Transient marker system for iterative gene targeting of a prototrophic fungus

Auxotrophic microorganisms are often used for genetic engineering, because their biosynthetic deficiency can be complemented by the transforming DNA and allows selection for transformants that have become prototrophic. However, when complementation is obtained by ectopic expression this may lead to unpredictable side effects on the phenotype and, consequently, misinterpretation of experimental data. There are various ways to overcome the problem of auxotrophy, but the most reliable is to restore the function of the defective biosynthetic gene at the native genomic locus. This can be done by either sexual crossing or further genetic engineering. For fungal species lacking a perfect state or situations in which gene targeting is generally cumbersome we have developed a concept that allows transient disruption of pyrG. When the gene is in the disrupted state, multiple rounds of gene targeting can be performed with the strain. Once the desired genome engineering is completed, pyrG function can be rapidly returned to wild type by a simple selection scheme.     

Establishment of a selection marker recycling system for sequential transformation of the plant-pathogenic fungus Colletotrichum orbiculare

Genome sequencing of pathogenic fungi has revealed the presence of various effectors that aid pathogen invasion by the manipulation of plant immunity. Effectors are often individually dispensable because of duplication and functional redundancy as a result of the arms race between host plants and pathogens. To study effectors that have functional redundancy, multiple gene disruption is often required. However, the number of selection markers that can be used for gene targeting is limited. Here, we established a marker recycling system that allows the use of the same selection marker in successive transformations in the model fungal pathogen Colletotrichum orbiculare, a causal agent of anthracnose disease in plants belonging to the Cucurbitaceae. We identified two C. orbiculare homologues of yeast URA3/pyrG, designated as URA3A and URA3B, which can be used as selection markers on medium with no uridine. The gene can then be removed from the genome via homologous recombination when the fungus is grown in the presence of 5-fluoroorotic acid (5-FOA), a chemical that is converted into a toxin by URA3 activity. The ura3a/b double mutants showed auxotrophy for uridine and insensitivity to 5-FOA. Using the ura3a/b mutants, transformation with the URA3B marker and its removal were successfully applied to disrupt the virulence-related gene, PKS1. The pks1 mutants showed a reduction in virulence, demonstrating that the method can be used to study virulence-related genes in C. orbiculare. The establishment of a URA3-based marker recycling system in plant-pathogenic fungi enables the genetic analysis of multiple genes that have redundant functions, including effector genes.     

Further enhanced production of heterologous proteins by double-gene disruption (ΔAosedD ΔAovps10) in a hyper-producing mutant of Aspergillus oryzae

The filamentous fungus Aspergillus oryzae is used as one of the most favored hosts for heterologous protein production due to its ability to secrete large amounts of proteins into the culture medium. We previously generated a hyper-producing mutant strain of A. oryzae, AUT1, which produced 3.2- and 2.6-fold higher levels of bovine chymosin (CHY) and human lysozyme (HLY), respectively, compared with the wild-type strain. However, further enhancement of heterologous protein production by multiple gene disruption is difficult because of the low gene-targeting efficiency in strain AUT1. Here, we disrupted the ligD gene, which is involved in nonhomologous recombination, and the pyrG gene to create uridine/uracil auxotrophy in strain AUT1, to generate a hyper-producing mutant applicable to pyrG marker recycling with highly efficient gene targeting. We generated single and double disruptants of the tripeptidyl peptidase gene AosedD and vacuolar sorting receptor gene Aovps10 in the hyper-producing mutant background, and found that all disruptants showed significant increases in heterologous protein production. Particularly, double disruption of the Aovps10 and AosedD genes increased the production levels of CHY and HLY by 1.6- and 2.1-fold, respectively, compared with the parental strain. Thus, we successfully generated a fungal host for further enhancing the heterologous protein production ability by combining mutational and molecular breeding techniques.     

Development and refinement of a high-efficiency gene-targeting system for Aspergillus flavus

An efficient gene-targeting system based on impairment of the nonhomologous end-joining pathway and the orotidine monophosphate decarboxylase gene (pyrG) in Aspergillus flavus was established. It was achieved by replacing the ku70 gene with the Aspergillus oryzae pyrithiamine resistance (ptr) gene and by inserting the Aspergillus parasiticus cypA gene into the pyrG locus. The utility of this system was demonstrated by disruption of nine candidate genes for conidial pigment biosynthesis. The gene-targeting frequencies ranged from 80 to 100%. Two linked genes on chromosome 4, wA and olgA, were confirmed to be involved in pigment formation. In contrast to the parental strain which produced yellowish-green conidia, the knockout mutants produced white and olive-green conidia, respectively. The system was further refined by restoring the pyrithiamine sensitivity and uracil auxotrophy in the A. flavus transformation recipient with an engineered pyrG marker. The improvement allowed gene manipulation using the reusable pyrG marker as shown by the restoration of laeA-mediated aflatoxin production in an A. flavus laeA-deleted mutant.     

