Purification and Properties of a Novel Xanthan Depolymerase from a Salt-Tolerant Bacterial Culture, HD1

A novel xanthan depolymerase (endo-β-1,4-glucanase) was isolated from a salt-tolerant bacteria culture (HD1) grown on xanthan. The depolymerase was purified 55-fold through chromatography on ion-exchange and molecular sieve columns, including high-performance liquid chromatography. The purified enzyme fraction was homogeneous as judged by polyacrylamide gel electrophoresis. The molecular weight of this enzyme is 60,000. Optimum pH and temperature for xanthan depolymerase activity were around 5 and 30 to 35°C, respectively. The enzyme was not stable at a temperature higher than 45°C. The activation energy calculated from an Arrhenius plot was 6.40 kcal (26.78 kJ). The enzyme molecule contains no sugar moiety. The amino acid composition of the enzyme protein was determined. Xanthan depolymerase cleaves the endo-β-1,4-glucosidic linkage of the xanthan molecule, freeing reducing groups of some sugars and decreasing viscosity of the polymer solution. Only the backbones of β-1,4-linked glucans with side chains or other substituents were cleaved. No monosaccharide was produced by the action of this enzyme. The oligosac-charide(s) in the low-molecular weight fraction consisted of 15 to 58 monosaccharide units. The enzymic reaction resulted in the decrease in weight-average molecular weight of xanthan from 6.5 × 10⁶ to 8.0 × 10⁵ in 0.5 h. This enzyme alone could not degrade xanthan to a single or multiple pentasaccharide unit(s). Results suggest that there may be regions inside the xanthan molecule that are susceptible to the attack of this enzyme. Xanthan depolymerase activity was not inhibited by many chemicals, including thiols, antioxidants, chlorinated hydrocarbons, metal-chelating agents, and inorganic compounds, except ferric chloride and arsenomolybdate. Many biocides were tested and found not to be inhibitory. Conditions used in enhanced oil recovery operations, i.e., the presence of formaldehyde, Na₂S₂O₄, 2,2-dibromo-3-nitrilopropionamide, and an anaerobic environment, did not inhibit xanthan depolymerase activity.     

AFM studies on gelation mechanism of xanthan gum hydrogels

The effect of annealing on xanthan gum molecules was investigated using atomic force microscopy (AFM). The values of height and width of xanthan gum molecules in AFM images are ca. 1 nm, which strongly indicates that xanthan gum molecules extended on the mica surface are in mono- or double layers. When xanthan gum aqueous solution was annealed, a network structure was observed. In contrast, a network structure was not observed for non-annealed solution. AFM images provide direct information concerning oscillational change of the network structure. It is concluded that xanthan gum molecular chains in aqueous solution aggregate and dissociate in an oscillational manner with increasing annealing time and that a homogeneous network structure was formed by annealing at 40 °C for 24 h.     

Purification and properties of poly(3-hydroxyvaleric acid) depolymerase from Pseudomonas lemoignei

During growth on poly(3-hydroxyvaleric acid), P(3HV), or valerate Pseudomonas lemoignei secretes a P(3HV) depolymerase. This P(3HV) depolymerase was purified from the culture medium of valerate-grown cells by ammonium sulphate precipitation, chromatography on DEAe-sephacel and CM-Sepharose CL 6B. The relative molecular masses of the native as well as the sodium dodecyl sulphate (SDS)-treated enzyme were 53 000 or 54 000, respectively. In contrast to the poly(3-hydroxybutyric acid), P(3HB), depolymerase of Comamonas sp. and P(3HB) depolymerases A and B of P. lemoignei, which are specific for the hydrolysis of P(3HB), the purified P(3HV) depolymerase hydrolysed P(3HB), P(3HV) and co-polymers of 3-hydroxybutyric acid and 3-hydroxyvaleric acid at similar rates. Poly(hydroxyalkanoic acids), consisting of monomers with six and more carbon atoms or substrates characteristic for lipases such as Tween 80 or triolein were not hydrolysed. Maximum activities were measured in 50mm TRIS-HCl buffer, pH 8.0, at 55° C. The apparent K _m values of the purified P(3HV) depolymerase for P(3HB) and P(3HV) were 77 and 65 g polyester/ml, respectively. As the main product of enzymatic hydrolysis of P(3HV), 3-hydroxyvalerate was identified. The depolymerase was insensitive to p-hydroxymercuribenzoate but sensitive to dithioerythritol and phenylmethylsulphonyl fluoride, indicating the absence of active reduced sulphur groups and the presence of essential disulphide bonds and serine residues. Correspondence to: D. Jendrossek     

