Proteomic identification of CBM37-containing cellulases produced by the rumen cellulolytic bacterium <Emphasis Type="Italic">Ruminococcus albus</Emphasis> 20 and their putative involvement in bacterial adhesion to cellulose

The objective of this study was to identify and characterize other proteins than fimbrial proteins potentially involved in R. albus 20 adhesion to cellulose using an adhesion-related antiserum preparation (i.e. anti-Adh serum). From protein fractions of R. albus 20 grown on cellulose, the serum recognized at least 10 cellulose-binding proteins (CBPs), among which homologs of glycoside hydrolases (family 5, 9 and 48) of R. albus 8 (i.e. Cel5G, Cel9B and Cel48A) were identified by a proteomic approach. In strain 20, Cel9B and Cel48A were identified as two major CBPs and as bacterial cell-associated proteins. The anti-Adh serum was also shown to target the C-terminal family 37 carbohydrate-binding module (CBM37) of Cel9B and Cel48A, indicating that this module, unique to R. albus, may play a significant role in bacterial adhesion to cellulose as suggested previously for R. albus 8. Overall, our results support the hypothesis of an adhesion mechanism involving the CBM37 of Cel9B and Cel48A. This adhesion mechanism may not be restricted to these two enzymes but may also involve other CBM37-containing proteins such as Cel5G and the other uncharacterised proteins recognized by the anti-Adh serum. The EMBL accession numbers for the sequences reported in this paper are FM872295 for Cel9B and FM872296 for Cel48A.     

Mechanism of initial rapid rate retardation in cellobiohydrolase catalyzed cellulose hydrolysis

Despite intensive research, the mechanism of the rapid retardation in the rates of cellobiohydrolase (CBH) catalyzed cellulose hydrolysis is still not clear. Interpretation of the hydrolysis data has been complicated by the inability to measure the catalytic constants for CBH‐s acting on cellulose. We developed a method for measuring the observed catalytic constant (k^obs) for CBH catalyzed cellulose hydrolysis. It relies on in situ measurement of the concentration of CBH with the active site occupied by the cellulose chain. For that we followed the specific inhibition of the hydrolysis of para‐nitrophenyl‐β‐D ‐lactoside by cellulose. The method was applied to CBH‐s TrCel7A from Trichoderma reesei and PcCel7D from Phanerochaete chrysosporium and their isolated catalytic domains. Bacterial microcrystalline cellulose, Avicel, amorphous cellulose, and lignocellulose were used as substrates. A rapid decrease of k^obs in time was observed on all substrates. The k^obs values for PcCel7D were about 1.5 times higher than those for TrCel7A. In case of both TrCel7A and PcCel7D, the k^obs values for catalytic domains were similar to those for intact enzymes. A model where CBH action is limited by the average length of obstacle‐free way on cellulose chain is proposed. Once formed, productive CBH–cellulose complex proceeds with a constant rate determined by the true catalytic constant. After encountering an obstacle CBH will “get stuck” and the rate of further cellulose hydrolysis will be governed by the dissociation rate constant (k_off), which is low for processive CBH‐s. Biotechnol. Bioeng. 2010;106: 871–883. © 2010 Wiley Periodicals, Inc.     

Molecular Cloning of Novel Cellulase Genes <Emphasis Type="Italic">cel</Emphasis>9A and <Emphasis Type="Italic">cel</Emphasis>12A from <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> GXN151 and Synergism of Their Encoded Polypeptides

A thermophilic bacterial strain GXN151 which could degrade Avicel efficiently was isolated and identified as Bacillus licheniformis. A genomic library of GXN151 was constructed and two novel endoglucanase genes designated cel9A and cel12A were isolated by screening the library on carboxylmethyl cellulase indicator plates. The analysis of amino acid sequences deduced from the genes indicated that Cel9A consisted of a catalytic domain belonging to glycosyl hydrolase family 9, a linker domain, and a carbohydrate binding module family 3 from N-terminal to C-terminal; Cel12A had only one catalytic domain belonging to glycosyl hydrolase family 12. The combinations of Cel9A and Cel12A produced by the recombinant E. coli exhibited synergistic action against substrates of carboxylmethyl cellulose as well as Avicel.     

