Highly Hydrolytic Reuteransucrase from Probiotic Lactobacillus reuteri Strain ATCC 55730

Lactobacillus reuteri strain ATCC 55730 (LB BIO) was isolated as a pure culture from a Reuteri tablet purchased from the BioGaia company. This probiotic strain produces a soluble glucan (reuteran), in which the majority of the linkages are of the α-(1→4) glucosidic type (~70%). This reuteran also contains α-(1→6)- linked glucosyl units and 4,6-disubstituted α-glucosyl units at the branching points. The LB BIO glucansucrase gene (gtfO) was cloned and expressed in Escherichia coli, and the GTFO enzyme was purified. The recombinant GTFO enzyme and the LB BIO culture supernatants synthesized identical glucan polymers with respect to linkage type and size distribution. GTFO thus is a reuteransucrase, responsible for synthesis of this reuteran polymer in LB BIO. The preference of GTFO for synthesizing α-(1→4) linkages is also evident from the oligosaccharides produced from sucrose with different acceptor substrates, e.g., isopanose from isomaltose. GTFO has a relatively high hydrolysis/transferase activity ratio. Complete conversion of 100 mM sucrose by GTFO nevertheless yielded large amounts of reuteran, although more than 50% of sucrose was converted into glucose. This is only the second example of the isolation and characterization of a reuteransucrase and its reuteran product, both found in different L. reuteri strains. GTFO synthesizes a reuteran with the highest amount of α-(1→4) linkages reported to date.     

Rational transformation of Lactobacillus reuteri 121 reuteransucrase into a dextransucrase

Glucansucrase or glucosyltransferase (GTF) enzymes of lactic acid bacteria display high sequence similarity but catalyze synthesis of different alpha-glucans (e.g., dextran, mutan, alternan, and reuteran) from sucrose. The variations in glucosidic linkage specificity observed in products of different glucansucrase enzymes appear to be based on relatively small differences in amino acid sequences in their sugar-binding acceptor subsites. This notion was derived from mutagenesis of amino acids of GTFA (reuteransucrase) from Lactobacillus reuteri strain 121 putatively involved in acceptor substrate binding. A triple amino acid mutation (N1134S:N1135E:S1136V) in a region immediately next to the catalytic Asp1133 (putative transition state stabilizing residue) converted GTFA from a mainly alpha-(1-->4) ( approximately 45%, reuteran) to a mainly alpha-(1-->6) ( approximately 80%, dextran) synthesizing enzyme. The subsequent introduction of mutation P1026V:I1029V, involving two residues located in a region next to the catalytic Asp1024 (nucleophile), resulted in synthesis of an alpha-glucan containing only a very small percentage of alpha-(1-->4) glucosidic linkages ( approximately 5%) and a further increased percentage of alpha-(1-->6) glucosidic linkages ( approximately 85%). This changed glucosidic linkage specificity was also observed in the oligosaccharide products synthesized by the different mutant GTFA enzymes from (iso)maltose and sucrose. Amino acids crucial for glucosidic linkage type specificity of reuteransucrase have been identified in this report. The data show that a combination of mutations in different regions of GTF enzymes influences the nature of both the glucan and oligosaccharide products. The amino acids involved most likely contribute to sugar-binding acceptor subsites in glucansucrase enzymes.     

Molecular characterization of a novel glucosyltransferase from Lactobacillus reuteri strain 121 synthesizing a unique,highly branched glucan with alpha-(1-->4) and alpha-(1-->6) glucosidic bonds

