Genomic instability and mobile genetic elements in regions surrounding two discoidin I genes of Dictyostelium discoideum.

We have found that the genomic regions surrounding the linked discoidin I genes of various Dictyostelium discoideum strains have undergone rapid changes. Wild-type strain NC-4 has three complete discoidin I genes; its axenic derivative strain Ax-3L has duplicated a region starting approximately 1 kilobase upstream from the two linked genes and extending for at least 8 kilobases past the genes. A separately maintained stock, strain Ax-3K, does not have this duplication but has undergone a different rearrangement approximately 3 kilobases farther upstream. We show that there are repeat elements in these rapidly changing regions. At least two of these elements, Tdd-2 and Tdd-3, have characteristics associated with mobile genetic elements. The Tdd-3 element is found in different locations in related strains and causes a 9- to 10-base-pair duplication of the target site DNA. The Tdd-2 and Tdd-3 elements do not cross-hybridize, but they share a 22-base-pair homology near one end. At two separate sites, the Tdd-3 element has transposed into the Tdd-2 element, directly adjacent to the 22-base-pair homology. The Tdd-3 element may use this 22-base-pair region as a preferential site of insertion.     

The Use of Restriction Fragment Length Polymorphisms and DNA Duplications to Study the Organization of the Actin Multigene Family in DICTYOSTELIUM DISCOIDEUM

The techniques of restriction fragment length polymorphism analysis and examination of gene copy number in duplication-bearing Dictyostelium discoideum strains have been used to map four actin genes of the wild-type strain NC4 to specific linkage groups. In part, this was accomplished by identification of restriction fragments corresponding to particular cloned actin genes using gene-specific probes from unique sequence 5' and 3' untranslated regions. Cloned gene Actin 8 (designation act-8) maps to linkage group I; Actins 12 (act-12) and M6 (actM6) to linkage group II. An uncloned gene (act-100) also maps to linkage group II in the same region as actM6, as defined by a chromosomal duplication. From analysis of other wild isolates of D. discoideum, it was determined that in these isolates at least two actin genes map to linkage group I and at least four map to linkage group II. These results demonstrate the utility of molecular techniques in genetic analysis of Dictyostelium, particularly for developmentally regulated genes that have been cloned but that have no identified mutant phenotypes.     

Multiple regulatory genes control expression of a gene family during development of Dictyostelium discoideum.

Mutant strains of Dictyostelium discoideum carrying dis mutations fail to transcribe specifically the family of developmentally regulated discoidin lectin genes during morphogenesis. The phenotypes of these mutants strongly suggested that the mutations reside in regulatory genes. Using these mutant strains, we showed that multiple regulatory genes are required for the expression of the lectin structural genes and that these regulatory genes (the dis+ alleles) act in trans to regulate this gene family. These regulatory genes fall into two complementation groups (disA and disB) and map to linkage groups II and III, respectively. A further regulatory locus was defined by the identification of an unlinked supressor gene, drsA (discoidin restoring), which is epistatic to disB, but not disA, and results in the restoration of lectin expression in cells carrying the disB mutation. Mutant cells carrying the drsA allele express the discoidin lectin gene family during growth and development, in contrast to wild-type cells which express it only during development. Therefore, the suppressor activity of the drsA allele appears to function by making the expression of the discoidin lectins constitutive and no longer strictly developmentally regulated. The data indicate that normal expression of the discoidin lectins is dependent on the sequential action of the disB+, drsA+, and disA+ gene products. Thus, we described an interacting network of regulatory genes which in turn controls the developmental expression of a family of genes during the morphogenesis of D. discoideum.     