Dockerin‐containing protease inhibitor protects key cellulosomal cellulases from proteolysis in Clostridium cellulolyticum

Cellulosomes are key for lignocellulosic biomass degradation in cellulolytic Clostridia. Better understanding of the mechanism of cellulosome regulation would allow us to improve lignocellulose hydrolysis. It is hypothesized that cellulosomal protease inhibitors would regulate cellulosome architecture and then lignocellulose hydrolysis. Here, a dockerin‐containing protease inhibitor gene (dpi) in Clostridium cellulolyticum H10 was characterized by mutagenesis and physiological analyses. The dpi mutant had a decreased cell yield on glucose, cellulose and xylan, lower cellulose utilization efficiency, and a 70% and 52% decrease of the key cellulosomal components, Cel48F and Cel9E respectively. The decreased cellulolysis is caused by the proteolysis of major cellulosomal components, such as Cel48F and Cel9E. Disruption of cel9E severely impaired cell growth on cellulose while loss of cel48F completely abolished cellulolytic activity. These observations are due to the combinational results of gene inactivation and polar effects caused by intron insertion. Purified recombinant Dpi showed inhibitory activity against cysteine protease. Taken together, Dpi protects key cellulosomal cellulases from proteolysis in H10. This study identified the physiological importance of cellulosome‐localized protease inhibitors in Clostridia.     

Cloning and characterization of a thermostable and halo-tolerant endoglucanase from <Emphasis Type="Italic">Thermoanaerobacter tengcongensis</Emphasis> MB4

A β-1,4-endoglucanase (Cel5A) was cloned from the genomic DNA of saccharolytic thermophilic eubacterium Thermoanaerobacter tengcongensis MB4 and functionally expressed in Escherichia coli. Substrate specificity analysis revealed that Cel5A cleaves specifically the β-1,4-glycosidic linkage in cellulose with high activity (294 U mg⁻¹; carboxymethyl cellulose sodium (CMC)). On CMC, kinetics of Cel5A was determined (K _m 1.39 ± 0.12 g l⁻¹; k _cat/K _m 1.41 ± 0.13 g⁻¹ s⁻¹). Cel5A displays an activity optimum between 75 and 80 °C. Residues Glu187 and Glu289 were identified as key catalytic amino acids by sequence alignment. Interestingly, derived from a non-halophilic bacterium, Cel5A exhibits high residual activities in molar concentration of NaCl (3 M, 49.3%) and KCl (4 M, 48.6%). In 1 M NaCl, 82% of Cel5A activity is retained after 24 h incubation. Molecular Dynamics studies performed at 0 and 3 M NaCl, correlate the Cel5A stability to the formation of R-COO⁻···Na⁺ ···⁻OOC-R salt bridges within the Cel5A tertiary structure, while activity possibly relates to the number of Na⁺ ions trapped into the negatively charged active site, involving a competition mechanism between substrate and Na⁺. Additionally, Cel5A is remarkably resistant in ionic liquids 1-butyl-3-methyllimidazolium chloride (1 M, 54.4%) and 1-allyl-3-methylimidazolium chloride (1 M, 65.1%) which are promising solvents for cellulose degradation and making Cel5A an attractive candidate for industrial applications.     