Lactobacillus reuteri strain 121 produces a unique, highly branched, soluble glucan in which the majority of the linkages are of the alpha-(1-->4) glucosidic type. The glucan also contains alpha-(1-->6)-linked glucosyl units and 4,6-disubstituted alpha-glucosyl units at the branching points. Using degenerate primers, based on the amino acid sequences of conserved regions from known glucosyltransferase (gtf) genes from lactic acid bacteria, the L. reuteri strain 121 glucosyltransferase gene (gtfA) was isolated. The gtfA open reading frame (ORF) was 5,343 bp, and it encodes a protein of 1,781 amino acids with a deduced M(r) of 198,637. The deduced amino acid sequence of GTFA revealed clear similarities with other glucosyltransferases. GTFA has a relatively large variable N-terminal domain (702 amino acids) with five unique repeats and a relatively short C-terminal domain (267 amino acids). The gtfA gene was expressed in Escherichia coli, yielding an active GTFA enzyme. With respect to binding type and size distribution, the recombinant GTFA enzyme and the L. reuteri strain 121 culture supernatants synthesized identical glucan polymers. Furthermore, the deduced amino acid sequence of the gtfA ORF and the N-terminal amino acid sequence of the glucosyltransferase isolated from culture supernatants of L. reuteri strain 121 were the same. GTFA is thus responsible for the synthesis of the unique glucan polymer in L. reuteri strain 121. This is the first report on the molecular characterization of a glucosyltransferase from a Lactobacillus strain.     

Role of asparagine 1134 in glucosidic bond and transglycosylation specificity of reuteransucrase from Lactobacillus reuteri 121

Glucansucrases from lactic acid bacteria convert sucrose into various alpha-glucans that differ greatly with respect to the glucosidic bonds present (e.g. dextran, mutan, alternan and reuteran). This study aimed to identify the structural features of the reuteransucrase from Lactobacillus reuteri 121 (GTFA) that determine its reaction specificity. We here report a detailed mutational analysis of a conserved region immediately next to the catalytic Asp1133 (putative transition-state stabilizing) residue in GTFA. The data show that Asn1134 is the main determinant of glucosidic bond product specificity in this reuteransucrase. Furthermore, mutations at this position greatly influenced the hydrolysis/transglycosylation ratio. Changes in this amino acid expands the range of glucan and gluco-oligosaccharide products synthesized from sucrose by mutant GTFA enzymes.     

Structural analysis of the alpha-D-glucan (EPS35-5) produced by the Lactobacillus reuteri strain 35-5 glucansucrase GTFA enzyme

The neutral exopolysaccharide EPS35-5 (reuteran) produced from sucrose by the glucansucrase GTFA enzyme from Lactobacillus reuteri 35-5 was found to be a (1-->4,1-->6)-alpha-D-glucan, with no repeating units present. Based on linkage analysis and 1D/2D 1H and 13C NMR spectroscopy of intact EPS35-5, as well as MS and NMR analysis of oligosaccharides obtained by partial acid hydrolysis and enzymatic hydrolysis, using pullulanase M1 (Klebsiella planticola), of EPS35-5, a composite model, that includes all identified structural elements, was formulated as follows: [Formula: see text].     

Characterization of a novel fructosyltransferase from Lactobacillus reuteri that synthesizes high-molecular-weight inulin and inulin oligosaccharides

Fructosyltransferase (FTF) enzymes produce fructose polymers (fructans) from sucrose. Here, we report the isolation and characterization of an FTF-encoding gene from Lactobacillus reuteri strain 121. A C-terminally truncated version of the ftf gene was successfully expressed in Escherichia coli. When incubated with sucrose, the purified recombinant FTF enzyme produced large amounts of fructo-oligosaccharides (FOS) with beta-(2-->1)-linked fructosyl units, plus a high-molecular-weight fructan polymer (>10(7)) with beta-(2-->1) linkages (an inulin). FOS, but not inulin, was found in supernatants of L. reuteri strain 121 cultures grown on medium containing sucrose. Bacterial inulin production has been reported for only Streptococcus mutans strains. FOS production has been reported for a few bacterial strains. This paper reports the first-time isolation and molecular characterization of (i) a Lactobacillus ftf gene, (ii) an inulosucrase associated with a generally regarded as safe bacterium, (iii) an FTF enzyme synthesizing both a high molecular weight inulin and FOS, and (iv) an FTF protein containing a cell wall-anchoring LPXTG motif. The biological relevance and potential health benefits of an inulosucrase associated with an L. reuteri strain remain to be established.     