Identification of Mycelium-Associated Cellulase from Streptomyces reticuli

Among 180 Streptomyces strains tested, 25 were capable of hydrolyzing microcrystalline cellulose (Avicel) at 30°C. Streptomyces reticuli was selected for further studies because of its ability to grow at between 30 and 50°C on Avicel. Enzymatic activities degrading Avicel, carboxymethyl cellulose, and cellobiose were found both in the culture supernatant and in association with the mycelium and crystalline substrate. The bound enzymes were efficiently solubilized by repeated washes with buffer of low ionic strength (50 mM Tris hydrochloride [pH 7.5]) and further purified by fast protein liquid chromatography. A high-molecular-weight Avicelase of >300 kilodaltons could be separated from carboxymethyl cellulase (CMCase) and β-glucosidase activities (molecular mass, 40 to 50 kilodaltons) by gel filtration on Superose 12. The CMCase fraction was resolved by Mono Q anion-exchange chromatography into two enzymes designated CMCase 1 and CMCase 2. The β-glucosidase activity was found to copurify with CMCase 2. The purified cellulase components showed optimal activity at around pH 7.0 and temperatures of between 45 and 50°C. Avicelase (but not CMCase) activity was stimulated significantly by the addition of CaCl₂.     

A Pyruvated Mannose-Specific Xanthan Lyase Involved in Xanthan Degradation by Paenibacillus alginolyticus XL-1

The xanthan-degrading bacterium Paenibacillus alginolyticus XL-1, isolated from soil, degrades approximately 28% of the xanthan molecule and appears to leave the backbone intact. Several xanthan-degrading enzymes were excreted during growth on xanthan, including xanthan lyase. Xanthan lyase production was induced by xanthan and inhibited by glucose and low-molecular-weight enzymatic degradation products from xanthan. A xanthan lyase with a molecular mass of 85 kDa and a pI of 7.9 was purified and characterized. The enzyme is specific for pyruvated mannosyl side chain residues and optimally active at pH 6.0 and 55°C.     

pH-Dependent interaction between sodium caseinate and xanthan gum

Xanthan gum and sodium caseinate are used to improve stability and texture of food. To investigate interactions between them, the effects of pH on structure of sodium caseinate–xanthan gum complex were analyzed. HCl titration showed that the absorbance of the mixture was different from that of sodium caseinate alone throughout the acidification, and that syneresis in the mixture was delayed in acidic pH. Rennet digestion clarified that xanthan gum retarded degradation of κ-casein at pH 2.7. Atomic force microscopy revealed that xanthan gum interaction with sodium caseinate was pH-dependent. Sodium caseinate particles were individually bound with xanthan gum at pH 6.6, and a side-by-side aggregation of sodium caseinate along xanthan gum was observed at pH 4.2. The mixture formed a network composed of rod-like fibers at pH 2.7. These results indicate that hydrophobic and electrostatic interactions play a role in the complex formation at neutral and acidic pH, respectively.     

Biodegradation of xanthan by salt-tolerant aerobic microorganisms

Summary Three salt-tolerant bacteria which degraded xanthan were isolated from various water and soil samples collected from New Jersey, Illinois, and Louisiana. The mixed culture, HD1, contained aBacillus sp. which produced an inducible enzyme(s) having the highest extracellular xanthan-degrading activity found. Xanthan alone induced the observed xanthan-degrading activity. The optimum pH and temperature for cell growth were 5–7 and 30–35°C, respectively. The optimum temperature for activity of the xanthan-degrading enzyme(s) was 35–45°C, slightly higher than the optimum growth temperature. With a cell-free enzyme preparation, the optimum pH for the reduction of solution viscosity and for the release of reducing sugar groups were different (5 and 6, respectively), suggesting the involvement of more than one enzyme for these two reactions. Products of enzymatic xanthan degradation were identified as glucose, glucuronic acid, mannose, pyruvated mannose, acetylated mannose and unidentified oligo- and polysaccharides. The weight average molecular weight of xanthan samples shifted from 6.5·10⁶ down to 6.0·10⁴ during 18 h of incubation with the cell-free crude enzymes. The activity of the xanthan-degrading enzyme(s) was not influenced by the presence or absence of air or by the presence of Na₂S₂O₄ and low levels of biocides such as formaldehyde (25 ppm) and 2,2-dibromo-3-nitrilopropionamide (10 ppm). Formaldehyde at 50 ppm effectively inhibited growth of the xanthan degraders.     

