Synthesis,characterization and swelling behaviors of sodium alginate-g-poly(acrylic acid)/sodium humate superabsorbent

A novel sodium alginate-g-poly(acrylic acid)/sodium humate superabsorbent was prepared by graft copolymerization with sodium alginate, acrylic acid and sodium humate in aqueous solution, using N,N’-methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. The effects of crosslinker, sodium alginate and sodium humate content on water absorbency of the superabsorbent were studied. The swelling behavior in solutions of various pH and the swelling kinetics in saline solutions (5 mmol/L NaCl and CaCl₂) were also investigated. The results from IR analysis showed that both sodium alginate and sodium humate react with the acrylic acid monomer during the polymerization process. The introduction of sodium humate into the sodium alginate-g-poly(acrylic acid) system could enhance the water absorbency and the superabsorbent containing 10 wt% sodium humate acquired the highest water absorbency (1380 g/g in distilled water and 83 g/g in 0.9 wt% NaCl solution).     

Synthesis of superabsorbent from carbohydrate waste

A mixture of acrylamide (AM) and acrylic acid (AA) monomers were grafted on germinated gelatinized wheat starch using potassium persulfate (KPS) as an initiator to yield superabsorbent. The effects of different parameters such as time, temperature, monomer feed (AM:AA), starch: monomers ratio and initiator concentration on graft add-on were studied, and the optimized values were found to be 2 h, 60 °C, 1:1 (w/w), 1:1(w/w) & 1% (with respect to starch powder), respectively. The product so formed was saponified with 0.1N NaOH, dried and finely powdered sample was characterized using FT-IR, TGA. Product showed maximum absorbency of 150 g/g.     

Synthesis of wheat straw-g-poly(acrylic acid) superabsorbent composites and release of urea from it

Wheat straw (WS) was used as raw material for synthesizing a novel wheat straw-g-poly(acrylic acid) (WS/PAA) superabsorbent composite by graft polymerization with wheat straw powder and acrylic acid in aqueous solution. The effect of wheat straw on water absorbency was discussed and the highest water absorbency was obtained when the amount of wheat straw in the feed was 20%. The superabsorbent composite was characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). The results of FTIR spectra showed OH of WS participated in graft polymerization with acrylic acid. The influences of pH, cations and anions on equilibrium water absorbency of WS/PAA were investigated. The superabsorbent composite was swollen in aqueous solution of urea to load urea, and the results showed urea concentration had no obvious effect on the swelling behaviors of WS/PAA. Furthermore, the release of urea from loaded WS/PAA was analyzed in water and in soil. Urea diffusion coefficient D was calculated.     

Synthesis and characterization of a novel cellulose-g-poly(acrylic acid-co-acrylamide) superabsorbent composite based on flax yarn waste

A new, low-cost, and eco-friendly cellulose-based superabsorbent was successfully prepared from flax yarn waste. The method used was a free-radical graft copolymerization of AA and AM onto a cellulose backbone in a homogeneous aqueous solution. APS was used as the initiator in the presence of a crosslinker, MBA. The effects of various factors on water absorbency were discussed. The factors included reaction temperature, initiator amount, monomer amount, salt solution type, and solution pH. Under the optimized conditions, the water absorbencies of the obtained superabsorbent composite were 875 g/g distilled water, 490 g/g natural rainwater, and 90 g/g 0.9 wt% aqueous NaCl solution. The product also had excellent water retention and salt resistance properties. Fourier-transform infrared spectroscopy and scanning electron microscopy were employed to examine the structure of the prepared superabsorbent.     

Synthesis and characterization of a novel super-absorbent based on wheat straw

In order to develop an eco-friendly polymer, a novel super-absorbent polymer was prepared by graft copolymerization of acrylic acid (AA), acrylic amide (AM) and dimethyl diallyl ammonium chloride (DMDAAC) onto the pretreatment wheat straw (PTWS). The molecular structure of the super-absorbent was confirmed by FTIR. The factors that can influence absorbencies of the super-absorbent resin (SAR) were investigated, such as weight ratio between the monomers, the ratio of PTWS to monomers, the amount of initiator and cross-linker, temperature reaction time and neutralization degree of AA. The SAR has the water absorbency of 133.76 g/g in distilled water and 33.83 g/g in 0.9 wt.% NaCl solution.     

