Sequence and properties of pIM13, a macrolide-lincosamide-streptogramin B resistance plasmid from Bacillus subtilis.

We initiated a study of pIM13, a multicopy, macrolide-lincosamide-streptogramin B (MLS) plasmid first isolated from a strain of Bacillus subtilis and described by Mahler and Halvorson (J. Gen. Microbiol. 120:259-263, 1980). The copy number of this plasmid was about 200 in B. subtilis and 30 in Staphylococcus aureus. The MLS resistance determinant of pIM13 was shown to be highly homologous to ermC, an inducible element on the S. aureus plasmid pE194. The product of the pIM13 determinant was similar in size to that of ermC and immunologically cross-reactive with it. The MLS resistance of pIM13 was expressed constitutively. The complete base sequence of pIM13 is presented. The plasmid consisted of 2,246 base pairs and contained two open reading frames that specified products identified in minicell extracts. One was a protein of 16,000 molecular weight, possibly required for replication. The second was the 29,000-molecular-weight MLS resistance methylase. The regulatory region responsible for ermC inducibility was missing from pIM13, explaining its constitutivity. The remainder of the pIM13 MLS determinant was nearly identical to ermC. The ends of the region of homology between pIM13 and pE194 were associated with hyphenated dyad symmetries. A segment partially homologous to one of these termini on pIM13 and also associated with a dyad was found in pUB110 near the end of a region of homology between that plasmid and pBC16. The entire sequence of pIM13 was highly homologous to that of pE5, an inducible MLS resistance plasmid from S. aureus that differs from pIM13 in copy control.     

Nucleotide sequence and functional map of pE194, a plasmid that specifies inducible resistance to macrolide, lincosamide, and streptogramin type B antibodies.

pE194 is a small plasmid (isolated originally in Staphylococcus aureus) which confers erythromycin-inducible resistance to macrolide, lincosamide, and streptogramin type B (MLS) antibiotics. The nucleotide sequence of pE194 contains 3,728 base pairs (bp), corresponding to a molecular mass of 2.4 million daltons. By means of site-specific cleavage with restriction endonucleases and cloning resultant fragments, determinants of the two major biological functions of p E194, i.e., inducible MLS resistance and replication, could be localized and assigned to specific sequences in the plasmid. Restriction endonuclease TaqI cut pE194 at three sites. TaqI fragment A (1,443 bp) contained the determinant for inducible MLS resistance, whereas TaqI fragment B (1,354 bp) contained a determinant necessary for plasmid replication. Regulatory mutations resulting in constitutive expression of MLS resistance mapped in TaqI fragment A, whereas a mutation associated with elevated plasmid copy number was mapped in TaqI fragment B. Also mapping in TaqI fragment B was a plasmid replication determinant comprising two sets of inverted complementary repeat sequences, one of which spanned 124 bp and was adjacent to a second smaller set which was rich in guanine and cytosine residues. pE194 contained six open reading frames which were theoretically capable of coding for proteins with maximum molecular masses as follows (in daltons): A, 48,300; B, 29,200; C, 14,000; D, 13,900; E, 12,600; and F, 2,700. Insertion of plasmid pBR322 into the single PstI site located in frame A of pE194 resulted in a composite plasmid which could replicate in both Bacillus subtilis and Escherichia coli, suggesting that an intact polypeptide A is dispensable for both replication of pE194 and for MLS resistance. Frame B specified inducible MLS resistance, whereas frame F specified the putative peptide associated with the proposed B determinant translational attenuator. The extent to which frames C, D, and E, all contained in TaqI fragment B, were translated into polypeptide products is not known; however, a base change in frame E was found in a comparison between the high-copy-number mutant, cop-6, and the wild-type strains.     

Naturally occurring Staphylococcus epidermidis plasmid expressing constitutive macrolide-lincosamide-streptogramin B resistance contains a deleted attenuator.

A naturally occurring constitutive macrolide-lincosamide-streptogramin B (MLS) resistance plasmid, pNE131, from Staphylococcus epidermidis was chosen to study the molecular basis of constitutive expression. Restriction and functional maps of pNE131 are presented along with the nucleotide sequence of ermM, the gene which mediates constitutive MLS resistance. Sharing 98% sequence homology within the 870-base-pair Sau3A-TaqI fragment, ermM appears to be almost identical to ermC, the inducible MLS resistance determinant from S. aureus (pE194). The two genes share nearly identical sequences, except in the 5' promoter region of ermM. Constitutive expression of ermM is due to the deletion of 107 base pairs relative to ermC; the deletion removes critical sequences for attenuation, resulting in constitutive methylase expression.     

