Tension required for pectate chemistry to control growth in Chara corallina

Recent work showed that polygalacturonate (pectate) chemistry controlled the growth rate of the large-celled alga Chara corallina when turgor pressure (P) was normal (about 0.5 MPa). The mechanism involved calcium withdrawal from the wall by newly supplied pectate acting as a chelator. But P itself can affect growth rate. Therefore, pectate chemistry was investigated at various P. A pressure probe varied P in isolated walls, varying the tension on the calcium pectate cross-links bearing the load of P. When soluble pectate was newly supplied, the wall grew irreversibly but the pectate was inactive below a P of 0.2 MPa, indicating that tension was required in the existing wall before new pectate acted. It was suggested that the tension distorted some of the wall pectate (the dominant pectin), weakening its calcium cross-links and causing the calcium to be preferentially lost to the new pectate, which was not distorted. The preferential loss provided a molecular mechanism for loosening the wall structure, resulting in faster growth. However, the resulting relaxation of the vacated wall pectate would cause calcium to be exchanged with load-bearing calcium pectate nearby, auto-propagating throughout the wall for long periods. There is evidence for this effect in isolated walls. In live cells, there is also evidence that auto-propagation is controlled by binding the newly supplied pectate (now calcium pectate) to the wall and/or by additional Ca(2+) entering the wall structure. A tension-dependent cycle of pectate chemistry thus appeared to control growth while new wall was deposited as a consequence.     

Calcium deprivation disrupts enlargement of Chara corallina cells: further evidence for the calcium pectate cycle

Pectin is a normal constituent of cell walls of green plants. When supplied externally to live cells or walls isolated from the large-celled green alga Chara corallina, pectin removes calcium from load-bearing cross-links in the wall, loosening the structure and allowing it to deform more rapidly under the action of turgor pressure. New Ca(2+) enters the vacated positions in the wall and the externally supplied pectin binds to the wall, depositing new wall material that strengthens the wall. A calcium pectate cycle has been proposed for these sub-reactions. In the present work, the cycle was tested in C. corallina by depriving the wall of external Ca(2+) while allowing the cycle to run. The prediction is that growth would eventually be disrupted by a lack of adequate deposition of new wall. The test involved adding pectate or the calcium chelator EGTA to the Ca(2+)-containing culture medium to bind the calcium while the cycle ran in live cells. After growth accelerated, turgor and growth eventually decreased, followed by an abrupt turgor loss and growth cessation. The same experiment with isolated walls suggested the walls of live cells became unable to support the plasma membrane. If instead the pectate or EGTA was replaced with fresh Ca(2+)-containing culture medium during the initial acceleration in live cells, growth was not disrupted and returned to the original rates. The operation of the cycle was thus confirmed, providing further evidence that growth rates and wall biosynthesis are controlled by these sub-reactions in plant cell walls.     

Calcium pectate chemistry controls growth rate of Chara corallina

Pectin, a normal constituent of cell walls, caused growth rates to accelerate to the rates in living cells when supplied externally to isolated cell walls of Chara corallina. Because this activity was not reported previously, the activity was investigated. Turgor pressure (P) was maintained in isolated walls or living cells using a pressure probe in culture medium. Pectin from various sources was supplied to the medium. Ca and Mg were the dominant inorganic elements in the wall. EGTA or pectin in the culture medium extracted moderate amounts of wall Ca and essentially all the wall Mg, and wall growth accelerated. Removing the external EGTA or pectin and replacing with fresh medium returned growth to the original rate. A high concentration of Ca2+ quenched the accelerating activity of EGTA or pectin and caused gelling of the pectin, physically inhibiting wall growth. Low pH had little effect. After the Mg had been removed, Ca-pectate in the wall bore the longitudinal load imposed by P. Removal of this Ca caused the wall to burst. Live cells and isolated walls reacted similarly. It was concluded that Ca cross-links between neighbouring pectin molecules were strong wall bonds that controlled wall growth rates. The central role of Ca-pectate chemistry was illustrated by removing Ca cross-links with new pectin (wall "loosening"), replacing vacated cross-links with new Ca2+ ("Ca2+-tightening"), or adding new cross-links with new Ca-pectate that gelled ("gel tightening"). These findings establish a molecular model for growth that includes wall deposition and assembly for sustained growth activity.     

