Hydrogel-coated streptavidin piezoelectric biosensors and applications to selective detection of Strep-tag displaying cells

Two different hydrogel-coated streptavidin (SAv) piezoelectric chips were investigated. One was directly prepared by immobilizing SAv molecules covalently onto a dextran-modified crystal, and the other one was indirectly prepared by physically adsorbing SAv onto a biotin-linked dextran surface. The covalent preparation yielded 80% more SAv-binding and better subsequent adsorption of biotinylated bovine serum albumin (bBSA). Both chips displayed the best binding affinity with bBSA at pH 5.0 in a flow injection analysis and exhibited reproductive real-time response during layer-by-layer assembly of a bBSA and SAv multilayer film. In the multilayer assembly, approximately 3-7 SAv molecules were captured by each immobilized bBSA, and the estimated apparent KD values of the binding of flowing bBSA with surface SAv were 0.24 and 0.11 microM in the first two cycles of the covalently prepared chip, respectively. Two Escherichia coli cells, each flagellum-displaying Strep-tag I and Strep-tag II, respectively, were selectively detected by both kinds of SAv chips. These studies suggest the potential application of both chips in real-time screening SAv affinity ligands from a cell-display random peptide library.     

Novel injectable pH and temperature sensitive block copolymer hydrogel

A novel pH and temperature sensitive block copolymer was prepared by adding pH sensitive moiety to temperature sensitive block copolymer. This block copolymer solution showed a reversible sol-gel transition by a small pH change in the range of pH 7.4-8.0 and also by the temperature change in the region of body temperature. The very precise molecular weight control of block copolymer and the prudential tuning of hydrophilic-hydrophobic balance were needed to control the phase diagram. This block copolymer solution forms a gel at 37 degrees C, pH 7.4 (human body). When the block copolymer solution is at room temperature and pH 8.0 as a sol state, both the temperature and pH change are needed for the gelation. This material can be employed as injectable carriers for hydrophobic drugs and proteins, etc. Gelation inside the needle can be prevented by an increase in the temperature during injection, because it does not change into the gel form with only increasing temperature. This material can be used for even a long guide catheter into the body. The block copolymer hydrogel which shows the sol-gel transition by the small pH change from pH 8.0 to pH 7.4 has merits in the delivery system for protein and cells which show cytotoxicity in acidic (below pH 6.5) or basic (above pH 8.5) conditions. This block copolymer system could be used as a template technology for injectable delivery systems.     

Biotin-4-fluorescein based fluorescence quenching assay for determination of biotin binding capacity of streptavidin conjugated quantum dots

The valency of quantum dot nanoparticles conjugated with biomolecules is closely related to their performance in cell tagging, tracking, and imaging experiments. Commercially available streptavidin conjugates (SAv QDs) are the most commonly used tool for preparing QD-biomolecule conjugates. The fluorescence quenching of biotin-4-fluorscein (B4F) provides a straightforward assay to quantify the number of biotin binding sites per SAv QD. The utility of this method was demonstrated by quantitatively characterizing the biotin binding capacity of commercially available amphiphilic poly(acrylic acid) Qdot ITK SAv conjugates and poly(ethylene glycol) modified Qdot PEG SAv conjugates with emission wavelengths of 525, 545, 565, 585, 605, 625, 655, 705, and 800 nm. Results showed that 5- to 30-fold more biotin binding sites are available on ITK SAv QDs compared to PEG SAv QDs of the same color with no systematic variation of biotin binding capacity with size.     

Evaluation of biotin-dye conjugates for use in an HPLC assay to assess relative binding of biotin derivatives with avidin and streptavidin