Development of a homologous transformation system for Aspergillus niger based on the pyrG gene

Summary The development of a homologous transformation system for Aspergillus niger is described. The system is based on the use of an orotidine-5-phosphate decarboxylase deficient mutant (pyrG) and a vector, pAB4-1, which contains the functional A. niger pyrG gene as a selection marker. Transformation of the A. niger pyrG mutant with pAB4-1 resulted in the appearance of stable Pyr⁺ transformants at a frequency of 40 transformants per g of DNA. In 90% of these transformants integration had occurred at the resident pyrG locus, resulting either in replacement of the mutant allele by the wild-type allele (60%) or in insertion of one or two copies of the vector (40%). The A. niger pyrG mutant could also be transformed with the vector pDJB2 containing the pyr4 gene of Neurospora crassa, at a frequency of 2 transformants per g of DNA. Integration at the resident pyrG locus was not found with this vector. The vector pAB4-1 is also capable of transforming an Aspergillus nidulans pyrG mutant to Pyr⁺. The pyrG transformation system was used for the introduction of a non-selectable gene into A. niger.     

A single vector containing modified cre recombinase and LOX recombination sequences for inducible tissue-specific amplification of gene expression

The selective alteration of the genome using Cre recombinase to target the rearrangement of genes flanked by LOX recognition sequences has required the use of two separate genetic constructs in trans, one containing cre and the other containing the gene of interest flanked by LOX sites. We have developed a strategy in which both the cre recombinase gene and LOX recombination sites may be cloned within a single vector in cis. This method uses a modified form of Cre (CREM) that contains alterations to the 5′ region including the introduction of a Kozak consensus sequence and insertion of a functional intron. This system allows for the inducible, tissue-specific activation or inactivation of gene expression in a single vector and can be utilized for the 300-fold amplification of gene expression from a weak promoter. This approach can be applied to targeting strategies for generating genetically altered mice and gene therapy.     

W::Neo: a novel dual-selection marker for high efficiency gene targeting in Drosophila

We have recently developed a so-called genomic engineering approach that allows for directed, efficient and versatile modifications of Drosophila genome by combining the homologous recombination (HR)-based gene targeting with site-specific DNA integration. In genomic engineering and several similar approaches, a "founder" knock-out line must be generated first through HR-based gene targeting, which can still be a potentially time and resource intensive process. To significantly improve the efficiency and success rate of HR-based gene targeting in Drosophila, we have generated a new dual-selection marker termed W::Neo, which is a direct fusion between proteins of eye color marker White (W) and neomycin resistance (Neo). In HR-based gene targeting experiments, mutants carrying W::Neo as the selection marker can be enriched as much as fifty times by taking advantage of the antibiotic selection in Drosophila larvae. We have successfully carried out three independent gene targeting experiments using the W::Neo to generate genomic engineering founder knock-out lines in Drosophila.     

Sclerotia formed by citric acid producing strains of Aspergillus niger: Induction and morphological analysis

Some strains of Aspergillus niger have been previously reported to produce sclerotia under certain conditions. Sclerotia are aggregations of hyphae which can act either as survival or as sexual structures in species related to A. niger. In this study, we were able to induce the formation of sclerotia in the progenitor of the industrial citric acid producing strains of A. niger, ATCC 1015, and in pyrG mutants derived from it. Sclerotia can be stably formed by ATCC 1015 on malt extract agar medium supplemented with raisins, showing a spatial differentiation of the fungus dependent on the addition and on the position of the fruits into the medium. On other media, including malt extract agar, pyrG auxotrophs also form abundant sclerotia, while the complementation of this gene reverses this phenotype. Additionally, a macro- and microscopical analysis of the sclerotia is reported. Our results show that the sclerotia formed by A. niger are similar to those formed by other fungi, not only in their morphology but also in their ability to germinate and regenerate the organism.     