Identifying cytoplasmic input to the cell wall of growing Chara corallina

Plants enlarge mostly because the walls of certain cells enlarge, with accompanying input of wall constituents and other factors from the cytoplasm. However, the enlargement can occur without input, suggesting an uncertain relationship between cytoplasmic input and plant growth. Therefore, the role of the input was investigated by quantitatively comparing growth in isolated walls (no input) with that in living cells (input occurring). Cell walls were isolated from growing internodes of Chara corallina and filled with pressurized oil to control turgor pressure while elongation was monitored. Turgor pressure in living cells was similarly controlled and monitored by adding/removing cell solution. Temperature was varied in some experiments. At all pressures and temperatures, isolated walls displayed turgor-driven growth indistinguishable in every respect from that in living cells, except the rate decelerated in the isolated walls while the living cells grew rapidly. The growth in the isolated walls was highly responsive to temperature, in contrast to the elastic extension that has been shown to be insensitive to similar temperatures. Consequently, strong intermolecular bonds were responsible for growth and weak bonds for elastic extension. Boiling the walls gave the same results, indicating that enzyme activities were not controlling these bonds. However, pectin added to isolated walls reversed their growth deceleration and returned the rate to that in the living cells. The pectin was similar to that normally produced by the cytoplasm and deposited in the wall, suggesting that continued cytoplasmic input of pectin may play a role in sustaining turgor-driven growth in Chara.     

Ca2+ and phosphate releases from calcified Chara cell walls in concentrated KCl solution

Ca2+ and P(i) (inorganic phosphate) releases from isolated calcified and uncalcified Chara cell walls were measured with a Ca(2+)-selective electrode and colorimetry, and their ionic relations were analysed on the basis of the electroneutrality rule. The results showed that (1) not only Ca2+ but also P(i) can be released from isolated calcified Chara cell walls into pure deionized water and 100 mM KCl solution, and (2) the positive charge due to the Ca2+ released cannot be neutralized only by the negative charge from the simultaneously released P(i). These findings suggest that calcium bands of calcified Chara cell walls are composed of mainly CaCO(3) and CaHPO(4) and some anions other than P(i) should be released simultaneously with the Ca2+ and P(i). More Ca2+ and P(i) can be solubilized from isolated Chara cell walls in 100 mM KCl solution than in pure deionized water. The pH value of 100 mM KCl solution in which isolated uncalcified young Chara cell walls have been immersed is a little lower than that of pure deionized water in which the same isolated uncalcified young Chara cell walls have been immersed, suggesting that some acidic substances are solubilized by 100 mM KCl. To explain this from the viewpoint of solution chemistry, the solubilities of pure CaCO(3) and pure CaHPO(4) in water and 100 mM KCl solution were measured with a Ca2+ -selective electrode and their pH values with a glass pH electrode. The conclusion reached was that the Ca2+ release from isolated Chara cell walls is accompanied by the release of P(i), CO(2-)(3) and acidic substances. This suggests that the so-called calcium bands and/or ionic relations, including ion exchange, in Chara cell walls are chemically or physicochemically more complex than they are currently considered to be.     