In this investigation, studies were conducted to determine if size exclusion HPLC could be used to assess relative association rates (on-rates) and dissociation rates (off-rates) of biotin derivatives from avidin (Av) and streptavidin (SAv). For easy detection and quantification of biotin derivatives, molecules that can be detected by UV absorbance were conjugated to biotin. Concern that conjugation of the chromophoric moieties (dyes) might affect biotin binding with Av and SAv or might interact with the HPLC column led to evaluation of 10 biotin-dye conjugates. The dyes conjugated with biotin included dansyl, cyanocobalamin (CN-Cbl), coumarin 343, Lissamine-rhodamine, fluorescein, Cascade Blue, Lucifer Yellow, Oregon Green, tetramethylrhodamine, and Alexa Fluor 594. The biotin-dye conjugates were initially evaluated to determine their peak characteristics on two different size exclusion HPLC columns. Measurement of the percent of biotin-dye conjugate bound with Av in the presence of an equal quantity of biotin provided an association rate relative to biotin. All of the biotin-dyes tested had association rates within a factor of 3x (slower) that of biotin. The relative dissociation rate of biotin-dye conjugates was assessed by challenging the biotin conjugate bound to Av or SAv with a large excess of biotin. All of the initial biotin-dye conjugates tested bound Av and SAv tightly resulting in very slow dissociation rates. From the biotin-dye conjugates studied, biotin-CN-Cbl, 6b, was selected as the best conjugate for the HPLC assay. To test the HPLC assay, an iminobiotin-CN-Cbl conjugate, 13a, and a biotin-sarcosine-CN-Cbl conjugate, 13b, were synthesized. The fact that the iminobiotin does not bind with Av at physiological pH was easily detected in the size exclusion HPLC assay. The biotin-sarcosine-CN-Cbl conjugate was expected to have a more rapid dissociation rate than the other biotin-dye conjugates. This was confirmed in that HPLC assay. Although 13b bound tightly with Av in the absence of added biotin, it was completely released within 1 h when challenged by an excess of biotin. A slower dissociation of 13b was noted with SAv. The results obtained indicate that CN-Cbl conjugates of biotin derivatives can be used to determine relative on-rates and off-rates of biotin derivatives with Av and SAv. The studies also demonstrated that the biotin-CN-Cbl conjugate, 6b, can be used as a reference compound to compare on-rates and off-rates of nonchromophoric biotin derivatives.     

Sulfonamide-based pH- and temperature-sensitive biodegradable block copolymer hydrogels

Novel pH- and temperature-sensitive biodegradable poly(epsilon-caprolactone-co-lactide)-poly(ethylene glycol) (PCLA-PEG) block copolymers were synthesized with oligomeric sulfamethazine (OSM) end groups (OSM-PCLA-PEG-PCLA-OSM). Aqueous solutions of these block copolymers have shown sol-gel transition behavior upon both temperature and pH changes under physiological conditions (37 degrees C, pH 7.4). The sol-gel transition of these block copolymer solutions was fine-tuned by controlling the PEG length, the hydrophobic to hydrophilic block ratio (PCLA/PEG), and the molecular weight of the sulfamethazine oligomer. Since changes in temperature do not induce gel formation in this pH- and temperature-sensitive block copolymer solution, this hydrogel can be employed as an injectable carrier using a long guide catheter into the body. In addition, the pH of the block copolymer solution showed no change following PCLA degradation over 1 month, and no indication of gel collapse was observed on addition of buffer solution. As such, these properties make the OSM-PCLA-PEG-PCLA-OSM hydrogel an ideal candidate for use as an injectable carrier for certain protein-based drugs known to denature in low-pH environments.     

Solubilization and controlled release of a hydrophobic drug using novel micelle-forming ABC triblock copolymers

Amphiphilic ABC triblock copolymers composed of monomethoxy-capped poly(ethylene glycol) (MPEG), poly(2-(dimethylamino)ethyl methacrylate) (DMA), and poly(2-(diethylamino)ethyl methacrylate) (DEA) have been synthesized by atom transfer radical polymerization (ATRP). These copolymers dissolve molecularly in acidic aqueous media at room temperature due to protonation of the tertiary amine groups on the DMA and DEA residues. On adjusting the pH with base, micellization occurred at pH 8, with the water-insoluble, deprotonated DEA block forming the hydrophobic cores and the MPEG and DMA blocks forming the hydrophilic micellar coronas and inner shells, respectively. This pH-induced micellization has been exploited to develop a solvent-free protocol for drug loading. A model hydrophobic drug, dipyridamole (DIP), which dissolves in acid but is insoluble above pH 5.8, was incorporated into the micelles by increasing the pH of an aqueous drug/copolymer mixture to 9. Both the empty and the drug-loaded micelles were characterized by dynamic light scattering and fluorescence studies. The interaction of both pyrene and DIP with the MPEG-DMA-DEA micelles was studied by fluorescence; both compounds had relatively high partition coefficients into the micelles, 4.5 x 10(5) and 1.5 x 10(4), respectively. Intensity-average micelle diameters ranged from 20 to 90 nm, depending on the polymer composition and concentration. Shorter MPEG blocks (Mn = 2000) produced larger micelles than longer MPEG blocks (Mn = 5000) due to the shift in the hydrophilic-hydrophobic balance of the copolymer. Transmission electron microscopy studies of the drug-loaded micelles indicated spherical morphologies and reasonably uniform particle size distributions, which is in marked contrast to the needlelike morphology observed for pure DIP in the absence of the copolymer. Experiments on controlled release demonstrated that DIP-loaded MPEG-DMA-DEA micelles act as a drug carrier, giving slow release to the surrounding solution over a period of days. Rapid release can be triggered by reducing the pH to reverse the micellization.     

