Adsorption kinetics of a basic dye from aqueous solutions onto apricot stone activated carbon

The preparation of activated carbon from apricot stone with H₂SO₄ activation and its ability to remove a basic dye, astrazon yellow 7GL, from aqueous solutions were reported in this study. The adsorbent was characterized by FTIR, BET and SEM, respectively. The effects of various experimental parameters, such as initial dye concentration, pH, adsorbent dosage and temperature were investigated in a batch-adsorption technique. The optimum conditions for removal of the basic dye were found to be pH 10, 6 g/l of adsorbent dosage and equilibrium time of 35 min, respectively. A comparison of three kinetic models, the pseudo first-order, second-order and diffusion controlled kinetic models, on the basic dye-adsorbent system showed that the removal rate was heavily dependent on diffusion controlled kinetic models. The adsorption isotherm data were fitted well to Langmuir and Freundlich isotherms. The adsorption capacity was calculated as 221.23 mg/g at 50 °C. Thermodynamics parameters were also evaluated. The values of enthalpy and entropy were 49.87 kJ/mol and 31.93 J/mol K, respectively, indicating that this process was spontaneous and endothermic. The experimental studies were indicated that ASC had the potential to act as an alternative adsorbent to remove the basic dye from aqueous solutions.     

Adsorption of dissolved Reactive red dye from aqueous phase onto activated carbon prepared from agricultural waste

The adsorption of Reactive red dye (RR) onto Coconut tree flower carbon (CFC) and Jute fibre carbon (JFC) from aqueous solution was investigated. Adsorption studies were carried out at different initial dye concentrations, initial solution pH and adsorbent doses. The kinetic studies were also conducted; the adsorption of Reactive red onto CFC and JFC followed pseudosecond-order rate equation. The effective diffusion coefficient was evaluated to establish the film diffusion mechanism. Quantitative removal of Reactive red dye was achieved at strongly acidic conditions for both the carbons studied. The adsorption isotherm data were fitted well to Langmuir isotherm and the adsorption capacity were found to be 181.9 and 200 mg/g for CFC and JFC, respectively. The overall rate of dye adsorption appeared to be controlled by chemisorption, in this case in accordance with poor desorption studies.     

Removal of Cr(VI) from aqueous solution by adsorption onto activated carbon

Laboratory scale experiments were carried out to produce and characterise biofuel from tigernut (Cyperus esculentus) oil. Transesterification of tigernut oil afforded methyl and ethyl esters, which had fuel properties similar to common biofuels, hence tigernut could be utilised as an alternative renewable energy resource.     

壳聚糖钴与牛血清白蛋白相互作用的研究

采用紫外-可见吸收和荧光光谱,研究了壳聚糖钴与牛血清白蛋白(BSA)的相互作用。结果发现:随壳聚糖钴浓度的增加,BSA的紫外-可见吸收光谱表现增色效应和较小的蓝移;壳聚糖钴可以猝灭BSA的内源荧光,其猝灭机理属于静态猝灭。在室温下,壳聚糖钴与BSA的的结合常数KA为2.40×106。     

从反胶束溶液中反萃牛血清白蛋白的研究

由近红外光谱证实,十六烷基三甲基溴化铵(CTAB)/正己醇-正辛烷反胶束溶液是牛血清白蛋白(BSA)增溶于非极性有机溶剂的较理想中介。研究了反萃液酸度、离子强度和种类等参数对BSA反萃率的影响,过低的溶液酸度导致BSA变性。适宜的反萃液为:1.0～2.0mol/L KBr,pH4.3～4.9。蛋白质的紫外光谱表明,BSA分子在料液,反胶束溶液和反萃液中的构象大致相同。此外,探讨了反胶束溶液循环使用的效率问题。最后,通过采用适当的相比,成功地实现了蛋白质的回收和浓缩。     

Adsorption of fluorobenzene onto granular activated carbon: isotherm and bioavailability studies

The adsorption of a recalcitrant fluoroaromatic compound, fluorobenzene (FB), onto granular activated carbon (GAC) was evaluated. The respective isotherm was obtained and the Langmuir, Freundlich and Redlich-Peterson models were fitted to the experimental data, with the Redlich-Peterson model giving the best fitting. Freundlich model also provided a good fit but the Langmuir model could not adequately fit the experimental data, especially at high FB concentrations. Maximal adsorption capacity of FB onto GAC was found to be 388mg of FB per gram of GAC. The reversibility of the adsorption of FB onto GAC was investigated, both in the absence and presence of microorganisms. Abiotic desorption of FB occurred to a small extent (between 3% and 22%, for amounts of FB initially adsorbed to the GAC between 37 and 388mgg(-1)), and bioregeneration of GAC was shown to occur when the matrix was exposed to a FB degrading culture, with 58-80% of the adsorbed FB being biodegraded. A residual amount of FB showed not to be bioavailable, suggesting that part of the adsorbed FB may be irreversibly bound. The fraction of the non-bioavailable FB increased at higher amounts of adsorbed FB, from 19% to 33%. The results indicate that the GAC employed in this study has a good capacity to adsorb FB and that bioregeneration of this matrix is a feasible process.     

