Nucleotide sequence of the regulatory region of malB operons in E. coli

The nucleotide sequence of a cloned section of the Escherichia coli chromosome containing the promoter regions of the malB divergent operons was determined. The region of the proximal gene, malE of the malEFG operon, was identified on the basis of the known amino acid sequence of the precursor molecule of maltose-binding protein. The region of malK, the proximal gene of the malKlamB operon, was deduced from the observation that a cloned segment contains an amino-terminal portion of the malK gene. The non-coding region between malE and malK is 299 base pairs long and contains two long GC clusters. Another feature of this region that may be related to the regulation of gene expression is the presence of two palindromic structures between the GC clusters. The DNA regions binding to cyclic AMP binding protein were determined by a method using polyacrylamide gel electrophoresis. The sites are thought to be located close to GC clusters.     

Mutations in the promoter regions of the malEFG and malK-lamB operons of Escherichia coli K12

The malB region of Escherichia coli is composed of two operons, malEFG and malK-lamB, transcribed divergently from a control region located between the malE and malK genes. Expression of the malB operons is under the positive control of the malT gene product (MalT) and maltose and of the crp gene product (CRP) and cyclic AMP. Strains in which the lac genes have been fused to malE or malK are unable to use lactose as carbon source if they have been deleted for malT or crp. Mutations in the malB region allowing such fusion strains to grow on lactose have been isolated. These and previously isolated mutations were genetically characterized. As regards the malEp promoter mutations, malEp9, malEp1 and malEp6 create new promoters that are MalT and CRP independent. malEp9 and malEp1 change residues -1 and -2, respectively, of malEp without altering its activity. malEp6 duplicates six base-pairs between residues -22 and -23. malEp3 improves the -10 region hexamer. malEp5 deletes residues -29 to -62. It creates a new promoter that is MalT independent, CRP dependent, likely by fusing together functional regions of malEp that are normally apart. malEp5 also reduces the expression of malK-lamB, suggesting the existence of a link between the malEp and malKp promoters. As regards the malKp mutations, malKp6 changes residue -81 of malKp without altering its activity. It creates a new promoter, which is MalT independent, CRP dependent, likely by using a pre-existing cyclic AMP/CRP binding site. malKp102 changes residue -36, two bases upstream of the -35 region hexamer. It decreases the activity of malKp by at least four orders of magnitude and likely alters the MalT binding site. These results are discussed in terms of regulatory interactions within the malB control region.     

Structure of the malB region in Escherichia coli K12. III. Correlation of the genetic map with the restriction map.

A correlation between the genetic and physical maps of the malB region was obtained by performing a restriction cleavage analysis of DNA's carrying various genetically characterized malB deletions. This also allowed to localize the boundaries between malF and malE, malE and malK, mal K and lamB on the restriction map. The genetic map is not grossly distorted with respect to the physical map.     

Selection for High Mutation Rates in Chemostats

Complementation and polarity suppression data are interpreted in terms of the genetic structure of the maltose B region. It is proposed that this region comprises two divergent operons. One operon includes malK, a cistron involved in maltose permeation, and lamB the only known cistron specifically involved in lambda receptor synthesis. The other operon includes malJ(1) and malJ(2) which are most probably two different cistrons, both involved in maltose permeation*. It is further assumed that expression of the two operons is controlled by malT, the positive regulatory gene of the maltose system, located in the malA region. The target(s) for the action of the malT product is (are) most likely to be located between malJ(1) and malK. There is an indication that the two operons might overlap in the region of their promoters. The structure of such an overlap as well as the possible function of the products of the different cistrons in malB are briefly discussed.     

malB Region in Escherichia coli K-12: Characterization of New Mutations

Phenotypic characterization and mapping of more than 50 Mal(-) mutations located in the malB region lead one to divide the site for Mal(-)lambdas mutations (formerly called gene malB) in that region, into two adjacent genetic segments malJ and malK. malJ and malK are both involved in maltose permeation. It is suggested that (i) malK and lamB, the only known gene specifically involved in phage lambda adsorption (20), constitute an operon of polarity malK lamB. (ii) malJ and malK correspond to two different genes, and (iii) a promoter for the malK lamB operon is located between malJ and malK. Since lambda receptors and maltose permease are inducible by maltose and absent in malT mutants, it is likely that the expression of the malK lamB operon is controlled by the product of gene malT, the positive regulatory gene of the maltose system.     