Catechol sensor using poly(aniline-co-o-aminophenol) as an electron transfer mediator

In this work, poly(aniline-co-o-aminophenol) (copolymer) was used as an electron transfer mediator in the electrochemical oxidation of catechol due to its reversible redox over a wide range of pH. The experimental results indicate that the anodic peak potential of catechol at the copolymer electrode is lower than that at the platinum electrode in a solution consisting of catechol and sodium sulfate with pH 5.0, and the activation energy for the electrochemical oxidation of catechol at the copolymer electrode is low (23.6 kJ mol(-1)). These are strong evidence for the electrocatalytic oxidation of catechol at the copolymer electrode. The -OH group on the copolymer chain plays an important role in the electron transfer between the copolymer electrode and catechol in the solution. Based on the catalytic oxidation, the copolymer is used as a sensor to determine the concentration of catechol. The response current of the sensor depends on the concentration of catechol, pH, applied potential and temperature. At 0.55 V (versus saturated calomel reference electrode (SCE)) and pH 5.0, the sensor has a fast response (about 10s) to catechol and good operational stability. The sensor shows a linear response range between 5 and 80 microM catechol with a correlation coefficient of 0.997. It was found that phenol and resorcinol cannot be oxidized at the copolymer electrode at potentials < or =0.55 V, so controlling the sensor potential affords a good way of avoiding the effect of phenol and resorcinol on the determination of catechol.     

Immobilization of tyrosinase and alcohol oxidase in conducting copolymers of thiophene functionalized poly(vinyl alcohol) with pyrrole

Immobilization of tyrosinase and alcohol oxidase is achieved in the copolymer of pyrrole with vinyl alcohol with thiophene side groups (PVATh-co-PPy) which is a newly synthesized conducting polymer. PVATh-co-PPy/alcohol oxidase and PVATh-co-PPy/tyrosinase electrodes are constructed by the entrapment of enzyme in conducting copolymer matrix during electrochemical copolymerization. For tyrosinase and alcohol oxidase enzymes, catechol and ethanol are used as the substrates, respectively. Kinetic parameters: maximum reaction rates (V(max)) and Michaelis-Menten constants (K(m)) are obtained. V(max) and K(m) are found as 2.75 micromol/(minelectrode) and 18 mM, respectively, for PVATh-co-PPy/alcohol oxidase electrode and as 0.0091micromol/(minelectrode) and 40 mM, respectively, for PVATh-co-PPy/tyrosinase electrode. Maximum temperature and pH values are investigated and found that both electrodes have a wide working range with respect to both temperature and pH. Operational and storage stabilities show that although they have limited storage stabilities, the enzyme electrodes are useful with respect to operational stabilities.     

