Isolation and purification of microbial community DNA from soil naturally enriched for chitin

We made an attempt to isolate and purify metagenomic DNA from chitin enriched soil. In this communication we report a modified direct lysis method for soil DNA extraction including initial pre-lysis washing of sample, followed by a rapid polyvinylpyrrolidone-agarose-based purification and electroelution of DNA using Gene-capsule™ assembly. Rapidity was achieved using low molarity conducting media (sodium-borate buffer) for electrophoresis by reducing run time for both the gel electrophoresis and electroelution. Extracted DNA was sufficiently pure and of high quality, evidenced by amplification of 16S rDNA and chitinase genes by PCR. Metagenomic nature of the DNA was confirmed by running V3 (16S rDNA) region amplicons using denaturing gradient gel electrophoresis. This method requires 30 min for purification, and less than 2 h for complete execution of protocol and becomes the first report on the isolation of metagenomic DNA from soil naturally enriched for chitin.     

DNA extraction from coral reef sediment bacteria for the polymerase chain reaction

A rapid and effective method for the direct extraction of high molecular weight amplifiable DNA from two coral reef sediments was developed. DNA was amplified by the polymerase chain reaction (PCR) using 16S rDNA specific primers. The amplicons were digested with HaeIII, HinP1I and MspI and separated using polyacrylamide gel electrophoresis and silver staining. The resulting amplified ribosomal DNA restriction analysis (ARDRA) patterns were used as a fingerprint to discern differences between the coral reef sediment samples. Results indicated that ARDRA is an effective method for determining differences within the bacterial community amongst different environmental samples.     

黄海沉积物柱状样中有孔虫古DNA的提取和PCR扩增的方法学初探

海洋沉积物柱状样有孔虫古DNA是近年来国际新兴的研究技术,对于解释海洋全球变化可以获取到传统形态学检获不到的遗传信息,并对其进行比较和补充。目前国际上有孔虫古DNA的研究主要开展于深海和极地等有利于DNA保存的环境,但对于近海陆架海域尚无相关有效的技术研究。为了探索适合提取和扩增陆架浅海环境沉积物柱状样中的有孔虫古DNA的方法,本实验以采自山东半岛附近的黄海沉积物柱状样为研究对象,通过改进DNA提取过程的涡旋震荡时间和洗脱液体积、比较不同的PCR扩增条件和引物对,对陆架浅海地区沉积物柱状样中有孔虫古DNA提取和PCR扩增的方法进行了探索。借助ImageJ软件对PCR产物的凝胶电泳图像进行了定量分析与比较。研究结果显示,延长涡旋震荡时间和减少洗脱液体积可以提高对海洋沉积物环境总古DNA的提取效能,使用引物对s14F0和s15以及优化后的PCR条件能成功扩增陆架浅海环境沉积物中的有孔虫古DNA。本文探索了适用于陆架浅海环境沉积物柱状样的有孔虫古DNA的研究技术,可为古海洋和古环境研究提供新的研究思路。     

A real‐time PCR method to quantify spores carrying the Bacillus thuringiensis var. israelensis cry4Aa and cry4Ba genes in soil

Aim: To develop a rapid real‐time PCR method for the specific detection and quantification of Bacillus thuringiensis var. israelensis (Bti) spores present in the environment. Methods and Results: Seven soil samples as well as one sediment sample obtained from various regions of Switzerland and characterized by different granulometry, pH values, organic matter and carbonate content were artificially inoculated with known amounts of Bti spores. After DNA extraction, DNA templates were amplified using TaqMan real‐time PCR targeting the cry4Aa and cry4Ba plasmid genes encoding two insecticidal toxins (δ‐endotoxins), and quantitative standard curves were created for each sample. Physicochemical characteristics of the samples tested did not influence DNA extraction efficiency. Real‐time PCR inhibition because of the presence of co‐extracted humic substances from the soil was observed only for undiluted DNA extracts from samples with very high organic matter content (68%). The developed real‐time PCR system proved to be sensitive, detecting down to 1 × 10³ Bti spores per g soil. One‐way analysis of variance confirmed the accuracy of the method. Conclusions: Direct extraction of DNA from environmental samples without culturing, followed by a specific real‐time PCR allowed for a fast and reliable identification and quantification of Bti spores in soil and sediment. Significance and Impact of the Study: The developed real‐time PCR system can be used as a tool for ecological surveys of areas where treatments with Bti are carried out.     