Transposon Tn10-dependent expression of the lamB gene in Escherichia coli.

Among Tn10 insertions isolated in or near the malB region of Escherichia coli, one (zjb-729::Tn10) mapped between malK and lamB or late in malK and allowed MalT-independent expression of lamB. Tn10-dependent expression of a lamB-lacZ protein fusion was 25% of the expression of the fusion from the malK-lamB operon promoter in malTc constitutive strains. The maltoporin content of a strain carrying this Tn10 was about 20% that of a malTc malB+ strain. Transport of maltose at concentrations of below 10(-6) M was reduced about threefold. When maltoporin was present at about 50% of the level of malTc malB+ strains, maltose transport was largely restored. We conclude that maltoporin is not rate limiting for maltose transport in wild-type cells but becomes rate limiting when the ratio of maltoporin to other maltose transport components is reduced more than twofold.     

Cloning, sequence, and expression of the Drosophila cAMP-dependent protein kinase catalytic subunit gene

Genomic DNA containing the protein coding region for Drosophila cAMP-dependent protein kinase catalytic subunit has been cloned and sequenced. The probe used to detect and isolate the gene fragment was constructed from two partially complementary synthetic oligonucleotides and contains 60 base pairs that encode (using Drosophila codon preferences) amino acids 195-214 of the beef heart catalytic subunit. In reduced stringency hybridization conditions, the probe recognizes two target sites in fly genomic DNA with 85% homology. One of these sites is in the cAMP-dependent protein kinase catalytic subunit gene, which was isolated as a 3959-base pair HindIII fragment. This fragment contains all of the protein coding portion, 900 base pairs upstream of the initiator ATG, and 2000 base pairs downstream of the termination codon (TAG). The coding portion of the gene contains no introns and yields a protein of 352 amino acids. There is a 2-amino acid insertion near the N terminus of the fly protein relative to the beef and mouse enzymes. Of the remaining 350 amino acids, 273 are invariant in the three species. A probe derived from the coding sequence of the HindIII clone hybridizes strongly to a 5100-base poly(A)+ RNA and weakly to 4100- and 3400-base poly(A)+ RNAs expressed in adult flies. A 2100-base pair EcoRI genomic fragment containing the second site recognized by the 60-base pair probe has also been cloned. DNA sequence analysis demonstrates that this fragment is part of the cGMP-dependent protein kinase gene or a close homolog. The catalytic subunit gene and the cGMP-dependent protein kinase gene have been located in regions 30C and 21D, respectively, of chromosome 2.     

Lrp, a major regulatory protein in Escherichia coli, bends DNA and can organize the assembly of a higher-order nucleoprotein structure.

Lrp (Leucine-responsive regulatory protein) is a global regulatory protein that controls the expression of many operons in Escherichia coli. One of those operons, ilvIH, contains six Lrp binding sites located within a several hundred base pair region upstream of the promoter region. Analysis of the binding of Lrp to a set of circularly permuted DNA fragments from this region indicates that Lrp induces DNA bending. The results of DNase I footprinting experiments suggest that Lrp binding to this region facilitates the formation of a higher-order nucleoprotein structure. To define more precisely the degree of bending associated with Lrp binding, one or two binding sites were separately cloned into a pBend vector and analyzed. Lrp induced a bend of approximately 52 degrees upon binding to a single binding site, and the angle of bending is increased to at least 135 degrees when Lrp binds to two adjacent sites. Lrp-induced DNA bending, and a natural sequence-directed bend that exists within ilvIH DNA, may be architectural elements that facilitate the assembly of a nucleoprotein complex.     