Nucleotide sequence and functional map of pC194, a plasmid that specifies inducible chloramphenicol resistance.

The nucleotide sequence of pC194, a small plasmid from Staphylococcus aureus which is capable of replication in Bacillus subtilis, has been determined. The genetic determinant of chloramphenicol (CAM) resistance, which includes the chloramphenicol acetyl transferase (CAT) structural gene, the putative promoter and controlling element of this determinant, have been mapped functionally by subcloning a 1,035-nucleotide fragment which specifies the resistance phenotype using plasmid pBR322 as vector. Expression of CAM resistance is autogenously regulated since the 1,035-nucleotide fragment containing the CAT gene sequence and its promoter cloned into pBR322 expresses resistance inducibly in the Escherichia coli host. A presumed controlling element of CAT expression consists of a 37-nucleotide inverted complementary repeat sequence that is located between the -10 and ribosome-loading sequences of the CAT structural gene. Whereas the composite plasmid containing the minimal CAT determinant cloned in pBR322 could not replicate in B. subtilis, ability to replicate in B. subtilis was seen if the fragment cloned included an extension consisting of an additional 300 nucleotides beyond the 5' end of the single pC194 MspI site associated with replication. This 5' extension contained a 120-nucleotide inverted complementary repeat sequence similar to that found in pE194 TaqI fragment B which contains replication sequences of that plasmid. pC194 was found to contain four opening reading frames theoretically capable of coding for proteins with maximum molecular masses, as follows: A, 27,800 daltons; B, 26,200 daltons; C, 15,000 daltons; and D, 9,600 daltons. Interruption or deletion of either frame A or D does not entail loss of ability to replicate or to express CAM resistance, whereas frame B contains the CAT structural gene and frame C contains sequences associated with plasmid replication.     

The nucleotide sequence of Staphylococcus aureus plasmid pT48 conferring inducible macrolide-lincosamide-streptogramin B resistance and comparison with similar plasmids expressing constitutive resistance

The complete nucleotide sequence of a naturally occurring Staphylococcus aureus plasmid, pT48 (from S. aureus strain T48), has been determined. The 2475 bp plasmid confers inducible resistance to macrolide-lincosamide-streptogramin B (MLS) type antibiotics. It is similar to the constitutive MLS resistance plasmid, pNE131, from Staphylococcus epidermidis and shows homology with S. aureus plasmids pSN2 and pE194. It contains a palA structure homologous to that on S. aureus plasmid pT181. The open reading frame, ORF B, within the pSN2 homologous region has a frameshifted C-terminus, relative to pNE131, resulting in a smaller, 158 amino acid putative polypeptide. The pE194 homologous region has the ermC resistance determinant and retains the leader region, deleted in pNE131, required for inducible expression of an adenine methylase. Another naturally occurring S. aureus strain, J74, shows constitutive resistance to erythromycin and contains a small plasmid, pJ74, which is similar to pNE131 but with a different deletion in the leader sequence. The results are consistent with the translational attenuation model for ermC expression.     

Plus-origin mapping of single-stranded DNA plasmid pE194 and nick site homologies with other plasmids.

Staphylococcus aureus plasmid pE194 manifests a natural thermosensitivity for replication and can be established in several species, both gram positive and gram negative, thus making it attractive for use as a delivery vector. Like most characterized plasmids of gram-positive bacteria, pE194 generates single-stranded DNA. The direction of pE194 replication is clockwise, as determined by the strandedness of free single-stranded DNA. Significant homology exists between a 50-base-pair sequence in the origin of pE194 and sequences present in plasmids pMV158 (Streptococcus agalactiae), pADB201 (Mycoplasma mycoides), and pSH71 (Lactococcus lactis). We used an initiation-termination reaction, in which pE194 initiates replication at its own origin and is induced to terminate at the related pMV158 sequence, to demonstrate that pE194 replicates by a rolling-circle mechanism; the initiation nick site was localized to an 8-base-pair sequence.     

Plasmid copy number control: isolation and characterization of high-copy-number mutants of plasmid pE194.

