Conformational study of Ac-Xaa-Pro-NHMe dipeptides: proline puckering and trans/cis imide bond.

The conformational study on 20 Ac-Xaa-Pro-NHMe dipeptides has been carried out using an empirical potential function ECEPP/3 in order to investigate the factors responsible for the preference of proline puckering of the peptides with the trans or cis imide bond preceding the proline. The general conformational preference for down- and up-puckered dipeptides is calculated as trans-down > trans-up > cis-down > cis-up, which is reasonably in accord with that estimated by analyzing X-ray structures of proteins and the result for the single proline residue. The overestimated occurrence of trans-down conformations of proline seems to be caused by excluding long-range interactions that short dipeptides cannot have. The average computed occurrence of dipeptides with cis imide bonds is about 3%, somewhat lower than the value calculated for Ac-Pro-NHMe, which is close to experimental estimates obtained from X-ray structures of proteins. In particular, the interaction of the aromatic side chain of Xaa residue with the proline ring appears not to be strong enough to stabilize the stacked conformations of small dipeptides with cis imide bonds. The propensity to adopt trans or cis imide bond and to form secondary structures of Xaa-Pro sequences is discussed and compared with results obtained from X-ray structures of proteins.     

Analysis of the steric strain in the polypeptide backbone of protein molecules.

The extent to which local strain is present in the polypeptide backbone of folded protein molecules has been examined. The occurrence of steric strain associated with nonproline cis peptide bonds and energetically unfavorable main chain dihedral angles can be identified reliably from the well ordered parts of high resolution, refined crystal structures. The analysis reveals that there are relatively few sterically strained features. Those that do occur are located overwhelmingly in regions concerned with function. We attribute this to the greater precision necessary for ligand binding and catalysis, compared with the requirements of satisfactory folding.     

Structural mechanism governing cis and trans isomeric states and an intramolecular switch for cis/trans isomerization of a non-proline peptide bond observed in crystal structures of scorpion toxins

Non-proline cis peptide bonds have been observed in numerous protein crystal structures even though the energetic barrier to this conformation is significant and no non-prolyl-cis/trans-isomerase has been identified to date. While some external factors, such as metal binding or co-factor interaction, have been identified that appear to induce cis/trans isomerization of non-proline peptide bonds, the intrinsic structural basis for their existence and the mechanism governing cis/trans isomerization in proteins remains poorly understood. Here, we report the crystal structure of a newly isolated neurotoxin, the scorpion alpha-like toxin Buthus martensii Karsch (BmK) M7, at 1.4A resolution. BmK M7 crystallizes as a dimer in which the identical non-proline peptide bond between residues 9 and 10 exists either in the cis conformation or as a mixture of cis and trans conformations in either monomer. We also determined the crystal structures of several mutants of BmK M1, a representative scorpion alpha-like toxin that contains an identical non-proline cis peptide bond as that observed in BmK M7, in which residues within or neighboring the cis peptide bond were altered. Substitution of an aspartic acid residue for lysine at residue 8 in the BmK M1 (K8D) mutant converted the cis form of the non-proline peptide bond 9-10 into the trans form, revealing an intramolecular switch for cis-to-trans isomerization. Cis/trans interconversion of the switch residue at position 8 appears to be sequence-dependent as the peptide bond between residues 9 and 10 retains its wild-type cis conformation in the BmK M1 (K8Q) mutant structure. The structural interconversion of the isomeric states of the BmK M1 non-proline cis peptide bond may relate to the conversion of the scorpion alpha-toxins subgroups.     