Preparation and properties of a double-coated slow-release NPK compound fertilizer with superabsorbent and water-retention

A double-coated slow-release NPK compound fertilizer with superabsorbent and water-retention was prepared by crosslinked poly(acrylic acid)/diatomite - containing urea (the outer coating), chitosan (the inner coating), and water-soluble granular fertilizer NPK (the core). The effects of the amount of crosslinker, initiator, degree of neutralization of acrylic acid, initial monomer and diatomite concentration on water absorbency were investigated and optimized. The water absorbency of the product was 75 times its own weight if it was allowed to swell in tap water at room temperature for 2 h. Atomic absorption spectrophotometer and element analysis results showed that the product contained 8.47% potassium (shown by K(2)O), 8.51% phosphorus (shown by P(2)O(5)), and 15.77% nitrogen. We also investigated the water-retention property of the product and the slow release behavior of N, P and K in the product. This product with excellent slow release and water-retention capacity, being nontoxic in soil and environment-friendly, could be especially useful in agricultural and horticultural applications.     

Super-absorbent polymers from starch-polyacrylonitrile graft copolymers by acid hydrolysis before saponification

Graft copolymers (SPAN) of polyacrylonitrile (PAN) onto starch were prepared from gelatinized starch varieties with ammonium ceric nitrate as an initiator. The molecular weight of the PAN branches increased for the varieties of starches in the order high amylose maize starch < maize starch < waxy maize starch. SPAN samples were saponified with aqueous NaOH, and the aqueous solution of the resulting polymer (HSPAN) was cast into film in a forced-air oven at 35°C. The water absorbency of the HSPAN film formed from waxy maize starch was the highest (1200 g H₂O (g dry sample)⁻¹) and that from high amylose maize starch was the lowest (530 g g⁻¹). SPAN samples from maize starch were partially hydrolyzed with dilute hydrochloric acid. The resulting polyacrylonitriles with low molecular weight starch end groups (LSPAN) were also saponified. The resulting saponified product (HLSPAN) was cast into film. The absorbencies of HLSPAN films were found to be far larger (up to 6000 g g⁻¹) than those of the corresponding HSPAN films. The absorbency increased with increasing molecular weight of PAN in the initial SPAN up to a molecular weight of 1−1·5 × 10⁶. The absorbency decreased significantly when HSPAN and HLSPAN films were subjected to heat treatment at 135°C or above. The crosslinks present in HSPAN and HLSPAN films prepared at 35°C and those formed during heat treatment were considered to have different structures: the former formed between carbohydrate alkoxide ions and nitrile groups at the early stages of saponification and the latter formed between carbohydrate and copoly(acrylate-acrylamide) chains and/or between copoly(acrylate-acrylamide) chains.     

Synthesis and characterization of a novel super-absorbent based on chemically modified pulverized wheat straw and acrylic acid

In order to develop an eco-friendly polymer, the material was prepared from pulverized wheat straw by chemical methods. And a super-absorbent hydrogel has been synthesized with chemically modified pulverized wheat straw (CMPWS) and acrylic acid (AA) in aqueous solution. Factors, such as weight ratio of AA to CMPWS, the amount of initiator and cross-linker, temperature and neutralization degree of AA that influence absorbencies of super-absorbent were investigated. Moreover, the super-absorbent had been proved with expectant polymerization structure and good thermo-stability via IR spectrum and TGA analysis. The morphological features were evidenced by SEM images. The excellent product was obtained with the absorbencies of 417 g/g in distilled water and 45 g/g in 0.9 wt% NaCl solution.     

Preparation and characterization of a novel pH-sensitive chitosan-g-poly (acrylic acid)/attapulgite/sodium alginate composite hydrogel bead for controlled release of diclofenac sodium

A series of pH-sensitive composite hydrogel beads composed of chitosan-g-poly (acrylic acid)/attapulgite/sodium alginate (CTS-g-PAA/APT/SA) was prepared as drug delivery matrices crosslinked by Ca²⁺ owing to the ionic gelation of SA. The structure and surface morphology of the composite hydrogel beads were characterized by FTIR and SEM, respectively. pH-sensitivity of these composite hydrogels beads and the release behaviors of drug from them were investigated. The results showed that the composite hydrogel beads had good pH-sensitivity. The cumulative release ratios of diclofenac sodium (DS) from the composite hydrogel beads were 3.76% in pH 2.1 solution and 100% in pH 6.8 solutions within 24 h, respectively. However, the cumulative release ratio of DS in pH 7.4 solution reached 100% within 2 h. The DS cumulative release ratio reduced with increasing APT content from 0 to 50 wt%. The drug release was swelling-controlled at pH 6.8.     