水溶性壳聚糖与牛血清白蛋白相互作用的研究

采用紫外和荧光光谱研究了水溶性壳聚糖(CS)与牛血清白蛋白(BSA)之间的相互作用。结果表明:随CS浓度的增加,BSA的紫外吸收光谱表现出明显的增色效应和较小的紫移;CS可以猝灭BSA的内源荧光,其猝灭机理是CS与BSA形成复合物的静态猝灭。并且测定了在不同温度下,该反应的结合常数KA分别为6.92×106(298 K),5.01×106(308 K),3.31×106(318 K),CS与BSA以摩尔比1∶1结合。同时采用同步荧光光谱法探讨了CS对BSA构象的影响。     

人和牛血清白蛋白的极谱测定

人或牛血清白蛋白溶液调至ｐＨ１０并在４℃左右放置３０ｈ,诱导出重复性良好的极谱峰。然后把试样溶液调至适当ｐＨ并记录极谱电流。在浓度低于１．０×１０－５ｍｏｌ／Ｌ时,峰电流对浓度作图是直线,试样浓度可从图上直接读出。对影响白蛋白测定的诸因素作了详细研究和讨论。结果对富含硫的蛋白质的极谱研究有参考价值。     

Effect of Air Plasma Processing on the Adsorption Behaviour of Bovine Serum Albumin on Spin-Coated PMMA Surfaces

This paper reports the adsorption of Bovine Serum Albumin （BSA） onto Dielectric Barrier Discharge （DBD） processed Poly（methyl methacrylate） （PMMA） surfaces by a Quartz Crystal Microbalance with Dissipation monitoring （QCM-D） technique. The purpose is to study the influence of DBD processing on the nature and scale of BSA adsorption on PMMA surface in vitro. It was observed that DBD processing improves the surface wettability of PMMA film, a fact attributable to the changes in surface chemistry and topography. Exposure of the PMMA to Phosphate Buffed Saline （PBS） solution in the QCM-D system resulted in surface adsorption which reaches an equilibrium after about 30 minutes for pristine PMMA, and 90 minutes for processed PMMA surface. Subsequent injection of BSA in PBS indicated that the protein is immediately adsorbed onto the PMMA surface. It was revealed that adsorption behaviour of BSA on pristine PMMA differs from that on processed PMMA surface. A slower adsorption kinetics was observed for pristine PMMA surface, whilst a quick adsorption kinetics for processed PMMA. Moreover, the dissipation shift of protein adsorption suggested that BSA forms a more rigid structure on pristine PMMA surface that on processed surface. These data suggest that changes in wettability and attendant chemical properties and surface texture of the PMMA surface may play a significant role in BSA adsorption process.     

Adsorption of humic acid from aqueous solution onto irradiation-crosslinked carboxymethylchitosan

This paper presents the adsorption of humic acid from aqueous solution onto crosslinked chitosan derivative (carboxymethylchitosan), formed by additionless irradiation technique. The surface charge and swelling properties of crosslinked samples were investigated. The adsorption of humic acid onto crosslinked carboxymethylchitosan was carried out by the batch method at room temperature, and it was found to be strongly pH-dependent. Maximum amount of humic acid was adsorbed under acidic conditions at the optimum pH value of 3.5. Adsorption kinetic studies indicated the adsorption process was transport-limited at the same pH. The adsorption isotherm analysis data under various initial humic acid concentrations confirms that experimental data fitted well into the Langmuir equation. X-ray photoelectron spectroscopy (XPS) revealed that the amino groups of carboxymethylated chitosan were protonated, suggesting the formation of organic complex between the protonated amino groups and humic acid. From these preliminary evaluations, it was concluded that crosslinked carboxymethylated chitosan derivatives have a great potential in water treatment for the removal of humic acid and other polarized or electrically charged species.     