Pectate distribution and esterification in Dubautia leaves and soybean nodules,studied with a fluorescent hybridization probe

Carbohydrate-hybridization probes (Vreeland and Laetsch, 1989, Planta (177, 423–434) were used to localize the homogalacturonan (pectate) component of pectins in the cell walls of leaves and soybean root nodules. Leaves of two species of the dicotyledon Dubautia were compared; these species contain much pectin but differ in their tissue water relations with respect to their cell-wall properties. Maturation of the primary cell walls in nodules was studied in the Bradyrhizobium japonicum-Glycine max symbiosis. Probe labelling was based on the divalent-cation-mediated association between pectate in tissue sections and fluorescein-conjugated pectate fragments. Pectate was also labelled by mixed-dimer formation with fluorescent polyguluronate derived from alginate. The specificity of the probe for unesterified polygalacturonate was indicated by increased cell-wall labelling after chemical or enzymatic deesterification of tissue sections, in contrast to elimination of labelling by chemical esterification. Postfixation of tissue sections improved retention of soluble pectate. Pectate differences were found in the leaves among cell types, in degree of esterification, and between plant species. The cell walls of soybean nodules were strongly labelled by the pectate probe in nodules one week and three weeks after infection. Pectate was more highly esterified in the central infected zone than in the surrouding cortex. Within the infected zone, walls of uninfected cells and infected cells were similarly labelled by the pectate probe. The results indicate that the pectate molecular probe provides detailed information on pectate distribution at the cellular level for investigations of cell-wall structure, development and physiology.Abbreviations EDTA ethylenedinitrilotetraacetic acid (ethylenediaminetetraacetic acid) - NMR nuclear magnetic resonance spectroscopy - TTB 1,3,5-triazido-2,4,6-trinitrobenene     

Factors affecting aluminium sorption by calcium pectate

Extracellular processes, particularly the adsorption of aluminium (Al) by pectate in the cell wall, have been proposed as important in the expression of Al toxicity to plant roots. In vitro studies were conducted on the effects of Al concentration (generally ≤ 32 μM), calcium (Ca) concentration (0.05 to 10 mM) and pH (3.2 to 5.4) on Al sorption by Ca pectate. There was a rapid reaction between Al and Ca pectate, there being no difference in Al remaining in solution after reaction times of 1 to 16 min, and only a slight decrease after 24 h. Increased Al concentration in solution increased linearly the sorption of Al by Ca pectate, with 70 to 84% of the Al originally in solution sorbed with ≤32 μM Al. In contrast, Al sorption decreased with increased Ca concentration in solution, and as pH decreased from 5.4 to 3.2. Only ≤30% of the sorbed Al was desorbed after 1 h by 1 mM CaCl₂, 10 mM CaCl₂ or 1 mM HCl. The amount of Al desorbed increased with a desorption period of 5 h, particularly with 1 mM HCl. These studies suggest that Al sorbed by Ca pectate in root cell walls is in equilibrium with Al in solution, and that Al toxicity is associated with the strong binding between Al and Ca pectate external to the cytoplasm.     

Periplasm turgor pressure controls wall deposition and assembly in growing Chara corallina cells

BACKGROUND AND AIMS: New wall deposition usually accompanies plant growth. External osmotica inhibit both processes but wall precursors continue to be synthesized, and exocytosis follows. Consequently, the osmotica appear to act outside of the plasma membrane. Because this implies an action of turgor pressure (P) on the periplasm by unknown mechanisms, the following study was undertaken to determine whether P could act in a way that altered wall deposition and assembly in the periplasm while the cells grow. METHODS: Cells of Chara corallina were exposed to P slightly below normal by using a pressure probe while supplying inorganic carbon in light. After labelling, the walls were isolated and the amount of new wall was determined. Similar measurements were made after treatment with osmotica. Chlortetracycline-stimulated exocytosis was determined microscopically. Polysaccharide properties were determined by confocal microscopy and vapour pressure osmometry in an 'artificial periplasm' in isolated Chara cell walls, using labelled dextran as an analogue of hemicellulose, and polygalacturonate as pectin. KEY RESULTS: Rapid growth and wall deposition occurred at normal P of 0.5 MPa but both processes decreased when P was lowered 0.1 MPa. Inorganic carbon uptake and exocytosis were unaffected. In the artificial periplasm, normal P caused high polysaccharide concentrations and rapid polysaccharide entry into the wall, and gel formation in the pectin. Lowering P decreased entry and gel formation. CONCLUSIONS: This is the first indication that normal P of 0.5 MPa can concentrate periplasmic polysaccharides sufficiently to cause cross-linking and gel formation in pectins while simultaneously fostering the entry of large polysaccharides into small interstices in the existing wall. This P-action would thicken the primary wall and form a smooth transition between the new and old structure, suggesting a molecular mechanism of wall deposition and assembly while the wall extends.     

