Production of 1,3-propanediol by <Emphasis Type="Italic">Clostridium butyricum</Emphasis> VPI 3266 using a synthetic medium and raw glycerol

Growth inhibition of Clostridium butyricum VPI 3266 by raw glycerol, obtained from the biodiesel production process, was evaluated. C. butyricum presents the same tolerance to raw and to commercial glycerol, when both are of similar grade, i.e. above 87% (w/v). A 39% increase of growth inhibition was observed in the presence of 100 g l^–1 of a lower grade raw glycerol (65% w/v). Furthermore, 1,3-propanediol production from two raw glycerol types (65% w/v and 92% w/v), without any prior purification, was observed in batch and continuous cultures, on a synthetic medium. No significant differences were found in C. butyricum fermentation patterns on raw and commercial glycerol as the sole carbon source. In every case, 1,3-propanediol yield was around 0.60 mol/mol glycerol consumed.     

Production of 1,3-Propanediol by Clostridium butyricum VPI 3266 in continuous cultures with high yield and productivity

The effects of dilution rate and substrate feed concentration on continuous glycerol fermentation by Clostridium butyricum VPI 3266, a natural 1,3-propanediol producer, were evaluated in this work. A high and constant 1,3-propanediol yield (around 0.65 mol/mol), close to the theoretical value, was obtained irrespective of substrate feed concentration or dilution rate. Improvement of 1,3-propanediol volumetric productivity was achieved by increasing the dilution rate, at a fixed feed substrate concentration of 30, 60 or 70 g l⁻¹. Higher 1,3-propanediol final concentrations and volumetric productivities were also obtained when glycerol feed concentration was increased from 30 to 60 g l⁻¹, at D=0.05–0.3 h⁻¹, and from 60–70 g l⁻¹, at D=0.05 and 0.1 h⁻¹·30 g l⁻¹ of 1,3-propanediol and the highest reported value of productivity, 10.3 g l⁻¹ h⁻¹, was achieved at D=0.30 h⁻¹ and 60 g l⁻¹ of feed glycerol. A switch to an acetate/butyrate ratio higher than one was observed for 60 g l⁻¹ of feed glycerol and a dilution rate higher than 0.10 h⁻¹; moreover, at D=0.30 h⁻¹ 3-hydroxypropionaldehyde accumulation was observed for the first time in the fermentation broth of C. butyricum.     

Glycerol conversion to 1,3-propanediol by newly isolated clostridia

Summary From pasteurized mud and soil samples glycerol-fermenting clostridia that produced 1,3-propanediol, butyrate and acetate were obtained. The isolates were taxonomically characterized and identified as Clostridium butyricum. The most active strain, SH1 = DSM 5431, was able to convert up to 110 g/l of glycerol to 56 g/l of 1,3-propanediol in 29 h. A few Clostridium strains from culture-collections (3 out of 16 of the C. butyricum group) and some isolates of Kutzner from cheese samples were also able to ferment glycerol, but the final concentration and the productivity of 1,3-propanediol was lower than in strain SH1. Strain SH1 grew well in a pH range between 6.0 and 7.5, with a weak optimum at 6.5, and was stimulated by sparging with N₂. Best overall productivity was obtained in fed-batch culture with a starting concentration of 5% glycerol. In all fermentations the yield of 1,3-propanediol in relation to glycerol was higher than expected from NADH production by acid formation. On the other hand the H₂ production was lower than expected, if per mole of acetyl coenzyme A one mole of H₂ is released. The observations point to a substantial transfer of reducing potential from ferredoxin to NAD, which finally results in increased 1,3-propanediol production.     

The fermentation of glycerol byClostridium butyricum LMG 1212t2 and 1213t1 andC. pasteurianum LMG 3285

Summary In batch culture on reiinforced clostridial medium strain-dependent product profiles from glycerol revealed unusual fermentation products such as propionate and n-propanol with Clostridium butyricum LMG 1213t₁, and 1,3-propanediol with C. butyricum LMG 1212t₂ and C. pasteurianium LMG 3285. Only the latter two strains were able to grow on glycerol in a minimal medium. Nicotinamide adenine dinucleotide (NAD⁺)-dependent dehydrogenase activities were detected with 1,3-propanediol and n-butanol as substrate (the latter only after a lag period) in cell-free extracts of C. butyricum LMG 1212t₂ and with 1,3-propanediol, n-butanol and ethanol in cell-free extracts of C. pasteurianum LMG 3285. The data indicated the existance of a specific 1,3-propanediol dehydrogenase in both organisms. In a chemostat, C. butyricum LMG 1212t₂ converted 65% of the glycerol supplied as sole carbon and energy source to 1,3-propanediol without H₂ production. Increasing concentration of acetate in the inflow medium resulted in less 1,3-propanediol and more butyrate and H₂ production. C. pasteurianum LMG 3285 converted somewhat more than half of the glycerol supplied as sole energy and carbon source to n-butanol with significant concomitant H₂ production. This fermentation pattern was hardly affected by acetate as co-substrate. Offprint requests to: P. De Vos     