Adsorption of chromium from aqueous solution by activated alumina and activated charcoal

Cr(VI) is considered to be potentially carcinogenic to humans. Removal of Cr(VI) ions from aqueous solution under different conditions was investigated using activated alumina (AA) and activated charcoal (AC) as adsorbents. Batch mode experiments were conducted to study the effects of adsorbent dose, contact time, pH, temperature and initial concentration of Cr(VI). Results showed that the adsorption of Cr(VI) depended significantly on pH and temperature. Equilibrium studies showed that Cr(VI) had a high affinity for AA at pH 4 and AC at pH 2. For AA, maximum adsorption was found at 25 degrees C, indicating exothermic adsorption, while for AC, maximum adsorption was at 40 degrees C. Freundlich and Langmuir adsorption isotherms were also applied and they showed good fits to the experimental data. The results suggest that both AA and AC could be used as effective adsorbents for the removal of Cr(VI) ions.     

The Interaction of New Pyridylporphyrins with Bovine Serum Albumin

The interaction of meso-tetra(4-N-hydroxyethylpyridyl)porphyrin, meso-tetra(3-N-hydroxyethylpyridyl)porphyrin, and their zinc complexes with bovine serum albumin (BSA) was studied by electronic spectroscopy, CD, and equilibrium dialysis at pH 7.2. The titration of the porphyrins with BSA was accompanied by a decrease in light absorption and a bathochromic shift of the Soret band, as well as by the appearance of an isobestic point. The porphyrin interaction with BSA also led to the induction of positive CD spectra in the visible region, which is explained by the porphyrin sorption on the protein globule. The equilibrium dialysis helped in determining the stoichiometry of binding and the binding constants of the porphyrins under study with BSA using Scatchard plots. This interaction is nonspecific and reversible.     

Stabilization of Colicin E2 by Bovine Serum Albumin

Colicin E2 was partially purified from Escherichia coli W3110. This preparation was remarkably stabilized by bovine serum albumin in a solution at neutral pH, as shown by dilution experiments and tests on heat stability of colicin. One killing unit of colicin E2 was estimated to correspond to one molecule of colicin E2, on the assumption of a molecular weight of 60,000.     

Adsorption of Neutral Red onto Mn-impregnated activated carbons prepared from Typha orientalis

Activated carbon was prepared from an inexpensive and renewable carbon source, Typha orientalis, by H(3)PO(4) activation and then impregnated with different Mn salts and tested for its Neutral Red (NR) adsorption capacities. The amount of Mn impregnated in the activated carbon was influenced by the anion species. Impregnation with Mn decreased the surface area, changed the pore size and crystal structure, and introduced more acidic functional groups such as carboxyl, lactone and phenol groups. The optimum adsorption performance for all the activated carbons was obtained at pH 3.7, Mn-Carbon dose of 0.100g/100ml solution and contact time 4.5h. The adsorption isotherms fit the Langmuir isotherm equation. The kinetic data followed the pseudo-second-order model. The thermodynamic parameters indicated that the processes were spontaneous and endothermic. According to these results, the prepared Mn modified activated carbons are promising adsorbents for the removal of Neutral Red from wastewater.     

Human Serum Protein Adsorption onto Synthesis Nano-Hydroxyapatite

Adsorption of human serum proteins (Albumin and total protein) onto high purity synthesis nano-hydroxyapatite (HA), Ca₁₀(PO₄)₆(OH)₂, has been studied in a wide temperature range by UV–visible spectrophotometer. Adsorption isotherm is basically important to describe how solutes interact with adsorbent, and is critical in optimizing the use of adsorbent. In the present study, the experimental results were fitted to the Langmuir, Freundlich, Temkin and Dubinin-Radushkevich (DR) models to obtain the characteristic parameters of each model and square of the correlation coefficients (R²). According to the results, the DR isotherm model had the best agreement with the experimental data. The effect of temperature on adsorption of human serum proteins (HSP) onto the synthesized nano-HA was studied. The experimental results indicated that temperature increase generally causes an increase in the adsorption of HSP onto the nano-HA. This is basically due to the effect of temperature on the HSP activity and its diffusion rate on HA surfaces.     

