Spruce budworm antifreeze protein: changes in structure and dynamics at low temperature

Antifreeze proteins (AFPs) prevent the growth of ice, and are used by some organisms that live in sub-zero environments for protection against freezing. All AFPs are thought to function by an adsorption inhibition process. In order to elucidate the ice-binding mechanism, the structures of several AFPs have been determined, and have been shown to consist of different folds. Recently, the first structures of the highly active insect AFPs have been characterized. These proteins have a beta-helix structure, which adds yet another fold to the AFP family. The 90-residue spruce budworm (Choristoneura fumiferana) AFP consists of a beta-helix with 15 residues per coil. The structure contains two ranks of aligned threonine residues (known as the TXT motif), which were shown by mutagenesis experiments to be located in the ice-binding face. In our previous NMR study of this AFP at 30 degrees C, we found that the TXT face was not optimally defined because of the broadening of NMR resonances potentially due to weak oligomerization. We present here a structure of spruce budworm AFP determined at 5 degrees C, where this broadening is reduced. In addition, the 1H-15N NMR dynamics of the protein were examined at 30 degrees C and 5 degrees C. The results show that the spruce budworm AFP is more structured at 5 degrees C, and support the general observation that AFPs become more rigid as the temperature is lowered.     

The solution structure of the pH-induced monomer of dynein light-chain LC8 from Drosophila

The structure of Drosophila LC8 pH-induced monomer has been determined by NMR spectroscopy using the program AutoStructure. The structure at pH 3 and 30 degrees C is similar to the individual subunits of mammalian LC8 dimer with the exception that a beta strand, which crosses between monomers to form an intersubunit beta-sheet in the dimer, is a flexible loop with turnlike conformations in the monomer. Increased flexibility in the interface region relative to the rest of the protein is confirmed by dynamic measurements based on (15)N relaxation. Comparison of the monomer and dimer structures indicates that LC8 is not a domain swapped dimer.     

Structural basis of the temperature transition of Pf1 bacteriophage

The filamentous bacteriophage Pf1 undergoes a reversible temperature-dependent transition that is also influenced by salt concentrations. This structural responsiveness may be a manifestation of the important biological property of flexibility, which is necessary for long, thin filamentous assemblies as a protection against shear forces. To investigate structural changes in the major coat protein, one- and two-dimensional solid-state NMR spectra of concentrated solutions of Pf1 bacteriophage were acquired, and the structure of the coat protein determined at 0 degrees C was compared with the structure previously determined at 30 degrees C. Despite dramatic differences in the NMR spectra, the overall change in the coat protein structure is small. Changes in the orientation of the C-terminal helical segment and the conformation of the first five residues at the N-terminus are apparent. These results are consistent with prior studies by X-ray fiber diffraction and other biophysical methods.     

Structure of the coat protein in Pf1 bacteriophage determined by solid-state NMR spectroscopy

The atomic resolution structure of Pf1 coat protein determined by solid-state NMR spectroscopy of magnetically aligned filamentous bacteriophage particles in solution is compared to the structures previously determined by X-ray fiber and neutron diffraction, the structure of its membrane-bound form, and the structure of fd coat protein. These structural comparisons provide insights into several biological properties, differences between class I and class II filamentous bacteriophages, and the assembly process. The six N-terminal amino acid residues adopt an unusual "double hook" conformation on the outside of the bacteriophage particle. The solid-state NMR results indicate that at 30 degrees C, some of the coat protein subunits assume a single, fully structured conformation, and some have a few mobile residues that provide a break between two helical segments, in agreement with structural models from X-ray fiber and neutron diffraction, respectively. The atomic resolution structure determined by solid-state NMR for residues 7-14 and 18-46, which excludes the N-terminal double hook and the break between the helical segments, but encompasses more than 80% of the backbone including the distinct kink at residue 29, agrees with that determined by X-ray fiber diffraction with an RMSD value of 2.0 A. The symmetry and distance constraints determined by X-ray fiber and neutron diffraction enable the construction of an accurate model of the bacteriophage particle from the coordinates of the coat protein monomers.     