An improved screening method for microorganisms able to convert crude glycerol to 1,3-propanediol and to tolerate high product concentrations

A new screening method was developed and established to find high-performance bacteria for the conversion of crude glycerol to 1,3-propanediol. Three soil samples from palm oil-rich habitats were investigated using crude glycerol of a German biodiesel plant. Nine promising 1,3-propanediol producers could be found. Because of a special pH buffer system, a fast evaluation on microscale and high 1,3-propanediol concentrations up to 40 g L⁻¹ could be achieved. Three strains demonstrated very high product tolerance and were identified as Clostridium butyricum. Two strains, AKR91b and AKR102a, grew and produced 1,3-propanediol in the presence of 60 g L⁻¹ initial 1,3-propanediol, the strain AKR92a even in the presence of 77 g L⁻¹ 1,3-propanediol. The strains AKR91b and AKR102a tolerated up to 150 g L⁻¹ crude glycerol and produced 80% of the 1,3-propanediol attained from pure glycerol of the same concentration. Further criteria for the choice of a production strain were the pathogenicity (risk class), ability to grow on low-cost media, e.g., with less yeast extract, and robustness, e.g., process stability after several bioconversions. Overall, the strain C. butyricum AKR102a was chosen for further process optimization and scale-up due to its high productivity and high final concentration in a pH-regulated bioreactor.     

High production of 1,3-propanediol from glycerol by Clostridium butyricum VPI 3266 in a simply controlled fed-batch system

Summary A simple fed-batch system which controls substrate feeding by measuring the CO₂ produced during the fermentation, was developped. This Fed-batch approach allowed high production of 1,3-propanediol from glycerol by Clostridium butyricum by avoiding substrate inhibition phenomena. 65 g/l of 1,3-propanediol was produced with a productivity of 1.21 g/l.h and a yield of 0.56. The concentration of 1,3-propanediol obtained and the productivity were significantly higher than those reached in batch culture.     

Fermentation of glycerol to 1,3-propanediol: use of cosubstrates

Three fermentable substances, glucose, 1,2-ethanediol and 1,2-propanediol were checked as cosubstrates for the fermentation of glycerol by Clostridium butyricum and Citrobacter freundii with the aim of achieving a complete conversion of glycerol to 1,3-propanediol. Glucose was fermented by C. butyricum mainly to acetate, CO₂ and reducing equivalents in the presence of glycerol and contributed markedly to the 1,3-propanediol yield. However, because of relatively slow growth on glucose, complete conversion was not achieved. If the two glycols were used as cosubstrates for glycerol fermentation, the 1,3-propanediol yield did not increase but dimished considerably, as they were converted to more reduced products, i.e. alcohols instead of acids. From 1,2-propanediol 2-propanol was formed in addition to 1-propanol. The ratio of the propanols was dependent on the culture conditions.     

Effects of Acetate and Butyrate During Glycerol Fermentation by Clostridium butyricum

The effects of acetate and butyrate during glycerol fermentation to 1,3-propanediol at pH 7.0 by Clostridium butyricum CNCM 1211 were studied. At pH 7.0, the calculated quantities of undissociated acetic and butyric acids were insufficient to inhibit bacterial growth. The initial addition of acetate or butyrate at concentrations of 2.5 to 15 gL⁻¹ had distinct effects on the metabolism and growth of Clostridium butyricum. Acetate increased the biomass and butyrate production, reducing the lag time and 1,3-propanediol production. In contrast, the addition of butyrate induced an increase in 1,3-propanediol production (yield: 0.75 mol/mol glycerol, versus 0.68 mol/mol in the butyrate-free culture), and reduced the biomass and butyrate production. It was calculated that reduction of butyrate production could provide sufficient NADH to increase 1,3-propanediol production. The effects of acetate and butyrate highlight the metabolic flexibility of Cl. butyricum CNCM 1211 during glycerol fermentation. Received: 2 January 2001 / Accepted: 6 February 2001     