Molecular dynamics simulations of a cyclic-beta-(1-->2) glucan containing an alpha-(1-->6) linkage as a 'molecular alleviator' for the macrocyclic conformational strain

The conformational preferences of a cyclic osmoregulated periplasmic glucan of Ralstonia solanacearum (OPGR), which is composed of 13 glucose units and linked entirely via beta-(1-->2) linkages excluding one alpha-(1-->6) linkage, were characterized by molecular dynamics simulations. Of the three force fields modified for carbohydrates that were applied to select a suitable one for the cyclic glucan, the carbohydrate solution force field (CSFF) was found to most accurately simulate the cyclic molecule. To determine the conformational characteristics of OPGR, we investigated the glycosidic dihedral angle distribution, fluctuation, and the potential energy of the glucan and constructed hypothetical cyclic (CYS13) and linear (LINEAR) glucans. All beta-(1-->2)-glycosidic linkages of OPGR adopted stable conformations, and the dihedral angles fluctuated in this energy region with some flexibility. However, despite the inherent flexibility of the alpha-(1-->6) linkage, the dihedral angles have no transition and are more rigid than that in a linear glucan. CYS13, which consists of only beta-(1-->2) linkages, is somewhat less flexible than other glycans, and one of its linkages adopts a higher energy conformation. In addition, the root-mean-square fluctuation of this linkage is lower than that of other linkages. Furthermore, the potential energy of glucans increases in the order of LINEAR, OPGR, and CYS13. These results provide evidence of the existence of conformational constraints in the cyclic glucan. The alpha-(1-->6)-glycosidic linkage can relieve this constraint more efficiently than the beta-(1-->2) linkage. The conformation of OPGR can reconcile the tendency for individual glycosidic bonds to adopt energetically favorable conformations with the requirement for closure of the macrocyclic ring by losing the inherent flexibility of the alpha-(1-->6)-glycosidic linkage.     

An enzymatically produced novel cyclic tetrasaccharide, cyclo-{-->6)-alpha-D-Glcp-(1-->4)-alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->4)-alpha-D-Glcp-(1-->} (cyclic maltosyl-(1-->6)-maltose), from starch

A bacterial strain M6, isolated from soil and identified as Arthrobacter globiformis, produced a novel nonreducing oligosaccharide. The nonreducing oligosaccharide was produced from starch using a culture supernatant of the strain as enzyme preparation. The oligosaccharide was purified as a crystal preparation after alkaline treatment and deionization of the reaction mixture. The structure of the oligosaccharide was determined by methylation analysis, mass spectrometry, and (1)H and (13)C NMR spectroscopy, and it was demonstrated that the oligosaccharide had a cyclic structure consisting of four glucose residues joined by alternate alpha-(1-->4)- and alpha-(1-->6)-linkages. The cyclic tetrasaccharide, cyclo-{-->6)-alpha-D-Glcp(1-->4)-alpha-D-Glcp(1-->6)-alpha-D-Glcp(1-->4)-alpha-D-Glcp(1-->}, was found to be a novel oligosaccharide, and was tentatively called cyclic maltosyl-maltose (CMM). CMM was not hydrolyzed by various amylases, such as alpha-amylase, beta-amylase, glucoamylase, isoamylase, pullulanase, maltogenic alpha-amylase, and alpha-glucosidase, but hydrolyzed by isomalto-dextranase to give rise to isomaltose. This is the first report of the cyclic tetrasaccharide, which has alternate alpha-(1-->4)- and alpha-(1-->6)-glucosidic linkages.     

Optimization of conditions for the efficient production of mutan in streptococcal cultures and post-culture liquids

The strain Streptococcus sobrinus CCUG 21020 was found to produce water-insoluble and adhesive mutan. The factors influencing both stages of the mutan production, i.e. streptococcal cultures and glucan synthesis in post-culture supernatants were standardized. The application of optimized process parameters for mutan production on a larger scale made it possible to obtain approximately 2.2 g of water-insoluble glucan per 11 of culture supernate--this productivity was higher than the best reported in the literature. It was shown that some of the tested beet sugars might be successfully utilized as substitutes for pure sucrose in the process of mutan synthesis. Nuclear magnetic resonance analyses confirmed that the insoluble biopolymer synthesized by a mixture of crude glucosyltransferases was a mixed-linkage (1-->3), (1-->6)-alpha-D-glucan (the so-called mutan) with a greater proportion of 1,3 to 1,6 linkages.     