Hydrolysis of cellulose in synergistic mixtures of β-glucosidase and endo/exocellulase Cel9A from <Emphasis Type="Italic">Thermobifida fusca</Emphasis>

The synergism between the endo/exocellulase, Cel9A, and β-glucosidase (βgl) of Thermobifida fusca was investigated. Wild type βgl or S319C, a βgl mutant with significantly improved cellobiase activity, were added to Cel9A. Both wild type and mutant βgl enhanced the Cel9A hydrolysis of carboxymethyl cellulose (CMC) and filter paper by 50–100% compared to Cel9A alone. No enhancement occurred with addition of E388A, an inactive form of βgl. HPLC analysis showed that, with Cel9A alone, the resulting hydrolysate of glucose and cellobiose contained about half glucose; after addition of equimolar amounts of either wild type βgl or mutant S319C to Cel9A, the hydrolysate contained more than 85% glucose. βgl thus acted synergistically with Cel9A by converting cello-oligomers to glucose; this reduced the soluble sugar accumulation during hydrolysis of cellulose.     

Heterologous co-production of <Emphasis Type="Italic">Thermobifida fusca</Emphasis> Cel9A with other cellulases in <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

The processive endoglucanase Cel9A of the moderately thermophilic actinomycete Thermobifida fusca was functionally produced in Saccharomyces cerevisiae. Recombinant Cel9A displayed activity on both soluble (carboxymethylcellulose) and insoluble (Avicel) cellulose substrates confirming its processive endoglucanase activity. High-performance anionic exchange chromatography analyses of soluble sugars released from Avicel revealed a cellobiose/glucose ratio of 2.5 ± 0.1. Growth by the recombinant strain on amorphous cellulose was possible due to the sufficient amount of glucose cleaved from the cellulose chain. This is the first confirmed report of S. cerevisiae growing on a cellulosic substrate as sole carbohydrate source while only expressing one recombinant gene. To improve the cellulolytic capability of S. cerevisiae and to investigate the level of synergy among cellulases produced by a recombinant host, the cel9A gene was co-expressed with four cellulase-coding genes of Trichoderma reesei: two endoglucanases cel5A (egII) and cel7B (egI), and two cellobiohydrolases cel6A (cbhII) and cel7A (cbhI). Synergy, especially between the Cel9A and the two cellobiohydrolases, resulted in a higher cellulolytic capability of the recombinant host.     

Thermobifida fusca family-6 cellulases as potential designer cellulosome components

During the course of our studies on the structure–function relationship of cellulosomes, we were interested in converting the free cellulase system of the aerobic bacterium, Thermobifida fusca, to a cellulosomal system. For this purpose, the cellulose-binding modules (CBM) of two T. fusca family-6 cellulases, endoglucanase Cel6A and exoglucanase Cel6B, were replaced by divergent dockerin modules. Thus far, family-6 cellulases have not been shown to be members of natural cellulosome systems. The resultant chimaeric proteins, 6A-c and t-6B, respectively, were purified and found to interact specifically and stoichiometrically with their corresponding cohesin modules, indicating their suitability for use as components in ‘designer cellulosomes’. Both chimaeric enzymes showed somewhat decreased but measurable levels of activity on carboxymethyl cellulose, consistent with the known endo- and exo-glucanase character of the parent enzymes. The activity of 6A-c on phosphoric acid swollen cellulose was also consistent with that of the wild-type endoglucanase Cel6A. The startling finding of the present research was the extent of degradation of this substrate by the chimaeric enzyme t-6B. Wild-type exoglucanase Cel6B exhibited very low activity on this substrate, while the specific activity of t-6B was 14-fold higher than the parent enzyme.     