Microbial Conversion of Glycerol to 1,3-Propanediol: Physiological Comparison of a Natural Producer, Clostridium butyricum VPI 3266, and an Engineered Strain, Clostridium acetobutylicum DG1(pSPD5)

Clostridium acetobutylicum is not able to grow on glycerol as the sole carbon source since it cannot reoxidize the excess of NADH generated by glycerol catabolism. Nevertheless, when the pSPD5 plasmid, carrying the NADH-consuming 1,3-propanediol pathway from C. butyricum VPI 3266, was introduced into C. acetobutylicum DG1, growth on glycerol was achieved, and 1,3-propanediol was produced. In order to compare the physiological behavior of the recombinant C. acetobutylicum DG1(pSPD5) strain with that of the natural 1,3-propanediol producer C. butyricum VPI 3266, both strains were grown in chemostat cultures with glycerol as the sole carbon source. The same “global behavior” was observed for both strains: 1,3-propanediol was the main fermentation product, and the qH₂ flux was very low. However, when looking at key intracellular enzyme levels, significant differences were observed. Firstly, the pathway for glycerol oxidation was different: C. butyricum uses a glycerol dehydrogenase and a dihydroxyacetone kinase, while C. acetobutylicum uses a glycerol kinase and a glycerol-3-phosphate dehydrogenase. Secondly, the electron flow is differentially regulated: (i) in C. butyricum VPI 3266, the in vitro hydrogenase activity is 10-fold lower than that in C. acetobutylicum DG1(pSPD5), and (ii) while the ferredoxin-NAD⁺ reductase activity is high and the NADH-ferredoxin reductase activity is low in C. acetobutylicum DG1(pSPD5), the reverse is observed for C. butyricum VPI 3266. Thirdly, lactate dehydrogenase activity is only detected in the C. acetobutylicum DG1(pSPD5) culture, explaining why this microorganism produces lactate.     

Construction of a novel recombinant Escherichia coli strain capable of producing 1,3–propanediol and optimization of fermentation parameters by statistical design

Summary The structural gene yqhD from a wild-type Escherichia coli encoding 1,3-propanediol oxidoreductase isoenzyme and the structural gene dhaB from Citrobacter freundii encoding glycerol dehydratase were amplified by using the PCR method. The temperature control expression vector pHsh harboring the yqhD and dhaB genes was transformed into E. coli JM109 to yield the recombinant strain E. coli JM109 (pHsh-dhaB-yqhD). The response surface method (RSM) was then applied to further optimize the fermentation condition of the recombinant strain. A mathematical model was then developed to show the effect of each medium composition and their interactions on the production of 1,3-propanediol by recombinant strain E. coli JM109. The model estimated that a maximal yield of 1,3-propanediol (43.86 g/l) could be obtained when the concentrations of glycerol, yeast extract and vitamin B₁₂ were set at 61.8 g/l, 6.2 g/l and 49 mg/l, respectively; and the fermentation time was 30 h. These predicted values were also verified by validation experiments. Compared with the values obtained by other runs in the experimental design, the optimized medium resulted in a significant increase in the yield of 1,3-propanediol. The yield and productivity under the optimal parameters and process can reach 43.1 g/l and 1.54 g/l/h. Maximum 1,3-propanediol yield of 41.1 g/l was achieved in a 5-l fermenter using the optimized medium. This makes the engineered strain have potential application in the conversion of glycerol to 1,3-propanediol on an industrial scale.     

Isolation and characterization of microorganisms able to produce 1,3-propanediol under aerobic conditions

Microbial fermentation under strictly anaerobic conditions has been conventionally used for the production of 1,3-propanediol, a key raw material required for the synthesis of polytrimethylene terephthalate (PTT) and other polyester fibers. In the current study, we have identified eight strains of microorganism which are able to produce 1,3-propanediol under aerobic condition. Those strains were isolated from garden soil, which were enriched by culturing in LB medium with glycerol added under aerobic condition. The identities of those strains were established based on their 16S rRNA sequences and physiological characteristics. Results indicated 6 strains are Citrobacter freundii and 2 strains are Klebsiella pneumoniae subsp Penumoniae. One of Klebsiella pneumoniae subsp Penumoniae strains, designated as TUAC01, demonstrated comparable levels of 1,3-propanediol oxidoreductase, glycerol dehydratase and glycerol dehydrogenase activity to the anaerobic microorganisms described in the literature. Accordingly, in larger scales (5 l) fed-batch culture the TUAC01 strain showed a remarkable 1,3-propanediol producing potency under aerobic conditions. 60.1 g/l of 1,3-propanediol was yield after 42 h incubation in an agitating bioreactor; and in air-lift bioreactor 66.3 g/l of 1,3-propanediol was yield after 58.5 h incubation. The aerobic ferment process, reduced the product cost and made the biological method of 1,3-propanediol production more attractive.     