Analysis of the active center of Bacillus stearothermophilus neopullulanase.

The active center of the neopullulanase from Bacillus stearothermophilus was analyzed by means of site-directed mutagenesis. The amino acid residues located in the active center of the neopullulanase were tentatively identified according to a molecular model of Taka-amylase A and homology analysis of the amino acid sequences of neopullulanse, Taka-amylase A, and other amylolytic enzymes. When amino acid residues Glu and Asp, corresponding to the putative catalytic sites, were replaced by the oppositely charged (His) or noncharged (Gln or Asn) amino acid residue, neopullulanase activities toward alpha-(1----4)- and alpha-(1----6)-glucosidic linkages disappeared. When the amino acids corresponding to the putative substrate-binding sites were replaced, the specificities of the mutated neopullulanases toward alpha-(1----4)- and alpha-(1----6)-glucosidic linkages were obviously different from that of the wild-type enzyme. This finding proves that one active center of neopullulanase participated in the dual activity toward alpha-(1----4)- and alpha-(1----6)-glucosidic linkages. Pullulan is a linear glucan of maltotriosyl units linked through alpha-(1----6)-glucosidic linkages. The production ratio of panose from pullulan was significantly increased by using the mutated neopullulanase which exhibited higher specificity toward the alpha-(1----4)-glucosidic linkage. In contrast, the production ratio of panose was obviously decreased by using the mutated neopullulanse which exhibited higher specificity toward the alpha-(1----6)-glucosidic linkage.     

Differential inhibition of branching enzyme in a morphological mutant and in wild type Neurospora. Influence of carbon source in the growth medium.

1. A morphological mutant of Neurospora crassa, smco 9, (R2508) that exhibits colonial morphology when grown on sucrose or on maltose, showed a partial reversal of this morphology toward that of the wild type when it was grown on potato starch or on isomaltose. 2. A common feature of both potato starch and isomaltose is the presence of alpha-1, 6 glucosidic linkages. This suggested that these morphological effects might be due to differences in alpha-1,4 glucan: alpha-1,4 glucan 6 glycosyltransferase, (EC 2.4.1.18) commonly known as "the branching enzyme". 3. The branching enzyme was purified from wild type, Neurospora crassa, and from the semicolonial mutant, R2508, both grown on sucrose or on potato starch. It has a molecular weight of 140,000 as estimated by gel filtration on a Bio Gel A 1.5 m column. This enzyme plus phosphorylase a in an unprimed reaction catalyzes the synthesis of a branched polysaccharide in vitro. 4. No branching enzyme activity was apparent in extracts of the mutant R2508, grown on potato starch until a thermolabile inhibitor was removed by fractionation on a DEAE column. 5. This inhibitor has a molecular weight greater than 100,000 as estimated on a P-100 polyacrylamide gel column. The specificity of the inhibitor is not absolute in that it inhibits glycogen synthetase in addition to the branching enzyme in Neurospora.     

Dextran acceptor reaction of Streptococcus sobrinus glucosyltransferase GTF-I as revealed by using uniformly 13C-labeled sucrose.

A sucrose glucosyltransferase GTF-I from cariogenic Streptococcus sobrinus transferred the uniformly 13C-labeled glucosyl residue ([U-(13)C]Glc) from [U-(13)C]sucrose to exogenous dextran T500 at the non-reducing-end, mostly by alpha-(1-->6) linkages and partially by alpha-(1-->3) linkages, as revealed by the 13C-(13)C NMR coupling pattern. With increasing amounts of [U-(13)C]sucrose, transfer of [U-(13)C]Glc to the alpha-(1-->3)-linked chain became predominant without increase in the number of chains. The transfer of [U-(13)C]Glc to an isomaltopentaose acceptor occurred similarly to its transfer to T500. alpha-(1-->3)-branches in the [U-(13)C]dextran, specifically synthesized from [U-(13)C]sucrose by a Streptococcus bovis dextransucrase, were not formed by GTF-I, as judged by the observation that a newly-formed alpha-1,3,6-branched [U-(13)C]Glc was not detected, which could have been formed by transferring the unlabeled Glc from sucrose to the internal alpha-(1-->6)-linked [U-(13)C]Glc at C-3. The 13C-(13)C one-bond coupling constants (1J) were also recorded for the C-1--C-6 bond of the internal alpha-(1-->6)-linked [U-(13)C]Glc and of the non-reducing-end [U-(13)C]Glc.     