Sugarcane bagasse derivative-based superabsorbent containing phosphate rock with water-fertilizer integration

To improve the water-fertilizer utilization ratio and mitigate the environmental contamination, an eco-friendly superabsorbent polymer (SPA), modified sugarcane bagasse/poly (acrylic acid) embedding phosphate rock (MSB/PAA/PHR), was prepared. Ammonia, phosphate rock (PHR) and KOH were admixed in the presence of acrylic acid to provide nitrogen (N), phosphorus (P) and potassium (K) nutrients, respectively. Impacts on water absorption capacity of the superabsorbent polymer (SAP) were investigated. The maximum swelling capacity in distilled water and 0.9wt.% (weight percent) NaCl solution reached 414gg(-1) and 55gg(-1) (water/prepared SAP), respectively. The available NPK contents of the combination system were 15.13mgg(-1), 6.93mgg(-1) and 52.05mgg(-1), respectively. Moreover, the release behaviors of NPK in the MSB/PAA/PHR were also studied. The results showed that the MSB/PAA/PHR has outstanding sustained-release plant nutrients property.     

Radiation-induced eco-compatible sulfonated starch/acrylic acid graft copolymers for sucrose hydrolysis

Radiation-induced graft-copolymers capable of hosting sulfonic groups and having more effective catalytic activity towards sucrose hydrolysis were prepared. Acrylic acid monomer (AA) was copolymerized with sulfonated starch (SS) at different compositions using ionizing radiation. Swelling behavior of the prepared copolymers at different environmental conditions was studied as well as thermal stability. The hydrolysis of sucrose to glucose and fructose by sulfonated starch/acrylic acid (SS/AA) graft copolymers was investigated. The kinetics of the reaction was determined for various (SS/AA) graft copolymers compositions and at a temperature range of 40-60 °C. The catalytic activity of the copolymers was found to be dependent on the reaction temperature and (SS/AA) graft copolymers compositions, it increases as the reaction temperature and sulfonated starch content (in the feed solution) increases. The obtained results suggest that the prepared SS/AA copolymers could be considered as catalytic reagent for sucrose hydrolysis.     

Salivary thiocyanate/nitrite inhibits hydroxylation of 2-hydroxybenzoic acid induced by hydrogen peroxide/Fe(II) systems under acidic conditions: possibility of thiocyanate/nitrite-dependent scavenging of hydroxyl radical in the stomach

Formation of OH radicals in the stomach is possible by Fenton-type reactions, as gastric juice contains ascorbic acid (AA), iron ions and H2O2. An objective of the present study is to elucidate the effects of salivary SCN- and NO2- on the hydroxylation of salicylic acid which was induced by H2O2/Fe(II) and AA/H2O2/Fe(II) systems. Thiocyanate ion inhibited the hydroxylation of salicylic acid by the above systems in acidic buffer solutions and in acidified saliva. The inhibition by SCN- was deduced to be due to SCN- -dependent scavenging of OH radicals. Nitrite ion could enhance the SCN- -dependent inhibition of the hydroxylation induced by AA/H2O2/Fe(II) systems. The enhancement was suggested to be due to scavenging of OH radicals by NO which was formed by the reactions among AA, HNO2 and SCN- contained in the reaction mixture. The concentrations of SCN- and NO2-, which were effective for the inhibition, were in ranges of their normal salivary concentrations. These results suggest that salivary SCN- can cooperate with NO2- to protect stomach from OH radicals formed by AA/H2O2/Fe(II) systems under acidic conditions.     

Preparation and characterization of poly(acrylic acid)-hydroxyethyl cellulose graft copolymer

Poly(acrylic acid) hydroxyethyl cellulose [poly(AA)-HEC] graft copolymer was prepared by polymerizing acrylic acid (AA) with hydroxyethyl cellulose (HEC) using potassium bromate/thiourea dioxide (KBrO(3)/TUD) as redox initiation system. The polymerization reaction was carried out under a variety of conditions including concentrations of AA, KBrO(3) and TUD, material to liquor ratio and polymerization temperature. The polymerization reaction was monitored by withdrawing samples from the reaction medium and measuring the total conversion. The rheological properties of the poly(AA)-HEC graft copolymer were investigated. The total conversion and rheological properties of the graft copolymer depended on the ratio of KBrO(3) to TUD and on acrylic acid concentration as well as temperature and material to liquor ratio. Optimum conditions of the graft copolymer preparation were 30mmol KBrO(3) and 30mmol TUD/100g HEC, 100% AA (based on weight of HEC), duration 2h at temperature 50°C using a material to liquor ratio of 1:10.     

