Monitoring the process of HypF fibrillization and liposome permeabilization by protofibrils

Much information has appeared in the last few years on the low resolution structure of amyloid fibrils and on their non-fibrillar precursors formed by a number of proteins and peptides associated with amyloid diseases. The fine structure and the dynamics of the process leading misfolded molecules to aggregate into amyloid assemblies are far from being fully understood. Evidence has been provided in the last five years that protein aggregation and aggregate toxicity are rather generic processes, possibly affecting all polypeptide chains under suitable experimental conditions. This evidence extends the number of model proteins one can investigate to assess the molecular bases and general features of protein aggregation and aggregate toxicity. We have used tapping mode atomic force microscopy to investigate the morphological features of the pre-fibrillar aggregates and of the mature fibrils produced by the aggregation of the hydrogenase maturation factor HypF N-terminal domain (HypF-N), a protein not associated to any amyloid disease. We have also studied the aggregate-induced permeabilization of liposomes by fluorescence techniques. Our results show that HypF-N aggregation follows a hierarchical path whereby initial globules assemble into crescents; these generate large rings, which evolve into ribbons, further organizing into differently supercoiled fibrils. The early pre-fibrillar aggregates were shown to be able to permeabilize synthetic phospholipid membranes, thus showing that this disease-unrelated protein displays the same amyloidogenic behaviour found for the aggregates of most pathological proteins and peptides. These data complement previously reported findings, and support the idea that protein aggregation, aggregate structure and toxicity are generic properties of polypeptide chains.     

Protein particulates: another generic form of protein aggregation?

Protein aggregation is a problem with a multitude of consequences, ranging from affecting protein expression to its implication in many diseases. Of recent interest is the specific form of aggregation leading to the formation of amyloid fibrils, structures associated with diseases such as Alzheimer's disease. The ability to form amyloid fibrils is now regarded as a property generic to all polypeptide chains. Here we show that around the isoelectric point a different generic form of aggregation can also occur by studying seven widely different, nonrelated proteins that are also all known to form amyloid fibrils. Under these conditions gels consisting of relatively monodisperse spherical particulates are formed. Although these gels have been described before for beta-lactoglobulin, our results suggest that the formation of particulates in the regime where charge on the molecules is minimal is a common property of all proteins. Because the proteins used here also form amyloid fibrils, we further propose that protein misfolding into clearly defined aggregates is a generic process whose outcome depends solely on the general properties of the state the protein is in when aggregation occurs, rather than the specific amino acid sequence. Thus under conditions of high net charge, amyloid fibrils form, whereas under conditions of low net charge, particulates form. This observation furthermore suggests that the rules of soft matter physics apply to these systems.     

The mechanism of amyloid spherulite formation by bovine insulin

The formation of amyloid-containing spherulite-like structures has been observed in some instances of amyloid diseases, as well as in amyloid fibril-containing solutions in vitro. In this article we describe the structure and kinetics of bovine insulin amyloid fibril spherulites formed in the presence and absence of different salts and at different salt concentrations. The general spherulite structure consists of radially oriented amyloid fibrils, as shown by optical microscopy and environmental scanning electron microscopy. In the center of each spherulite, a "core" of less regularly oriented material is observed, whose size decreases when the spherulites are formed in the presence of increasing concentrations of NaCl. Similarly, amyloid fibrils form faster in the presence of NaCl than in its absence. A smaller enhancement of the rate of formation with salt concentration is observed for spherulites. These data suggest that both amyloid fibril formation and random aggregation occur concurrently under the conditions tested. Changes in their relative rates result in the different-sized cores observed in the spherulites. This mechanism can be likened to that leading to the formation of spherulites of polyethylene, in agreement with observations that polypeptide chains under partially denaturing conditions can exhibit behavior not dissimilar to that of synthetic polymers.     