Polymerase chain reaction amplification of naphthalene-catabolic and 16S rRNA gene sequences from indigenous sediment bacteria.

We report the amplification of bacterial genes from uninoculated surface and subsurface sediments by the polymerase chain reaction (PCR). PCR amplification of indigenous bacterial 16S ribosomal DNA genes was unsuccessful when subsurface sediment containing approximately 10(7) cells.g-1 was added directly to a PCR mixture. However, when 10 mg of sediment was inoculated with approximately 10(5) cells of Pseudomonas putida G7, the nahAc naphthalene dioxygenase gene characteristic of the P. putida G7 NAH7 plasmid was detected by PCR amplification. Southern blotting of the PCR amplification product improved sensitivity to 10(3) to 10(4) cells from samples inoculated with P. putida G7, but controls with no sediment added showed that the PCR was partially inhibited by the sediments. Lysozyme-sodium dodecyl sulfate-freeze-thaw DNA extraction was combined with gel electrophoretic partial purification in the presence of polyvinylpyrrolidone to render DNA from indigenous bacteria in surface or subsurface sediment samples amplifiable by PCR using eubacterial 16S ribosomal DNA primers. The nahAc gene could also be amplified from indigenous bacteria by using nahAc-specific primers when PCR conditions were modified by increasing Taq and primer concentrations. Restriction digests of the nahAc amplification products from surface and subsurface sediments revealed polymorphism relative to P. putida G7. The procedures for DNA extraction, purification, and PCR amplification described here demonstrate that the PCR is a potentially useful tool in studies of function- and taxon-specific DNA from indigenous microbial communities in sediment and groundwater environments.     

DNA extraction method affects microbial community profiles from soils and sediment

To evaluate whether different deoxyribonucleic acid (DNA) extraction procedures can affect estimates of bacterial community composition, based on the 16S ribosomal ribonucleic acid gene denaturing gradient gel electrophoresis (DGGE) profiles, we compared four in situ lysis procedures using three soils and one marine sediment. Analysis of DGGE profiles, generated by polymerase chain reaction of purified DNA extracts, demonstrated that the choice of DNA extraction method significantly influenced the bacterial community profiles generated. This was reflected both in the number of bands or ribotypes detected from each sample and in subsequent principle coordinate analysis and unweighted-pair group method using arithmetic average analyses. The methods also differed significantly in their robustness, i.e. reproducibility across multiple analyses. Two methods, both based on bead beating, were demonstrated to be suitable for comparative studies of a range of soil and sediment types. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Detection of polychlorinated biphenyl degradation genes in polluted sediments by direct DNA extraction and polymerase chain reaction.

It was the aim of this study to specifically detect the DNA sequences for the bphC gene, the meta-cleavage enzyme of the aerobic catabolic pathway for biphenyl and polychlorinated biphenyl degradation, in aquatic sediments without prior cultivation of microorganisms by using extraction of total DNA, PCR amplification of bphC sequences, and detection with specific gene probes. The direct DNA extraction protocol used was modified to enhance lysis efficiency. Crude extracts of DNA were further purified by gel filtration, which yielded DNA that could be used for the PCR. PCR primers were designed for conserved regions of the bphC gene from a sequence alignment of five known sequences. The specificity of PCR amplification was verified by using digoxigenin-labeled DNA probes which were located internal to the amplified gene sequence. The detection limit for the bphC gene of Pseudomonas paucimobilis Q1 and Pseudomonas sp. strain LB400 was 100 cells per g (wet weight) or approximately five copies of the target sequence per PCR reaction mixture. In total-DNA extracts of aerobic top layers of sediment samples obtained from three different sampling sites along the Elbe River, which has a long history of anthropogenic pollution, Pseudomonas sp. strain LB 400-like sequences for the bphC gene were detected, but P. paucimobilis Q1 sequences were not detected. No bphC sequences were detected in an unpolluted lake sediment. A restriction analysis did not reveal any heterogeneity in the PCR product, and the possibility that sequences highly related to the bphC gene (namely, nahC and todE) were present was excluded.(ABSTRACT TRUNCATED AT 250 WORDS)     

Comparison of strategies for the isolation of PCR-compatible, genomic DNA from a municipal biogas plants