The solution conformation of a carbocyclic analog of the Dickerson-Drew dodecamer: comparison with its own X-ray structure and that of the NMR structure of the native counterpart

The NMR conformation of a carbocyclic analog of the Dickerson-Drew dodecamer [d(CGC-GAAT*T*CGCG)]2 containing 6'-alpha-Me carbocyclic thymidines (T*) has been determined and compared with that of its X-ray structure. The solution structure of the 6'-alpha-Me carbocyclic thymidine modified duplex has also been compared with the solution structure of the corresponding unmodified Dickerson-Drew duplex solved by us under the same experimental conditions. The NMR structures have been based on 24 experimental distance and torsion constraints per residue for [d(CGCGAAT*T*CGCG)]2 (1) and on 21 constraints per residue for the natural counterpart. In general, both final NMR structures are more close to the B-type DNA. The cyclopentane moieties of the carbocyclic thymidine residues adopt C1'-exo B-DNA type puckers (the phase angles P = 136-139 degrees and the puckering amplitudes psi = 36-37 degrees) that are close to their previously published crystal C1'-exo or C2'-endo puckers. The main differences between the two NMR structures are for beta(T*8) and epsilon, xi(T*7) backbone torsions (27-50 degrees ), for basepair twist for the 7-8 and 8-9 basepair steps (5-6 degrees), tilt for the 8-9 step (7 degrees), roll for the 7-8 step (7 degrees), shift for the 7-8 step (0.9A) and slide for the 9-10 step (0.6A). The relatively small deviations of helical structure parameters lead to structural isomorphism of these duplexes in aqueous solutions (atomic RMSD = 1.0A). The difference of the minor groove widths (less than 0.7A) in the core part of the modified duplex in comparison with the native one is much smaller than the difference between the X-ray structures of these duplexes. A detailed comparison of NMR and X-ray structure parameters showed significant monotonic differences (0.9-2.5A) for all basepair slides in both duplexes. Deviations between NMR and X-ray structure parameters for the modified duplex were also found for basepair tilt of the 4-5 step (13 degrees), rolls for the 8-9 and 10-11 steps (16 and 19 degrees), twist of the 3-4 step (8 degrees) and shift of the 9-10 step (0.9A).     

High resolution solution structure of apo calcyclin and structural variations in the S100 family of calcium-binding proteins

The three-dimensional solution structure of apo rabbit lung calcyclin has been refined to high resolution through the use of heteronuclear NMR spectroscopy and 13C,15N- enriched protein. Upon completing the assignment of virtually all of the 15N, 13C and 1H NMR resonances, the solution structure was determined from a combination of 2814 NOE- derived distance constraints, and 272 torsion angle constraints derived from scalar couplings. A large number of critical inter- subunit NOEs (386) were identified from 13C- select,13C-filtered NOESY experiments, providing a highly accurate dimer interface. The combination of distance geometry and restrained molecular dynamics calculations yielded structures with excellent agreement with the experimental data and high precision (rmsd from the mean for the backbone atoms in the eight helices: 0.33 Å). Calcyclin exhibits a symmetric dimeric fold of two identical 90 amino acid subunits, characteristic of the S100 subfamily of EF-hand Ca2+-binding proteins. The structure reveals a readily identified pair of putative sites for binding of Zn2+. In order to accurately determine the structural features that differentiate the various S100 proteins, distance difference matrices and contact maps were calculated for the NMR structural ensembles of apo calcyclin and rat and bovine S100B. These data show that the most significant variations among the structures are in the positioning of helix III and in loops, the regions with least sequence similarity. Inter-helical angles and distance differences for the proteins show that the positioning of helix III of calcyclin is most similar to that of bovine S100B, but that the helix interfaces are more closely packed in calcyclin than in either S100B structure. Surprisingly large differences were found in the positioning of helix III in the two S100B structures, despite there being only four non-identical residues, suggesting that one or both of the S100B structures requires further refinement.     

