Utility of thiol-cross-linked fluorescent dye labeled terminators for DNA sequencing

Dipivaloyl-5-carboxyfluorescein N-hydroxysuccinimidyl ester 1 and 5-propargylamino-2',3'-dideoxyuridine triphosphate 5 were modified with maleimide, haloacetamide, and sulfhydryl reactive functional groups to participate in cross-conjugation reactions via sulfide bonds to generate fluorescently labeled, thioether cross-conjugated terminators 10 and 11. Their DNA sequencing potential was compared with an amide cross-conjugated terminator 13, synthesized by directly coupling 5-carboxyfluorescein NHS ester with 18-ddUTP 9. These terminators (10, 11, and 13) in combination with the Thermo Sequenase II DNA polymerase, in thermal cycle sequencing experiments, revealed that the thioether cross-conjugated terminator 10 and amide cross-conjugated terminator 13 served as good terminating substrates, generating satisfactory single-color gel images and electropherograms, while the other thioether cross-conjugated and maleimide derived one 11 underwent unexpected pH and temperature induced decomposition without showing fluorescent signatures for incorporation.     

Two-step cycle sequencing improves base ambiguities and signal dropouts in DNA sequencing reactions using energy-transfer-based fluorescent Dye terminators

The use of automated fluorescent DNA sequencer systems and PCR-based DNA sequencing methods plays an important role in the actual effort to improve the efficiency of large-scale DNA analysis. While dideoxy-terminators labeled with energy-transfer dyes (BigDyes) provide the most versatile method of automated DNA sequencing, premature terminations result in a substantially reduced reading length of the DNA sequence. Premature terminations are usually evidenced by base ambiguities and are often accompanied by diminished signal intensity from that point on in the sequence. I studied a two-step protocol for Taq cycle sequencing using the ABI BigDye terminator for reducing premature terminations in DNA sequences. I demonstrate that combining the annealing step with the extension step at one temperature (60°C) reduces premature terminations in DNA sequences that regularly contain premature terminations when the three temperature steps are used. This modification significantly increases the number of accurately read bases in DNA sequences.     

A new cleavable reagent for cross-linking and reversible immobilization of proteins.

We have prepared a new bifunctional reagent for the cross-linking and reversible immobilization of proteins through their amine groups. This compound, ethylene glycolyl bis(succinimidyl succinate), reacts rapidly with proteins, at pH 7 and at high dilution. The resulting protein cross-links are readily cleaved at pH 8.5 using hydroxylamine for 3–6 hr. at 37°C. Substantial enzymatic activity was observed with lactic dehydrogenase after such reversible cross-linking. Trypsin immobilized on agarose using this reagent retains full specific activity, is stable for weeks in the cold, and may be released with hydroxylamine at 25°C. This compound appears suitable for studies involving proteins with essential disulfide linkages.     

Fluorescence resonance energy transfer dye nucleotide terminators: a new synthetic approach for high-throughout DNA sequencing

Fluorescence resonance energy transfer (FRET) based dye-nucleotide terminators (10-13) were designed, synthesized, and formulated with Thermo Sequenase II DNA polymerase into a robust kit for high throughput DNA sequencing. The key energy transfer (ET) rigid and linear linker (2), required for the syntheses of energy transfer cassettes (6-9) was synthesized via Heck coupling reaction on t-Boc-L-4-iodo-phenylalanine (1) with N-TFA-propargylamine.     

Design and synthesis of cleavable biotinylated dideoxynucleotides for DNA sequencing by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Knowledge of the anti-drug antibody (ADA) status is necessary in early research studies. Because specific assay materials are sparse and time is pressing, a generic assay format with drug tolerance for detection of ADAs in serum samples from mice exposed to immunoglobulin G (IgG) or antigen-binding fragments (Fabs) is highly desirable. This article describes a generic immune complex assay in the sandwich enzyme-linked immunosorbent assay (ELISA) format based on (i) transformation of free ADAs to immune complexes by preincubation with excess drug, (ii) the use of a murine anti-human Fab constant domain Fab as capture reagent, (iii) detection of the immune complexes by a peroxidase-labeled rabbit anti-murine Fc antibody, and (iv) ADA-positive control conjugates consisting of human Fab and murine IgG. Results of the experiments suggest that the generic immune complex assay for mouse serum samples was at least equivalent to specific ADA immune assays and even superior regarding drug tolerance. The generic immune complex assay confers versatility as it detects ADAs in complex with full-length IgG as well as with Fabs independent of the target specificity in mouse serum samples. These features help to save the sparse amounts of specific antibodies available in early research and development and speed up drug candidate selection.     