A plasmid, pE194, obtained from Staphylococcus aureus confers resistance to macrolide, lincosamide, and streptogramin type B ("MLS") antibiotics. For full expression, the resistance phenotype requires a period of induction by subinhibitory concentrations of erythromycin. A copy number in the range of 10 to 25 copies per cell is maintained during cultivation at 32 degrees C. It is possible to transfer pE194 to Bacillus subtilis by transformation. In B. subtilis, the plasmid is maintained at a copy number of approximately 10 per cell at 37 degrees C, and resistance is inducible. Tylosin, a macrolide antibiotic which resembles erythromycin structurally and to which erythromycin induces resistance, lacks inducing activity. Two types of plasmid mutants were obtained and characterized after selection on medium containing 10 microgram of tylosin per ml. One mutant class appeared to express resistance constitutively and maintained a copy number indistinguishable from that of the parent plasmid. The other mutant type had a 5- to 10-fold-elevated plasmid copy number (i.e., 50 to 100 copies per cell) and expressed resistance inducibly. Both classes of tylosin-resistant mutants were shown to be due to alterations in the plasmid and not to modifications of the host genome.     

Nucleotide sequence of the constitutive macrolide-lincosamide-streptogramin B resistance plasmid pNE131 from Staphylococcus epidermidis and homologies with Staphylococcus aureus plasmids pE194 and pSN2.

The complete nucleotide sequence of the Staphylococcus epidermidis plasmid pNE131 is presented. The plasmid is 2,355 base pairs long and contains two major open reading frames. A comparison of the pNE131 DNA sequence with the published DNA sequences of five Staphylococcus aureus plasmids revealed strong regional homologies with two of them, pE194 and pSN2. The region of pNE131 containing the reading frame which encodes the constitutive ermM gene is almost identical to the inducible ermC gene region of pE194, except for a 107-base-pair deletion which removes the mRNA leader sequence required for inducible expression. A second region of pNE131 contains an open reading frame with homology to the small cryptic plasmid pSN2 and potentially encodes a 162-amino-acid protein.     

Insertion of foreign DNA into plasmids from gram-positive bacteria induces formation of high-molecular-weight plasmid multimers.

Plasmids pUB110, pC194, pE194, and pT181 are commonly used as cloning vectors in both Bacillus subtilis and Staphylococcus aureus. We report that insertion of foreign DNA into any of these plasmids results in the generation of high-molecular-weight plasmid multimers (HMW) of the recombinant, present as tandem head-to-tail copies. HMW was detected in wild-type B. subtilis and S. aureus strains. The production of HMW depended on the nature of the DNA insertion. Inserts of Escherichia coli DNA, e.g., pBR322 or pUC18, resulted in large amounts of HMW, whereas some inserts of S. aureus DNA of the same size had no effect on plasmid profile. The generation of HMW depended on the mode of plasmid replication; plasmids which replicate via a single-stranded DNA intermediate produced HMW upon foreign DNA insertion, whereas plasmid pAM beta 1, which does not generate single-stranded DNA, did not generate HMW. We propose that HMW is a product of imparied termination of rolling-circle replication and that the impairment is due to the nature of the DNA insertion.     

Replication and incompatibility properties of plasmid pE194 in Bacillus subtilis.

pE194, a 3.5-kilobase multicopy plasmid, confers resistance to the macrolide-lincosamide-streptogramin B antibiotics in Bacillus subtilis. By molecular cloning and deletion analysis we have identified a replication segment on the physical map of this plasmid, which consists of about 900 to 1,000 base pairs. This segment contains the replication origin. It also specifies a trans-acting function (rep) required for the stable replication of pE194 and a negatively acting copy control function which is the product of the cop gene. The target sites for the rep and cop gene products are also within this region. Two incompatibility determinants have been mapped on the pE194 genome and their properties are described. One (incA) resides within the replication region and may be identical to cop. incB, not located in the replication region, expresses incompatibility toward a copy control mutant (cop-6) but not toward the wild-type replicon.     

Replication mutants of Staphylococcus aureus macrolide-lincosamide-streptogramin B resistance plasmid pT48

Copy-number mutants of Staphylococcus aureus macrolide-lincosamide-streptogramin B (MLS) resistance plasmid pT48 were isolated by their resistance to the non-inducing macrolide, tylosin. One mutant plasmid, pcopD3, showed a three- to five-fold cis-dominant increase in copy number, and nucleotide sequence analysis revealed that the mutant had a single base change within the replication region. All other pT48 mutants examined had the unusual phenotype of increased plasmid multimerization and elevated copy number. These mutants were effective in trans and DNA sequencing showed that plasmids with this phenotype were deleted in one of two ways. The deletions caused similar alterations to the C-terminus of the wild-type pT48 Rep protein. The two types of mutant Rep proteins terminate with the same pentapeptide sequence: Ala-Asn-Glu-Ile-Asp. The multimerization phenotype of these mutants can be explained by defective termination of rolling-circle type replication.     