De novo protein structure determination using sparse NMR data

We describe a method for generating moderate to high-resolution protein structures using limited NMR data combined with the ab initio protein structure prediction method Rosetta. Peptide fragments are selected from proteins of known structure based on sequence similarity and consistency with chemical shift and NOE data. Models are built from these fragments by minimizing an energy function that favors hydrophobic burial, strand pairing, and satisfaction of NOE constraints. Models generated using this procedure with 1 NOE constraint per residue are in some cases closer to the corresponding X-ray structures than the published NMR solution structures. The method requires only the sparse constraints available during initial stages of NMR structure determination, and thus holds promise for increasing the speed with which protein solution structures can be determined.     

Effect of temperature on the structure of trout troponin C

Adaptation for life at different temperatures can cause changes in many aspects of an organism. One example is the expression of different protein isoforms in species adapted to different temperatures. The calcium regulatory protein cardiac troponin C (cTnC), from rainbow trout (Oncorhynchus mykiss), is a good model for studying temperature effects, both because of its low physiological temperature and because mammalian cTnC, extensively studied at higher temperatures, can be used for comparison. We determined the structure and studied the backbone dynamics of the regulatory domain of trout cardiac troponin C (ScNTnC) with one Ca(2+) bound at 7 and 30 degrees C, using nuclear magnetic resonance spectroscopy (NMR). The overall fold of the regulatory domain of trout cTnC at both temperatures is similar to the regulatory domain of mammalian (human, bovine, and porcine isoform) cTnC bound to one Ca(2+). By comparing the trout structures at the two temperatures, we identify differences between the positions of the helices flanking the calcium binding loops, and the overall structure at 7 degrees C is more compact than that at 30 degrees C. The structure at 7 degrees C is more similar to the mammalian cTnC, which was determined at 30 degrees C, indicating that they have the same conformation at their respective physiological temperatures. The dynamic properties of the regulatory domain of trout cTnC are similar at the two temperatures that were used in these studies.     

Modeling the structure of Pyrococcus furiosus rubredoxin by homology to other X-ray structures.

The three-dimensional structure of rubredoxin from the hyperthermophilic archaebacterium, Pyrococcus furiosus, has been modeled from the X-ray crystal structures of three homologous proteins from Clostridium pasteurianum, Desulfovibrio gigas, and Desulfovibrio vulgaris. All three homology models are similar. When comparing the positions of all heavy atoms and essential hydrogen atoms to the recently solved crystal structure (Day, M. W., et al., 1992, Protein Sci. 1, 1494-1507) of the same protein, the homology model differ from the X-ray structure by 2.09 A root mean square (RMS). The X-ray and the zinc-substituted NMR structures (Blake, P. R., et al., 1992b, Protein Sci. 1, 1508-1521) show a similar level of difference (2.05 A RMS). On average, the homology models are closer to the X-ray structure than to the NMR structures (2.09 vs. 2.42 A RMS).     

1H, 13C, and 15N resonance assignments of Fusarium solani pisi cutinase and preliminary features of the structure in solution.

Essentially complete (96%) sequence-specific assignments were made for the backbone and side-chain 1H, 13C, and 15N resonances of Fusarium solani pisi cutinase, produced as a 214-residue heterologous protein in Escherichia coli, using heteronuclear NMR techniques. Three structural features were noticed during the assignment. (1) The secondary structure in solution corresponds mostly with the structure from X-ray diffraction, suggesting that both structures are globally similar. (2) The HN of Ala32 has a strongly upfield-shifted resonance at 3.97 ppm, indicative of an amide-aromatic hydrogen bond to the indole ring of Trp69 that stabilizes the N-terminal side of the parallel beta-sheet. (3) The NMR data suggest that the residues constituting the oxyanion hole are quite mobile in the free enzyme in solution, in contrast to the existence of a preformed oxyanion hole as observed in the crystal structure. Apparently, cutinase forms its oxyanion hole upon binding of the substrate like true lipases.     