Poly(L-lysine)-graft-dextran copolymer promotes pyrimidine motif triplex DNA formation at physiological pH. Thermodynamic and kinetic studies

Extreme instability of pyrimidine motif triplex DNA at physiological pH severely limits its use for artificial control of gene expression in vivo. Stabilization of the pyrimidine motif triplex at physiological pH is therefore of great importance in improving its therapeutic potential. To this end, isothermal titration calorimetry interaction analysis system and electrophoretic mobility shift assay have been used to explore the thermodynamic and kinetic effects of our previously reported triplex stabilizer, poly (L-lysine)-graft-dextran (PLL-g-Dex) copolymer, on pyrimidine motif triplex formation at physiological pH. Both the thermodynamic and kinetic analyses have clearly indicated that in the presence of the PLL-g-Dex copolymer, the binding constant of the pyrimidine motif triplex formation at physiological pH was about 100 times higher than that observed without any triplex stabilizer. Of importance, the triplex-promoting efficiency of the copolymer was more than 20 times higher than that of physiological concentrations of spermine, a putative intracellular triplex stabilizer. Kinetic data have also demonstrated that the observed copolymer-mediated promotion of the triplex formation at physiological pH resulted from the considerable increase in the association rate constant rather than the decrease in the dissociation rate constant. Our results certainly support the idea that the PLL-g-Dex copolymer could be a key material and may eventually lead to progress in therapeutic applications of the antigene strategy in vivo.     

"Schizophrenic" micellization associated with coil-to-helix transitions based on polypeptide hybrid double hydrophilic rod-coil diblock copolymer

A polypeptide hybrid double hydrophilic diblock copolymer (DHBC), poly( N-isopropylacrylamide)- b-poly( l-glutamic acid) (PNIPAM- b-PLGA), was synthesized via the ring-opening polymerization of gamma-benzyl- l-glutamate N-carboxyanhydride (BLG-NCA) using monoamino-terminated PNIPAM as the macroinitiator, followed by deprotection of benzyl groups under alkaline conditions. Containing a thermoresponsive PNIPAM block and a pH-responsive PLGA block, the obtained polypeptide hybrid diblock copolymer molecularly dissolves in aqueous solution at alkaline pH and room temperature but supramolecularly self-assembles into PNIPAM-core micelles at alkaline pH and elevated temperatures and PLGA-core micelles at acidic pH and room temperature accompanied with coil-to-helix transition of the PLGA sequence. The pH- and thermoresponsive "schizophrenic" micellization behavior of PNIPAM- b-PLGA diblock copolymer has been investigated by (1)H NMR, optical transmittance, fluorescence probe measurement, transmission electron microscopy (TEM), dynamic and static laser light scattering (LLS), and circular dichroism (CD) spectroscopy. Moreover, the micellization process was investigated employing stopped-flow light scattering technique. The pH-induced micelle growth of PNIPAM- b-PLGA in aqueous solution exhibits drastically different kinetics compared to that of conventional pH-responsive DHBCs, probably due to the stabilization effects exerted by the formed alpha-helix secondary structures within the PLGA core at low pH. Exhibiting "schizophrenic" micellization, the polypeptide sequence of PNIPAM- b-PLGA can either locate within micelle cores or stabilizing coronas. The incorporation of polypeptide block into DHBCs can endow them with structural versatility, tunable spatial arrangement of chain segments within self-assembled nanostructures, and broader applications in the field of biomedicines.     

Controlling the aggregation of conjugates of streptavidin with smart block copolymers prepared via the RAFT copolymerization technique

Block copolymers containing stimuli-responsive segments provide important new opportunities for controlling the activity and aggregation properties of protein-polymer conjugates. We have prepared a RAFT block copolymer of a biotin-terminated poly(N-isopropylacrylamide) (PNIPAAm)-b-poly(acrylic acid) (PAA). The number-average molecular weight (M(n)) of the (PNIPAAm)-b-(PAA) copolymer was determined to be 17.4 kDa (M(w)/M(n) = 1.09). The PNIPAAm block had an M(n) of 9.5 kDa and the poly(acrylic acid) (PAA) block had an M(n) of 7.9 kDa. We conjugated this block copolymer to streptavidin (SA) via the terminal biotin on the PNIPAAm block. We found that the usual aggregation and phase separation of PNIPAAm-SA conjugates that follow the thermally induced collapse and dehydration of PNIPAAm (the lower critical solution temperature (LCST) of PNIPAAm is 32 degrees C in water) is prevented through the shielding action of the PAA block. In addition, we show that the cloud point and aggregation properties (as measured by loss in light transmission) of the [(PNIPAAm)-b-(PAA)]-SA conjugate also depended on pH. At pH 7.0 and at temperatures above the LCST, the block copolymer alone was found to form particles of ca. 60 nm in diameter, while the bioconjugate exhibited very little aggregation. At pH 5.5 and 20 degrees C, the copolymer alone was found to form large aggregates (ca. 218 nm), presumably driven by hydrogen bonding between the -COOH groups of PAA with other -COOH groups and also with the -CONH- groups of PNIPAAm. In comparison, the conjugate formed much smaller particles (ca. 27 nm) at these conditions. At pH 4.0, however, large particles were formed from the conjugate both above and below the LCST (ca. 700 and 540 nm, respectively). These results demonstrate that the aggregation properties of the block copolymer-SA conjugate are very different from those of the free block copolymer, and that the outer-oriented hydrophilic block of PAA shields the intermolecular aggregation of the block copolymer-SA bioconjugate at pH values where the -COOH groups of PAA are significantly ionized.     