DNA sequence of the 16S rRNA/23S rRNA intercistronic spacer of two rDNA operons of the archaebacterium Methanococcus vannielii

The DNA sequence of the spacer (plus flanking) regions separating the 16S rRNA and 23S rRNA genes of two presumptive rDNA operons of the archaebacterium Methanococcus vannielii was determined. The spacers are 156 and 242 base pairs in size and they share a sequence homology of 49 base pairs following the 3' terminus of the 16S rRNA gene and of about 60 base pairs preceding the 5' end of the 23S rRNA gene. The 242 base pair spacer, in addition contains a sequence which can be transcribed into tRNAAla, whereas no tRNA-like secondary structure can be delineated from the 156 base pair spacer region. Almost complete sequence homology was detected between the end of the 16S rRNA gene and the 3' termini of either Escherichia coli or Halobacterium halobium 16S rRNA, whereas the putative 5' terminal 23S rRNA sequence shared partial homology with E. coli 23S rRNA and eukaryotic 5.8S rRNA.     

Identification of a cytoplasmic membrane-associated component of the maltose transport system of Escherichia coli

The maltose transport system of Escherichia coli contains at least five components, three of which, i.e. the products of lamB, malE, and malF genes, have so far been identified as constituents of the outer membrane, periplasmic space, and cytoplasmic membrane, respectively. We identified another component, a cytoplasmic membrane protein of an apparent molecular weight of 43,000, as the product of the malK gene on the basis of polyacrylamide gel electrophoretic analysis of various mutants and suppressed strains and by the incorporation of extra tyrosine residue into this proten in malK amber mutants containing the suppressor Su3+ allele. The transport of maltose thus appears to require at least two proteins associated with the cytoplasmic membrane.     

Sequence of the malK gene in E.coli K12.

We present the sequence of gene malK which encodes a component of the system for maltose transport in E.coli K12. We also determined the position of deletion (S50) which fuses malK to the following gene lamB; the malK-lamB protein hybrid contains all of the malK protein. The mRNA corresponding to the last two thirds of gene malK could form stable stem and loop structures. The malK protein, as deduced from the gene sequence, would include 370 residues and correspond to a molecular weight of 40700. The sequence as well as sequence comparisons with the ndh protein of E.coli are discussed in terms of the location and function of the malK protein.     

Molecular cloning and comparative sequence analyses of rRNA operons in Streptomyces nodosus ATCC 14899.

The genome of Streptomyces nodosus contains six ribosomal RNA (rRNA) operons. Four of the rRNA operons; rrnB, rrnD, rrnE and rrnF were cloned. We have completely sequenced all four operons, including a region 750 base pairs (bp) upstream of the 16S rRNA gene. The three rRNA genes present in each operon were closely linked in the order 16S-23S-5S. A sequence comparison of the four operons showed more than 99% sequence similarity between the corresponding 16S and 23S rRNA genes, and more than 97% similarity between 5S rRNA genes. The sequence differences observed between 23S rRNA genes appeared to be localized in two specific regions. Substantial sequence differences were found in the region upstream of the 16S rRNA gene as well as in the internal transcribed spacers. No tRNA gene was found in the 16S-23S spacer regions.     

Isolation and nucleotide sequence of a mouse histidine tRNA gene.

We have sequenced a 1307 base pair mouse genomic DNA fragment which contains a histidine tRNA gene. The sequence of the putative mouse histidine tRNA differs from the published sequence of sheep liver histidine tRNA by a single base change in the D-loop. It does not contain an unpaired 5' terminal G residue, as reported for Drosophila and sheep histidine tRNAs. The gene does not contain introns. The 3' flanking region contains a typical RNA polymerase III termination site of 6 consecutive T residues. 523 residues after the 3' end of the his tRNA coding region, the mouse DNA contains a sequence 72% homologous to part of the consensus sequence of the B1 (alu) family.     