Solution structure and dynamics of bovine beta-lactoglobulin A

Using heteronuclear NMR spectroscopy, we studied the solution structure and dynamics of bovine beta-lactoglobulin A at pH 2.0 and 45 degrees C, where the protein exists as a monomeric native state. The monomeric NMR structure, comprising an eight-stranded continuous antiparallel beta-barrel and one major alpha-helix, is similar to the X-ray dimeric structure obtained at pH 6.2, including betaI-strand that forms the dimer interface and loop EF that serves as a lid of the interior hydrophobic hole. [1H]-15N NOE revealed that betaF, betaG, and betaH strands buried under the major alpha-helix are rigid on a pico- to nanosecond time scale and also emphasized rapid fluctuations of loops and the N- and C-terminal regions.     

Evaluating protein structures determined by structural genomics consortia

Structural genomics projects are providing large quantities of new 3D structural data for proteins. To monitor the quality of these data, we have developed the protein structure validation software suite (PSVS), for assessment of protein structures generated by NMR or X-ray crystallographic methods. PSVS is broadly applicable for structure quality assessment in structural biology projects. The software integrates under a single interface analyses from several widely-used structure quality evaluation tools, including PROCHECK (Laskowski et al., J Appl Crystallog 1993;26:283-291), MolProbity (Lovell et al., Proteins 2003;50:437-450), Verify3D (Luthy et al., Nature 1992;356:83-85), ProsaII (Sippl, Proteins 1993;17: 355-362), the PDB validation software, and various structure-validation tools developed in our own laboratory. PSVS provides standard constraint analyses, statistics on goodness-of-fit between structures and experimental data, and knowledge-based structure quality scores in standardized format suitable for database integration. The analysis provides both global and site-specific measures of protein structure quality. Global quality measures are reported as Z scores, based on calibration with a set of high-resolution X-ray crystal structures. PSVS is particularly useful in assessing protein structures determined by NMR methods, but is also valuable for assessing X-ray crystal structures or homology models. Using these tools, we assessed protein structures generated by the Northeast Structural Genomics Consortium and other international structural genomics projects, over a 5-year period. Protein structures produced from structural genomics projects exhibit quality score distributions similar to those of structures produced in traditional structural biology projects during the same time period. However, while some NMR structures have structure quality scores similar to those seen in higher-resolution X-ray crystal structures, the majority of NMR structures have lower scores. Potential reasons for this "structure quality score gap" between NMR and X-ray crystal structures are discussed.     

Structure, conformational stability, and enzymatic properties of acylphosphatase from the hyperthermophile Sulfolobus solfataricus

The structure of AcP from the hyperthermophilic archaeon Sulfolobus solfataricus has been determined by (1)H-NMR spectroscopy and X-ray crystallography. Solution and crystal structures (1.27 A resolution, R-factor 13.7%) were obtained on the full-length protein and on an N-truncated form lacking the first 12 residues, respectively. The overall Sso AcP fold, starting at residue 13, displays the same betaalphabetabetaalphabeta topology previously described for other members of the AcP family from mesophilic sources. The unstructured N-terminal tail may be crucial for the unusual aggregation mechanism of Sso AcP previously reported. Sso AcP catalytic activity is reduced at room temperature but rises at its working temperature to values comparable to those displayed by its mesophilic counterparts at 25-37 degrees C. Such a reduced activity can result from protein rigidity and from the active site stiffening due the presence of a salt bridge between the C-terminal carboxylate and the active site arginine. Sso AcP is characterized by a melting temperature, Tm, of 100.8 degrees C and an unfolding free energy, DeltaG(U-F)H2O, at 28 degrees C and 81 degrees C of 48.7 and 20.6 kJ mol(-1), respectively. The kinetic and structural data indicate that mesophilic and hyperthermophilic AcP's display similar enzymatic activities and conformational stabilities at their working conditions. Structural analysis of the factor responsible for Sso AcP thermostability with respect to mesophilic AcP's revealed the importance of a ion pair network stabilizing particularly the beta-sheet and the loop connecting the fourth and fifth strands, together with increased density packing, loop shortening and a higher alpha-helical propensity.     