The nature of the turn in omega loops of proteins

An analysis of Omega loops in a nonredundant set of protein structures from the Protein Data Bank has been carried out to determine the nature of the "turn elements" present. Because Omega loops essentially reverse their direction in three-dimensional space, this analysis was made with respect to four turn elements identified as (1) Gly; (2) Pro; (3) a residue with alpha-helical phi,psi angles, termed a helical residue; and (4) a cis peptide. A set of 1079 Omega loops from a set of 680 proteins were used for the analysis. Apart from other criteria that define Omega loops, the selection of an Omega loop from a cluster of loops is based on an exposure index. In this study, analyses have been made with two sets of data: (1) Omega loops arising from a minimum exposure index indicative of a less exposed loop (xmin set) and (2) Omega loops with a maximum exposure index indicative of a relatively exposed loop (xmax set). Overall residue preferences and positional preferences have been examined. Positions of the turn elements for Omega loops of varying length have also been studied. Specific positional preferences are observed for particular turn elements with regard to the length of Omega loops. Analysis in terms of the turn elements can provide guidelines for modeling of loops in proteins. Apart from Pro, which has the natural tendency to form cis peptide bonds, a higher occurrence of non-Pro cis peptide bonds is observed. Torsion angles in Omega loops also indicate the occurrence of a large number of residues with helical phi,psi angles, necessary for the turn in the loop structures.     

PBOND： Web Server for the Prediction of Proline and Non-Proline cis / trans Isomerization

PBOND is a web server that predicts the conformation of the peptide bond between any two amino acids. PBOND classifies the peptide bonds into one out of four classes, namely cis imide (cis-Pro), cis amide (cis-nonPro), trans imide (trans-Pro) and trans amide (trans-nonPro). Moreover, for every prediction a reliability index is computed. The underlying structure of the server consists of three stages: (1) feature extraction, (2) feature selection and (3) peptide bond clas- sification. PBOND can handle both s...     

Intramolecularly hydrogen-bonded peptide conformations

Over the past few years the possible occurrence of intramolecularly hydrogen-bonded structures in linear and cyclic peptides has attracted increasing attention. In this review emphasis is given to solid-state studies, particularly by X-ray diffraction and infrared absorption techniques. Conformational energy calculations are also considered. The discussion is focused both on model peptides and biological activity polypeptide molecules. The tetrapeptide system (Formula: see text), examined allows one to discuss the extended C5 structure and the various folded conformations, namely the C7 (gamma-turn), C8, C10 (beta-turn), C11, and C13 conformations. The four latter forms may include cis peptide configurations. The oxy-analogs to the C7, C10, and C13 conformations and structures containing bifurcated hydrogen bonds are also discussed. The last sections describe intramolecularly hydrogen-bonded peptide structures involving: (1) a side-chain group, (2) the N-protecting group (in synthetic model compounds), and (3) a beta-amino acid.     

Analysis of the isomeric composition of the proline peptide bond in an angiotensin-converting enzyme inhibitor using capillary electrophoresis

The cis and trans isomeric composition of a proline peptide bond can be determined by routine free-solution capillary electrophoresis measurements provided that one isomeric form is preferentially stabilized by a dissociable ionic group. This capability is illustrated using the angiotensin converting enzyme (ACE) inhibitor (S)-1-N-[1-(ethoxycarbonyl)-3-phenylpropyl]-L-ala-L-pro, which has the trade name enalapril. Electropherograms indicate that the two isomeric forms of enalapril can be separated with baseline resolution at 15 degrees C using capillary buffers having pH values in the dissociation ranges of the enalapril carboxyl group, pK(cis) and pK(trans) of 2.6 and 3.1, and of the enalapril amine group, pK(cis) and pK(trans) of 5.9 and 5.6. Such baseline resolution indicates that the isomeric composition does not change during analysis, facilitating measurement of the isomer composition of a sample prior to its injection into the capillary. Thus the effect of pH, ionic strength, or an aprotic solvent on the isomeric composition of enalapril can be measured under uniform analytical conditions. The trans isomer composition changes from 68% in the cationic form, pH <2, to 50% in the isoelectric form, pH approximately 4.5, to 60% in the anionic form, pH >7. Addition of salt to the isoelectric form or addition of an aprotic solvent to any form prior to analysis increases the trans isomer composition. Similar analyses can be made using the alternative ACE inhibitors captopril and enalaprilat.     