Ultrastructural organization of amyloid fibrils by atomic force microscopy

Atomic force microscopy has been employed to investigate the structural organization of amyloid fibrils produced in vitro from three very different polypeptide sequences. The systems investigated are a 10-residue peptide derived from the sequence of transthyretin, the 90-residue SH3 domain of bovine phosphatidylinositol-3'-kinase, and human wild-type lysozyme, a 130-residue protein containing four disulfide bridges. The results demonstrate distinct similarities between the structures formed by the different classes of fibrils despite the contrasting nature of the polypeptide species involved. SH3 and lysozyme fibrils consist typically of four protofilaments, exhibiting a left-handed twist along the fibril axis. The substructure of TTR(10-19) fibrils is not resolved by atomic force microscopy and their uniform appearance is suggestive of a regular self-association of very thin filaments. We propose that the exact number and orientation of protofilaments within amyloid fibrils is dictated by packing of the regions of the polypeptide chains that are not directly involved in formation of the cross-beta core of the fibrils. The results obtained for these proteins, none of which is directly associated with any human disease, are closely similar to those of disease-related amyloid fibrils, supporting the concept that amyloid is a generic structure of polypeptide chains. The detailed architecture of an individual fibril, however, depends on the manner in which the protofilaments assemble into the fibrillar structure, which in turn is dependent on the sequence of the polypeptide and the conditions under which the fibril is formed.     

Prediction of "aggregation-prone" and "aggregation-susceptible" regions in proteins associated with neurodegenerative diseases

Increasing evidence indicates that many peptides and proteins can be converted in vitro into highly organised amyloid structures, provided that the appropriate experimental conditions can be found. In this work, we define intrinsic propensities for the aggregation of individual amino acids and develop a method for identifying the regions of the sequence of an unfolded peptide or protein that are most important for promoting amyloid formation. This method is applied to the study of three polypeptides associated with neurodegenerative diseases, Abeta42, alpha-synuclein and tau. In order to validate the approach, we compare the regions of proteins that are predicted to be most important in driving aggregation, either intrinsically or as the result of mutations, with those determined experimentally. The knowledge of the location and the type of the "sensitive regions" for aggregation is important both for rationalising the effects of sequence changes on the aggregation of polypeptide chains and for the development of targeted strategies to combat diseases associated with amyloid formation.     

Mutational analysis of the propensity for amyloid formation by a globular protein

Acylphosphatase can be converted in vitro, by addition of trifluoroethanol (TFE), into amyloid fibrils of the type observed in a range of human diseases. The propensity to form fibrils has been investigated for a series of mutants of acylphosphatase by monitoring the range of TFE concentrations that result in aggregation. We have found that the tendency to aggregate correlates inversely with the conformational stability of the native state of the protein in the different mutants. In accord with this, the most strongly destabilized acylphosphatase variant forms amyloid fibrils in aqueous solution in the absence of TFE. These results show that the aggregation process that leads to amyloid deposition takes place from an ensemble of denatured conformations under conditions in which non-covalent interactions are still favoured. These results support the hypothesis that the stability of the native state of globular proteins is a major factor preventing the in vivo conversion of natural proteins into amyloid fibrils under non-pathological conditions. They also suggest that stabilizing the native states of amyloidogenic proteins could aid prevention of amyloidotic diseases.     

Effects of randomizing the Sup35NM prion domain sequence on formation of amyloid fibrils in vitro

The mechanism by which proteins aggregate and form amyloid fibrils is still elusive. In order to preclude interference by cellular factors and to clarify the role of the primary sequence of Sup35p prion domain in formation of amyloid fibrils, we generated five Sup35NM variants by randomizing amino acid sequences in PrDs without altering the amino acid composition and analyzed the in vitro process of amyloid fibril formation. The results showed that each of the five Sup35NM variants polymerized into amyloid fibrils in vitro under native conditions. Furthermore, the Sup35NM variants showed differences in their aggregation time courses. These findings indicate that specific amino acid sequence features in PrD can modify the rate of conversion of Sup35p into amyloid fibrils in vitro.     

Chemical modification of insulin in amyloid fibrils

We have investigated the chemical modification of insulin under conditions that promote the conversion of the soluble protein into amyloid fibrils. The modifications that are incorporated into the fibrils include deamidation of Asn A21, Asn B3, and Gln B4. In order to prepare fibrils with minimal deamidation of these residues, the kinetics of aggregation were accelerated by seeding with aliquots of a solution containing preformed fibrils. The resulting fibrils were then reincubated to determine the extent to which chemical modification occurs in the fibril itself. The deamidation of Asn A21 in particular could be followed in detail. Deamidation of this residue in the fibrillar form of insulin was found to occur in only 52 +/- 5% of molecules. This result indicates that there are at least two different packing environments of insulin molecules in the fibrils and suggests that the characterization of chemical modifications may be a useful probe of the environment of polypeptide chains within amyloid fibrils.     