Prediction of lower critical solution temperature of N-isopropylacrylamide–acrylic acid copolymer by an artificial neural network model

In this paper, we have investigated the lower critical solution temperature (LCST) of N-isopropylacrylamide–acrylic acid (NIPAAm-AAc) copolymer as a function of chain-transfer agent/initiator mole ratio, acrylic acid content of copolymer, concentration, pH and ionic strength of aqueous copolymer solution. Aqueous solutions with the desired properties were prepared from previously purified polymers, synthesized at 65 °C by solution polymerization using ethanol. The effects of each parameter on the LCST were examined experimentally.In addition, an artificial neural network model that is able to predict the lower cretical solution temperature was develeped. The predictions from this model compare well against both training and test data sets with an average error less than 2.53%.Figure Cross plot of predicted and experimental LCST values for the testing data set.     

Nonequivalence of the metal binding sites in vanadyl-labeled human serum transferrin.

Vanadyl ion, VO(IV), has been used as an electron paramagnetic resonance (EPR) spin label to study the metal-binding properties of human serum transferrin in the presence of bicarbonate. Iron-saturated transferrin does not bind the vanadyl ion. Room temperature titrations of apotransferrin with VO(IV) as monitored by EPR indicate the extent of binding to be pH dependent, with a full 0.2 VO(IV) ions per transferrin molecule bound at pH 7.5 and 9, but only about 1.2 VO(IV) ions bound at pH 6. The EPR spectra of frozen solutions with or without 0.1 M NaCUO4 at 77 K show that there are two spectroscopically nonequivalent binding sites (A and B) with a slight difference in binding constants. One site (A site) exhibits essentially constant binding capacity in the pH range 6-9, but the other (B site) becomes less avialable as the pH is reduced below 7. Results with mixed Fe(III)-VO(IV) transferrin complexes suggest that iron shows a slight tendency to bind at the B site over the A site pH 7.5 and 9.0. Only the B site in both vanadyl and iron transferrins is perturbed by the presence of perchlorate.     

Structural transformation of apocytochrome c induced by alternating copolymers of maleic acid and alkene

Apocytochrome c interacts with two copolymers: poly(isobutylene-alt-maleic acid) (PIMA) and poly(1-tetradecene-alt-maleic acid) (PTMA). The interaction leads to apocytochrome c, a conformational change from random coil to alpha-helical structure. The alpha-helix content is influenced by the copolymer concentration, the length of alkyl chain of the copolymers, and pH of the medium. The electrostatic attraction between the copolymer and protein is an indispensable factor for the folding of the protein at acid pH. The hydrophobic interaction is an important factor over the entire pH range, especially when both the copolymer and protein carry negative charges at alkaline pH. The electrostatic and hydrophobic attractions between the copolymer and protein exclude water molecules, promoting the formation of hydrogen bonds within the helical structure. On the other hand, the hydrogen bonds formed between the ionized carboxyl of the copolymer and the amide of the protein partly restrain the formation of hydrogen bonds within the helical structure when the copolymer concentration is higher at pH 6.5 and 10.5.     

Immobilization of trypsin on alginic acid-poly (glycidyl methacrylate) graft copolymer

Trypsin was immobilized onto alginic acid-poly(glycidyl methacrylate) graft copolymer (AAGMA). The resulting immobilized enzyme showed 65% of the soluble enzymatic activity. The temperature optimum was shifted by 5 degrees C to a higher value. The pH optimum of immobilized enzyme has also been shifted by 0.5 units toward the alkaline side when compared to that of soluble enzyme. The pH stability and thermal stability are better than that of soluble enzyme.     