A simple system of cloning in phage M13 and DNA sequencing with terminators

A compilation of techniques for DNA cloning in filamentous phage M13 based vectors for a novice in cloning is presented. It does not require either specialized microbiological facilities, or any specific knowledge in Escherichia coli genetics. The cloning strategy uses only blunt-end ligation into a vector that has been prepared once for several hundred experiments. The first part describes the isolation, preparation and checking of a blunt-ended M13 vector (with M13 mp series vectors as an example), and also the isolation of clonable fragments, transformation of competent cells and preliminary analysis of recombinants. The second part describes procedures and equipment, which enable to sequence recombinant M13 clones by the chain termination procedure of Sanger et al. It includes simplified procedures for the preparation of sequencing gels, and the rules of interpretation of the sequencing ladders. Reference material is added, which includes trouble-shooting guide, E. coli K12 strain list and polylinker sequences for use of mp-series vectors as well as a fully documented cloning and sequencing experiment.     

Automated sequencing and mapping of cosmid DNA with fluorescently-labeled dideoxynucleotide terminators.

We have established a method for directly sequencing cosmid DNA on an automated DNA sequencer. The major advantage of this method is that only small amounts of cosmid template DNA are needed for the sequencing reactions.     

A cost-effective plasmid purification protocol suitable for fluorescent automated DNA sequencing

A cost-effective, reliable, and reproducible method has been developed to produce good-quality, double-stranded plasmid DNA for automated sequence analysis. The method incorporates modifications to a previously described plasmid-purification protocol used in manual sequencing. The quality of the DNA produced from the present protocol is suitable for automated fluorescent sequencing. Using a dye-terminator sequencing protocol, most runs using plasmid DNA prepared using this protocol produced over 700 bases with greater than 99% base-calling accuracy.     

A new class of potent reversible inhibitors of metallo-proteinases: C-terminal thiol-peptides as zinc-coordinating ligands

A number of substrate analogous peptides containing a phosphoramidate, phosphonate ester, hydroxamate, carboxylate or sulfhydryl group are known to be inhibitors of thermolysin and other metalloproteinases. According to the specificity, most of the inhibitors mimic the prime site of the active center. Hitherto, peptidyl derivatives with a thiol group at the C-terminus have not been described. We have synthesized the protected cysteamides Ac-Ala-Ala-CA-SH and Z-Aa1-Aa2-CA-SH (Aa1: Ala, Pro; Aa2: Ala, Leu). The binding of these thiol peptide inhibitors to the metalloproteinases is characterized first by the coordination of the thiolate group of the inhibitor to the catalytic zinc ion and second by the subsite interaction of the peptide ligand in the active site of the enzyme. All peptide derivatives were competitive inhibitors of the zinc metalloproteinase thermolysin. The strongest inhibition was found with Z-Pro-Leu-CA-SH (Ki = 30 microM). Substitution of the N-protecting benzyloxycarbonyl residue towards the acetyl group in the peptide inhibitor, the inhibition constant decreased about 25 times.     

A new method of sequencing DNA

An entirely new method of sequencing DNA has been devised that does not use electrophoresis, radioactivity, or fluorescence. The method works by measuring pyrophosphate generated by the DNA polymerization reaction. DNA and DNA polymerase are held by a DEAE-Sepharose column and solutions containing different dNTPs are pumped through. The pyrophosphate generated is measured continuously by a device consisting of a series of columns containing enzymes covalently attached to Sepharose. The alternating copolymer poly(dA.dT) is sequenced as an illustration of the method. Future improvements that will facilitate automation are discussed.     

A new class of reversible cell cycle inhibitors

The effects of three compounds on the cell cycle of HL-60 promyeloid leukemia cells has been examined. Ciclopirox olamine, an antifungal agent, and the compound Hoechst 768159 reversibly block the cell cycle at a point occurring roughly 1 h before the arrest mediated by aphidicolin, an inhibitor of DNA polymerase alpha activity, which acts in early S phase. Similar results are also obtained with the compound mimosine, a plant amino acid. Based on these data, it is concluded that all three agents inhibit cell cycle traverse at or very near the G1/S phase boundary and identify a previously undefined reversible cell cycle arrest point.     