Characterization of secondary amide peptide bond isomerization: thermodynamics and kinetics from 2D NMR spectroscopy

Secondary amide cis peptide bonds are of even lower abundance than the cis tertiary amide bonds of prolines, yet they are of biochemical importance. Using 2D NMR exchange spectroscopy (EXSY) we investigated the formation of cis peptide bonds in several oligopeptides: Ac-G-G-G-NH(2) , Ac-I-G-G-NH(2) , Ac-I-G-G-N-NH(2) and its cyclic form: I-G-G-N in dimethylsulfoxide (DMSO). From the NMR studies, using the amide protons as monitors, an occurrence of 0.13-0.23% of cis bonds was obtained at 296 K. The rate constants for the trans to cis conversion determined from 2D EXSY spectroscopy were 4-9 × 10(-3) s(-1) . Multiple minor conformations were detected for most peptide bonds. From their thermodynamic and kinetic properties the cis isomers are distinguished from minor trans isomers that appear because of an adjacent cis peptide bond. Solvent and sequence effects were investigated utilizing N-methylacetamide (NMA) and various peptides, which revealed a unique enthalpy profile in DMSO. The cyclization of a tetrapeptide resulted in greatly lowered cis populations and slower isomerization rates compared to its linear counterpart, further highlighting the impact of structural constraints.     

二聚体蝎钠通道毒素的1.4(A)分辨率晶体结构:反常非脯氨酸顺式肽键及其内在结构因素

报道了以二聚体存在的dimo-BmK M1的1．4A分辨率晶体结构．蛋白质中的肽键是局部双键,不可旋转,因此具有顺式（cis）和反式（trans）两种构型,它们不能通过旋转操作相互转换．非脯氨酸顺式肽键是指形成该肽键的氨基是由脯氨酸以外的氨基酸提供的（Xaa-nonPro）,这类肽键的顺式构型的自由能远比反式高,因此极少出现在天然蛋白质结构中．事实上,在长时间中,多肽链的“反式肽键连接”被视为蛋白质结构的一条基本规则,把顺式肽键视为不可能．随着高分辨率精确蛋白质结构数量的增加,近年来有详细的统计分析揭示,非脯氨酸顺式肽键（Xaa-nPro）在蛋白质结构中出现的几率为0．03％～0．05％,而且大多存在于功能敏感的结构区域,可能具有重要意义．但由于所用的基本结构数据都来自晶体结构,对这种反常肽键是否由结晶环境影响而形成,存在疑问．此前曾在以单体形式存在的蝎神经毒素mono-BmK M1的高分辨率结构中发现其中肽键Pr09-His10是非脯氨酸顺式肽键,并详细分析了其结构．功能意义．以二聚体存在的dimo-BmK M1的1．4A分辨率晶体结构表明,它与mono．BmK M1有不同的空间群、不同的分子堆积方式,不同的晶体环境．结构模型被高度精化,Rcryst达到0．109．dimo-BmK M1结构显示,在不对称单位中的两个M1分子在同一位置（残基9．10之间）都清晰地存在顺式肽键．立体化学分析显示,这一肽键的几何参数和局部结构与mono．BmK M1中的（9．10）顺式肽键基本相同．这一结果表明,非脯氨酸顺式肽键9．10的存在与结晶环境无关,是BmK M1分子的固有结构特征．在此基础上,综合分析了与顺式、反式肽键相关的结构元素,发现与残基（8．19）序列模体-KPXNC-（X为任意氨基酸）所决定的特征回折结构可能是分子内在的主要结构因素,其中第8位残基是Lys或Asp对决定肽键是顺式还是反式有关键作用．近来的突变实验及其晶体结构测定已证实,Lys8／Asp8是（9-10）肽键顺式／反式异构的结构开关,它们对该类分子与不同种属钠通道作用的专一选择性具有重要作用．通过BLAST搜索,发现在其他18个蛋白质中也存在相同的序列模体．KPXNC-,推测在这些蛋白质的相应肽键位置也可能存在反常的脯氨酸顺式肽键。     

磷酸化对多肽中Xaa-Pro片段肽脯酰胺键顺反异构的影响研究

多肽和蛋白质中Xaa-Pro片段肽脯酰胺键顺反异构对其构象与功能有重要影响.设计合成了一系列模型多肽及其磷酸化多肽,并采用核磁共振实验和分子动力学模拟的方法,研究了所合成多肽中肽脯酰胺键的顺反异构化.结果表明,对脯氨酸之前的Xaa残基进行侧链O-磷酸化会极大地影响该顺反异构化过程,进而调节肽链构象.此外,磷酸化使得多肽顺式构象比例增加,且当磷酸基团不带负电荷时顺式构象所占比例最大.同时,分子动力学模拟所得结果与核磁共振实验相一致,包括最稳定构象和顺反构象统计分布.磷酸基团所带电荷及其空间位阻可能是影响这类磷酸化多肽构象变化的主要因素.     