The goal of the project was the extraction of PCR-compatible genomic DNA representative of the entire microbial community from municipal biogas plant samples (mash, bioreactor content, process water, liquid fertilizer). For the initial isolation of representative DNA from the respective lysates, methods were used that employed adsorption, extraction, or precipitation to specifically enrich the DNA. Since no dedicated method for biogas plant samples was available, preference was given to kits/methods suited to samples that resembled either the bioreactor feed, e.g. foodstuffs, or those intended for environmental samples including wastewater. None of the methods succeeded in preparing DNA that was directly PCR-compatible. Instead the DNA was found to still contain considerable amounts of difficult-to-remove enzyme inhibitors (presumably humic acids) that hindered the PCR reaction. Based on the isolation method that gave the highest yield/purity for all sample types, subsequent purification was attempted by agarose gel electrophoresis followed by electroelution, spermine precipitation, or dialysis through nitrocellulose membrane. A combination of phenol/chloroform extraction followed by purification via dialysis constituted the most efficient sample treatment. When such DNA preparations were diluted 1:100 they did no longer inhibit PCR reactions, while they still contained sufficient genomic DNA to allow specific amplification of specific target sequences.     

A simple technique for electroelution of DNA from environmental samples.

A novel method was developed for the extraction of DNA from environmental material. Soil or sediment samples were encapsulated in agarose blocks and, following treatment with lysis reagents, the DNA was extracted by electroelution.     

Nitrogen Cycling and Community Structure of Proteobacterial β-Subgroup Ammonia-Oxidizing Bacteria within Polluted Marine Fish Farm Sediments

A multidisciplinary approach was used to study the effects of pollution from a marine fish farm on nitrification rates and on the community structure of ammonia-oxidizing bacteria in the underlying sediment. Organic content, ammonium concentrations, nitrification rates, and ammonia oxidizer most-probable-number counts were determined in samples of sediment collected from beneath a fish cage and on a transect at 20 and 40 m from the cage. The data suggest that nitrogen cycling was significantly disrupted directly beneath the fish cage, with inhibition of nitrification and denitrification. Although visual examination indicated some slight changes in sediment appearance at 20 m, all other measurements were similar to those obtained at 40 m, where the sediment was considered pristine. The community structures of proteobacterial β-subgroup ammonia-oxidizing bacteria at the sampling sites were compared by PCR amplification of 16S ribosomal DNA (rDNA), using primers which target this group. PCR products were analyzed by denaturing gradient gel electrophoresis (DGGE) and with oligonucleotide hybridization probes specific for different ammonia oxidizers. A DGGE doublet observed in PCR products from the highly polluted fish cage sediment sample was present at a lower intensity in the 20-m sample but was absent from the pristine 40-m sample station. Band migration, hybridization, and sequencing demonstrated that the doublet corresponded to a marine Nitrosomonas group which was originally observed in 16S rDNA clone libraries prepared from the same sediment samples but with different PCR primers. Our data suggest that this novel Nitrosomonas subgroup was selected for within polluted fish farm sediments and that the relative abundance of this group was influenced by the extent of pollution.     

Soil washing improves the recovery of total community DNA from polluted and high organic content sediments

Treatment of soil with surfactants and chelating agents is used in bioremediation studies to desorb and solubilize contaminants to increase their bioavalability to microorganisms. In the same way that pollutants are made more bioavailable to microorganisms, the procedure can be used to remove potential interfering materials from soil prior to cell lysis and extraction of DNA from indigenous microorganisms. The effect of soil washing was evaluated by extracting DNA from sediments of an intertidal freshwater wetland contaminated with hydrocarbons and from highly contaminated marine sediments from Sydney Harbour, Nova Scotia, Canada. Sediment samples had total organic carbon (TOC) contents that varied between 0.2% and 13%. The chemical lysis technique was also examined by comparison of an ammonium acetate precipitation of proteins and humic acids with a hexadecyltrimethylammonium bromide (CTAB) incubation and phenol:chloroform extraction. In this study, the incorporation of soil washing steps facilitated the desorption of contaminants from sediment surfaces and improved the recovery of DNA of amplifiable quality from both freshwater and marine sediments. CTAB contributed only slightly to the recovery of DNA of higher quality in the most contaminated sample from Sydney Harbour and was concomitant with a decrease in DNA yield in both sediment types. The incorporation of a soil washing step prior to the extraction of DNA from polluted environments may be important to solubilize and remove contaminants when high-quality DNA is required for subsequent analyses.     