Molecular and genetic characterization of two pollen-expressed genes that have sequence similarity to pectate lyases of the plant pathogen Erwinia

A set of cDNAs that are expressed in tomato anthers were isolated [24]. We further characterized two of these cDNAs (LAT56 and LAT59) and their corresponding genomic clones. LAT56 and LAT59 show low levels of steady-state mRNA in immature anthers and maximal levels in mature anthers and pollen. The LAT56 and LAT59 genes are single-copy in the tomato genome, and are linked on chromosome 3, approximately 5 cM apart. Although these cDNAs did not cross-hybridize, their deduced protein sequences (P56 and P59) have 54% amino acid identity. The LAT56 and LAT59 genes each have two introns, but they are located in non-homologous positions. P56 and P59 show significant protein sequence similarity to pectate lyases of plant pathogenic bacteria. The similarity of P56 and P59 to the bacterial pectate lyases is equivalent to the homology described for different pectate lyase sequences of the genus Erwinia. We suggest that the pollen expression of LAT56 and LAT59 might relate to a requirement for pectin degradation during pollen tube growth.Abbreviations LAT, late anther tomato - bp, base pairs - MA, mature anther - PL, pectate lyase - kb, kilobase (pairs)     

Fracture mechanics of the cell wall of Chara corallina

Previous mechanical studies using algae have concentrated on cell extension and growth using creep-type experiments, but there appears to be no published study of their failure properties. The mechanical strength of single large internode cell walls (up to 2 mm diameter and 100 mm in length) of the charophyte (giant alga) Chara corallina was determined by dissecting cells to give sheets of cell wall, which were then notched and fractured under tension. Tensile tests, using a range of notch sizes, were conducted on cell walls of varying age and maturity to establish their notch sensitivity and to investigate the propagation of cracks in plant cell walls. The thickness and stiffness of the walls increased with age whereas their strength was little affected. The strength of unnotched walls was estimated as 47 ± 13 MPa, comparable to that of some grasses but an order of magnitude higher than that published for model bacterial cellulose composite walls. The strength was notch-sensitive and the critical stress intensity factor K _1c was estimated to be 0.63 ± 0.19 MNm^−3/2, comparable to published values for grasses. Received: 4 April 2000 / Accepted: 21 July 2000     

Degumming and characterization of ramie fibre using pectate lyase from immobilized Bacillus pumilus DKS1

Aims:  The present study was aimed at finding the optimal conditions for the production of pectate lyase using immobilized Bacillus pumilus DKS1 cells in calcium-alginate (Ca-alginate) beads and determining the efficient degumming of ramie fibre.
Methods and Results:  The active cells of B. pumilus DKS1 were immobilized in Ca-alginate and used for the production of pectate lyase. The production of enzyme increased significantly with increasing alginate concentration and reached a maximum enzyme yield of 38·5 U ml⁻¹ at 18 g l⁻¹. This was about 1·5-fold higher than that obtained by free cells. Degummed fibre using immobilized cells showed better tenacity than that prepared by using nonimmobilized cells.
Conclusions:  The Ca-alginate entrapment is a promising immobilization method of B. pumilus DKS1 for semicontinuous enzyme production. Enzyme production by immobilized cells is superior to that of free cells because it leads to higher volumetric activities within the same period of fermentation. Fibre degumming by using immobilized cells produced better quality fibre.
Significance and Impact of the Study:  This is the first report of degumming of fibre using enzyme from immobilized B. pumilus cells as per our knowledge. High-quality degummed fibre could be prepared with relatively inexpensive inputs for use in the textile and paper industry.     