Valorisation of chicken feathers for xanthan gum production using Xanthomonas campestris MO-03

Xanthan gum is an important commercial polysaccharide produced by Xanthomonas species. In this study, xanthan production was investigated using a local isolate of Xanthomonas campestris MO-03 in medium containing various concentrations of chicken feather peptone (CFP) as an enhancer substrate. CFP was produced with a chemical process and its chemical composition was determined. The addition of CFP (1–8?g/l) increased the conversion of sugar to xanthan gum in comparison with the control medium, which did not contain additional supplements. The highest xanthan production (24.45?g/l) was found at the 6?g/l CFP containing control medium in 54?h. This value was 1.73 fold higher than that of control medium (14.12?g/l). Moreover, addition of CFP improved the composition of xanthan gum; the pyruvate content of xanthan was 3.86% (w/w), higher than that of the control (2.2%, w/w). The xanthan gum yield was also influenced by the type of organic nitrogen sources. As a conclusion, CFP was found to be a suitable substrate for xanthan gum production.     

Purification and Characterization of a Keratinase from a Feather-Degrading Bacillus licheniformis Strain

A keratinase was isolated from the culture medium of feather-degrading Bacillus licheniformis PWD-1 by use of an assay of the hydrolysis of azokeratin. Membrane ultrafiltration and carboxymethyl cellulose ion-exchange and Sephadex G-75 gel chromatographies were used to purify the enzyme. The specific activity of the purified keratinase relative to that in the original medium was approximately 70-fold. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis and Sephadex G-75 chromatography indicated that the purified keratinase is monomeric and has a molecular mass of 33 kDa. The optimum pH and the pI were determined to be 7.5 and 7.25, respectively. Under standard assay conditions, the apparent temperature optimum was 50°C. The enzyme is stable when stored at −20°C. The purified keratinase hydrolyzes a broad range of substrates and displays higher proteolytic activity than most proteases. In practical applications, keratinase is a useful enzyme for promoting the hydrolysis of feather keratin and improving the digestibility of feather meal.     

XCCNAU-92生产黄原胶的工业发酵培养基成份

ＸＣＣＮＡＵ－９２生产黄原胶的工业发酵培养基成份是：蔗糖、玉米淀粉、氮源Ｘ、鱼粉、ＣａＣＯ３、ＭｇＳＯ４、Ｋ２ＨＰＯ４。适宜的Ｃ／Ｎ是：蔗糖（玉米淀粉）／氮源Ｘ＝６０．０／１．０,蔗糖（玉米淀粉）／鱼粉＝６０．０／１０．０。ＣａＣＯ３、ＭｇＳＯ４对ＸＣＣＮＡＵ－９２合成黄原胶有明显促进作用,Ｋ２ＨＰＯ４在发酵过程中使ｐＨ保持稳定,Ｍｎ２＋、Ｚｎ２＋、Ｆｅ３＋、柠檬酸和谷氨酸对生产黄原胶无促进作用。     

Purification and characterization of a pyruvated-mannose-specific xanthan lyase from heat-stable, salt-tolerant bacteria

A xanthanase complex secreted by a consortium of heat-stable, salt-tolerant bacteria includes a lyase that specifically removes terminal pyruvated beta-d-mannose residues from the side chains of xanthan gum. The enzyme was purified to homogeneity from the culture broth following ion-exchange chromatography and gel permeation chromatography. It consists of a single subunit of molecular weight 33,000. The enzyme is stable to 55 degrees C for more than 6 h in 20 mM sodium phosphate buffer (pH 5.0) containing 0.25 M NaCl. Optimal enzyme activity was observed at 0.05 M NaCl and a pH of 5. The enzyme has a pI of 3.7. It does not remove unsubstituted terminal beta-d-mannose residues from xanthan side chains nor does it hydrolyze p-nitrophenyl-beta-d-mannose. Treatment of xanthan with purified lyase results in a polysaccharide containing side chains terminating in an unsaturated 4,5-ene-glucuronic acid.     