An alternative, sensitive method to detect Helicobacter pylori DNA in feces

Background: Despite the high sensitivity and specificity of PCR, detection of Helicobacter pylori DNA in feces is still challenging. Fecal samples contain inhibitory molecules that can prevent amplification of the target DNA. Even by using specific DNA extraction kits for stools, monitoring of infection by analyzing stool samples remains problematic and endorses the need for improved diagnostic methods. Materials and Methods: The newly proposed method uses selective hybridization of target DNA with biotin‐labeled probes, followed by DNA isolation with streptavidin‐coated magnetic beads. After three washing steps, the purified DNA can be amplified immediately using conventional or quantitative PCR. In order to test this technique on biological samples, Mongolian gerbils were infected with H. pylori ATCC 43504 and fecal samples were analyzed on days 1, 4, and 10 post infection. Results: A detection limit of one bacterial cell per 100 mg stool sample was established, but only after removal of the magnetic beads from the target DNA by heating. This resulted in a 10‐fold increase of sensitivity compared to a commercially available stool DNA extraction kit. Analysis of fecal samples from infected gerbils demonstrated the presence of H. pylori DNA on each time point, while the uninfected animal remained negative. Conclusions: The proposed technique allows detection of very low quantities of H. pylori DNA in biological samples. In laboratory animal models, detailed monitoring of infection and complete clearance of infection can be demonstrated thanks to the low detection limit.     

A Simple Silica-based Method for Metagenomic DNA Extraction from Soil and Sediments

A new method is described for extraction of metagenomic DNA from soil and sediments which is based on DNA adsorption to silica without the use of phenol, ethanol precipitation or a cesium chloride gradient. High-quality DNA was obtained, and PCR inhibition was overcome by adding bovine serum albumin and adjusting magnesium concentration. By using PCR-DGGE with Firmicutes and lactic acid bacteria-specific primers the extracted metagenomic DNA was shown to contain a mixture of bacterial genomes. This method can be used for screening bacterial diversity in soil and sediment samples.     

Comparison of three DNA extraction methods for Mycobacterium bovis, Mycobacterium tuberculosis and Mycobacterium avium subsp. avium

Aims:  To compare three methods for DNA extraction from Mycobacterium bovis , Mycobacterium tuberculosis and Mycobacterium avium subsp. avium .
Methods and Results:  The DNA was extracted from mycobacterial cultures using enzymatic extraction, combined bead beating and enzymatic extraction and cetyltrimethylammonium bromide (CTAB) extraction. The yield and quality of DNA were compared by spectrophotometry, agarose gel electrophoresis, restriction endonuclease analysis and PCR. The combined bead beating and enzymatic extraction method yielded more DNA. However, that method produced some sheared DNA, visible either by agarose gel electrophoresis or by restriction endonuclease analysis. All methods were appropriate for PCR amplification of a 123 bp fragment of IS 6110 in M. bovis and M. tuberculosis , and of a 1700 bp fragment of FR300 region in M. avium avium .
Conclusions:  Combined bead beating and enzymatic extraction method was the most efficient and easy method for extracting DNA from bacteria of the M. tuberculosis complex.
Significance and Impact of the Study:  The results reveal important differences among the DNA extraction methods for mycobacteria, which are relevant for the success of further downstream molecular analysis.     

Convenient determination of DNA extraction efficiency using an external DNA recovery standard and quantitative-competitive PCR

Molecular biology techniques have advanced the field of microbial ecology through the analysis of nucleic acids. Most techniques that use DNA or RNA require their extraction from environmental matrices, which can be tedious and inefficient. While a number of extraction methods, both laboratory-based and commercially available, have been developed, none of these include a convenient method to determine extraction efficiency. We have developed an external DNA recovery standard, Lambda DNA (target DNA) contained within pBR322, allowing routine determinations of DNA recovery efficiency. Target DNA was added to sediments as whole cells, total DNA extracted using commercial DNA extraction/purification kits and the amount of target DNA recovered quantified by quantitative-competitive PCR (QC-PCR). Three commercially available kits (UltraClean Soil DNA, FastDNA SPIN and Soil Master DNA Extraction) were evaluated for recovery efficiency. Recoveries for the three kits ranged from undetectable to 43.3% with average recoveries of 14.9+/-16.0%, 28.3+/-10.5% and 2.4+/-0.1% (UltraClean, FastDNA and Soil Master, respectively). Quantification of target DNA proved robust in sediments heavily polluted with polycyclic aromatic hydrocarbons and the external recovery standard could be detected following extraction and amplification from as few as 1 x 10(3) cells added to 0.5 g sediment (wet weight). The external DNA recovery standard was also added directly to the sediment as purified plasmid DNA prior to extraction. It was recovered with similar efficiency as when added as whole cells, suggesting its usefulness in estimating DNA recovery in ribosomal DNA studies. These results show that, while the commercial kits offer expedited sample processing, the extraction efficiencies vary on a sample-by-sample basis and were <100%. Therefore, quantitative DNA studies require an estimation of DNA recovery.     