An exo-poly-alpha-D-galacturonosidase implicated in the regulation of extracellular pectate lyase production in Erwinia chrysanthemi.

Pectic enzymes in the supernatants of Erwinia chrysanthemi cultures in late-logarithmic-phase growth on D-galacturonan were resolved into three components: two pectate lyase isozymes and an exo-poly-alpha-D-galacturonosidase previously unreported in this organism. The hydrolytic enzyme was purified to homogeneity by ammonium sulfate fractionation, preparative electrofocusing in Ultrodex gel, and gel filtration through Ultrogel AcA54. The enzyme had a specific activity of 591 mumol/min per mg of protein, a pI of 8.3, a molecular weight of 67,000, a pH optimum of 6.0, and a Km of 0.05 mM for D-galacturonan. Analyses of reaction mixtures by paper chromatography revealed that the enzyme released only digalacturonic acid from D-galacturonan. The action of the hydrolytic enzyme on D-galacturonan labeled at the nonreducing end by partial digestion with pectate lyase revealed that it rapidly released 4,5-unsaturated digalacturonic acid from 4,5-unsaturated pectic polymers. The production of extracellular exo-poly-alpha-D-galacturonosidase was coordinately regulated with pectate lyase production. The action patterns of the two enzymes appeared complementary in the degradation of pectic polymers to disaccharides that stimulated pectic enzyme production and supported bacterial growth.     

生长前期叶面喷施乙烯利对甘蔗茎细胞几种酶活性的影响

在甘蔗分蘖初期用乙烯利进行叶面喷施处理 ,并在不同的时期分别对蔗茎细胞质和细胞壁的几种代谢关键酶活性进行测定 ,结果表明 :适当浓度的乙烯利处理提高了整个生长期甘蔗茎细胞质的过氧化物酶活性、生长前中期甘蔗茎细胞质和细胞壁的 Ca2 +-ATP酶、细胞质的 Mg2 +-ATP酶活性和生长后期细胞质的多酚氧化酶活性 ,较高浓度的乙烯利处理普遍提高整个生长期甘蔗茎细胞质和细胞壁的 Ca2 +-ATP酶活性、细胞壁的 Mg2 +-ATP酶活性和旺盛生长期间细胞壁的过氧化物酶活性     

Expression of a Bacillus subtilis pectate lyase gene in Pichia pastoris

The methylotrophic yeast Pichia pastoris is an attractive heterologous protein expression host, mainly for genes from higher eukaryotes. However, no successful examples for the expression of bacterial gene encoding pectate lyase in P. pastoris have been reported. The present study reports for the first time the cloning and functional expression of the bacterial Bacillus subtilis gene encoding alkaline pectate lyase in P. pastoris. A molecular weight of 43,644 Da was calculated from the deduced amino acid sequence. A pectate lyase activity as high as 100 U/ml was attained in the fermentation broth of P. pastoris GS 115, which was about 10 times higher than when the gene is expressed in Escherichia coli. The recombinant pectate lyase was purified to homogeneity and maximal activity of the enzyme was observed at 65 °C, and pH 9.4. The recombinant enzyme showed a wider pH and thermal stability spectrum than the purified pectate lyase from B. subtilis WSHB04-02. Pectate lyase activity slightly increased in the presence of Mg²⁺ (ion) but decreased in the presence of other metal ions. Analysis of polygalacturonic acid degradation products by electrospray ionization-mass spectrometry revealed that the degradation products were unsaturated trigalacturonic acid and unsaturated bigalacturonic acid, which confirms that the enzyme catalyzes a trans-elimination reaction.     