The solution structure of a [3Fe-4S] ferredoxin: oxidised ferredoxin II from Desulfovibrio gigas

The use of standard 2D NMR experiments in combination with 1D NOE experiments allowed the assignment of 51 of the 58 spin systems of oxidised [3Fe-4S] ferredoxin isolated from Desulfovibrio gigas. The NMR solution structure was determined using data from 1D NOE and 2D NOESY spectra, as distance constraints, and information from the X-ray structure for the spin systems not detected by NMR in torsion angle dynamics calculations to produce a family of 15 low target function structures. The quality of the NMR family, as judged by the backbone r.m.s.d. values, was good (0.80?Å), with the majority of φ/ψ angles falling within the allowed region of the Ramachandran plot. A comparison with the X-ray structure indicated that the overall global fold is very similar in solution and in the solid state. The determination of the solution structure of ferredoxin II (FdII) in the oxidised state (FdII_ox) opens the way for the determination of the solution structure of the redox intermediate state of FdII (FdII_int), for which no X-ray structure is available.     

Relaxation data in NMR structure determination: model calculations for the lysozyme-Gd3+ complex

The effect of including paramagnetic relaxation data as additional restraints in the determination of protein tertiary structures from NMR data has been explored by a systematic series of model calculations. The system used for testing the method was the 2.0 A resolution tetragonal crystal structure of hen egg white lysozyme (129 amino acid residues) and structures were generated using a version of the hybrid "distance geometry-dynamic simulated annealing" procedure. A limited set of 769 NOEs was used as restraints in all the calculations; the strengths of these were categorized into three classes on the basis of distances observed in the crystal structure. The values of 50 phi angles were also restrained on the basis of amide-alpha coupling constants calculated from the X-ray structure. Five sets of 12 structures were determined using differing sets of paramagnetic relaxation data as restraints additional to those involving the NOE and coupling constant data. The paramagnetic relaxation data were modeled on the basis of the distances of defined protons from the crystallographic binding site of Gd3+ in lysozyme. Analysis of the results showed that the relaxation data significantly improved the correspondence between the set of generated structures and the crystal structure, and that the more well defined the relaxation data, the more significant the improvement in the quality of the structures. The results suggest that the inclusion of paramagnetic relaxation restraints could be of significant value for the experimental determination of protein structures from NMR data.     

Solution-state structure by NMR of zinc-substituted rubredoxin from the marine hyperthermophilic archaebacterium Pyrococcus furiosus.

The three-dimensional solution-state structure is reported for the zinc-substituted form of rubredoxin (Rd) from the marine hyperthermophilic archaebacterium Pyrococcus furiosus, an organism that grows optimally at 100 degrees C. Structures were generated with DSPACE by a hybrid distance geometry (DG)-based simulated annealing (SA) approach that employed 403 nuclear Overhauser effect (NOE)-derived interproton distance restraints, including 67 interresidue, 124 sequential (i-j = 1), 75 medium-range (i-j = 2-5), and 137 long-range (i-j > 5) restraints. All lower interproton distance bounds were set at the sum of the van Der Waals radii (1.8 A), and upper bounds of 2.7 A, 3.3 A, and 5.0 A were employed to represent qualitatively observed strong, medium, and weak NOE cross peak intensities, respectively. Twenty-three backbone-backbone, six backbone-sulfur (Cys), two backbone-side chain, and two side chain-side chain hydrogen bond restraints were include for structure refinement, yielding a total of 436 nonbonded restraints, which averages to > 16 restraints per residue. A total of 10 structures generated from random atom positions and 30 structures generated by molecular replacement using the backbone coordinates of Clostridium pasteurianum Rd converged to a common conformation, with the average penalty (= sum of the square of the distance bounds violations; +/- standard deviation) of 0.024 +/- 0.003 A2 and a maximum total penalty of 0.035 A2. Superposition of the backbone atoms (C, C alpha, N) of residues A1-L51 for all 40 structures afforded an average pairwise root mean square (rms) deviation value (+/- SD) of 0.42 +/- 0.07 A. Superposition of all heavy atoms for residues A1-L51, including those of structurally undefined external side chains, afforded an average pairwise rms deviation of 0.72 +/- 0.08 A. Qualitative comparison of back-calculated and experimental two-dimensional NOESY spectra indicate that the DG/SA structures are consistent with the experimental spectra. The global folding of P. furiosus Zn(Rd) is remarkably similar to the folding observed by X-ray crystallography for native Rd from the mesophilic organism C. pasteurianum, with the average rms deviation value for backbone atoms of residues A1-L51 of P. furiosus Zn(Rd) superposed with respect to residues K2-V52 of C. pasteurianum Rd of 0.77 +/- 0.06 A. The conformations of aromatic residues that compose the hydrophobic cores of the two proteins are also similar. However, P. furiosus Rd contains several unique structural elements, including at least four additional hydrogen bonds and three potential electrostatic interactions.(ABSTRACT TRUNCATED AT 400 WORDS)     