Inhibition of Clostridium butyricum by 1,3-propanediol and diols during glycerol fermentation

1,3-Propanediol inhibition during glycerol fermentation to 1,3-propanediol by Clostridium butyricum CNCM 1211 has been studied. The initial concentration of the 1,3-propanediol affected the growth of the bacterium more than the glycerol fermentation. μ _max was inversely proportional to the initial concentration of 1,3-propanediol (0–65 g l⁻¹). For glycerol at 20 g l⁻¹, the growth and fermentation were completely stopped at an initial 1,3-propanediol concentration of 65 g l⁻¹. However, for an initial 1,3-propanediol concentration of 50 g l⁻¹ and glycerol at 70 g l⁻¹, the final concentration (initial and produced) of 1,3-propanediol reached 83.7 g l⁻¹(1.1 M), with complete consumption of the glycerol. Therefore, during the fermentation, the strain tolerated a 1,3-propanediol concentration higher than the initial inhibitory concentration (65 g l⁻¹). The addition of 1,2-propanediol or 2,3-butanediol (50 g l⁻¹) in the presence of glycerol (50–100 g l⁻¹), showed that 2-diols reduced the μ _max in a similar way to 1,3-propanediol. The measurement of the osmotic pressure of glycerol solutions, diols and diol/glycerol mixtures did not indicate any differences between these compounds. The hypothesis of diol inhibition was discussed. Taking into account the strain tolerance of highly concentrated 1,3-propanediol during fermentation, the fermentation processes for optimising production were considered. Received: 15 November 1999 / Revision received: 1 February 2000 / Accepted: 4 February 2000     

Production of 1,3-Propanediol from Glycerol by Clostridium acetobutylicum and Other Clostridium Species

Glycerol was fermented with the production of 1,3-propanediol as the major fermentation product by four strains of Clostridium acetobutylicum, six of C. butylicum, two of C. beijerinckii, one of C. kainantoi, and three of C. butyricum. 1,3-Propanediol was identified by its retention times in gas chromatography and high-pressure liquid chromatography and by its mass spectrum. During growth of C. butylicum B593 in a chemostat culture at pH 6.5, 61% of the glycerol fermented was converted to 1,3-propanediol. When the pH was decreased to 4.9, growth and 1,3-propanediol production were substantially reduced.     

1,3-Propanediol oxidoreductase production with Klebsiella pneumoniae DSM2026

We report a Klebsiella pneumoniae DSM2026 fermentation procedure for the efficient production of a key enzyme of 1,3-propanediol formation: 1,3-propanediol oxidoreductase (E.C. 1.1.1.202). The fermentation process is composed of an aerobic batch phase on glucose and glycerol and an anaerobic phase on glycerol. The role of the aerobic phase is to produce sufficiently high cell mass (12.9–14.6 g/l dry weight) and to activate the aerobic branch of the Klebsiella glycerol pathway, whereas in the anaerobic phase there is a rapid initiation of 1,3-propanediol oxidoreductase formation. A fast change from an aerobic to an anaerobic environment led to a redox imbalance, which resulted in the abrupt activation of the anaerobic branch of glycerol utilization, with the occurrence of a high 1,3-propanediol-oxidoreductase activity. A mathematical model with substrate inhibition showed that the adequate glycerol concentration for enzyme production was 14–16 g/l. The combination of the optimal substrate concentration together with the subsequent use of glucose and glycerol resulted in 90.6 ± 11.6 U enzyme activity referred to 1 l of fermentation broth and 10.3 ± 0.9 U/(1 h) productivity.     

