) were prepared by immobilizing (1S,2R)‐1,2‐diphenyl‐2‐(3‐phenylureido)ethyl 4‐isocyanatophenylcarbamate (selector II) on one‐ to four‐generation dendrimers that were prepared in previous work. CSPs 1 and 4 demonstrated the equivalent enantioseparation ability. CSPs 2 and 3 showed the best and poorest enantioseparation ability respectively. Basically, these two series of CSPs exhibited the equivalent enantioseparation ability although the chiral selectors were different. Considering the enantioseparation ability of the CSP derived from aminated silica gel and selector II is much better than that of the one derived from aminated silica gel and selector I, it is believed that the dendrimer conformation essentially impacts enantioseparation. Chirality, 2010. © 2009 Wiley‐Liss, Inc.     

HPLC with cellulose Tris (3,5‐DimethylPhenylcarbamate) chiral stationary phase: Influence of coating times and coating amount on chiral discrimination

Coating cellulose tris (3,5‐dimethylphenylcarbamate) (CDMPC) on silica gels with large pores have been demonstrated as an efficient way for the preparation of chiral stationary phase (CSP) for high‐performance liquid chromatography (HPLC). During the process, a number of parameters, including the type of coating solvent, amount of coating, and the method for subsequent solvent removing, have been proved to affect the performance of the resultant CSPs. Coating times and the concentration of coating solution, however, also makes a difference to CSPs' performance by changing the arrangement of cellulose derivatives while remaining the coating amount constant, have much less been studied before, and thereby, were systematically investigated in this work. Results showed that CSPs with more coating times exhibited higher chiral recognition and column efficiency, suggesting that resolution was determined by column efficiency herein. Afterwards, we also investigated the effect of coating amount on the performance of CSPs, and it was shown that the ability of enantio‐recognition did not increase all the time as the coating amount; and four of seven racemates achieved best resolution when the coating amount reached to 18.37%. At the end, the reproducibility of CDMPC‐coated CSPs were further confirmed by two methods, ie, reprepared the CSP‐0.15‐3 and reevaluated the effect of coating times.     

Cellulose type chiral stationary phase based on reduced graphene oxide@silica gel for the enantiomer separation of chiral compounds

The graphene oxide (GO) was covalently coupled to the surfaces of silica gel (SiO₂) microspheres by amide bond to get the graphene oxide@silica gel (GO@SiO₂). Then, the GO@SiO₂ was reduced with hydrazine to the reduced graphene oxide@silica gel (rGO@SiO₂), and the cellulose derivatives were physically coated on the surfaces of rGO@SiO₂ to prepare a chiral stationary phase (CSP) for high performance liquid chromatography. Under the optimum experimental conditions, eight benzene‐enriched enantiomers were separated completely, and the resolution of trans‐stilbene oxide perfectly reached 4.83. Compared with the blank column of non‐bonded rGO, the separation performance is better on the new CSP, which is due to the existence of rGO to produce special retention interaction with analytes, such as π‐π stacking, hydrophobic effect, π‐π electron‐donor–acceptor interaction, and hydrogen bonding. Therefore, the obtained CSP shows special selectivity for benzene‐enriched enantiomers, improves separation selectivity and efficiency, and rGO plays a synergistic effect with cellulose derivatives on enantioseparation.     

Crystallographic studies for the chiral recognition of the novel chiral stationary phase derived from (+)‐(R)‐18‐crown‐6 tetracarboxylic acid

Chiral discrimination observed in high‐performance liquid chromatography (HPLC) with the novel chiral stationary phase (CSP‐18C6I) derived from (+)‐(R)‐18‐crown‐6 tetracarboxylic acid [(+)‐18C6H₄] was investigated by X‐ray crystallographic analysis of the complex composed of the R‐enantiomer of 1‐(1‐naphthyl)ethylamine (1‐NEA) and (+)‐18C6H₄. Mixtures of 1‐NEA (the R‐ or S‐enantiomer) and (+)‐18C6H₄ were dissolved in methanol‐water (1:1) solution and allowed to stand for crystallization. The R‐enantiomer crystallized with (+)‐18C6H₄ as a co‐crystal, although the S‐enantiomer did not. This result was in good agreement with the enantiomer elution order of 1‐NEA in CSP‐18C6I. The apparent binding constants (K_a) of the enantiomers to the (+)‐18C6H₄ obtained from ¹H‐NMR experiments also supported the above‐mentioned result. The X‐ray crystal structure of the 1:1 complex of the R‐enantiomer and (+)‐18C6H₄ indicated the four sets of hydrogen bond association between the naphthylethylammonium cation and oxygen of polyether ring or carbonyl group of (+)‐18C6H₄. Chirality 11:173–178, 1999. © 1999 Wiley‐Liss, Inc.     