Mota1552, a Mutation of Dictyostelium Discoideum Having Pleiotropic Effects on Motility and Discoidin I Regulation

The Dictyostelium discoideum mutant MC2 exhibits temperature-sensitive growth, temperature-sensitive motility, and temperature induction of discoidin I synthesis. These three phenotypes of MC2 were not separated in the genetic experiments reported here. They were therefore assigned to the mutation motA1552, which was mapped to linkage group II by segregation analysis and by analysis of mitotic recombinant diploids. In one motA1552 strain, loss of motility preceded accumulation of discoidin I by 3 hr, indicating that discoidin I is not involved in generation of the motility defect. Expression of motA1552 phenotypes varied both among strains carrying the mutation, and among different clones of a particular strain. MC2 and its derivatives displayed elevated levels of recombination between whiA and acrA on linkage group II, and yielded highly unstable mutations at the acrA locus. Accumulation of large amounts of discoidin I during axenic growth of strain AX3 was found to depend on the presence of a second linkage group II mutation, daxA1551. This mutation was already present in the strain mutagenized to isolate motA1552, complicating explication of motA1552 action.     

A genetic map of Blumeria graminis based on functional genes, avirulence genes, and molecular markers

A genetic map of the powdery mildew fungus, Blumeria graminis f. sp. hordei, an obligate biotrophic pathogen of barley, is presented. The linkage analysis was conducted on 81 segregating haploid progeny isolates from a cross between 2 isolates differing in seven avirulence genes. A total of 359 loci were mapped, comprising 182 amplified fragment length polymorphism markers, 168 restriction fragment length polymorphism markers including 42 LTR-retrotransposon loci and 99 expressed sequence tags (ESTs), all the seven avirulence genes, and a marker closely linked to the mating type gene. The markers are distributed over 34 linkage groups covering a total of 2114 cM. Five avirulence genes were found to be linked and mapped in clusters of three and two, and two were unlinked. The Avr(a6) gene was found to be closely linked to markers suitable for a map-based cloning approach. A linkage between ESTs allowed us to demonstrate examples of synteny between genes in B. graminis and Neurospora crassa.     

Genomic organization of the transposable element Tdd-3 from Dictyostelium discoideum.

The transposable element Tdd-3 from D. discoideum has been described originally in 1984 (Poole and Firtel, 1984). Additional copies of this element were discovered in the course of a recent study on tRNA gene organization in D. discoideum. Five out of 24 independently isolated tRNA genes proved to be associated with Tdd-3 elements. The surprising observation that all the elements always occurred within the 3'-flanking sequences of the Dictyostelium tRNA genes suggested the possibility of a general position specific integration of Tdd-3 elements upon transposition. Therefore we isolated additional Tdd-3 elements from various genomic D. discoideum libraries in order to test this hypothesis. Several new Tdd-3 elements were found associated with various tRNA genes. Additionally we identified Tdd-3 elements organized in tandem array or in association with RED (Repetitive Element of Dictyostelium), another repetitive element recently identified by our laboratory. In all cases a B-box equivalent of the eukaryotic gene-internal RNA polymerase III promoter was identified upstream of all Tdd-3 elements.     

Carrier detection in haemophilia B using two further intragenic restriction fragment length polymorphisms.

A normal human population has been screened for the existence of further restriction fragment length polymorphisms (RFLPs) in the clotting factor IX gene in addition to the TaqI polymorphism already characterised (1,2). Two polymorphic loci were found, both within 6 Kb of the TaqI polymorphism within the body of the factor IX gene. One of the polymorphisms has been shown to be due to either the presence or absence of a particular recognition site for the restriction enzyme XmnI. The other, visualised as a difference in fragment pattern produced by digestion with either HinfI or DdeI, has two allelic forms differing by a 50 bp element of inserted DNA. Sequence analysis has shown the inserted element to be in a region of Z type DNA sequence, the insertion representing a duplication of flanking sequence on either side. The two polymorphisms are inherited in simple Mendelian fashion and have both been used to diagnose haemophilia B carrier status. It is estimated that the combined use of these polymorphisms in the factor IX gene, despite linkage disequilibrium between the 3 polymorphic loci, should enable carrier status to be determined in approximately 66% of all haemophilia B families.     