Glycerol fermentation of 1,3-propanediol by Clostridium butyricum. Measurement of product inhibition by use of a pH-auxostat

Summary The fermentation of glycerol to 1,3-propanediol, acetate, and butyrate by Clostridium butyricum was studied with respect to growth inhibition by the accumulating products. The clostridia were grown in a pH-auxostat culture at low cell density and product concentration and near maximum growth rate. The products were then added individually to the medium in increasing concentrations and the resulting depression of growth rate was used as a quantitative estimate of product inhibition. Under these conditions growth was totally inhibited at concentrations of 60 g/l for 1,3-propanediol, 27 g/l for acetic acid and 19 g/l for butyric acid at pH 6.5. Appreciable inhibition by glycerol was found only above a concentration of 80 g/l. In a pH-auxostat without added products but with high cell density as well as in batch cultures the product proportions were different. The 1,3-propanediol concentration may approach the value of complete inhibition while the concentrations of acetic and butyric acids remained below these values by at least one order of magnitude. It was therefore concluded that 1,3-propanediol is the first range inhibitor in this fermentation.     

Production of 1,3-propanediol from Glycerol by Recombinant <Emphasis Type="Italic">E. coli</Emphasis> Using Incompatible Plasmids System

1,3-Propanediol (1,3-PD) has numerous applications in polymers, cosmetics, foods, lubricants, and medicines as a bifunctional organic compound. The genes for the production of 1,3-PD in Klebsiella pneumoniae, dhaB, which encodes glycerol dehydratase, and dhaT, which encodes 1,3-PD oxidoreductase, and gdrAB, which encodes glycerol dehydratase reactivating factor, are naturally under the control of different promoters and are transcribed in different directions. These genes were coexpressed in E. coli using two incompatible plasmids (pET28a and pET22b) in the presence of selective pressure. The recombinant E. coli coexpressed the glycerol dehydratase, 1,3-propanediol oxidoreductase and reactivating factor for the glycerol dehydratase at high levels. In a fed-batch fermentation of glycerol and glucose, the recombinant E. coli containing these two incompatible plasmids consumed 14.3 g/l glycerol and produced 8.6 g/l 1,3-propanediol. In the substitution case of yqhD (encoding alcohol dehydrogenase from E. coli) for dhaT, the final 1,3-propanediol concentration of the recombinant E. coli could reach 13.2 g/l.     

3-Hydroxypropionaldehyde guided glycerol feeding strategy in aerobic 1,3-propanediol production by <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis>

3-Hydroxypropionaldehyde (3-HPA) is a toxic intermediary metabolite in the biological route of 1,3-propanediol biosynthesis from glycerol. 3-HPA accumulated in culture medium would arouse an irreversible cessation of the fermentation process. The role of substrate (glycerol) on 3-HPA accumulation in aerobic fermentation was investigated in this paper. 1,3-Propanediol oxidoreductase and glycerol dehydratase, two key enzyme catalyzing reactions of 3-HPA formation and consumption, were sensitive to high concentration of 3-HPA. When the concentration of 3-HPA increased to a higher level in medium (ac 10 mmol/L), the activity of 1,3-propanediol oxidoreductase in cell decreased correspondingly, which led to decrease of the 3-HPA conversion rate, then the 3-HPA concentration increasing was accelerated furthermore. 3-HPA accumulation in culture medium was triggered by this positive feedback mechanism. In the cell exponential growth phase, the reaction catalyzed by 1,3-propanediol oxidoreductase was the rate limiting step in 1,3-propanediol production. The level of 3-HPA in culture medium could be controlled by the substrate (glycerol) concentration, and lower level of glycerol could avoid 3-HPA accumulating to a high, lethal concentration. In fed batch fermentation, under the condition of initial glycerol concentration 30 g/L, and keeping glycerol concentration lower than 7–8 g/L in cell exponential growth phase, 3-HPA accumulation could not be incurred. Based on this result, a glycerol feeding strategy was set up in fed batch fermentation. Under the optimized condition, 50.1 g/L of 1,3-propanediol was produced in 24 h, and 73.1 g/L of final 1,3-propanediol concentration was obtained in 54 h.     