Graft copolymerization of acrylic acid to cassava starch-Evaluation of the influences of process parameters by an experimental design method

The graft copolymerization of cassava starch with acrylic acid was investigated using a free radical initiator system (Fe(2+)/H(2)O(2) redox system) in water. A comprehensive understanding of the important variables and their interaction has been obtained by applying an experimental design method. In this approach, two ('high' and 'low') values of selected variables are considered. Important result parameters are add-on and the grafting efficiency. Out of eight reaction variables, it was found that only temperature, starch concentration and the starch to monomer ratio have a pronounced influence on these response parameters. Moderate reaction temperature (40°C) and high starch concentration (10%) give relatively good results of add-on and grafting efficiency. A low starch to monomer ratio favors add-on but decreases grafting efficiency. These findings can be used to optimize the production of cassava starch-acrylate copolymers and to gain insight in the process-product property interactions, for various applications.     

Simultaneous voltammetric detection of dopamine and uric acid at their physiological level in the presence of ascorbic acid using poly(acrylic acid)-multiwalled carbon-nanotube composite-covered glassy-carbon electrode

The use of poly(acrylic acid) (PAA)-multiwalled carbon-nanotubes (MWNTs) composite-coated glassy-carbon disk electrode (GCE) (PAA-MWNTs/GCE) for the simultaneous determination of physiological level dopamine (DA) and uric acid (UA) in the presence of an excess of ascorbic acid (AA) in a pH 7.4 phosphate-buffered solution was proposed. PAA-MWNTs composite was prepared by mixing of MWNTs powder into 1 mg/ml PAA aqueous solution under sonication. GCE surface was modified with PAA-MWNTs film by casting. AA demonstrates no voltammetric peak at PAA-MWNTs/GCE. The PAA-MWNTs composite is of a high surface area and of affinity for DA and UA adsorption. DA exhibits greatly improved electron-transfer rate and is electro-catalyzed at PAA-MWNTs/GCE. Moreover, the electro-catalytic oxidation of UA at PAA-MWNTs/GCE is observed, which makes it possible to detect lower level UA. Therefore, the enhanced electrocatalytic currents for DA and UA were observed. The anodic peak currents at approximately 0.18 V and 0.35 V increase with the increasing concentrations of DA and UA, respectively, which correspond to the voltammetric peaks of DA and UA, respectively. The linear ranges are 40 nM to 3 microM DA and 0.3 microM to 10 microM UA in the presence of 0.3 mM AA. The lowest detection limits (S/N=3) were 20 nM DA and 110 nM UA.     

Biodegradable superabsorbent hydrogels derived from cellulose by esterification crosslinking with 1,2,3,4-butanetetracarboxylic dianhydride

Superabsorbent hydrogels were prepared from native celluloses dissolved in lithium chloride and N-methyl-2-pyrrolidinone (LiCl/NMP) by esterification crosslinking with 1,2,3,4-butanetetracarboxylic dianhydride (BTCA). Subsequent conversion of the unreacted carboxyl groups to sodium carboxylates by the addition of aqueous NaOH was performed to enhance the water affinity of the gels. The absorbency of the products was strongly dependent on the amount of BTCA that was esterified to cellulose, and the highest absorbency was observed for the hydrogel composed of approximately 0.25 molecules of BTCA per anhydroglucose unit (AGU) of cellulose. Furthermore, it was confirmed that the absorbency was enhanced as the average degree of polymerization (DP) of the starting cellulose increased. The use of cotton cellulose with a high DP of about 2400 produced a hydrogel with an absorbency of 720 times its dry weight, which exceeded the absorbency of commercial crosslinked sodium polyacrylate superabsorbent hydrogel (SPA). The hydrogels exhibited good biodegradability, with a maximum degradation of 95% within 7 days using cellulase.     