Identification of plasmid and Bacillus subtilis chromosomal recombination sites used for pE194 integration.

The plasmid pE194 (3.7 kilobases) is capable of integrating into the genome of the bacterial host Bacillus subtilis in the absence of the major homology-dependent RecE recombination system. Multiple recombination sites have been identified on both the B. subtilis chromosome and pE194 (J. Hofemeister, M. Israeli-Reches, and D. Dubnau, Mol. Gen. Genet. 189:58-68, 1983). The B. subtilis chromosomal recombination sites were recovered by genetic cloning, and these sites were studied by nucleotide sequence analysis. Recombination had occurred between regions of short nucleotide homology (6 to 14 base pairs) as indicated by comparison of the plasmid and the host chromosome recombination sites with the crossover sites of the integration products. Recombination between the homologous sequences of the plasmid and the B. subtilis genome produced an integrated pE194 molecule which was bounded by direct repeats of the short homology. These results suggest a recombination model involving a conservative, reciprocal strand exchange between the two recombination sites. A preferred plasmid recombination site was found to occur within a 70-base-pair region which contains a GC-rich dyad symmetry element. Five of seven pE194-integrated strains analyzed had been produced by recombination at different locations within this 70-base-pair interval, located between positions 860 and 930 in pE194. On the basis of these data, mechanisms are discussed to explain the recombinational integration of pE194.     

The nucleotide sequence of a small cryptic plasmid found in Staphylococcus aureus and its relationship to other plasmids

The nucleotide sequence of a small (1273 bp) plasmid (pOX1000) of Staphylococcus aureus has been determined and compared with similar plasmids. The sequence includes a single open reading frame; two large palindromes and a 22 bp palindrome that is contiguously repeated three times upstream of the open reading frame. Composite plasmids of pE194ts and pOX1000 were constructed with pUC18 separately inserted into five different sites on pOX1000 and used to analyse the replication functions of the cryptic plasmid.     

Characterization of a macrolide, lincosamide, and streptogramin resistance plasmid in Staphylococcus epidermidis.

A strain of Staphylococcus epidermidis was transduced to erythromycin resistance, and all of the transductants exhibited the macrolide, lincosamide, streptogramin B resistance phenotype. Curing and antibiotic disk studies also indicated that these resistances were controlled by a single plasmid determinant and were constitutive. Agarose gel electrophoresis of plasmid deoxyribonucleic acid (DNA) from donor, cured, and transduced strains showed that a single plasmid was responsible. This plasmid, designated pNE131, was examined for sequence homology to two other plasmids, pE194 and p1258, from Staphylococcus aureus, which also code for erythromycin resistance. DNA from plasmids pNE131 and pE194 hybridized with one another, but no extensive homology to pI258 with either pNE131 or pE194 was found. Restriction endonuclease digests of pNE131 and pE194 showed no common fragments. However, sequence homology was localized to the nucleotides in pE194 that code for the 29,000-dalton protein responsible for erythromycin resistance. pNE131 was calculated to have 2,220 base pairs and is the smallest naturally occurring plasmid with a known function yet reported in S. epidermidis.     

Naturally occurring macrolide-lincosamide-streptogramin B resistance in Bacillus licheniformis.

Resistance to the macrolide-lincosamide-streptogramin B (MLS) group of antibiotics is widespread and of clinical importance. B. Weisblum and his coworkers have demonstrated that this resistance is associated with methylation of the 23S ribosomal ribonucleic acid of the large ribosomal subunit which results in a diminished affinity of this organelle for these antibiotics (Lai et al, J. Mol. Biol. 74:67-72, 1973). We report that 10 of 15 natural isolates of Bacillus licheniformis, a common soil organism, are resistant to the MLS antibiotics. The properties of this resistance (high level of tolerance for erythromycin, broad cross-resistance spectrum, and inducibility) suggest that resistance is conferred as described above. The resistance determinant from one of these strains was cloned onto a B. subtilis plasmid vector, and the resulting hybrid plasmid (pBD90) was used to prepare radioactive probe deoxyribonucleic acid for hybridization studies. All of the resistance B. licheniformis strains studied exhibited homology with the pBD90 insert. Plasmid pBD90 showed no homology to the following staphylococcal and streptococcal MLS-resistance plasmids: pE194, pE5, pAM77, pI258. Plasmids pE194 and pE5, on the other hand, carry homologous MLS genes but showed no detectable homology to one another in their replication genes. pBD90 specified a 35,000-dalton erythromycin-inducible protein, detectable in minicells, which therefore appears different from the 29,000-dalton inducible resistance protein specified by pE194. We conclude that there are at least three distinct MLS resistance determinants to be found among gram-positive bacteria.     