Glycerol fermentation by a new 1,3-propanediol-producing microorganism:Enterobacter agglomerans

 According to their ability to synthesize 1,3-propanediol from glycerol, two species were isolated from the anoxic mud of a distillery waste-water digestor: Clostridium butyricum and Enterobacter agglomerans. The latter, a facultatively anaerobic gram-negative bacterium, is described for the first time as a microorganism producing 1,3-propanediol from glycerol. The products of glycerol conversion by E. agglomerans were identified using nuclear magnetic resonance. A 20-g/l glycerol solution was fermented mainly to 1,3-propanediol (0.51 mol/mol) and acetate (0.18 mol/mol). Ethanol, formate, lactate and succinate were formed as by-products. Gas production was very low; 1,3-propanediol production perfectly balanced the oxido-reduction state of the microorganism. Acetate was the predominant metabolite generating energy for growth. High-glycerol-concentration fermentations (71 g/l and 100 g/l) resulted in an increase of the 1,3-propanediol yield (0.61 mol/mol) at the expense of lactate and ethanol production. Specific rates of glycerol consumption and 1, 3-propanediol and acetate production increased whereas the growth rate decreased. The decrease in ATP yield was linearly correlated with the specific rate of 1,3-propanediol production. Incomplete glycerol consumption (about 40 g/l) was systematically observed when high glycerol concentrations were used. The unbalanced oxido-reduction state, the low carbon recovery and the detection of an unknown compound by HPLC observed in these cases indicate the formation of another metabolite, which is possibly an inhibitory factor. Received: 17 November 1994 / Accepted: 15 December 1994     

Production of 1,3-propanediol by <Emphasis Type="Italic">Clostridium butyricum</Emphasis> growing on biodiesel-derived crude glycerol through a non-sterilized fermentation process

The aim of the present study was to investigate the production of 1,3-propanediol (PDO) under non-sterile fermentation conditions by employing the strain Clostridium butyricum VPI 1718. A series of batch cultures were performed by utilizing biodiesel-derived crude glycerol feedstocks of different origins as the sole carbon source, in various initial concentrations. The strain presented similarities in terms of PDO production when cultivated on crude glycerol of various origins, with final concentrations ranging between 11.1 and 11.5 g/L. Moreover, PDO fermentation was successfully concluded regardless of the initial crude glycerol concentration imposed (from 20 to 80 g/L), accompanied by sufficient PDO production yields (0.52–0.55 g per gram of glycerol consumed). During fed-batch operation under non-sterile culture conditions, 67.9 g/L of PDO were finally produced, with a yield of 0.55 g/g. Additionally, the sustainability of the bioprocess during a continuous operation was tested; indeed, the system was able to run at steady state for 16 days, during which PDO effluent level was 13.9 g/L. Furthermore, possible existence of a microbial community inside the chemostat was evaluated by operating a polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) analysis, and DGGE results revealed the presence of only one band corresponding to that of C. butyricum VPI 1718. Finally, non-sterile continuous cultures were carried out at different dilution rates (D), with inlet glycerol concentration at 80 g/L. Maximum PDO production was achieved at low D values (0.02 h⁻¹) corresponding to 30.1 g/L, while the elaboration of kinetic data from continuous cultures revealed the stability of the bioprocess proposed, with global PDO production yield corresponding to 0.52 g/g.     

Microbial fed-batch production of 1,3-propanediol by Klebsiella pneumoniae under micro-aerobic conditions

The microbial production of 1,3-propanediol (1,3-PD) by Klebsiella pneumoniae under micro-aerobic conditions was investigated in this study. The experimental results of batch fermentation showed that the final concentration and yield of 1,3-PD on glycerol under micro-aerobic conditions approached values achieved under anaerobic conditions. However, less ethanol was produced under microaerobic than anaerobic conditions at the end of fermentation. The batch micro-aerobic fermentation time was markedly shorter than that of anaerobic fermentation. This led to an increment of productivity of 1,3-PD. For instance, the concentration, molar yield, and productivity of 1,3-PD of batch micro-aerobic fermentation by K. pneumoniae DSM 2026 were 17.65 g/l, 56.13%, and 2.94 g l^–1 h^–1, respectively, with a fermentation time of 6 h and an initial glycerol concentration of 40 g/l. Compared with DSM 2026, the microbial growth of K. pneumoniae AS 1.1736 was slow and the concentration of 1,3-PD was low under the same conditions. Furthermore, the microbial growth in fed-batch fermentation by K. pneumoniae DSM 2026 was faster under micro-aerobic than anaerobic conditions. The concentration, molar yield, and productivity of 1,3-PD in fed-batch fermentation under micro-aerobic conditions were 59.50 g/l, 51.75%, and 1.57 g l^–1 h^–1, respectively. The volumetric productivity of 1,3-PD under microaerobic conditions was almost twice that of anaerobic fed-batch fermentation, at 1.57 and 0.80 g l^–1 h^–1, respectively.