A bacterial GH6 cellobiohydrolase with a novel modular structure

Cel6D from Paenibacillus barcinonensis is a modular cellobiohydrolase with a novel molecular architecture among glycosyl hydrolases of family 6. It contains an N-terminal catalytic domain (family 6 of glycosyl hydrolases (GH6)), followed by a fibronectin III-like domain repeat (Fn3_1,2) and a C-terminal family 3b cellulose-binding domain (CBM3b). The enzyme has been identified and purified showing catalytic activity on cellulosic substrates and cellodextrins, with a marked preference for phosphoric acid swollen cellulose (PASC). Analysis of mode of action of Cel6D shows that it releases cellobiose as the only hydrolysis product from cellulose. Kinetic parameters were determined on PASC showing a K _m of 68.73 mg/ml and a V _max of 1.73 U/mg. A series of truncated derivatives of Cel6D have been constructed and characterized. Deletion of CBM3b caused a notable reduction in hydrolytic activity, while deletion of the Fn3 domain abolished activity, as the isolated GH6 domain was not active on any of the substrates tested. Mutant enzymes Cel6D-D146A and Cel6D-D97A were constructed in the residues corresponding to the putative acid catalyst and to the network for the nucleophilic attack. The lack of activity of the mutant enzymes indicates the important role of these residues in catalysis. Analysis of cooperative activity of Cel6D with cellulases from the same producing P. barcinonensis strain reveals high synergistic activity with processive endoglucanase Cel9B on hydrolysis of crystalline substrates. The characterized cellobiohydrolase can be a good contribution for depolymerization of cellulosic substrates and for the deconstruction of native cellulose.

     

Alleviating product inhibition in cellulase enzyme Cel7A

Enzymes that degrade cellulose into glucose are one of the most expensive components of processes for converting cellulosic biomass to fuels and chemicals. Cellulase enzyme Cel7A is the most abundant enzyme naturally employed by fungi to depolymerize cellulose, and like other cellulases is inhibited by its product, cellobiose. There is thus great economic incentive for minimizing the detrimental effects of product inhibition on Cel7A. In this work, we experimentally generated 10 previously proposed site‐directed mutant Cel7A enzymes expected to have reduced cellobiose binding energies (the majority of mutations were to alanine). We then tested their resilience to cellobiose as well as their hydrolytic activities on microcrystalline cellulose. Although every mutation tested conferred reduced product inhibition (and abolished it for some), our results confirm a trade‐off between Cel7A tolerance to cellobiose and enzymatic activity: Reduced product inhibition was accompanied by lower overall enzymatic activity on crystalline cellulose for the mutants tested. The tempering effect of mutations on inhibition was nearly constant despite relatively large differences in activities of the mutants. Our work identifies an amino acid in the Cel7A product binding site of interest for further mutational studies, and highlights both the challenge and the opportunity of enzyme engineering toward improving product tolerance in Cel7A. Biotechnol. Bioeng. 2016;113: 330–338. © 2015 The Authors. Biotechnology and Bioengineering Published by Wiley Periodicals, Inc.     

Reversibility and binding kinetics of Thermobifida fusca cellulases studied through fluorescence recovery after photobleaching microscopy

Cellulases are enzymes capable of depolymerizing cellulose. Understanding their interactions with cellulose can improve biomass saccharification and enzyme recycling in biofuel production. This paper presents a study on binding and binding reversibility of Thermobifida fusca cellulases Cel5A, Cel6B, and Cel9A bound onto Bacterial Microcrystalline Cellulose. Cellulase binding was assessed through fluorescence recovery after photobleaching (FRAP) at 23, 34, and 45 °C. It was found that cellulase binding is only partially reversible. For processive cellulases Cel6B and Cel9A, an increase in temperature resulted in a decrease of the fraction of cellulases reversibly bound, while for endocellulase Cel5A this fraction remained constant. Kinetic parameters were obtained by fitting the FRAP curves to a binding-dominated model. The unbinding rate constants obtained for all temperatures were highest for Cel5A and lowest for Cel9A. The results presented demonstrate the usefulness of FRAP to access the fast binding kinetics characteristic of cellulases operating at their optimal temperature.     