Nucleotide sequence of the glnA control region of Escherichia coli

The RNA polymerase binding sites present along a DNA segment encompassing the glnA, glnL, and glnG genes have been identified in a hybrid plasmid carrying this chromosomal region of Escherichia coli. The DNA sequence was determined of an 817 base pair segment that contains the region coding for the first 42 amino acids of the NH2-terminal and of the glnA structural gene, as well as its regulatory region. Analysis of this nucleotide sequence revealed three probable RNA polymerase recognition sites, imperfect palindromes, inverted repeats, and direct repeated sequences.     

The high-affinity maltose/trehalose ABC transporter in the extremely thermophilic bacterium Thermus thermophilus HB27 also recognizes sucrose and palatinose

We have studied the transport of trehalose and maltose in the thernophilic bacterium Thermus thermophilus HB27, which grows optimally in the range of 70 to 75 degrees C. The K(m) values at 70 degrees C were 109 nM for trehalose and 114 nM for maltose; also, a high K(m) (424 nM) was found for the uptake of sucrose. Competition studies showed that a single transporter recognizes trehalose, maltose, and sucrose, while d-galactose, d-fucose, l-rhamnose, l-arabinose, and d-mannose were not competitive inhibitors. In the recently published genome of T. thermophilus HB27, two gene clusters designated malEFG1 (TTC1627 to -1629) and malEFG2 (TTC1288 to -1286) and two monocistronic genes designated malK1 (TTC0211) and malK2 (TTC0611) are annotated as trehalose/maltose and maltose/maltodextrin transport systems, respectively. To find out whether any of these systems is responsible for the transport of trehalose, the malE1 and malE2 genes, lacking the sequence encoding the signal peptides, were expressed in Escherichia coli. The binding activity of pure recombinant proteins was analyzed by equilibrium dialysis. MalE1 was able to bind maltose, trehalose, and sucrose but not glucose or maltotetraose (K(d) values of 103, 67, and 401 nM, respectively). Mutants with disruptions in either malF1 or malK1 were unable to grow on maltose, trehalose, sucrose, or palatinose, whereas mutants with disruption in malK2 or malF2 showed no growth defect on any of these sugars. Therefore, malEFG1 encodes the binding protein and the two transmembrane subunits of the trehalose/maltose/sucrose/palatinose ABC transporter, and malK1 encodes the ATP-binding subunit of this transporter. Despite the presence of an efficient transporter for trehalose, this compound was not used by HB27 for osmoprotection. MalE1 and MalE2 exhibited extremely high thermal stability: melting temperatures of 90 degrees C for MalE1 and 105 degrees C for MalE2 in the presence of 2.3 M guanidinium chloride. The latter protein did not bind any of the sugars examined and is not implicated in a maltose/maltodextrin transport system. This work demonstrates that malEFG1 and malK1 constitute the high-affinity ABC transport system of T. thermophilus HB27 for trehalose, maltose, sucrose, and palatinose.     

The spread of sequence variants in Rattus satellite DNAs

The genus Rattus has two related families of satellite DNA: Satellite I consists of tandem arrays of a 370 base pair repeat unit which is a dimer of two 185 base pair portions (a, b) which are about 60% homologous. Satellite I' consists of tandem arrays of a 185 base pair repeat unit (a') which is about 85% homologous to a and 60% homologous to b. R. norvegicus contains only satellite I but R. rattus contains both satellites I and I'. We examined certain aspects of satellite DNA evolution by comparing the spacing at which variant repeat units of each satellite have spread among non-variant repeat units in these two species. With but one exception, in R. rattus, 15 different variant repeat units have spread among non-variant repeat units of satellite I, with a spacing equal to the length of the (a,b) dimer. Similarly, fourteen different variant repeat units of the monomeric satellite I' have mixed among non-variant repeat units with a spacing equal to the length of the (a') monomer. These results suggest that a mechanism involving homologous interaction among satellite sequences could account for the spread of variant family members. We also found that a sequence variant present in certain portions of the dimeric repeat unit of satellite I is more efficiently amplified (or less efficiently corrected) than variants occurring in other regions. This was not true for the monomeric repeat unit of satellite I'.