Analysis of side-chain conformational distributions in neutrophil peptide-5 NMR structures

The side-chain conformations have been analyzed in the antimicrobial peptide, Neutrophil Peptide-5 (NP-5), whose structure was independently generated from nmr-derived distance constraints using a distance geometry algorithm. The side-chain and peptide dihedral angle distributions in the nmr structures were compared with those constructed from a data base of high-resolution protein crystal structures. The side-chain conformational preferences for NP-5 in solution are significantly different from those observed in the crystal structure data base. These results indicate that the side-chain conformations are quite disordered for many of the residues of NP-5. The absence of a correlation between the width of the conformational distribution and surface accessibility suggests that the disorder may be due to limitations in the structural information extracted from the nmr data rather than to molecular motion. However, it is also observed that the degree of conformational disorder is only weakly correlated with the number of nuclear Overhauser enhancements to a given side chain. Possible reasons for this are discussed. Molecular mechanics refinement of these structures did not significantly change the side-chain populations. Anomolously wide distributions are observed for rotations about the peptide bonds and the disulfide bonds in the NP-5 distance geometry structures, which are improved by the refinement. The very high degree of order observed for the central dihedral angle of the disulfide bond in the high-resolution crystal data base suggests that the rotation about this bond in proteins is determined by the local potential.     

NMR analysis of cleaved Escherichia coli thioredoxin (1-73/74-108) and its P76A variant: cis/trans peptide isomerization

Inspection of high resolution three-dimensional (3D) structures from the protein database reveals an increasing number of cis-Xaa-Pro and cis-Xaa-Yaa peptide bonds. However, we are still far from being able to predict whether these bonds will remain cis upon single-site substitution of Pro or Yaa and/or cleavage of a peptide bond close to it in the sequence. We have chosen oxidized Escherichia coli thioredoxin (Trx), a member of the Trx superfamily with a single alpha/beta domain and cis P76 to determine the effect of single-site substitution and/or cleavage on this isomer. Standard two-dimensional (2D) NMR analysis were performed on cleaved Trx (1-73/74-108) and its P76A variant. Analysis of the NOE connectivities indicates remarkable similarity between the secondary and supersecondary structure of the noncovalent complexes and Trx. Analysis of the 2D version of the HCCH-TOCSY and HMQC-NOESY-HMQC and 13C-filtered HMQC-NOESY spectra of cleaved Trx with uniformly 13C-labeled 175 and P76 shows surprising conservation of both cis P76 and packing of 175 against W31. A similar NMR analysis of its P76A variant provides no evidence for cis A76 and shows only subtle local changes in both the packing of 175 and the interstrand connectivities between its most protected hydrophobic strands (beta2 and beta4). Indeed, a molecular simulation model for the trans P76A variant of Trx shows only subtle local changes around the substitution site. In conclusion, cleavage of R73 is insufficient to provoke cis/trans isomerization of P76, but cleavage and single-site substitution (P76A) favors the trans isomer.     

Enzyme:substrate hydrogen bond shortening during the acylation phase of serine protease catalysis

Atomic resolution (相似文献   

Stress and strain in staphylococcal nuclease.