The production of glucans via glucansucrases from Lactobacillus satsumensis isolated from a fermented beverage starter culture

Several starter cultures used in the production of fermented beverages were screened for lactic acid bacteria that produced water-insoluble polysaccharides from sucrose. The strain producing the greatest amount was identified as Lactobacillus satsumensis by its 16S RNA sequence and was deposited in the ARS culture collection as NRRL B-59839. This strain produced at least two α-d-glucans from sucrose. One was a water-soluble dextran, consisting of predominantly α-(1?→?6)-linked d-glucose units, and the other was a water-insoluble glucan containing both α-(1?→?6)-linked and α-(1?→?3)-linked d-glucose units. The culture fluid was found to contain glucansucrases responsible for the two glucans, and no significant level of fructansucrase was detected. Glucansucrase activity was not present in the culture fluid when the bacteria were grown on glucose, fructose, or raffinose as the carbon source. Although the water-soluble glucans produced by cell-free enzyme and by cell suspensions were essentially identical, the same was not true for the water-insoluble glucans. The water-insoluble glucan produced by cell-free culture fluid contained a higher proportion of α-(1?→?3)-linked d-glucose units than the water-insoluble glucan produced by cell suspensions.     

Role of the two catalytic domains of DSR-E dextransucrase and their involvement in the formation of highly alpha-1,2 branched dextran

The dsrE gene from Leuconostoc mesenteroides NRRL B-1299 was shown to encode a very large protein with two potentially active catalytic domains (CD1 and CD2) separated by a glucan binding domain (GBD). From sequence analysis, DSR-E was classified in glucoside hydrolase family 70, where it is the only enzyme to have two catalytic domains. The recombinant protein DSR-E synthesizes both alpha-1,6 and alpha-1,2 glucosidic linkages in transglucosylation reactions using sucrose as the donor and maltose as the acceptor. To investigate the specific roles of CD1 and CD2 in the catalytic mechanism, truncated forms of dsrE were cloned and expressed in Escherichia coli. Gene products were then small-scale purified to isolate the various corresponding enzymes. Dextran and oligosaccharide syntheses were performed. Structural characterization by (13)C nuclear magnetic resonance and/or high-performance liquid chromatography showed that enzymes devoid of CD2 synthesized products containing only alpha-1,6 linkages. On the other hand, enzymes devoid of CD1 modified alpha-1,6 linear oligosaccharides and dextran acceptors through the formation of alpha-1,2 linkages. Therefore, each domain is highly regiospecific, CD1 being specific for the synthesis of alpha-1,6 glucosidic bonds and CD2 only catalyzing the formation of alpha-1,2 linkages. This finding permitted us to elucidate the mechanism of alpha-1,2 branching formation and to engineer a novel transglucosidase specific for the formation of alpha-1,2 linkages. This enzyme will be very useful to control the rate of alpha-1,2 linkage synthesis in dextran or oligosaccharide production.     

Construction of chimeric glucansucrases for analyzing substrate-binding regions that affect the structure of glucan products