Distribution and Function of Macrophage Galactose-type C-type Lectin 2 (MGL2/CD301b): EFFICIENT UPTAKE AND PRESENTATION OF GLYCOSYLATED ANTIGENS BY DENDRITIC CELLS*

Dendritic cells (DCs) express cell surface lectins that are potentially involved in the recognition, uptake, and presentation of glycosylated foreign substances. A unique calcium-type (C-type) lectin, the macrophage galactose (Gal)-type C-type lectin (MGL/CD301) expressed on DCs, is thought to participate in the recognition of molecules from both altered self and pathogens due to its monosaccharide specificity for Gal and N-acetylgalactosamine (GalNAc). Although mice have two MGL genes, Mgl1 and Mgl2, their distinct roles have not been previously explored. The present report characterizes the properties of MGL2 by examining its distribution and its role in antigen presentation by DCs. We generated an MGL2-specific monoclonal antibody and examined MGL2 expression in tissues by immunohistochemistry and in isolated cells by flow cytometry. The cells reactive with this antibody were shown to be a portion of MGL1-expressing cells, mostly conventional DCs. Internalization of soluble polyacrylamide polymers (PAA) with α-GalNAc residues (GalNAc-PAA) by bone marrow-derived DCs (BM-DCs) was mediated by MGL2, as revealed by a comparison of Mgl1^−/− and Mgl2^−/− BM-DCs with wild-type BM-DCs. Biotinylated GalNAc-PAA conjugated to streptavidin (SAv) was more efficiently presented to SAv-primed T cells by BM-DCs than β-N-acetylglucosamine-PAA conjugated to SAv or SAv alone as shown by thymidine uptake and cytokine production. This is the first report that demonstrates the involvement of GalNAc residues in antigen uptake and presentation by DCs that lead to CD4⁺ T cell activation.     

Thermoseparating water/polymer system: a novel one-polymer aqueous two-phase system for protein purification

In this study we show that proteins can be partitioned and separated in a novel aqueous two-phase system composed of only one polymer in water solution. This system represents an attractive alternative to traditional two-phase systems which uses either two polymers (e.g., PEG/dextran) or one polymer in high-salt concentration (e.g., PEG/salt). The polymer in the new system is a linear random copolymer composed of ethylene oxide and propylene oxide groups which has been hydrophobically modified with myristyl groups (C(14)H(29)) at both ends (HM-EOPO). This polymer thermoseparates in water, with a cloud point at 14 degrees C. The HM-EOPO polymer forms an aqueous two-phase system with a top phase composed of almost 100% water and a bottom phase composed of 5-9% HM-EOPO in water when separated at 17-30 degrees C. The copolymer is self-associating and forms micellar-like structures with a CMC at 12 microM (0.01%). The partitioning behavior of three proteins (lysozyme, bovine serum albumin, and apolipoprotein A-1) in water/HM-EOPO two-phase systems has been studied, as well as the effect of various ions, pH, and temperature on protein partitioning. The amphiphilic protein apolipoprotein A-1 was strongly partitioned to the HM-EOPO-rich phase within a broad-temperature range. The partitioning of hydrophobic proteins can be directed with addition of salt. Below the isoelectric point (pI) BSA was partitioned to the HM-EOPO-rich phase and above the pI to the water phase when NaClO(4)was added to the system. Lysozyme was directed to the HM-EOPO phase with NaClO(4), and to the water phase with Na-phosphate. The possibility to direct protein partitioning between water and copolymer phases shows that this system can be used for protein separations. This was tested on purification of apolipoprotein A-1 from human plasma and Escherichia coli extract. Apolipoprotein A-1 could be recovered in the HM-EOPO-rich phase and the majority of contaminating proteins in the water phase. By adding a new water/buffer phase at higher pH and with 100 mM NaClO(4), and raising the temperature for separation, the apolipoprotein A-1 could be back-extracted from the HM-EOPO phase into the new water phase. This novel system has a strong potential for use in biotechnical extractions as it uses only one polymer and can be operated at moderate temperatures and salt concentrations and furthermore, the copolymer can be recovered.     