Protein molecules generally adopt a tertiary structure in which all backbone and side chain conformations are arranged in local energy minima; however, in several well-refined protein structures examples of locally strained geometries, such as cis peptide bonds, have been observed. Staphylococcal nuclease A contains a single cis peptide bond between residues Lys 116 and Pro 117 within a type VIa beta-turn. Alternative native folded forms of nuclease A have been detected by NMR spectroscopy and attributed to a mixture of cis and trans isomers at the Lys 116-Pro 117 peptide bond. Analyses of nuclease variants K116G and K116A by NMR spectroscopy and X-ray crystallography are reported herein. The structure of K116A is indistinguishable from that of nuclease A, including a cis 116-117 peptide bond (92% populated in solution). The overall fold of K116G is also indistinguishable from nuclease A except in the region of the substitution (residues 112-117), which contains a predominantly trans Gly 116-Pro 117 peptide bond (80% populated in solution). Both Lys and Ala would be prohibited from adopting the backbone conformation of Gly 116 due to steric clashes between the beta-carbon and the surrounding residues. One explanation for these results is that the position of the ends of the residue 112-117 loop only allow trans conformations where the local backbone interactions associated with the phi and psi torsion angles are strained. When the 116-117 peptide bond is cis, less strained backbone conformations are available. Thus the relaxation of the backbone strain intrinsic to the trans conformation compensates for the energetically unfavorable cis X-Pro peptide bond. With the removal of the side chain from residue 116 (K116G), the backbone strain of the trans conformation is reduced to the point that the conformation associated with the cis peptide bond is no longer favorable.     

Effects of various numbers and positions of cis double bonds in the sn-2 acyl chain of phosphatidylethanolamine on the chain-melting temperature

In an attempt to investigate systematically the effects of various single and multiple cis carbon-carbon double bonds in the sn-2 acyl chains of natural phospholipids on membrane properties, we have de novo synthesized unsaturated C20 fatty acids comprised of single or multiple methylene-interrupted cis double bonds. Subsequently, 15 molecular species of phosphatidylethanolamine (PE) with sn-1 C20-saturated and sn-2 C20-unsaturated acyl chains were semi-synthesized by acylation of C20-lysophosphatidylcholine with unsaturated C20 fatty acids followed by phospholipase D-catalyzed base-exchange reaction in the presence of excess ethanolamine. The gel-to-liquid crystalline phase transitions of these 15 mixed-chain PE, in excess H2O, were investigated by high resolution differential scanning calorimetry. In addition, the energy-minimized structures of these sn-1 C20-saturated/sn-2 C20-unsaturated PE were simulated by molecular mechanics calculations. It is shown that the successive introduction of cis double bonds into the sn-2 acyl chain of C(20):C(20)PE can affect the gel-to-liquid crystalline phase transition temperature, Tm, of the lipid bilayer in some characteristic ways; moreover, the effect depends critically on the position of cis double bonds in the sn-2 acyl chain. Specifically, we have constructed a novel Tm diagram for the 15 species of unsaturated PE, from which the effects of the number and the position of cis double bonds on Tm can be examined simultaneously in a simple, direct, and unifying manner. Interestingly, the characteristic Tm profiles exhibited by different series of mixed-chain PE with increasing degree of unsaturation can be interpreted in terms of structural changes associated with acyl chain unsaturation.     

Database of non-canonical base pairs found in known RNA structures

Atomic resolution RNA structures are being published at an increasing rate. It is common to find a modest number of non-canonical base pairs in these structures in addition to the usual Watson-Crick pairs. This database summarizes the occurrence of these rare base pairs in accordance with standard nomenclature. The database, http://prion.bchs.uh.edu/, contains information such as sequence context, sugar pucker conformation, anti / syn base conformations, chemical shift, p K (a)values, melting temperature and free energy. Of the 29 anticipated pairs with two or more hydrogen bonds, 20 have been encountered to date. In addition, four unexpected pairs with two hydrogen bonds have been reported bringing the total to 24. Single hydrogen bond versions of five of the expected geometries have been encountered among the single hydrogen bond interactions. In addition, 18 different types of base triplets have been encountered, each of which involves three to six hydrogen bonds. The vast majority of the rare base pairs are antiparallel with the bases in the anti configuration relative to the ribose. The most common are the GU wobble, the Sheared GA pair, the Reverse Hoogsteen pair and the GA imino pair.     