Insights into an Unusual Nonribosomal Peptide Synthetase Biosynthesis: IDENTIFICATION AND CHARACTERIZATION OF THE GE81112 BIOSYNTHETIC GENE CLUSTER*

The GE81112 tetrapeptides (1–3) represent a structurally unique class of antibiotics, acting as specific inhibitors of prokaryotic protein synthesis. Here we report the cloning and sequencing of the GE81112 biosynthetic gene cluster from Streptomyces sp. L-49973 and the development of a genetic manipulation system for Streptomyces sp. L-49973. The biosynthetic gene cluster for the tetrapeptide antibiotic GE81112 (getA-N) was identified within a 61.7-kb region comprising 29 open reading frames (open reading frames), 14 of which were assigned to the biosynthetic gene cluster. Sequence analysis revealed the GE81112 cluster to consist of six nonribosomal peptide synthetase (NRPS) genes encoding incomplete di-domain NRPS modules and a single free standing NRPS domain as well as genes encoding other biosynthetic and modifying proteins. The involvement of the cloned gene cluster in GE81112 biosynthesis was confirmed by inactivating the NRPS gene getE resulting in a GE81112 production abolished mutant. In addition, we characterized the NRPS A-domains from the pathway by expression in Escherichia coli and in vitro enzymatic assays. The previously unknown stereochemistry of most chiral centers in GE81112 was established from a combined chemical and biosynthetic approach. Taken together, these findings have allowed us to propose a rational model for GE81112 biosynthesis. The results further open the door to developing new derivatives of these promising antibiotic compounds by genetic engineering.     

Use of the <Emphasis Type="Italic">pyrG</Emphasis> gene as a food-grade selection marker in <Emphasis Type="Italic">Monascus</Emphasis>

Ma-pyrG was cloned from Monascus aurantiacus AS3.4384 using degenerate PCR with primers designed with an algorithm called CODEHOP, and its complete sequence was obtained by a PCR-based strategy for screening a Monascus fosmid library. Ma-pyrG encodes orotidine-5′-phosphate decarboxylase (OMPdecase), a 283-aminoacid protein with 81% sequence identity to that from Aspergillus flavus NRRL 3357. A pyrG mutant strain from M. aurantiacus AS3.4384, named UM28, was isolated by resistance to 5-fluoroorotic acid after UV mutagenesis. Sequence analysis of this mutated gene revealed that it contained a point mutation at nucleotide position +220. Plasmid pGFP-pyrG, bearing the green fluorescent protein gene (GFP) as a model gene and Ma-pyrG as a selection marker, were constructed. pGFP-pyrG were successfully transformed into UM28 by using the PEG method.     

Improved techniques for endogenous epitope tagging and gene deletion in Toxoplasma gondii

Toxoplasma gondii is an excellent model organism for studies on the biology of the Apicomplexa due to its ease of in vitro cultivation and genetic manipulation. Large-scale reverse genetic studies in T. gondii have, however, been difficult due to the low frequency of homologous recombination. Efforts to ensure homologous recombination have necessitated engineering long flanking regions in the targeting construct. This requirement makes it difficult to engineer chromosomally targeted epitope tags or gene knock out constructs only by restriction enzyme mediated cloning steps. To address this issue we employed multisite Gateway® recombination techniques to generate chromosomal gene manipulation targeting constructs. Incorporation of 1.5 to 2.0 kb flanking homologous sequences in PCR generated targeting constructs resulted in 90% homologous recombination events in wild type T. gondii (RH strain) as determined by epitope tagging and target gene deletion experiments. Furthermore, we report that split marker constructs were equally efficient for targeted gene disruptions using the T. gondii UPRT gene locus as a test case. The methods described in this paper represent an improved strategy for efficient epitope tagging and gene disruptions in T. gondii.     

Improvement of ClosTron for successive gene disruption in Clostridium cellulolyticum using a pyrF-based screening system