Dual stimuli-responsive polypeptide prepared by thiol-ene click reaction of poly(l-cysteine) and N,N-dimethylaminoethyl acrylate

Stimuli-responsive polymers that can undergo conformational changes with external triggers have enabled themselves as smart materials for various utilizations, among which biodegradability is of particular importance to be engineered for biomedical application. In this study, a thermo and pH dual responsive polypeptide (N, N-dimethylaminoethyl acrylate-modified poly(l -cysteine)) (PLC-g-DMAEA) was prepared by the combination of N-carboxyanhydride ring-open polymerization and thiol-ene click chemistry. The biodegradable poly(l -cysteine) (PLC) with pendant thiol groups provided an easily clickable backbone for postmodification, which was demonstrated by reacting with a well-known monomer of N, N-dimethylaminoethyl acrylate (DMAEA) to achieve both temperature and pH responsiveness. The irreversible thermo-response of PLC-g-DMAEA could be attributed to the ordered β-sheets formed upon heating, leading to the trapped side groups with poor water accessibility. Moreover, this copolymer precipitated at pH ranging from 7.5 to 9.7, but protonation of tertiary amine groups (pH < 7.5) and salt forming of masked thiol groups (pH > 9.7) rendered it soluble in water. Our results revealed that a ready available vinyl monomer could be easily clicked onto the biodegradable PLC and its stimuli responsiveness would be reserved. Moreover, the primary and secondary structures of PLC might influence the conformation, thus leading to the unique responsive behavior of the resulted copolymer.     

Kinetic study of the effects of solvation on the dimerization process of alpha-chymotrypsin

The dimeric association process of alpha-chymotrypsin has been studied with the aid of a stopped-flow spectrophotometer at various temperatures and pH values. From the temperature dependences of the forward reaction rate constant (kf) and the equilibrium dimerization constant (KD), the reaction system observed here is concluded to be entropy-driven. The increase in entropy can be attributed to the release of water molecules from both the active site and the surface part of the protein molecule during the course of dimerization. From the pH dependences of the reaction rate constants and the equilibrium constant, the reaction is concluded to depend strongly on the dissociations of the site between the carboxyl group of the aspartic acid and imidazolyl group of the histidine residues (in the higher pH region), and the site between the imidazolyl group of the histidine and the carboxyl group of the tyrosine residue (in the lower pH region), respectively.     

Ca(2+) binding to cardiac troponin C: effects of temperature and pH on mammalian and salmonid isoforms

A reduction in temperature lowers the Ca(2+) sensitivity of skinned cardiac myofilaments but this effect is attenuated when native cardiac troponin C (cTnC) is replaced with skeletal TnC. This suggests that conformational differences between the two isoforms mediate the influence of temperature on contractility. To investigate this phenomenon, the functional characteristics of bovine cTnC (BcTnC) and that from rainbow trout, Oncorhynchus mykiss, a cold water salmonid (ScTnC), have been compared. Rainbow trout maintain cardiac function at temperatures cardioplegic to mammals. To determine whether ScTnC is more sensitive to Ca(2+) than BcTnC, F27W mutants were used to measure changes in fluorescence with in vitro Ca(2+) titrations of site II, the activation site. When measured under identical conditions, ScTnC was more sensitive to Ca(2+) than BcTnC. At 21 degrees C, pH 7.0, as indicated by K(1/2) (-log[Ca] at half-maximal fluorescence, where [Ca] is calcium concentration), ScTnC was 2.29-fold more sensitive to Ca(2+) than BcTnC. When pH was kept constant (7.0) and temperature was lowered from 37.0 to 21.0 degrees C and then to 7.0 degrees C, the K(1/2) of BcTnC decreased by 0.13 and 0.32, respectively, whereas the K(1/2) of ScTnC decreased by 0.76 and 0.42, respectively. Increasing pH from 7.0 to 7.3 at 21.0 degrees C increased the K(1/2) of both BcTnC and ScTnC by 0.14, whereas the K(1/2) of both isoforms was increased by 1.35 when pH was raised from 7.0 to 7.6 at 7.0 degrees C.