Preparation and chromatographic performance of a multifunctional immobilized chiral stationary phase based on dialdehyde microcrystalline cellulose derivatives

A novel high‐performance liquid chromatography (HPLC) multifunctional immobilized chiral stationary phase was prepared by bonding dialdehyde microcrystalline cellulose to aminosilica via Schiff base reaction and then derivatized with 3,5‐dimethylphenyl isocyanate. The HPLC multifunctional immobilized chiral stationary phase could not only achieve chiral separation but also achieve achiral separation. Chiral separation evaluation showed that 1‐(1‐naphthyl)ethanol and mandelonitrile got separation in normal phase (NP) mode. Ranolazine, benzoin ethyl ether, metalaxyl, and diclofop were successfully separated in reversed phase (RP) mode. Aromatic compounds such as polycyclic aromatic hydrocarbons (PAHs), anilines, and aromatic acids were selected as analytes to investigate the achiral separation performance of the multifunctional immobilized chiral stationary phase in NP and RP modes. The achiral separation evaluation showed that six PAHs could get good separation within 10 minutes in NP mode. Four aromatic acids were well separated in RP mode. The retention mechanism of aromatic compounds on the stationary phase was discussed, founding that π‐π interaction, π‐π electron‐donor‐acceptor (EDA) interaction, and hydrogen bonding interaction played important roles during the achiral separation process. This multifunctional immobilized chiral stationary phase had the advantages of simple bonding steps, short reaction time, and no need for space arm.     

Preparation and enantioseparation characteristics of two chiral stationary phases based on mono(6(A)-azido-6(A)-deoxy)-perphenylcarbamoylated alpha- and gamma-cyclodextrin

Two chiral stationary phases, ph-alpha-CD and ph-gamma-CD, were prepared from mono(6(A)-azido-6(A)-deoxy)perphenylcarbamoylated alpha- and gamma-cyclodextrin immobilized onto silica gel via the Staudinger reaction. The chromatographic characteristics of these two chiral stationary phases were evaluated. The influence of different cyclodextrins (CDs) on the enantioselectivities was also investigated in this study. Compared to ph-gamma-CD, ph-alpha-CD exhibited quite good enantioselectivity toward the analytes with bulky molecular structures. It was found that the formation of inclusion complex might play a quite important role in the chiral recognition not only under reverse phases but also under normal phases.     

Mechanism of chiral recognition in the enantioseparation of 2-aryloxypropionic acids on new brush-type chiral stationary phases

New brush-type chiral stationary phases (CSP I-IV) comprising N-3,5,6-trichloro-2,4-dicyanophenyl-L-alpha-amino acids (1-4) were prepared by binding of chiral selectors 1-4 to gamma-aminopropyl silica gel. To check the role of excess free aminopropyl groups, CSP V was prepared by binding N-3,5,6-trichloro-2,4-dicyanophenyl-L-alanyl-(3-triethoxysilyl)propylamide to unmodified silica gel. The best separation of racemic 2-aryloxypropionic acids (TR-1-13) was obtained with CSP I; the -(-)-S enantiomer were regularly eluted first, as determined by a CD detector. The mechanism of chiral recognition implies a synergistic interaction of carboxylic acid analyte with the chiral selector and achiral free gamma-aminopropyl units on silica. In fact, CSP V, which is lacking an achiral aminopropyl spacer, shows a lower separation ability for 2-aryloxypropionic acids, but a similar enantioselective discrimination of esters TR-19-20, in comparison with CSP I. CSP I-IV retain unaltered separation ability after a few months of continuous work using a large number of various mobile phases.     