Imprecise excision of plasmid pE194 from the chromosomes of Bacillus subtilis pE194 insertion strains.

Plasmid pE194 has been shown to be rescued by integration after cultivation of infected Bacillus subtilis recE4 cells at a restrictive high temperature. The plasmid is also spontaneously excised from the chromosome at a low frequency by precise or imprecise excision (J. Hofemeister, M. Israeli-Reches, and D. Dubnau, Mol. Gen. Genet. 189:58-68, 1983). We have investigated nine excision plasmids, carrying insert DNA 1 to 6 kbp in length, either in a complete pE194 or in a partially deleted pE194 copy. Type 1 (additive) excision plasmids have the left- and right-junction DNAs preserved as 13-bp direct repeats (5'-GGGGAGAAAACAT-3') corresponding to the region between positions 864 and 876 in pE194. In type 2 (substitutive) excision plasmids, a conserved 13-bp sequence remains only at the right junction while the left junction has been deleted during the excision process. The type 3 excision plasmid carries at each junction the tetranucleotide 5'-TCCC-3', present in pE194 between positions 1995 and 1998. Although we isolated the excision plasmids from different integration mutants, the insert DNAs of eight independently isolated plasmids showed striking sequence homology, suggesting that they originated from one distinct region of the B. subtilis chromosome. Thus, we postulate that imprecise excision of pE194 occurs most frequently after its translocation from the original insertion site into a preferred excision site within the host chromosome. The imprecise excision from this site occurs at excision breakpoints outside the pE194-chromosome junctions in a chromosomal region which remains to be investigated further.     

Structural and genetic analyses of a par locus that regulates plasmid partition in Bacillus subtilis.

The Bacillus plasmid pLS11 partitions faithfully during cell division. Using a partition-deficient plasmid vector, we randomly cloned DNA fragments of plasmid pLS11 and identified the locus that regulates plasmid partition (par) by cis complementation in Bacillus subtilis. The cloned par gene conferred upon the vector plasmid a high degree of segregational stability. The par locus was mapped to a 167-base-pair segment on pLS11, and its nucleotide sequence was determined. The cloned par fragment regulated the partition of several different Bacillus replicons, and it only functioned in cis; it did not contain the replication function nor elevate the plasmid copy number in B. subtilis. The expression of par was orientation specific with respect to the replication origin on the same plasmid. We propose that the pLS11-derived par functions as a single-stranded site that interacts with other components involved in plasmid partition during cell division.     

Comparative study of the symbiotic plasmid DNA in free living bacteria and bacteroids of Rhizobium leguminosarum

Plasmids pIM13, pT127 and pBC16 delta 1, introduced by transformation into Clostridium acetobutylicum N1-4081, were shown to replicate in, and to confer antibiotic resistance upon this new host. Recombinant plasmids were constructed by inserting erythromycin-resistant plasmid pIM13 into the unique ClaI site of pBR322 or by ligating a tetracycline-resistant determinant of plasmid pT127 to HindIII-linearized pIM13. The hybrid plasmids replicated and expressed erythromycin resistance in C. acetobutylicum strain N1-4081 and in Escherichia coli or Bacillus subtilis, indicating that they might be useful as shuttle vectors for transferring genes between these strains. The efficiency and stability of different replicons in C. acetobutylicum were compared.     

Replication in yeasts of plasmid pE194 from Staphylococcus aureus

The ability of the plasmid pE194 from S. aureus to serve as an autonomously replicating sequence (ARS) in yeast was shown. The hybrid plasmid pLD744 that contains pE194 and the yeast LEU2 gene sequences is unstable in yeast like other YRp-vectors: the mitotic stability of the pLD744 was as much as 1%. The plasmid pLD712 that differs from pLD744 by the existence of a centromeric sequence from the chromosome III of yeast Saccharomyces cerevisiae reveals about one order greater stability. The observation that there are some sequences in the primary structure of the pE194 which strongly conform to the ARS consensus in yeast inclines us to infer that the existence of ARS consensus on pE194 DNA is not sufficient for its effective replication in yeast.