Development of an automated procedure for fluorescent DNA sequencing

We describe here the development of a procedure for complete automation of the dideoxynucleotide DNA sequencing chemistry using fluorescent dye-labeled oligonucleotide primers. This procedure combines rapid preparation of template DNA using a modification of the polymerase chain reaction, automation of the DNA sequencing reactions using a robotic laboratory workstation, and subsequent analysis of the fluorescent-labeled reaction products on a commercial automated fluorescent sequencer. Using this procedure, we were able to produce sufficient quantities of template DNA directly from bacterial colonies or bacteriophage plaques, perform the DNA sequencing reactions on these templates, and load the reaction products on the fluorescent DNA sequencer in a single work day. This scheme for automation of the fluorescent DNA sequencing method allows the fluorescent sequencer to be run at its full capacity every day and eliminates much of the labor required to obtain a high level of data output. Currently, we are able to perform and analyze 16 fluorescent-labeled reactions every day, with an average output of over 7000 bp per sequencer run.     

Rapid incorporation kinetics and improved fidelity of a novel class of 3'-OH unblocked reversible terminators

Recent developments of unique nucleotide probes have expanded our understanding of DNA polymerase function, providing many benefits to techniques involving next-generation sequencing (NGS) technologies. The cyclic reversible termination (CRT) method depends on efficient base-selective incorporation of reversible terminators by DNA polymerases. Most terminators are designed with 3′-O-blocking groups but are incorporated with low efficiency and fidelity. We have developed a novel class of 3′-OH unblocked nucleotides, called Lightning Terminators™, which have a terminating 2-nitrobenzyl moiety attached to hydroxymethylated nucleobases. A key structural feature of this photocleavable group displays a ‘molecular tuning’ effect with respect to single-base termination and improved nucleotide fidelity. Using Therminator™ DNA polymerase, we demonstrate that these 3′-OH unblocked terminators exhibit superior enzymatic performance compared to two other reversible terminators, 3′-O-amino-TTP and 3′-O-azidomethyl-TTP. Lightning Terminators™ show maximum incorporation rates (k_pol) that range from 35 to 45 nt/s, comparable to the fastest NGS chemistries, yet with catalytic efficiencies (k_pol/K_D) comparable to natural nucleotides. Pre-steady-state kinetic studies of thymidine analogs revealed that the major determinant for improved nucleotide selectivity is a significant reduction in k_pol by >1000-fold over TTP misincorporation. These studies highlight the importance of structure–function relationships of modified nucleotides in dictating polymerase performance.     

The fluoride cleavable 2-(cyanoethoxy)methyl (CEM) group as reversible 3'-O-terminator for DNA sequencing-by-synthesis - synthesis, incorporation, and cleavage

A new and promising sequencing technology called sequencing-by-synthesis (SBS) enables fast determination of DNA sequences. 2'-Deoxynucleotides containing the (2-cyanoethoxy)methyl (CEM) group at the 3'-O-position are potential reversible terminators for the SBS technology. Herein we describe the synthesis, the incorporation by several polymerases, and the cleavage of this 3'-O-blocking group using 3'-O-CEM-thymidinyl-5'-O-triphosphate 7 as an example.     

Abasic template lesions are strong chain terminators for DNA primase but not for DNA polymerase alpha during the synthesis of new DNA strands.

The effects of abasic lesions on both primase activity and DNA polymerase alpha- (pol alpha) catalyzed elongation of primase-synthesized primers were examined. Abasic lesions were strong chain terminators during primer synthesis by primase. However, extension of primase-synthesized primers by pol alpha resulted in 60-93% bypass of abasic lesions. Sequencing of bypass products generated during this primase-coupled pol alpha activity showed that dAMP was preferentially incorporated opposite the abasic lesion, indicating that pol alpha was responsible for bypass. In contrast, previous analyses of pol alpha-catalyzed elongation of exogenously supplied DNA primer-templates showed that abasic lesions strongly terminated DNA synthesis. Thus, elongation of primase-synthesized primers by pol alpha-primase is fundamentally different than elongation of exogenously added primer-templates with respect to interaction with abasic lesions. Furthermore, this high level of abasic lesion bypass during primase-coupled pol alpha activity provides an additional mechanism for how translesional synthesis may occur in vivo, an event hypothesized to be mutagenic.     