Crosslinked carboxymethylchitosan-g-poly(acrylic acid) copolymer as a novel superabsorbent polymer

A novel carboxymethylchitosan-g-poly(acrylic acid) (CMCTS-g-PAA) superabsorbent polymer was prepared through graft polymerization of acrylic acid onto the chain of carboxymethylchitosan and subsequent crosslinking. It was demonstrated by FTIR spectroscopy that acrylic acid had been graft polymerized with carboxymethylchitosan. The thermal stability of the polymer was characterized by thermogravimetric analysis. By studying the swelling ratio of the polymer synthesized under different conditions, optimization conditions were found for a polymer with the highest swelling ratio. The rate of water absorption of the polymer was high, and the swelling of the polymer fitted the process of first dynamics. The swelling ratio of the polymer was pH-dependent.     

复合保水材料对苗木生长的影响

为探索保水剂与外源物质配比形成的复合保水材料对苗木生长的影响,以2年生核桃(Juglans regia)、山杏(Prunus armeniaca)、刺槐(Robinia pseudoacacia)和杨树(Populus sp.)幼苗为实验材料进行盆栽正交实验,以苗木的生长因子(叶面积和新梢生长高度)来评价复合保水材料对苗木的影响。结果表明,不同复合保水材料均能促进苗木的生长,在实验保水剂用量范围保水剂用量增加促进效果增大。杨树最佳配方为处理15(保水剂20g,聚天门冬氨酸1.0g,复合肥0g,土壤含水量7%),在此处理下杨树叶面积比对照增长48%,新梢生长高度比对照增长21%。核桃、山杏、刺槐的最佳配方分别为处理3(保水剂20g,聚天门冬氨酸1.5g,复合肥15g,土壤含水量12%)、处理6(保水剂15g,聚天门冬氨酸0.5g,复合肥0g,土壤含水量12%)、处理10(保水剂15g,聚天门冬氨酸0g,复合肥15g,土壤含水量7%)。     

Itaconic acid production using sago starch hydrolysate by Aspergillus terreus TN484-M1

Sago starch was hydrolyzed using either chemical agents, or enzymes at various pH and concentrations. Hydrolysis using 5000 AUN/ml (0.5%, w/v) glucoamylase exhibited the highest itaconic acid yield up to 0.36 g/g sago starch, whereas hydrolysis using nitric acid at pH 2.0 yielded 0.35 g/g sago starch. The medium was optimized and the composition was (g/l) 140 sago starch, 1.8 corn steep liquor, 1.2 MgSO(4).7H(2)O and 2.9 NH(4)NO(3). When the optimal conditions of hydrolysis and medium composition were applied to itaconic acid production in a 3-l jar fermentor, the itaconic acid production was 48.2 g/l with a yield of 0.34 g/g sago starch. This was filtered from the cultured broth and 37.1g of itaconic acid was recovered with a purity of 97.2%. This result showed that sago starch could be converted to a value-added product with only a simple pretreatment.     

Water‐soluble polymeric chemosensor for selective detection of Hg2+ in aqueous solution using rhodamine‐based modified poly(acrylamide–acrylic acid)

We report the fabrication of a novel easily available turn‐on fluorescent water‐soluble polymeric chemosensor for Hg²⁺ ions that was simply prepared by micellar free radical polymerization of a water‐insoluble organic rhodamine‐based Hg²⁺‐recognizing monomer (GR6GH), with hydrophilic monomers acrylamide (AM) and acrylic acid (AA). The chemical structure of the polymeric sensor was characterized by FT‐IR and ¹H NMR spectroscopy. The apparent viscosity average molecular weight M_η of poly(acrylamide–acrylic acid) [poly(AM–NaAA)] and the water‐soluble polymeric chemosensor poly(AM–NaAA–GR6GH) were 1.76 × 10⁶ and 6.84 × 10⁴ g/mol, respectively. Because of its amphiphilic property, the water‐soluble polymeric chemosensor can be used as a chemosensor in aqueous media. Upon addition of Hg²⁺ ions to an aqueous solution of poly(AM–NaAA–GR6GH), fluorescence enhancements were observed instantly. Moreover, other metal ions did not induce obvious changes to the fluorescence spectra. This approach may provide an easily measurable and inherently sensitive method for Hg²⁺ ion detection in environmental and biological applications. Copyright © 2015 John Wiley & Sons, Ltd.