Conformation of the 18-23 loop region of bovine prothrombin in the absence and presence of a model Ca2+ ion. An energy minimization study

The conformation of the cyclic peptide Ac-Cys-Leu-Gla-Gla-Pro-Cys-NHMe, representing the 18-23 disulfide loop of bovine prothrombin, was studied by energy minimization with the ECEPP (Empirical Conformational Energy Program for Peptides) algorithm. Parameters for charge and geometry for the gamma-carboxyglutamic acid (Gla) residue were obtained for inclusion in the ECEPP data set. Construction of the 18-23 cyclic peptide, for which no crystal structure is available, was carried out by using a scheme that took advantage of the constraints imposed by the requirement of disulfide ring closure and utilized known low-energy structures of single residues and dipeptides. Both cis and trans isomers about the Gla 21-Pro 22 peptide bond were considered. The lowest-energy conformation found for the isolated 18-23 cyclic peptide with arbitrary reduction of the charge on the Gla residues (to simulate hydration roughly) is a trans form, differing in energy by 11 kcal-mol-1 from the lowest-energy cis form. However, when the energy calculation includes one model Ca2+ ion, X2+, introduced at a fixed distance of 2.3 A from a single oxygen atom of either of the side-chain carboxyl groups of Gla with the C delta-O-X2+ bond angle fixed at one of three values, the lowest-energy cis conformation is about 1 kcal-mol-1 lower in energy than the lowest-energy trans conformation; i.e. the two structures have similar energies. In these structures, four oxygen atoms, two from each Gla side-chain, approach the model Ca2+ ion closely, in a manner similar to that seen in crystals of calcium alpha-ethylmalonate (Zell, A., Einspahr, H. & Bugg, C.E. (1985) Biochemistry 24, 533-537). It appears that the binding of Ca2+ to the 18-23 cyclic peptide may alter the equilibrium between cis and trans structures such that the fraction of cis isomers is greater in the presence of Ca2+.     

Crystal structures of two alpha-like scorpion toxins: non-proline cis peptide bonds and implications for new binding site selectivity on the sodium channel.

The crystal structures of two group III alpha-like toxins from the scorpion Buthus martensii Karsch, BmK M1 and BmK M4, were determined at 1.7 A and 1.3 A resolution and refined to R factors of 0.169 and 0.166, respectively. The first high-resolution structures of the alpha-like scorpion toxin show some striking features compared with structures of the "classical" alpha-toxin. Firstly, a non-proline cis peptide bond between residues 9 and 10 unusually occurs in the five-member reverse turn 8-12. Secondly, the cis peptide 9-10 mediates the spatial relationship between the turn 8-12 and the C-terminal stretch 58-64 through a pair of main-chain hydrogen bonds between residues 10 and 64 to form a unique tertiary arrangement which features the special orientation of the terminal residues 62-64. Finally, in consequence of the peculiar orientation of the C-terminal residues, the functional groups of Arg58, which are crucial for the toxin-receptor interaction, are exposed and accessible in BmK M1 and M4 rather than buried as in the classical alpha-toxins. Sequence alignment and characteristics analysis suggested that the above structural features observed in BmK M1 and M4 occur in all group III alpha-like toxins. Recently, some group III alpha-like toxins were demonstrated to occupy a receptor site different from the classical alpha-toxin. Therefore, the distinct structural features of BmK M1 and M4 presented here may provide the structural basis for the newly recognized toxin-receptor binding site selectivity. Besides, the non-proline cis peptide bonds found in these two structures play a role in the formation of the structural characteristics and in keeping accurate positions of the functionally crucial residues. This manifested a way to achieve high levels of molecular specificity and atomic precision through the strained backbone geometry.     

Identification of the aspartimide structure in a previously-reported peptide

The octapeptide Leu-Ser-Arg-Leu-Phe-Asp-Asn-Ala (hGH 6-13) has been reported to show insulin-potentiating properties, and its synthesis by conventional solid-phase synthesis was previously described. It is now shown that peptide synthesized with diisopropylethylamine or N-methylmorpholine as neutralizing base in each cycle does have the above structure. When triethylamine was used as neutralizing base however, the Asp residue was converted to its imide, the presence of which has been demonstrated by means of infrared, 1H-NMR and fast-atom bombardment mass spectra, and by reactivity studies, electrophoresis at several pH values, and enzymic hydrolysis. Only the imide form of the peptide possesses the previously reported biological properties. A study of imide formation from protected and unprotected peptides showed that cyclization occurred during a wide range of acid and base treatments, but 10% triethylamine in CH2Cl2 was most effective, producing over 40% of imide in 90 min. The results of the investigation are compared with others in the literature, including those for the peptide hormone secretin.