Clostridium includes a number of species, such as thermophilic Clostridium thermocellum and mesophilic Clostridium cellulolyticum, producing biofuels and chemicals from lignocellulose, while genetic engineering is necessary to improve wild-type strains to fulfill the requirement of industrialization. ClosTron system is widely used in the gene targeting of Clostridium because of its high efficiency and operability. However, the targetron plasmid present in cell hinders the successive gene disruption. To solve this problem, a pyrF-based screening system was developed and implemented in C. cellulolyticum strain H10 in this study for efficient targetron plasmid curing. The screening system was composed of a pyrF-deleted cell chassis (H10ΔpyrF) constructed via homologous recombination and a PyrF expression cassette located in a targetron plasmid containing an erythromycin resistance gene. With the screening system, the gene targeting could be achieved following a two-step procedure, including the first step of gene disruption through targetron transformation and erythromycin selection and the second step of plasmid curing by screening with 5-fluoroorotic acid. To test the developed screening system, successive inactivation of the major cellulosomal exocellulase Cel48F and the scaffoldin protein CipC was achieved in C. cellulolyticum, and the efficient plasmid curing was confirmed. With the assistance of the pyrF-based screening system, the targetron plasmid-cured colonies can be rapidly selected by one-plate screening instead of traditional days' unguaranteed screening, and the successive gene disruption becomes accomplishable with ClosTron system with improved stability and efficiency, which may promote the metabolic engineering of Clostridium species aiming at enhanced production of biofuels and chemicals.     

<Emphasis Type="Italic">Agrobacterium tumefaciens</Emphasis>-mediated transformation: an efficient tool for targeted gene disruption in <Emphasis Type="Italic">Talaromyces marneffei</Emphasis>

Talaromyces marneffei causes life-threatening infections in immunocompromised hosts. An efficient tool for genetic manipulation of T. marneffei will allow for increased understanding of this thermally dimorphic fungus. Agrobacterium tumefaciens-mediated transformation (ATMT) was optimized for targeted gene disruption in T. marneffei using the plasmid pDHt/acuD::pyrG. Molecular analyses of transformants were performed by PCR, Southern blot and semi-quantitative RT-PCR. A. tumefaciens strain EHA105 was more efficient at transformation than strain AGL-1 in ATMT via solid co-cultivation. An A. tumefaciens:T. marneffei ratio of 1000:1 in an ATMT liquid co-cultivation led to a relatively high transformation efficiency of 90 transformants per 10⁶ yeast cells. Using ATMT-mediated knockout mutagenesis, we successfully deleted the acuD gene in T. marneffei. PCR and Southern blot analysis confirmed that acuD was disrupted and that the foreign pyrG gene was integrated into T. marneffei. Semi-quantitative RT-PCR analysis further confirmed that pyrG was expressed normally. These results suggest that ATMT can be a potential platform for targeted gene disruption in T. marneffei and that liquid co-cultivation may provide new opportunities to develop clinical treatments.     

Molecular characterization of the niaD and pyrG genes from Penicillium camemberti, and their use as transformation markers

Genetic manipulation of the filamentous fungus Penicillium camemberti has been limited by a lack of suitable genetics tools for this fungus. In particular, there is no available homologous transformation system. In this study, the nitrate reductase (niaD) and orotidine-5′-monophosphate decarboxylase (pyrG) genes from Penicillium camemberti were characterized, and their suitability as metabolic molecular markers for transformation was evaluated. The genes were amplified using PCR-related techniques, and sequenced. The niaD gene is flanked by the nitrite reductase (niiA) gene in a divergent arrangement, being part of the putative nitrate assimilation cluster in P. camemberti. pyrG presents several polymorphisms compared with a previously sequenced pyrG gene from another P. camemberti strain, but almost all are silent mutations. Southern blot assays indicate that one copy of each gene is present in P. camemberti. Northern blot assays showed that the pyrG gene is expressed in minimal and rich media, and the niaD gene is expressed in nitrate, but not in reduced nitrogen sources. The functionality of the two genes as transformation markers was established by transforming A. nidulans pyrG- and niaD-deficient strains. Higher transformation efficiencies were obtained with a pyrG-containing plasmid. This is the first study yielding a molecular and functional characterization of P. camemberti genes that would be useful as molecular markers for transformation, opening the way for the future development of a non-antibiotic genetic transformation system for this fungus.     

Metabolic engineering of Pseudomonas putida for production of docosahexaenoic acid based on a myxobacterial PUFA synthase