紫背天葵红色素与牛血清白蛋白的作用研究

以最优化条件从紫背天葵中提取出天然红色素,采用可见光谱研究了其与牛血清白蛋白（BSA）的相互作用。     

Kinetics of Thermal Denaturation and Aggregation of Bovine Serum Albumin

Thermal aggregation of bovine serum albumin (BSA) has been studied using dynamic light scattering, asymmetric flow field-flow fractionation and analytical ultracentrifugation. The studies were carried out at fixed temperatures (60°C, 65°C, 70°C and 80°C) in 0.1 M phosphate buffer, pH 7.0, at BSA concentration of 1 mg/ml. Thermal denaturation of the protein was studied by differential scanning calorimetry. Analysis of the experimental data shows that at 65°C the stage of protein unfolding and individual stages of protein aggregation are markedly separated in time. This circumstance allowed us to propose the following mechanism of thermal aggregation of BSA. Protein unfolding results in the formation of two forms of the non-native protein with different propensity to aggregation. One of the forms (highly reactive unfolded form, U_hr) is characterized by a high rate of aggregation. Aggregation of U_hr leads to the formation of primary aggregates with the hydrodynamic radius (R_h,1) of 10.3 nm. The second form (low reactive unfolded form, U_lr) participates in the aggregation process by its attachment to the primary aggregates produced by the U_hr form and possesses ability for self-aggregation with formation of stable small-sized aggregates (A_st). At complete exhaustion of U_lr, secondary aggregates with the hydrodynamic radius (R_h,2) of 12.8 nm are formed. At 60°C the rates of unfolding and aggregation are commensurate, at 70°C the rates of formation of the primary and secondary aggregates are commensurate, at 80°C the registration of the initial stages of aggregation is complicated by formation of large-sized aggregates.     

多西紫杉醇白蛋白微球的制备及优化实验研究

多西紫杉醇(DT)是唯一应用于临床治疗肿瘤的紫杉醇的衍生物,其水溶性差,制剂中需要加入有机溶剂和助溶剂,而有机溶剂和助溶剂具有刺激性。为减少多西紫杉醇制剂的刺激性,本实验通过去溶剂化—化学交联法制备水溶性多西紫杉醇白蛋白微球。对制备过程中的重要影响因素进行考察,并通过Design-expert软件进行数据优化,最终得优化条件:白蛋白浓度为35 mg.mL-1,DT浓度为1.03 mg.mL-1,乙醇和水的比例为3∶1,乙醇的滴加速度为0.73 mL.min-1,搅拌时间为12 h,0.2%戊二醛与白蛋白的交联比为2∶1。得到的多西紫杉醇白蛋白微球粒径为185 nm,载药量为14.4%,成功的解决了其水溶性,为接下来的动物实验、临床应用提供了良好的基础。     

槐定碱与牛血清白蛋白的相互作用研究

在模拟动物体生理条件下,用荧光猝灭、荧光偏振和紫外-可见吸收光谱法研究了槐定碱与牛血清白蛋白(BSA)结合作用。荧光猝灭数据显示,槐定碱与BSA发生反应生成了新的复合物,属于静态荧光猝灭。求出了不同温度(19、25、31、37℃)下槐定碱与BSA作用的结合常数分别为1.219×106,1.164×106,1.110×106和1.057×106L/mol,由van’tHoff方程式计算槐定碱与BSA反应的热力学参数:焓变ΔH和熵变ΔS值分别为-5.97kJ/mol和96.11J/(mol.K),表明槐定碱与BSA间的作用力以静电引力为主。以华法林和布洛芬(分别为siteI和siteII探针)为标记药物研究槐定碱在BSA上的结合位点,结果表明,槐定碱结合在BSA疏水空腔的siteI位点。     

Response Surface Methodology for Optimizing the Bovine Serum Albumin Fibrillation

Amyloid fibrils are considered as nanostructures that could be formed by ordered self-assembly of the partially-folded states of many different peptides or proteins. In this study, bovine serum albumin was used as a model protein whose ordered aggregation (fibrillation) was optimized. Response surface methodology (RSM) was used in a design that contained a total of 30 experimental trials. The first 24 were organized in a factorial design and from 25 to 30 involved the replications of the central points. Data obtained from RSM were subjected to the analysis of variance (ANOVA) and analyzed using a second order polynomial equation. Subsequent testing of the suggested experimental parameters was done in vitro with Congo red spectrophotometric assay. Protein concentration, pH, temperature and time of incubation were the variables used in this study. Responses were assessed by measuring absorbance in 540?nm (characteristic of amyloid formation) and maximal wavelength. Concomitant effects of variables were assessed in surface plots that each considered two of the variables. Interestingly, the pattern obtained by monitoring absorbance at 540?nm and absorbance in maximal wavelength were identical in most cases. We are reporting the optimum concentration of protein, pH, temperature and time at 5?mg?ml^?1, 3.02 and 72?°C and 48?h, respectively. Our findings suggest that use of Congo red spectrophotometric test, as a simple and affordable assay could be suggested as a first test for assessing fibril formation of proteins. Absorbance in maximal wavelength is recommended as a significant indication of fibril formation.