A gene that encodes dextransucrase S (dsrS) from Leuconostoc mesenteroides NRRL B-512F encodes a glucansucrase dextransucrase S (DSRS) which mainly produces water-soluble glucan (dextran), while the dsrT5 gene derived from dsrT of the B-512F strain encodes an enzyme dextransucrase T5 (DSRT5), which mainly produces water-insoluble glucan. Tyr340-Asn510 of DSRS and Tyr307-Asn477 of DSRT5 (Site 1), Lys696-Gly768 of DSRS and Lys668-Gly740 of DSRT5 (Site 2), and Asn917-Lys1131 of DSRS and Asn904-Lys1118 of DSRT5 (Site 3) were exchanged and six different chimeric enzymes were constructed. Water-soluble glucan produced by recombinant DSRS was composed of 64% 6-linked glucopyranoside (Glcp), 9% 3,6-linked Glcp, and 13% 4-linked Glcp. Water-insoluble glucan produced by recombinant DSRT5 was composed of 47% 6-linked Glcp and 43% 3-linked Glcp. All of the chimeric enzymes produced glucans different from the ones produced by their parental enzymes. Some of the glucans produced by chimeric enzymes were extremely changed. The Site 1 chimeric enzyme of DSRS (STS1) produced water-soluble glucan composed mostly of 6-linked Glcp. That of DSRT5 (TST1) produced water-insoluble glucan composed mostly of 4-linked Glcp. The Site 3 chimeric enzyme of DSRS (STS3) produced mainly water-insoluble glucan, DSRT5 (TST3) produced mainly water-soluble glucans, and all of the glucan fractions consisted of 3-Glcp, 4-Glcp, and 6-Glcp. The amounts of the three linkages in the water-soluble glucan produced by TST3 were about 1:1:1. Site 1 was assumed to be important for making or avoiding making alpha-1,4 linkages, while Site 3 was assumed to be important for determining the kinds of glucosyl linkages made.     

Structural analysis of the alpha-D-glucan (EPS180) produced by the Lactobacillus reuteri strain 180 glucansucrase GTF180 enzyme

The neutral exopolysaccharide EPS180 produced from sucrose by the glucansucrase GTF180 enzyme from Lactobacillus reuteri 180 was found to be a (1-->3,1-->6)-alpha-D-glucan, with no repeating units present. Based on linkage analysis, periodate oxidation, and 1D/2D 1H and 13C NMR spectroscopy of the intact EPS180, as well as MS and NMR analysis of oligosaccharides obtained by partial acid hydrolysis of EPS180, a composite model, that includes all identified structural features, was formulated as follows: [Formula: see text].     

Molecular Characterization of a Novel Glucosyltransferase from Lactobacillus reuteri Strain 121 Synthesizing a Unique, Highly Branched Glucan with α-(1→4) and α-(1→6) Glucosidic Bonds

Lactobacillus reuteri strain 121 produces a unique, highly branched, soluble glucan in which the majority of the linkages are of the α-(1→4) glucosidic type. The glucan also contains α-(1→6)-linked glucosyl units and 4,6-disubstituted α-glucosyl units at the branching points. Using degenerate primers, based on the amino acid sequences of conserved regions from known glucosyltransferase (gtf) genes from lactic acid bacteria, the L. reuteri strain 121 glucosyltransferase gene (gtfA) was isolated. The gtfA open reading frame (ORF) was 5,343 bp, and it encodes a protein of 1,781 amino acids with a deduced M_r of 198,637. The deduced amino acid sequence of GTFA revealed clear similarities with other glucosyltransferases. GTFA has a relatively large variable N-terminal domain (702 amino acids) with five unique repeats and a relatively short C-terminal domain (267 amino acids). The gtfA gene was expressed in Escherichia coli, yielding an active GTFA enzyme. With respect to binding type and size distribution, the recombinant GTFA enzyme and the L. reuteri strain 121 culture supernatants synthesized identical glucan polymers. Furthermore, the deduced amino acid sequence of the gtfA ORF and the N-terminal amino acid sequence of the glucosyltransferase isolated from culture supernatants of L. reuteri strain 121 were the same. GTFA is thus responsible for the synthesis of the unique glucan polymer in L. reuteri strain 121. This is the first report on the molecular characterization of a glucosyltransferase from a Lactobacillus strain.     