Genetic polymorphism of a bovine t-complex gene (TCP1) linkage to major histocompatibility genes

Southern blot analysis of genomic cattle DNA was carried out using murine cDNA probes representing the Tcp-1 gene of the t complex. Excellent cross-hybridization was obtained, and the probes apparently hybridized to at least two bovine TCP1 genes. Two independent restriction fragment length polymorphisms, each composed of two allelic variants, were detected; the inheritance of the restriction fragment length polymorphisms was confirmed by family data. One of the restriction fragment length polymorphisms, designated TCP1B, was evidently due to a gene duplication and was revealed with any restriction enzyme used. The duplication was found in three different cattle breeds investigated. Family segregation data indicated that TCP1B is linked to major histocompatibility complex genes. The result was consistent with close linkage to the major histocompatibility complex class II DO beta gene, whereas a fairly high recombination frequency was indicated between TCP1B/DO beta and other major histocompatibility complex genes. The result assigns TCP1B to a bovine linkage group previously comprising major histocompatibility complex class I and class II genes and blood group locus M. The similarity between this linkage group and parts of mouse chromosome 17 (t-H-2) and human chromosome 6 (TCP1-HLA) is discussed.     

Transfer RNA genes from Dictyostelium discoideum are frequently associated with repetitive elements and contain consensus boxes in their 5' and 3'-flanking regions.

A total of 68 different tRNA genes from the cellular slime mold Dictyostelium discoideum have been isolated and characterized. Although these tRNA genes show features common to typical nuclear tRNA genes from other organisms, several unique characteristics are apparent: (1) the 5'-proximal flanking region is very similar for most of the tRNA genes; (2) more than 80% of the tRNA genes contain an "ex-B motif" within their 3'-flanking region, which strongly resembles characteristics of the consensus sequence of a T-stem/T-loop region (B-box) of a tRNA gene; (3) probably more than 50% of the tRNA genes in certain D. discoideum strains are associated with a retrotransposon, termed DRE (Dictyostelium repetitive element), or with a transposon, termed Tdd-3 (Transposon Dictyostelium discoideum). DRE always occurs 50 (+/- 3) nucleotides upstream and Tdd-3 always occurs 100 (+/- 20) nucleotides downstream from the tRNA gene. D. discoideum tRNA genes are organized in multicopy gene families consisting of 5 to 20 individual genes. Members of a particular gene family are identical within the mature tRNA coding region while flanking sequences are idiosyncratic.     

Somatic cell mapping, polymorphism, and linkage analysis of bovine prolactin-related proteins and placental lactogen.

The bovine prolactin gene family includes novel members expressed in the fetal placenta that are distinct from placental lactogen. In this study, we investigated the genetic organization of four members of this gene family (PRP1, PRP3, PRP6, and PRP10) as well as placental lactogen (PL). Using a bovine-rodent hybrid somatic cell panel, all five genes were assigned to bovine chromosome 23, which contains prolactin and the major histocompatibility group (BOLA). Restriction fragment length polymorphisms were detected by all probes in breeding populations with the restriction enzyme MspI, whereas no polymorphisms were detected with BamHI. EcoRI, HindIII, TaqI, and PstI produced polymorphic fragments with some but not all of the probes tested. A PRP10 polymorphism, which is apparently the result of a insertion/deletion event, detected polymorphism frequency differences between Bos indicus and Bos taurus. No recombinational events were observed with these probes and prolactin using linkage analysis involving 91 American Holsteins. The bovine prolactin gene family was incorporated into a linkage group containing CYP21. Our studies demonstrate that members of the bovine prolactin gene family have a close physical association with each other, and all members demonstrate genetic variability in the breeding population.     