Improving the thermostability and activity of Melanocarpus albomyces cellobiohydrolase Cel7B

Two different types of approach were taken to improve the hydrolytic activity towards crystalline cellulose at elevated temperatures of Melanocarpus albomyces Cel7B (Ma Cel7B), a single-module GH-7 family cellobiohydrolase. Structure-guided protein engineering was used to introduce an additional tenth disulphide bridge to the Ma Cel7B catalytic module. In addition, a fusion protein was constructed by linking a cellulose-binding module (CBM) and a linker from the Trichoderma reesei Cel7A to the C terminus of Ma Cel7B. Both approaches proved successful. The disulphide bridge mutation G4C/M70C located near the N terminus, close to the entrance of the active site tunnel of Ma Cel7B, led to improved thermostability (ΔT _m = 2.5°C). By adding the earlier found thermostability-increasing mutation S290T (ΔT _m = 1.5°C) together with the disulphide bridge mutation, the unfolding temperature was increased by 4°C (mutant G4C/M70C/S290T) compared to that of the wild-type enzyme, thus showing an additive effect on thermostability. Both disulphide mutants had increased activity towards microcrystalline cellulose (Avicel) at 75°C, apparently solely because of their improved thermostability. The addition of a CBM also improved the thermostability (ΔT _m = 2.5°C) and caused a clear (sevenfold) increase in the hydrolysis activity of Ma Cel7B towards Avicel at 70°C.     

A Family 2a Carbohydrate-Binding Module Suitable as an Affinity Tag for Proteins Produced in Pichia pastoris

The family 2a carbohydrate-binding module (CBM), Cel5ACBM2a, from the C-terminus of Cel5A from Cellulomonas fimi, and Xyn10ACBM2a, the family 2a CBM from the C-terminus of Xyn10A from C. fimi, were compared as fusion partners for proteins produced in the methylotrophic yeast Pichia pastoris. Gene fusions of murine stem-cell factor (SCF) with both CBMs were expressed in P. pastoris. The secreted SCF-Xyn10ACBM2a polypeptides were highly glycosylated and bound poorly to cellulose. In contrast, fusion of SCF to Cel5ACBM2a, which lacks potential N-linked glycosylation sites, resulted in the production of polypeptides which bound tightly to cellulose. Cloning and expression of these CBM2a in P. pastoris without a fusion partner confirmed that N-linked glycosylation at several sites was responsible for the poor cellulose binding. The nonglycosylated CBMs produced in E. coli had very similar cellulose-binding properties.     

Effect of pH and temperature on the global compactness, structure, and activity of cellobiohydrolase Cel7A from Trichoderma harzianum

Due to its elevated cellulolytic activity, the filamentous fungus Trichoderma harzianum (T. harzianum) has considerable potential in biomass hydrolysis application. Cellulases from Trichoderma reesei have been widely used in studies of cellulose breakdown. However, cellulases from T. harzianum are less-studied enzymes that have not been characterized biophysically and biochemically as yet. Here, we examined the effects of pH and temperature on the secondary and tertiary structures, compactness, and enzymatic activity of cellobiohydrolase Cel7A from T. harzianum (Th Cel7A) using a number of biophysical and biochemical techniques. Our results show that pH and temperature perturbations affect Th Cel7A stability by two different mechanisms. Variations in pH modify protonation of the enzyme residues, directly affecting its activity, while leading to structural destabilization only at extreme pH limits. Temperature, on the other hand, has direct influence on mobility, fold, and compactness of the enzyme, causing unfolding of Th Cel7A just above the optimum temperature limit. Finally, we demonstrated that incubation with cellobiose, the product of the reaction and a competitive inhibitor, significantly increased the thermal stability of Th Cel7A. Our studies might provide insights into understanding, at a molecular level, the interplay between structure and activity of Th Cel7A at different pH and temperature conditions.     