The influence of mutanase and dextranase on the production and structure of glucans synthesized by streptococcal glucosyltransferases

Glucanohydrolases, especially mutanase [alpha-(1-->3) glucanase; EC 3.2.1.59] and dextranase [alpha-(1-->6) glucanase; EC 3.2.1.11], which are present in the biofilm known as dental plaque, may affect the synthesis and structure of glucans formed by glucosyltransferases (GTFs) from sucrose within dental plaque. We examined the production and the structure of glucans synthesized by GTFs B (synthesis of alpha-(1-->3)-linked glucans) or C [synthesis of alpha-(1-->6)- and alpha-(1-->3)-linked glucans] in the presence of mutanase and dextranase, alone or in combination, in solution phase and on saliva-coated hydroxyapatite beads (surface phase). The ability of Streptococcus sobrinus 6715 to adhere to the glucan, which was formed in the presence of the glucanohydrolases was also explored. The presence of mutanase and/or dextranase during the synthesis of glucans by GTF B and C altered the proportions of soluble to insoluble glucan. The presence of either dextranase or mutanase alone had a modest effect on total amount of glucan formed, especially in the surface phase; the glucanohydrolases in combination reduced the total amount of glucan. The amount of (1-->6)-linked glucan was reduced in presence of dextranase. In contrast, mutanase enhanced the formation of soluble glucan, and reduced the percentage of 3-linked glucose of GTF B and C glucans whereas dextranase was mostly without effect. Glucan formed in the presence of dextranase provided fewer binding sites for S. sobrinus; mutanase was devoid of any effect. We also noted that the GTFs bind to dextranase and mutanase. Glucanohydrolases, even in the presence of GTFs, influence glucan synthesis, linkage remodeling, and branching, which may have an impact on the formation, maturation, physical properties, and bacterial binding sites of the polysaccharide matrix in dental plaque. Our data have relevance for the formation of polysaccharide matrix of other biofilms.     

Efficient chemoenzymatic synthesis of globotriose and its derivatives with a recombinant alpha-(1-->4)-galactosyltransferase

A truncated alpha-(1-->4)-galactosyltransferase (LgtC) gene from Neisseria meningitidis was cloned. The recombinant glycosyltransferase was expressed in Escherichia coli BL21 (DE3) strain with high specific activity (5 units/mg protein). Its acceptor specificity was carefully characterized. Then the purified enzyme was utilized in highly efficient syntheses of globotriose and a variety of alpha-(1-->4)-galactosylated derivatives as potential antibacterial agents.     

The Gram-negative bacterium Azotobacter chroococcum NCIMB 8003 employs a new glycoside hydrolase family 70 4,6-α-glucanotransferase enzyme (GtfD) to synthesize a reuteran like polymer from maltodextrins and starch

BackgroundOriginally the glycoside hydrolase (GH) family 70 only comprised glucansucrases of lactic acid bacteria which synthesize α-glucan polymers from sucrose. Recently we have identified 2 novel subfamilies of GH70 enzymes represented by the Lactobacillus reuteri 121 GtfB and the Exiguobacterium sibiricum 255-15 GtfC enzymes. Both enzymes catalyze the cleavage of (α1 → 4) linkages in maltodextrin/starch and the synthesis of consecutive (α1 → 6) linkages. Here we describe a novel GH70 enzyme from the nitrogen-fixing Gram-negative bacterium Azotobacter chroococcum, designated as GtfD.MethodsThe purified recombinant GtfD enzyme was biochemically characterized using the amylose-staining assay and its products were identified using profiling chromatographic techniques (TLC and HPAEC-PAD). Glucans produced by the GtfD enzyme were analyzed by HPSEC-MALLS-RI, methylation analysis, 1D/2D [1]H/[13]C NMR spectroscopy and enzymatic degradation studies.ResultsThe A. chroococcum GtfD is closely related to GtfC enzymes, sharing the same non-permuted domain organization also found in GH13 enzymes and displaying 4,6-α-glucanotransferase activity. However, the GtfD enzyme is unable to synthesize consecutive (α1 → 6) glucosidic bonds. Instead, it forms a high molecular mass and branched α-glucan with alternating (α1 → 4) and (α1 → 6) linkages from amylose/starch, highly similar to the reuteran polymer synthesized by the L. reuteri GtfA glucansucrase from sucrose.ConclusionsIn view of its origin and specificity, the GtfD enzyme represents a unique evolutionary intermediate between family GH13 (α-amylase) and GH70 (glucansucrase) enzymes.General significanceThis study expands the natural repertoire of starch-converting enzymes providing the first characterization of an enzyme that converts starch into a reuteran-like α-glucan polymer, regarded as a health promoting food ingredient.