Identification and characterization of new DNA replication terminators in Bacillus subtilis

A functional DNA replication terminator of Bacillus subtilis contains two overlapping binding sites, A and B, for the replication terminator protein (RTP). A degenerate 17-mer oligonucleotide corresponding to the consensus B site has been used to detect four new terminators in the B. subtilis chromosome, in addition to the previously identified and closely spaced IRI and IRII. All the new terminators lie in the terminus region of the chromosome, on both sides of IRI and IRII, with their positions spanning <1O% of its length. Their DNA sequences are characterized by clearly identifiable A- and B-binding sites. They bind RTP in a manner indistinguishable from IRI, although precise affinities have not been compared. Each new terminator is functional in causing fork arrest when present in a plasmid replicating in B. subtilis . Three of the four were tested for polarity in fork-arrest activity and exhibited the polarity expected. The total of six terminators now identified in B. subtilis have been named TerI-TerVI . TerI and TerII correspond to the previously identified IRI and IRII, respectively. The chromosomal orientations of all but one of the terminators ( TerIV ) have been established and they conform to an arrangement similar to that in Escherichia coli in which two opposed groups of polar terminators provide a replication-fork trap ensuring that the approaching forks meet within a restricted region of the chromosome. The development of a strikingly similar arrangement of terminators in the two organisms, despite the lack of any detectable similarity in their respective DNA terminators and terminator proteins, emphasizes the importance of the replication-fork trap in each case.     

Thiolytically cleavable dithiobenzyl urethane-linked polymer-protein conjugates as macromolecular prodrugs: reversible PEGylation of proteins

New thiolytically cleavable dithiobenzyl (DTB) urethane-linked conjugates of methoxypoly(ethylene glycol) (mPEG) and a model protein, lysozyme, were prepared and thoroughly characterized. In contrast to our earlier communication [Zalipsky, et al. (1999) Bioconjugate Chem. 10, 703], in the current study we used a more sterically hindered form of para-DTB urethane linkage containing a methyl group on the alpha-carbon to the disulfide moiety. The new reagent for covalent attachment of mPEG-DTB to amino groups of proteins was synthesized via a seven-step process. As a result of PEG conjugation, the lysozyme was shown to completely lose its bacterial cell wall-lysing activity. However, activity was almost fully restored upon cysteine-mediated cleavage of the PEG component. The conjugate decomposition process was monitored by RP-HPLC and by ion spray LC-MS, which showed the formation of the p-mercaptobenzyl urethane-lysozyme intermediate, and ultimately its conversion to the unmodified lysozyme as the sole protein component. Pharmacokinetic evaluation of (125)I-labeled cleavable and noncleavable PEG-lysozyme given intravenously in rats revealed similar clearance patterns; both cleared in a significantly slower manner compared to that of the native protein. However, subcutaneous administration of the same conjugates showed a significantly larger AUC of the cleavable conjugate, indicating that some cleavage of the DTB urethane may have occurred. Although the DTB-linked PEG-lysozyme exhibited almost the same plasma clearance as the noncleavable counterpart, hinting that methyl-DTB linkage might be stable in the bloodstream, SDS-PAGE examination of the conjugate incubated in plasma showed decomposition at least partially mediated by albumin. These results suggest the potential of PEG-DTB-proteins as macromolecular prodrugs capable of generating fully active native proteins under in vivo conditions.     

A general synthesis of specifically deuterated nucleotides for studies of DNA and RNA

An efficient procedure is described for the preparation of ribonucleotides and deoxyribonucleotides with deuterium incorporated at the 1', 4', or 5' position. Three intermediates-[1-2H]-D-ribose, [4-2H]-D-ribose, and [5-2H(2)]-D-ribose-were prepared by chemical synthesis and subsequently converted to ribonucleotides and deoxyribonucleotides via enzymatic reactions. Milligram quantities of the desired products were obtained with an average deuterium content of 96+/-1%.     

Estradiol dimers as a new class of steroid sulfatase reversible inhibitors

A series of estradiol dimers was synthesized or selected from compounds available in our laboratory and tested for inhibition against steroid sulfatase. Dimers linked by their C17 position, compounds 7 and 8, showed inhibitory potency similar (56% and 54% at 1 μM) to that of our best previously reported reversible inhibitor EM-690 (62% at 1 μM). Docking experiment seems to indicate that C17–C17 dimers bind in a similar way to EM-690 whereas C16–O3 and C16–C16 dimers bind in an upside-down position.