Binding and Movement of Individual Cel7A Cellobiohydrolases on Crystalline Cellulose Surfaces Revealed by Single-molecule Fluorescence Imaging

The efficient catalytic conversion of biomass to bioenergy would meet a large portion of energy requirements in the near future. A crucial step in this process is the enzyme-catalyzed hydrolysis of cellulose to glucose that is then converted into fuel such as ethanol by fermentation. Here we use single-molecule fluorescence imaging to directly monitor the movement of individual Cel7A cellobiohydrolases from Trichoderma reesei (TrCel7A) on the surface of insoluble cellulose fibrils to elucidate molecular level details of cellulase activity. The motion of multiple, individual TrCel7A cellobiohydrolases was simultaneously recorded with ∼15-nm spatial resolution. Time-resolved localization microscopy provides insights on the activity of TrCel7A on cellulose and informs on nonproductive binding and diffusion. We measured single-molecule residency time distributions of TrCel7A bound to cellulose both in the presence of and absence of cellobiose the major product and a potent inhibitor of Cel7A activity. Combining these results with a kinetic model of TrCel7A binding provides microscopic insight into interactions between TrCel7A and the cellulose substrate.     

Cloning and functional characterization of a novel endo-β-1,4-glucanase gene from a soil-derived metagenomic library

A metagenomic library consisting of 3,024 bacterial artificial chromosome clones was prepared in Escherichia coli DH10B with high-molecular-weight DNA extracted from red soil in South China. A novel cellulase gene with an open reading frame of 1,332 bp, cel5G, encoding an endo-β-1,4-glucanase was cloned using an activity-based screen. The deduced enzyme, Cel5G, belongs to the glycosyl hydrolase family 5 and shares <39% identity with endoglucanases in the GenBank database. cel5G was expressed in E. coli BL21, and the recombinant enzyme Cel5G was purified to homogeneity for enzymatic analysis. Cel5G hydrolyzed a wide range of β-1,4-, β-1,3/β-1,4-, or β-1,3/β-1,6-linked polysaccharides, amorphous cellulose, filter paper, and microcrystalline cellulose. Its highest activity was in 50 mM citrate buffer, pH 4.8, at 50°C. Cel5G is stable over a wide range of pH values (from 2.0 to 10.6) and is thermally stable under 60°C. It is highly tolerant and active in high salt concentrations and is stable in the presence of pepsin and pancreatin. The K _m and V _max values of Cel5G for carboxymethyl cellulose are 19.92 mg/ml and 1,941 μmol min⁻¹ mg⁻¹, respectively. These characteristics indicate that Cel5G has potential for industrial use.     

Engineering of Family-5 Glycoside Hydrolase (Cel5A) from an Uncultured Bacterium for Efficient Hydrolysis of Cellulosic Substrates

Cel5A, an endoglucanase, was derived from the metagenomic library of vermicompost. The deduced amino acid sequence of Cel5A shows high sequence homology with family-5 glycoside hydrolases, which contain a single catalytic domain but no distinct cellulose-binding domain. Random mutagenesis and cellulose-binding module (CBM) fusion approaches were successfully applied to obtain properties required for cellulose hydrolysis. After two rounds of error-prone PCR and screening of 3,000 mutants, amino acid substitutions were identified at various positions in thermotolerant mutants. The most heat-tolerant mutant, Cel5A_2R2, showed a 7-fold increase in thermostability. To enhance the affinity and hydrolytic activity of Cel5A on cellulose substrates, the family-6 CBM from Saccharophagus degradans was fused to the C-terminus of the Cel5A_2R2 mutant using overlap PCR. The Cel5A_2R2-CBM6 fusion protein showed 7-fold higher activity than the native Cel5A on Avicel and filter paper. Cellobiose was a major product obtained from the hydrolysis of cellulosic substrates by the fusion enzyme, which was identified by using thin layer chromatography analysis.     