Modification of microstructure and selected physicochemical properties of bacterial cellulose produced by bacterial isolate using hydrocolloid-fortified Hestrin–Schramm medium

Bacterial cellulose (BC) is a biopolymer with applications in numerous industries such as food and pharmaceutical sectors. In this study, various hydrocolloids including modified starches (oxidized starch—1404 and hydroxypropyl starch—1440), locust bean gum, xanthan gum (XG), guar gum, and carboxymethyl cellulose were added to the Hestrin-Schramm medium to improve the production performance and microstructure of BC by Gluconacetobacter entanii isolated from coconut water. After 14-day fermentation, medium supplemented with 0.1% carboxymethyl cellulose and 0.1% XG resulted in the highest BC yield with dry BC content of 9.82 and 6.06 g/L, respectively. In addition, scanning electron microscopy showed that all modified films have the characteristic three-dimensional network of cellulose nanofibers with dense structure and low porosity as well as larger fiber size compared to control. X-ray diffraction indicated that BC fortified with carboxymethyl cellulose exhibited lower crystallinity while Fourier infrared spectroscopy showed characteristic peaks of both control and modified BC films.     

Formulation variables affecting drug release from xanthan gum matrices at laboratory scale and pilot scale

The purpose of this research was to study processing variables at the laboratory and pilot scales that can affect hydration rates of xanthan gum matrices containing diclofenac sodium and the rate of drug release. Tablets from the laboratory scale and pilot scale proceedings were made by wet granulation. Swelling indices of xanthan gum formulations prepared with different amounts of water were measured in water under a magnifying lens. Granules were thermally treated in an oven at 60°C, 70°C, and 80°C to studythe effects of elevated temperatures on drug release from xanthan gum matrices. Granules from the pilot scale formulations were bulkier compared to their laboratory scale counterparts, resulting in more porous, softer tablets. Drug release was linear from xanthan gum matrices prepared at the laboratory scale and pilot scales, however, release was faster from the pilot scales. Thermal treatment of the granules did not affect the swelling index and rate of drug release from tablets in both the pilot and laboratory scale proceedings. On the other hand, the release from both proceedings was affected by the amount of water used for granulation and the speed of the impeller during granulation. The data suggest that processing variables that affect the degree of wetness during granulation, such as increase in impeller speed and increase in amount of water used for granulation, also may affect the swelling index of xanthan gum matrices and therefore the rate of drug release.     

TEMPO-mediated selective oxidation of substituted polysaccharides--an efficient approach for the determination of the degree of substitution at C-6

2,2,6,6-Tetramethyl-1-piperidinyloxy radical (TEMPO)-mediated oxidations of substituted polysaccharides were studied at pH 10.2 and at a temperature of 0 °C with NaOCl as the oxidant. The reaction is highly selective, and it was shown that the oxidation can proceed to a yield of nearly 100%. The oxidation process was investigated for several substituted polysaccharides, especially for a series of hydroxypropyl guar gums with different molar degrees of substitution. It was shown that this oxidation can be used for the determination of the degree of substitution at C-6 of the polysaccharide by comparing the difference in oxidation yield between substituted and natural polysaccharides. Studies on several hydroxypropyl guar gums showed that the degrees of substitution at C-6—for MS of 0.08, 0.34, 0.62, and 1.08—are 0.06, 0.24, 0.40, and 0.44, respectively. The results were extended to other polysaccharides such as carboxymethyl cellulose, cationic guar gum, carboxymethyl pullulan, and methyl cellulose. It can be concluded that the TEMPO-mediated oxidation is a useful method for the determination of the DS at the substituted C-6 position for different kinds of modified polysaccharides.     

Bacteroides xylanolyticus sp. nov., a xylanolytic bacterium from methane producing cattle manure

As part of a study of the biogas production from cattle waste, xylanolytic bacteria were isolated from enrichments of fermenting cattle manure. From 34 isolates, mostly Gram-negative rods, a typical strain was investigated in more detail. It was an anaerobic non-sporeforming, Gramnegative rod, which was motile with peritrichous flagella. This organism fermented xylan and many soluble sugars (glucose, cellobiose, mannose, xylose, arabinose). Other hemicelluloses such as gum xanthan, laminaran, locust bean gum, and gum arabic were not utilized. It also could not use cellulose. Fermentation products were carbon dioxide, hydrogen, acetate and ethanol. The bacterium produced carboxymethylcellulase and xylanase, especially when growing on xylan. Growth was optimal between 25°C and 40°C and between pH 6.5 and 7.5. The guanine plus cytosine content of the DNA was 34.8±0.8%. The isolate was identified as a member of the genus Bacteroides, and a new species is proposed: Bacteroides xylanolyticus (xylan dissolving). The type strain of B. xylanolyticus is strain X5-1 (DSM 3808).     