New chiral stationary phases based on (R)‐1‐naphthylethylamine bound to 2,4,5,6‐tetrachloro‐1,3‐dicyanobenzene

Chiral functionalization of 2,4,5,6‐tetrachloro‐1,3‐dicyanobenzene (1) by regioselective nucleophilic substitution of one or two chlorine atoms by optically pure (R)‐(+)‐1‐naphthylethylamine (NEA), or by a glycine unit as a spacer to (R)‐NEA, enables the preparation of brush‐type chiral selectors (2, 3, 9, 13). By the introduction of the 3‐aminopropyltriethoxysilyl (APTES) group, reactive intermediates 4a/b, 5, 10a/b, and 14a/b are obtained ( a/b indicate a mixture of regioisomers with APTES in 6‐ and 2‐position). Binding of these to silica gel afforded four novel chiral stationary phases (CSPs) 6, 7, 15, and 16. HPLC columns containing CSPs with (R)‐NEA directly linked to polysubstituted aromatic ring (6, 7) are not very effective in resolution of most of the 23 racemic analytes, whereas the columns with distant π‐basic subunits (15, 16) exhibited higher resolving efficacy, in particular towards the isopropyl esters of racemic N‐3,5‐dinitrobenzoyl‐α‐amino acids. Effective resolution of test racemates reveals the importance of the presence of the hydrogen bond donor amido group and the distance between the persubstituted benzene ring in 1 and the π‐basic naphthalene ring of (R)‐NEA. Chirality 11:722–730, 1999. © 1999 Wiley‐Liss, Inc.     

A surface molecularly imprinted polymer as chiral stationary phase for chiral separation of 1,1′‐binaphthalene‐2‐naphthol racemates

Acrylamide (AM) was copolymerized with ethylene glycol dimethacrylate (EGDMA) in the presence of (R )‐1,1′‐binaphthalene‐2‐naphthol (BINOL) as the template molecules on the surface of silica gel by a free radical polymerization to produce a chiral stationary phase based on the surface molecularly imprinted polymer (SMIP‐CSP). The SMIP‐CSP showed a much better separation factor (α = 4.28) than the CSP based on the molecularly imprinted polymer (MIP‐CSP) without coating on the silica gel (α = 1.96) during the chiral separation of BINOL enantiomers by high‐performance liquid chromatography. The influence of the pretreatment temperature and the content of the template molecule ((R )‐BINOL) of the SMIP‐CSP, and the mobile phase composition on the separation of the racemic BINOL were systematically investigated.     

Liquid chromatographic direct resolution of flecainide and its analogs on a chiral stationary phase based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid

Flecainide, an antiarrythmic agent, and its analogs were resolved on a high performance liquid chromatographic chiral stationary phase (CSP) based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid with the use of a mobile phase consisting of methanol‐acetonitrile‐trifluoroacetic acid‐triethylamine (80/20/0.1/0.3, v/v/v/v). The chiral resolution was quite successful, the separation factors (α) and the resolutions (R_S) for 20 analytes including flecainide being in the range of 1.19–1.82 and 1.73–6.80, respectively. The ortho‐substituent of the benzoyl group of analytes was found to cause decrease in the retention times of analytes probably because of the conformational deformation of analytes originated from the steric hindrance exerted by the ortho‐substituent. Chirality, 2010. © 2009 Wiley‐Liss, Inc.     

Diphenylethanediamine (DPEDA) as chiral selector: VII. Efficient HPLC resolution of a series of underivatized diarylcarbinols on a chiral stationary phase based on C5-amide-bonded N-3,5-dinitrobenzoyl-DPEDA

Fast and efficient baseline separation of asymmetrically substituted diarylmethanols and 1,1-diarylethanols was achieved on an endcapped, amide-linked N-3,5-dinitrobenzoylated, (R, R)-1,2-diphenyl-1,2-ethanediamine-derived chiral stationary phase (CSP). Optimal enantioselectivities on this CSP were obtained using 1% 2-propanol in n-heptane as the mobile phase. Enantiorecognition was found to be governed by π-basicity and the substitution pattern of the aromatic substituents. © 1996 Wiley-Liss, Inc.     

Immobilization of (1S,2R)-(+)-2-amino-1,2-diphenylethanol derivates on aminated silica gel with different linkages as chiral stationary phases and their enantioseparation evaluation by HPLC

A chiral selector was prepared through the reaction between (1S,2R)-(+)-2-amino-1,2-diphenylethanol and phenyl isocyanate. This selector was immobilized on aminated silica gel, respectively, with bifunctional group linkers of 1,4-phenylene diisocyanate, methylene-di-p-phenyl diisocyanate, and terephthaloyl chloride to produce corresponding three chiral stationary phases. The prepared compounds and chiral stationary phases were characterized by FT-IR, elemental analysis, (1)H NMR, and solid-state (1)H NMR. The enantioseparation ability of these chiral stationary phases was evaluated with structurally various chiral compounds. The chiral stationary phase prepared with 1,4-phenylene diisocyanate as linker showed excellent enantioseparation ability. The influence of different linkages on the enantioseparation was discussed.     