Identification and characterization of novel cellulolytic and hemicellulolytic genes and enzymes derived from German grassland soil metagenomes

Soil metagenomes represent an unlimited resource for the discovery of novel biocatalysts from soil microorganisms. Three large-inserts metagenomic DNA libraries were constructed from different grassland soil samples and screened for genes conferring cellulase or xylanase activity. Function-driven screening identified a novel cellulase-encoding gene (cel01) and two xylanase-encoding genes (xyn01 and xyn02). From sequence and protein domain analyses, Cel01 (831 amino acids) belongs to glycoside hydrolase family 9 whereas Xyn01 (170 amino acids) and Xyn02 (255 amino acids) are members of glycoside hydrolase family 11. Cel01 harbors a family 9 carbohydrate-binding module, previously found only in xylanases. Both Xyn01 and Xyn02 were most active at 60°C with high activities from 4 to 10 and optimal at pH 7 (Xyn01) and pH 6 (Xyn02). The cellulase gene, cel01, was expressed in E. coli BL21 and the recombinant enzyme (91.9 kDa) was purified. Cel01 exhibited high activity with soluble cellulose substrates containing β-1,4-linkages. Activity with microcrystalline cellulose was not detected. These data, together with the analysis of the degradation profiles of carboxymethyl cellulose and barley glucan indicated that Cel01 is an endo 1,4-β-glucanase. Cel01 showed optimal activity at 50°C and pH 7 being highly active from pH range 5 to 9 and possesses remarkable halotolerance.     

Quantitative investigation of non-hydrolytic disruptive activity on crystalline cellulose and application to recombinant swollenin

For the efficient degradation and bioconversion of cellulosic biomass, it is important to efficiently disrupt and convert crystalline regions of cellulose into easily hydrolyzable regions than to simply hydrolyze cellulose. Expansin-like proteins such as swollenins have disruptive functions on lignocellulose, including crystalline cellulose, via non-hydrolytic mechanisms. In this work, we produced the swollenin from Trichoderma asperellum in Escherichia coli. The recombinant protein was then refolded into the bioactive form with simultaneous purification via a novel cellulose-assisted process. We devised a novel, simple, and efficient method to quantitatively determine the non-hydrolytic disruptive activity of swollenin on crystalline cellulose. This method is based on the synergism of the swollenin and the endoglucanase FnCel5A from Fervidobacterium nodosum. The change from crystalline regions into easily hydrolyzable forms, due to non-hydrolytic disruption, might be slight and not easily be observed. However, disrupted regions of cellulose could be hydrolyzed by FnCel5A, and reducing sugars were formed by the synergism. The disruptive function of the swollenin was quantitatively characterized by measuring the release of reducing sugars. These methods and processes will be useful for further research on non-hydrolytic disruptive bioactivities and provide novel approaches for the efficient and economical bioconversion of cellulosic biomass.     

Function of four tryptophan residues on Cel7A catalytic efficiency: Insight into cellulase screening strategy based on natural cellulose or cellulose analogs

There is a high level of conservation of tryptophans within the active site architecture of the cellulase family, whereas the function of the four tryptophans in the catalytic domain of Cel7A is unclear. By mutating four tryptophan residues in the catalytic domain of Cel7A from Penicillium piceum (PpCel7A), the binding affinity between PpCel7A and p-nitrophenol-d -cellobioside (pNPC) was reduced as determined by Michaelis–Menten constants, molecular dynamics simulations, and fluorescence spectroscopy. Furthermore, PpCel7A variants showed a reduced level of cellobiohydrolase (CBH) activity against cellulose analogs or natural cellulose. Therefore, it could be concluded four tryptophan residues in Cel7A played a critical role in substrate binding. Mutagenesis results indicated that the W390 stacking interactions at the −2 site played an essential role in facilitating substrate distortion to the −1 site. As soon as the function was altered, the mutation would inevitably affect the catalytic activity against the natural substrate. Interestingly, no clear relationship was found between the CBH activity of PpCel7A variants against pNPC and Avicel. p-Nitrophenol contains many electrophilic groups that may result in overestimation of the binding constant between tryptophan residues and pNPC in comparison with the natural substrate. Consequently, screening improved cellulase using cellulose analogs would divert attention from the target direction for lignocellulose biorefinery. Clarifying mechanism of catalytic diversity on the natural cellulose or cellulose analogs may give better insight into cellulase screening and selecting strategy.