Rapid method for separation of bacterial DNA from humic substances in sediments for polymerase chain reaction.

The polymerase chain reaction (PCR) was used to amplify an Escherichia coli 16S ribosomal gene fragment from sediments with high contents of humic substances. Total DNA was extracted from 1 g of E. coli seeded or unseeded samples by a rapid freeze-and-thaw method. Several approaches (use of Bio-Gel P-6 and P-30 and Sephadex G-50 and G-200 columns, as well as use of the Stoffel fragment) were used to reduce interference with the PCR. The best results were obtained when crude DNA extracts containing humic substances were purified by using Sephadex G-200 spun columns saturated with Tris-EDTA buffer (pH 8.0). Eluted fractions were collected for PCR analyses. The amplified DNA fragment was obtained from seeded sediments containing fewer than 70 E. coli cells per g. Because only 1/100 of the eluted fractions containing DNA extracts from 70 cells per g was used for the PCR, the sensitivity of detection was determined to be less than 1 E. coli cell. Thus, DNA direct extraction coupled with this technique to remove interference by humic substances and followed by the PCR can be a powerful tool to detect low numbers of bacterial cells in environmental samples containing humic substances.     

Rapid method for separation of bacterial DNA from humic substances in sediments for polymerase chain reaction.

The polymerase chain reaction (PCR) was used to amplify an Escherichia coli 16S ribosomal gene fragment from sediments with high contents of humic substances. Total DNA was extracted from 1 g of E. coli seeded or unseeded samples by a rapid freeze-and-thaw method. Several approaches (use of Bio-Gel P-6 and P-30 and Sephadex G-50 and G-200 columns, as well as use of the Stoffel fragment) were used to reduce interference with the PCR. The best results were obtained when crude DNA extracts containing humic substances were purified by using Sephadex G-200 spun columns saturated with Tris-EDTA buffer (pH 8.0). Eluted fractions were collected for PCR analyses. The amplified DNA fragment was obtained from seeded sediments containing fewer than 70 E. coli cells per g. Because only 1/100 of the eluted fractions containing DNA extracts from 70 cells per g was used for the PCR, the sensitivity of detection was determined to be less than 1 E. coli cell. Thus, DNA direct extraction coupled with this technique to remove interference by humic substances and followed by the PCR can be a powerful tool to detect low numbers of bacterial cells in environmental samples containing humic substances.     

Detection of Naegleria fowleri cysts in environmental samples by using a DNA probe

Abstract In this study we tried to detect DNA Naegleria fowleri in artificially contaminated environmental samples, with or without sediments, containing 10⁴ cysts of this pathogenic amoeba. We used two assays to extract DNA from samples: first, direct DNA extraction, which gave positive results only for water samples without sediment; second, DNA extraction after sample incubation on agar plates, which allowed us to remove amoeba growing out of the sediments, and which gave positive results for all samples, even those initially with sediments (5, 500 or 500 mg). Thus, this molecular identification appears as a powerful tool to investigate N. fowleri growth in environmental samples.     

Comparison of three methods for DNA extraction from bone remains

Extraction of amplifiable DNA is a frequent problem when working with degraded specimens like bone samples. The possibility of obtaining as much information as possible from these samples has a particular significance in many forensic investigations. The present investigation was aimed to assess the efficiency of three organic extraction methods for purifying amplifiable DNA from bone samples. The amount of nucleic acids obtained, the success rate in the amplification of DNA microsatellite (STR) markers and amelogenin by PCR, the influence of PCR inhibitors and environmental conditions, and where the samples were found before their processing in the laboratory, were all evaluated in this investigation for the three methods. Results showed that method A (a modification of FBI method for DNA extraction) performed better in producing not a higher amount but a better quality amplifiable DNA, in comparison with the other two methods evaluated. It was also demonstrated that the quality of the DNA to be amplified by PCR was influenced by the presence of inhibitors and/or contaminants and the environmental conditions where the bone sample was taken from. The worst conditions were observed from aquatic environments. The results suggest that the implementation of some specific modifications in the method A (use of purification columns, reliable quantification methods and different dilutions) would help to obtain better DNA extracts intended to be used in different molecular identification tests.