Long-chain polyunsaturated fatty acids (LC-PUFAs) can be produced de novo via polyketide synthase-like enzymes known as PUFA synthases, which are encoded by pfa biosynthetic gene clusters originally discovered from marine microorganisms. Recently similar gene clusters were detected and characterized in terrestrial myxobacteria revealing several striking differences. As the identified myxobacterial producers are difficult to handle genetically and grow very slowly we aimed to establish heterologous expression platforms for myxobacterial PUFA synthases. Here we report the heterologous expression of the pfa gene cluster from Aetherobacter fasciculatus (SBSr002) in the phylogenetically distant model host bacteria Escherichia coli and Pseudomonas putida. The latter host turned out to be the more promising PUFA producer revealing higher production rates of n-6 docosapentaenoic acid (DPA) and docosahexaenoic acid (DHA). After several rounds of genetic engineering of expression plasmids combined with metabolic engineering of P. putida, DHA production yields were eventually increased more than threefold. Additionally, we applied synthetic biology approaches to redesign and construct artificial versions of the A. fasciculatus pfa gene cluster, which to the best of our knowledge represents the first example of a polyketide-like biosynthetic gene cluster modulated and synthesized for P. putida. Combination with the engineering efforts described above led to a further increase in LC-PUFA production yields. The established production platform based on synthetic DNA now sets the stage for flexible engineering of the complex PUFA synthase.     

An Enhanced Gene Targeting Toolkit for Drosophila: Golic+

Ends-out gene targeting allows seamless replacement of endogenous genes with engineered DNA fragments by homologous recombination, thus creating designer “genes” in the endogenous locus. Conventional gene targeting in Drosophila involves targeting with the preintegrated donor DNA in the larval primordial germ cells. Here we report gene targeting during oogenesis with lethality inhibitor and CRISPR/Cas (Golic+), which improves on all major steps in such transgene-based gene targeting systems. First, donor DNA is integrated into precharacterized attP sites for efficient flip-out. Second, FLP, I-SceI, and Cas9 are specifically expressed in cystoblasts, which arise continuously from female germline stem cells, thereby providing a continual source of independent targeting events in each offspring. Third, a repressor-based lethality selection is implemented to facilitate screening for correct targeting events. Altogether, Golic+ realizes high-efficiency ends-out gene targeting in ovarian cystoblasts, which can be readily scaled up to achieve high-throughput genome editing.     

Gene inactivation study of gntE reveals its role in the first step of pseudotrisaccharide modifications in gentamicin biosynthesis

A gene inactivation study was performed on gntE, a member of the gentamicin biosynthetic gene cluster in Micromonospora echinospora. Computer-aided homology analysis predicts a methyltransferase-related cobalamin-binding domain and a radical S-adenosylmethionine domain in GntE. It is also found that there is no gntE homolog within other aminoglycoside biosynthetic gene clusters. Inactivation of gntE was achieved in both M. echinospora ATCC 15835 and a gentamicin high-producer GMC106. High-performance liquid chromatographic analysis, coupled with mass spectrometry, revealed that gntE mutants accumulated gentamicin A2 and its derivative with a methyl group installed on the glucoamine moiety. This result substantiated that GntE participates in the first step of pseudotrisaccharide modifications in gentamicin biosynthesis, though the catalytic nature of this unusual oxidoreductase/methyltransferase candidate is not resolved. The present gene inactivation study also demonstrates that targeted genetic engineering can be applied to produce specific gentamicin structures and potentially new gentamicin derivatives in M. echinospora.     

Insights into the Biosynthesis of the Benzoquinone Ansamycins Geldanamycin and Herbimycin, Obtained by Gene Sequencing and Disruption

Geldanamycin and the closely related herbimycins A, B, and C were the first benzoquinone ansamycins to be extensively studied for their antitumor properties as small-molecule inhibitors of the Hsp90 protein chaperone complex. These compounds are produced by two different Streptomyces hygroscopicus strains and have the same modular polyketide synthase (PKS)-derived carbon skeleton but different substitution patterns at C-11, C-15, and C-17. To set the stage for structural modification by genetic engineering, we previously identified the gene cluster responsible for geldanamycin biosynthesis. We have now cloned and sequenced a 115-kb segment of the herbimycin biosynthetic gene cluster from S. hygroscopicus AM 3672, including the genes for the PKS and most of the post-PKS tailoring enzymes. The similarities and differences between the gene clusters and biosynthetic pathways for these closely related ansamycins are interpreted with support from the results of gene inactivation experiments. In addition, the organization and functions of genes involved in the biosynthesis of the 3-amino-5-hydroxybenzoic acid (AHBA) starter unit and the post-PKS modifications of progeldanamycin were assessed by inactivating the subclusters of AHBA biosynthetic genes and two oxygenase genes (gdmM and gdmL) that were proposed to be involved in formation of the geldanamycin benzoquinoid system. A resulting novel geldanamycin analog, KOS-1806, was isolated and characterized.