Prevention of amyloid-like aggregation as a driving force of protein evolution

Uncontrolled protein aggregation is a constant challenge in all compartments of living organisms. The failure of a peptide or protein to remain soluble often results in pathology. So far, more than 40 human diseases have been associated with the formation of extracellular fibrillar aggregates - known as amyloid fibrils - or structurally related intracellular deposits. It is well known that molecular chaperones and elaborate quality control mechanisms exist in the cell to counteract aggregation. However, an increasing number of reports during the past few years indicate that proteins have also evolved structural and sequence-based strategies to prevent aggregation. This review describes these strategies and the selection pressures that exist on protein sequences to combat their uncontrolled aggregation. We will describe the different types of mechanism evolved by proteins that adopt different conformational states including normally folded proteins, intrinsically disordered polypeptide chains, elastomeric systems and multimodular proteins.     

Amyloid formation modulates the biological activity of a bacterial protein

The aggregation of proteins into amyloid fibrils is the hallmark feature of a group of late-onset degenerative diseases including Alzheimer, Parkinson, and prion diseases. We report here that microcin E492, a peptide naturally produced by Klebsiella pneumoniae that kills bacteria by forming pores in the cytoplasmic membrane, assembles in vitro into amyloid-like fibrils. The fibrils have the same structural, morphological, tinctorial, and biochemical properties as the aggregates observed in the disease conditions. In addition, we found that amyloid formation also occurs in vivo where it is associated with a loss of toxicity of the protein. The finding that microcin E492 naturally exists both as functional toxic pores and as harmless fibrils suggests that protein aggregation into amyloid fibrils is an evolutionarily conserved property of proteins that can be successfully employed by bacteria to fulfill specific physiological needs.     

Early events in insulin fibrillization studied by time-lapse atomic force microscopy

The importance of understanding the mechanism of protein aggregation into insoluble amyloid fibrils lies not only in its medical consequences, but also in its more basic properties of self-organization. The discovery that a large number of uncorrelated proteins can form, under proper conditions, structurally similar fibrils has suggested that the underlying mechanism is a general feature of polypeptide chains. In this work, we address the early events preceding amyloid fibril formation in solutions of zinc-free human insulin incubated at low pH and high temperature. Here, we show by time-lapse atomic force microscopy that a steady-state distribution of protein oligomers with a quasiexponential tail is reached within a few minutes after heating. This metastable phase lasts for a few hours, until fibrillar aggregates are observable. Although for such complex systems different aggregation mechanisms can occur simultaneously, our results indicate that the prefibrillar phase is mainly controlled by a simple coagulation-evaporation kinetic mechanism, in which concentration acts as a critical parameter. These experimental facts, along with the kinetic model used, suggest a critical role for thermal concentration fluctuations in the process of fibril nucleation.     

A common beta-sheet architecture underlies in vitro and in vivo beta2-microglobulin amyloid fibrils

Misfolding and aggregation of normally soluble proteins into amyloid fibrils and their deposition and accumulation underlies a variety of clinically significant diseases. Fibrillar aggregates with amyloid-like properties can also be generated in vitro from pure proteins and peptides, including those not known to be associated with amyloidosis. Whereas biophysical studies of amyloid-like fibrils formed in vitro have provided important insights into the molecular mechanisms of amyloid generation and the structural properties of the fibrils formed, amyloidogenic proteins are typically exposed to mild or more extreme denaturing conditions to induce rapid fibril formation in vitro. Whether the structure of the resulting assemblies is representative of their natural in vivo counterparts, thus, remains a fundamental unresolved issue. Here we show using Fourier transform infrared spectroscopy that amyloid-like fibrils formed in vitro from natively folded or unfolded beta(2)-microglobulin (the protein associated with dialysis-related amyloidosis) adopt an identical beta-sheet architecture. The same beta-strand signature is observed whether fibril formation in vitro occurs spontaneously or from seeded reactions. Comparison of these spectra with those of amyloid fibrils extracted from patients with dialysis-related amyloidosis revealed an identical amide I' absorbance maximum, suggestive of a characteristic and conserved amyloid fold. Our results endorse the relevance of biophysical studies for the investigation of the molecular mechanisms of beta(2)-microglobulin fibrillogenesis, knowledge about which may inform understanding of the pathobiology of this protein.     