Purification and properties of an extracellular endo-1,4-β-glucanase fromLenzites trabea

An extracellular endo-1,4--glucanase (EC 3.2.1.4) has been isolated and purified from the culture solution of the basidiomyceteLenzites trabea grown on glucose and cellulose. Besides-glucosidase activity (EC 3.2.1.21) no evidence for C₁-activity (EC 3.2.1.91) in the culture solution was found.The endoglucanase has been purified in a four-step procedure including chromatography on Sepharose 6-B and DEAE-Sephadex A-50, adsorption on hydroxylapatite and gel filtration on Bio-Gel P-100. The enzyme showed maximum activity at pH 4.4 and 70°C. A molecular weight of 29000 Daltons was estimated by calibration on Bio-Gel P-100. The enzyme hydrolyses carboxymethyl cellulose (CMC) as well as xylan.List of Abbreviations CMC carboxymethyl cellulose - D.S. degree of substitution - D.P. degree of polymerisation - MW molecular weight     

Chemoenzymatic synthesis and hydrogelation of amylose-grafted xanthan gums

This paper reports the chemoenzymatic synthesis of an amylose-grafted xanthan gum. An amine-functionalized maltooligosaccharide was chemically introduced to xanthan gum by condensation with its carboxylates using a condensing agent to produce a maltooligosaccharide-grafted xanthan gum. Then, a phosphorylase-catalyzed enzymatic polymerization of glucose 1-phosphate from the graft chain ends on the xanthan gum derivative was performed, giving an amylose-grafted xanthan gum. Furthermore, the product formed a gel with an ionic liquid, which was converted into a hydrogel with high water content by replacement of the ionic liquid with water. The ionically cross-linked hydrogel was also provided by soaking the primary formed hydrogel in FeCl₃ aqueous solution. The mechanical properties of the resulting hydrogels were evaluated by compressive testing.     

Yield stress components of waxy corn starch–xanthan mixtures: Effect of xanthan concentration and different starches

Yield stress of 6% (w/w) waxy maize (WXM), cross-linked waxy maize (CLWM), and cold water swelling (CWS) starches in xanthan gum dispersions: 0%, 0.35%, 0.50%, 0.70%, and 1.0% was measured with the vane method at an apparent shear rate of 0.05 s⁻¹. The intrinsic viscosity of the xanthan gum was determined to be: 112.3 dL/g in distilled water at 25 °C. Values of the static (σ_0s) and dynamic (σ_0d) yield stress of each dispersion were measured before and after breaking down its structure under continuous shear, respectively. The WXM and CWS starches exhibited synergistic behavior, whereas the CLWM starch showed antagonistic effect with xanthan gum. The difference (σ_0s − σ_0d) was the stress required to break the inter-particle bonding (σ_b). The contributions of the viscous (σ_v) and network (σ_n) components were estimated from an energy balance model. In general, values of σ_b of the starch–xanthan gum dispersions decreased and those of σ_n increased with increase in xanthan gum concentration.     

Production of a cellulase-free xylanase from agricultural waste materials by a thermotolerant Streptomyces sp.

1444 microorganisms were isolated from soil samples from the northern Thai and screened at 55 °C by using basal medium supplemented with 1% carboxymethyl cellulose as a sole carbon source. One isolate, Streptomyces Ab106, had a high activity of a cellulase-free xylanase also without mannanase activity. The maximum cellulase-free xylanase activities of 3.5, 3.3, 3.1 and 2.7 IU were after growth of the organism with 1% (w/v) corn hull, corncob, bagasse and oat spelt xylan, respectively, at 55 °C for 6 days, respectively. The activity was more than 5 times higher than that at 35 °C.     

Entrapment of biological control agents applied to entomopathogenic nematodes

Summary Hydrogels of alginate, phospho guar gum, carboxymethyl guar gum, k-carrageenan and cellulose sulphate, respectively were tested to find easily redissolvable gels. The entomopathogenic nematode, Heterorhabditis sp., was entrapped in calcium alginate beads, calcium alginate hollow spheres and foils made from different hydrogels. Emigration from calcium alginate beads after 7 days of storage was 100 % at room temperature and was lowered to 6 % at 6 °C, whereas no emigration from calcium alginate hollow spheres was found at either temperature. Highly concentrated polymer foils produced on gauze showed reduced emigration with a survival of 80 % after 24 h compared to foils produced on glass slides. Calcium alginate beads can be used for a controlled release of the nematode into the environment, while hollow spheres and foils are suitable for storage.Dedicated to Prof. Dr. F. Wagner on the occasion of his 65th birthday