X-ray crystal structures of the oxidized and reduced forms of the rubredoxin from the marine hyperthermophilic archaebacterium Pyrococcus furiosus.

The structures of the oxidized and reduced forms of the rubredoxin from the archaebacterium, Pyrococcus furiosus, an organism that grows optimally at 100 degrees C, have been determined by X-ray crystallography to a resolution of 1.8 A. Crystals of this rubredoxin grow in space group P2(1)2(1)2(1) with room temperature cell dimensions a = 34.6 A, b = 35.5 A, and c = 44.4 A. Initial phases were determined by the method of molecular replacement using the oxidized form of the rubredoxin from the mesophilic eubacterium, Clostridium pasteurianum, as a starting model. The oxidized and reduced models of P. furiosus rubredoxin each contain 414 nonhydrogen protein atoms comprising 53 residues. The model of the oxidized form contains 61 solvent H2O oxygen atoms and has been refined with X-PLOR and TNT to a final R = 0.178 with root mean square (rms) deviations from ideality in bond distances and bond angles of 0.014 A and 2.06 degrees, respectively. The model of the reduced form contains 37 solvent H2O oxygen atoms and has been refined to R = 0.193 with rms deviations from ideality in bond lengths of 0.012 A and in bond angles of 1.95 degrees. The overall structure of P. furiosus rubredoxin is similar to the structures of mesophilic rubredoxins, with the exception of a more extensive hydrogen-bonding network in the beta-sheet region and multiple electrostatic interactions (salt bridge, hydrogen bonds) of the Glu 14 side chain with groups on three other residues (the amino-terminal nitrogen of Ala 1; the indole nitrogen of Trp 3; and the amide nitrogen group of Phe 29). The influence of these and other features upon the thermostability of the P. furiosus protein is discussed.     

The Three-Dimensional Solution Structure of the Src Homology Domain-2 of the Growth Factor Receptor-Bound Protein-2

A set of high-resolution three-dimensional solution structures of the Src homology region-2 (SH2) domain of the growth factor receptor-bound protein-2 was determined using heteronuclear NMR spectroscopy. The NMR data used in this study were collected on a stable monomeric protein solution that was free of protein aggregates and proteolysis. The solution structure was determined based upon a total of 1439 constraints, which included 1326 nuclear Overhauser effect distance constraints, 70 hydrogen bond constraints, and 43 dihedral angle constraints. Distance geometry-simulated annealing calculations followed by energy minimization yielded a family of 18 structures that converged to a root-mean-square deviation of 1.09 Å for all backbone atoms and 0.40 Å for the backbone atoms of the central -sheet. The core structure of the SH2 domain contains an antiparallel -sheet flanked by two parallel -helices displaying an overall architecture that is similar to other known SH2 domain structures. This family of NMR structures is compared to the X-ray structure and to another family of NMR solution structures determined under different solution conditions.