HPLC enantioseparation on cellulose tris(3,5-dimethylphenylcarbamate) as a chiral stationary phase: Influences of pore size of silica gel,coating amount,coating solvent,and column temperature on chiral discrimination

Cellulose tris(3,5-dimethylphenylcarbamate) (CDMPC) was coated on large-pore silica gels and used as a chiral stationary phase (CSP) for high-performance liquid chromatographic separation of enantiomers. The influences of pore size of silica gel, coating amount of CDMPC, coating solvent, and column temperature on chiral discrimination were investigated. CSPs prepared with a large-pore silica gel having a small surface area showed higher chiral recognition. The amount of CDMPC adsorbed on the silica gel influenced the chiral recognition of some racemates. Loading capacity of racemates increased with an increase of the amount of CDMPC supported on the silica gel, and a CSP coated with 45% CDMPC by weight can be used for both analytical and semi-preparative scale separations. The CDMPC, coated using acetone as the coating solvent, exhibited, in many cases, higher enantioselectivity than that obtained with tetrahydrofuran F as the coating solvent. © 1996 Wiley-Liss, Inc.     

A 3D Homochiral MOF [Cd2(d‐cam)3]•2Hdma•4dma for HPLC Chromatographic Enantioseparation

Up to now, some chiral metal‐organic frameworks (MOFs) have been reported for enantioseparation in liquid chromatography. Here we report a homochiral MOF, [Cd2(d‐cam)3]·2Hdma·4dma, used as a new chiral stationary phase for high‐performance liquid chromatographic enantioseparation. Nine racemates of alcohol, naphthol, ketone, and base compounds were used as analytes for evaluating the separation properties of the chiral MOF packed column. Moreover, some effects such as mobile phase composition, column temperature, and analytes mass for separations on this chiral column also were investigated. The relative standard deviations for the resolution values of run‐to‐run and column‐to‐column were less than 2.1% and 3.2%, respectively. The experimental results indicate that the homochiral MOF offered good recognition ability, which promotes the application of chiral MOFs use as stationary phase for enantioseparation. Chirality 28:340–346, 2016. © 2016 Wiley Periodicals, Inc.     

Nanocellulose 3, 5‐Dimethylphenylcarbamate Derivative Coated Chiral Stationary Phase: Preparation and Enantioseparation Performance

Nanocrystalline cellulose (NCC) with high surface area and high ordered crystalline structure was prepared from microcrystalline cellulose (MCC) under the hydrolysis of sodium hypochlorite. NCC was further reacted with 3,5‐dimethylphenyl isocyanate to obtain the nanocellulose derivative, and then coated successfully on the surface of silica gel to a prepared NCC‐coated chiral stationary phase (CSP) as a new kind of chiral separation material. Similarly, MCC derivative‐coated CSP was also prepared as contrast. The chiral separation performance of NCC‐based CSP was evaluated and compared with MCC‐based CSP by high‐performance liquid chromatography. Moreover, the effects of the alcohol modifiers, mobile phase additives, and flow rates on chiral separations were investigated in detail. The results showed that 10 chiral compounds were separated on NCC‐based CSP with better peak shape and higher column efficiency than MCC‐based CSP, which confirmed that NCC‐based CSP was a promising packing material for the resolution of chiral compounds.Chirality 28:376–381, 2016. © 2016 Wiley Periodicals, Inc.     

Immobilization and chiral recognition of 3,5‐dimethylphenylcarbamates of cellulose and amylose bearing 4‐(trimethoxysilyl)phenylcarbamate groups

A small amount of 4‐(trimethoxysilyl)phenyl groups was randomly introduced onto the 3,5‐dimethylphenylcarbamates of cellulose and amylose by a one‐pot method. The obtained derivatives were then effectively immobilized onto silica gel as chiral packing materials (CPMs) for high‐performance liquid chromatography through intermolecular polycondensation of the trimethoxysilyl groups. The effects of the amount of 4‐(trimethoxysilyl)phenyl groups on immobilization and enantioseparation were investigated. Also, the solvent durability of the immobilized‐type CPMs was examined with the eluents containing chloroform and tetrahydrofuran. When these eluents were used, the chiral recognition abilities of the CPMs for most of the tested racemates were improved to some extent depending on the compounds. Chirality 2010. © 2009 Wiley‐Liss, Inc.