Molecular structure of amyloid fibrils: insights from solid-state NMR

Solid-state nuclear magnetic resonance (NMR) measurements have made major contributions to our understanding of the molecular structures of amyloid fibrils, including fibrils formed by the beta-amyloid peptide associated with Alzheimer's disease, by proteins associated with fungal prions, and by a variety of other polypeptides. Because solid-state NMR techniques can be used to determine interatomic distances (both intramolecular and intermolecular), place constraints on backbone and side-chain torsion angles, and identify tertiary and quaternary contacts, full molecular models for amyloid fibrils can be developed from solid-state NMR data, especially when supplemented by lower-resolution structural constraints from electron microscopy and other sources. In addition, solid-state NMR data can be used as experimental tests of various proposals and hypotheses regarding the mechanisms of amyloid formation, the nature of intermediate structures, and the common structural features within amyloid fibrils. This review introduces the basic experimental and conceptual principles behind solid-state NMR methods that are applicable to amyloid fibrils, reviews the information about amyloid structures that has been obtained to date with these methods, and discusses how solid-state NMR data provide insights into the molecular interactions that stabilize amyloid structures, the generic propensity of polypeptide chains to form amyloid fibrils, and a number of related issues that are of current interest in the amyloid field.     

Biophysical studies of the development of amyloid fibrils from a peptide fragment of cold shock protein B.

The peptide CspB-1, which represents residues 1-22 of the cold shock protein CspB from Bacillus subtilis, has been shown to form amyloid fibrils when solutions containing this peptide in aqueous (50%) acetonitrile are diluted in water [M. Gross et al. (1999) Protein Science 8, 1350-1357] We established conditions in which reproducible kinetic steps associated with the formation of these fibrils can be observed. Studies combining these conditions with a range of biophysical methods reveal that a variety of distinct events occurs during the process that results in amyloid fibrils. A CD spectrum indicative of beta structure is observed within 1 min of the solvent shift, and its intensity increases on a longer timescale in at least two kinetic phases. The characteristic wavelength shift of the amyloid-binding dye Congo Red is established within 30 min of the initiation of the aggregation process and corresponds to one of the phases observed by CD and to changes in the Fourier transform-infrared spectrum indicative of beta structure. Short fibrillar structures begin to be visible under the electron microscope after these events, and longer, well-defined amyloid fibrils are established on a timescale of hours. NMR spectroscopy shows that there are no significant changes in the concentration of monomeric species in solution during the events leading to fibril formation, but that soluble aggregates too large to be visible in NMR spectra are present throughout the process. A model for amyloid formation by this peptide is presented which is consistent with these kinetic data and with published work on a variety of disease-related systems. These findings support the concept that the ability to form amyloid fibrils is a generic property of polypeptide chains, and that the mechanism of their formation is similar for different peptides and proteins.     

Non-fibrillar components of amyloid deposits mediate the self-association and tangling of amyloid fibrils

Amyloid deposits are proteinaceous extra-cellular aggregates associated with a diverse range of disease states. These deposits are composed predominantly of amyloid fibrils, the unbranched, beta-sheet rich structures that result from the misfolding and subsequent aggregation of many proteins. In addition, amyloid deposits contain a number of non-fibrillar components that interact with amyloid fibrils and are incorporated into the deposits in their native folded state. The influence of a number of the non-fibrillar components in amyloid-related diseases is well established; however, the mechanisms underlying these effects are poorly understood. Here we describe the effect of two of the most important non-fibrillar components, serum amyloid P component and apolipoprotein E, upon the solution behavior of amyloid fibrils in an in vitro model system. Using analytical ultracentrifugation, electron microscopy, and rheological measurements, we demonstrate that these non-fibrillar components cause soluble fibrils to condense into localized fibrillar aggregates with a greatly enhanced local density of fibril entanglements. These results suggest a possible mechanism for the observed role of non-fibrillar components as mediators of amyloid deposition and deposit stability.     

Insight into the structure of amyloid fibrils from the analysis of globular proteins

The conversion from soluble states into cross-β fibrillar aggregates is a property shared by many different proteins and peptides and was hence conjectured to be a generic feature of polypeptide chains. Increasing evidence is now accumulating that such fibrillar assemblies are generally characterized by a parallel in-register alignment of β-strands contributed by distinct protein molecules. Here we assume a universal mechanism is responsible for β-structure formation and deduce sequence-specific interaction energies between pairs of protein fragments from a statistical analysis of the native folds of globular proteins. The derived fragment–fragment interaction was implemented within a novel algorithm, prediction of amyloid structure aggregation (PASTA), to investigate the role of sequence heterogeneity in driving specific aggregation into ordered self-propagating cross-β structures. The algorithm predicts that the parallel in-register arrangement of sequence portions that participate in the fibril cross-β core is favoured in most cases. However, the antiparallel arrangement is correctly discriminated when present in fibrils formed by short peptides. The predictions of the most aggregation-prone portions of initially unfolded polypeptide chains are also in excellent agreement with available experimental observations. These results corroborate the recent hypothesis that the amyloid structure is stabilised by the same physicochemical determinants as those operating in folded proteins. They also suggest that side chain–side chain interaction across neighbouring β-strands is a key determinant of amyloid fibril formation and of their self-propagating ability.     