Multiple restriction fragment length polymorphisms in the porcine calcium release channel gene (CRC): assignment to the halothane (HAL) linkage group

Two cDNA probes for the porcine calcium release channel gene (CRC) were used in restriction fragment length polymorphism (RFLP) analysis in an attempt to develop genetic markers linked to the malignant hyperthermia (stress susceptibility) gene (HAL). Three TaqI RFLPs, denoted CRC1-CRC3, each composed of two alleles, were detected. RFLPs were also detected with MspI and PvuII, but the MspI RFLP correlated completely with CRC3 in this material and the PvuII RFLP could not be scored reliably due to a minute size difference between the two allelic fragments. The autosomal codominant inheritance of these RFLP loci was confirmed by family analyses. Significant evidence for genetic linkage between the CRC1/CRC3 loci and the A1BG locus in the HAL linkage group confirmed a previous assignment of the CRC gene to chromosome 6 in the pig.     

Density-dependent induction of discoidin-I synthesis in exponentially growing cells of Dictyostelium discoideum

The synthesis of the lectin, discoidin I, by vegetative cells of Dictyostelium discoideum (strain NC4) was monitored using immunoblot analysis and indirect immunofluorescence. Suspension cultures were used, so that the D. discoideum cell density and the concentration of bacteria could be controlled. Discoidin-I production was found to be a function of the relative densities of D. discoideum cells and food bacteria. Synthesis was initiated in exponentially growing D. discoideum cells approximately three generations before depletion of the food supply. In the growth medium of cells producing discoidin I, a soluble activity was detected that caused low-density cells to begin discoidin-I synthesis. This activity was not dialyzable and was destroyed by heat. A similar activity was produced by AX3 cells during axenic growth. Density-dependent induction of other 'early developmental' proteins was also detected in wild-type cells. These findings suggest that the expression of several 'early developmental' genes is regulated by a mechanism that measures cell density relative to food supply, not by starvation per se.     

A Genetic Map of Lettuce (Lactuca sativa L.) with Restriction Fragment Length Polymorphism, Isozyme, Disease Resistance and Morphological Markers

A detailed linkage map of lettuce was constructed using 53 genetic markers including 41 restriction fragment length polymorphism (RFLP) loci, five downy mildew resistance genes, four isozyme loci and three morphological markers. The genetic markers were distributed into nine linkage groups and cover 404 cM which may be 25-30% of the lettuce genome. The majority (31 of 34) of the RFLP probes detected single segregating loci, although seven of these may have been homologous to further monomorphic loci. When several loci were detected by a single probe, the loci were generally linked, suggesting tandem duplications. One probe, however, detected loci in three linkage groups suggesting translocations. The five downy mildew resistance genes (Dm1, Dm3, Dm4, Dm5/8 and Dm13), segregating in the Calmar x Kordaat cross, represented each of the four resistance gene linkage groups. Dm5/8 is flanked by two cDNA loci, each located 10 cM away. These flanking markers will be used to study the source of variation in downy mildew genes and are also part our strategy to clone resistance genes.     

Integrated Maps of the Chromosomes in Dictyostelium Discoideum

Detailed maps of the six chromosomes that carry the genes of Dictyostelium discoideum were constructed by correlating physically mapped regions with parasexually determined linkage groups. Chromosomally assigned regions were ordered and positioned by the pattern of altered fragment sizes seen in a set of restriction enzyme mediated integration-restriction fragment length polymorphism (REMI-RFLP) strains each harboring an inserted plasmid that carries sites recognized by NotI, SstII, SmaI, BglI and ApaI. These restriction enzymes were used to digest high molecular weight DNA prepared from more than 100 REMI-RFLP strains and the resulting fragments were separated and sized by pulsed-field gels. More than 150 gene probes were hybridized to blots of these gels and used to map the insertion sites relative to flanking restriction sites. In this way, we have been able to restriction map the 35 mb genome as well as determine the map position of more than 150 genes to with ~40 kb resolution. These maps provide a framework for subsequent refinement.