The role of protein sequence and amino acid composition in amyloid formation: scrambling and backward reading of IAPP amyloid fibrils

The specific functional structure of natural proteins is determined by the way in which amino acids are sequentially connected in the polypeptide. The tight sequence/structure relationship governing protein folding does not seem to apply to amyloid fibril formation because many proteins without any sequence relationship have been shown to assemble into very similar β-sheet-enriched structures. Here, we have characterized the aggregation kinetics, seeding ability, morphology, conformation, stability, and toxicity of amyloid fibrils formed by a 20-residue domain of the islet amyloid polypeptide (IAPP), as well as of a backward and scrambled version of this peptide. The three IAPP peptides readily aggregate into ordered, β-sheet-enriched, amyloid-like fibrils. However, the mechanism of formation and the structural and functional properties of aggregates formed from these three peptides are different in such a way that they do not cross-seed each other despite sharing a common amino acid composition. The results confirm that, as for globular proteins, highly specific polypeptide sequential traits govern the assembly pathway, final fine structure, and cytotoxic properties of amyloid conformations.     

What the use of disease-unrelated model proteins can tell us about the molecular basis of amyloid aggregation and toxicity

Recent advances in the studies on protein aggregation have led to a reappraisal of the concepts underlying this process. The data reported in the last few years showing that protein aggregation into assemblies of amyloid type can be considered a generic property of the polypeptide chains suggest that protein aggregation in cells can be a more common phenomenon than previously believed. Furthermore, the findings that aggregates of disease-unrelated proteins display the same cytotoxicity as those formed by proteins and peptides associated with disease suggest that toxicity is a consequence of the common structure of aggregates and that, at least in most cases, it proceeds by impairing common cellular parameters such as free Ca2+ and ROS levels. The new view that aggregation of polypeptide chains and aggregate toxicity are not linked to specific amino acid sequences rises dramatically the number of sequences one can investigate to assess the molecular features underlying protein aggregation and the molecular basis of aggregate toxicity. In addition, it rises intriguing considerations on protein and cell evolution as well as on amyloid disease pathogenesis.     

Computational models for the prediction of polypeptide aggregation propensity

In amyloid fibrils, beta-strand conformations of polypeptide chains, or segments thereof, are perpendicular to the fibril axis, but knowledge of their three dimensional structure at atomic level of detail is scarce. Two types of computational approaches have been developed recently for investigating the aggregation propensity of peptides and proteins and identifying the segments most prone to form fibrils (hot spots). The physicochemical properties of the natural amino acids (e.g. beta-propensity, hydrophobicity, aromatic content and charge) have been used to derive phenomenological models able to predict changes in aggregation rate upon mutation, as well as absolute rates and hot spots. Applications of these models to entire proteomes have provided evidence that intrinsically disordered proteins are less amyloidogenic than globular proteins. In the second type of approach, amyloidogenic polypeptides have been decomposed into overlapping segments, and atomistic simulations of three or more copies of each segment have been performed to obtain insights into aggregation propensity and structural details of the ordered aggregates (e.g. turn regions).     

Mutagenic exploration of the cross-seeding and fibrillation propensity of Alzheimer's beta-amyloid peptide variants

Amyloid formation is a nucleation-dependent process that is accelerated dramatically in vivo and in vitro upon addition of appropriate fibril seeds. A potent species barrier can be effective in this reaction if donor and recipient come from different biological species. This species barrier is thought to reflect differences in the amino acid sequence between seed and target polypeptide. Here we present an in vitro mutagenic cross-seeding analysis of Alzheimer's Abeta(1-40) peptide in which we mapped out the effect of systematically varied amino acid replacements on the propensity of seed-dependent amyloid fibril formation. We find that the susceptibility of different peptides toward cross-seeding relates to the intrinsic aggregation propensity of the respective polypeptide chain and, therefore, to properties such as beta-sheet propensity and hydrophobicity. These data imply that the seed-dependent formation of amyloid-like fibrils is affected by the intrinsic properties of the polypeptide chain in a manner that is similar to what has been described previously for aggregation reactions in general. Hence, the nucleus acts in this case as a catalyst that promotes the fibrillation of different polypeptide chains according to their intrinsic structural predilection.