Turgor pressure moves polysaccharides into growing cell walls of Chara corallina

BACKGROUND AND AIMS: Plant growth involves pressure-driven cell enlargement generally accompanied by deposition of new cell wall. New polysaccharides are secreted by the plasma membrane but their subsequent entry into the wall is obscure. Therefore, polysaccharides and gold colloids of various sizes were presented to the inner wall face as though they were secreted by the plasma membrane. METHODS: Primary cell walls were isolated from growing internodes of Chara corallina and one end was attached to a glass capillary. Solutions of dextran or suspensions of gold colloids were pushed into the lumen by oil in the capillary. The oil did not enter the wall, and the solution or suspension was pressed against the inner wall face, pressurized at various 'artificial' P (turgor pressure), and polymer or colloid movement through the wall was monitored. KEY RESULTS: Interstices in the wall matrix had a diameter of about 4.6 nm measured at high P with gold colloids. Small solute (0.8 nm) readily moved through these interstices unaffected by P. Dextrans of 3.5 nm diameter moved faster at higher P while dextran of 9 nm scarcely entered unless high P was present. Dextran of 11 nm did not enter unless P was above a threshold, and dextran of 27 nm did not enter at P as high as 0.5 MPa. The walls filtered the dextrans, which became concentrated against the inner wall face, and most polymer movement occurred after P stabilized and bulk flow ended. CONCLUSIONS: P created a steep gradient in concentration and mechanical force at the inner wall face that moved large polymers into small wall openings apparently by starting a polymer end or deforming the polymer mechanically at the inner wall face. This movement occurred at P generally accepted to extend the walls for growth.     

Highly alkaline pectate lyase Pel-4A from alkaliphilic Bacillus sp. strain P-4-N: its catalytic properties and deduced amino acid sequence

The gene for a highly alkaline pectate lyase, Pel-4A, from alkaliphilic Bacillus sp. strain P-4-N was cloned, sequenced, and overexpressed in Bacillus subtilis cells. The deduced amino acid sequence of the mature enzyme (318 amino acids, 34 805 Da) showed moderate homology to those of known pectate lyases in the polysaccharide lyase family 1. The purified recombinant enzyme had an isoelectric point of pH 9.7 and a molecular mass of 34 kDa, and exhibited a very high specific activity compared with known pectate lyases reported so far. The enzyme activity was stimulated 1.6 fold by addition of NaCl at an optimum of 100 mM. When Pel-4A was stored at 50°C for 60 h, striking stabilization by 100 mM NaCl was observed in a pH range from 5 to 11.5, whereas it was stable only around pH 11 in the absence of NaCl. Received: June 10, 2000 / Accepted: October 3, 2000     

Structure of a plant cell wall fragment complexed to pectate lyase C.

The three-dimensional structure of a complex between the pectate lyase C (PelC) R218K mutant and a plant cell wall fragment has been determined by x-ray diffraction techniques to a resolution of 2.2 A and refined to a crystallographic R factor of 18.6%. The oligosaccharide substrate, alpha-D-GalpA-([1-->4]-alpha-D-GalpA)3-(1-->4)-D-GalpA , is composed of five galacturonopyranose units (D-GalpA) linked by alpha-(1-->4) glycosidic bonds. PelC is secreted by the plant pathogen Erwinia chrysanthemi and degrades the pectate component of plant cell walls in soft rot diseases. The substrate has been trapped in crystals by using the inactive R218K mutant. Four of the five saccharide units of the substrate are well ordered and represent an atomic view of the pectate component in plant cell walls. The conformation of the pectate fragment is a mix of 21 and 31 right-handed helices. The substrate binds in a cleft, interacting primarily with positively charged groups: either lysine or arginine amino acids on PelC or the four Ca2+ ions found in the complex. The observed protein-oligosaccharide interactions provide a functional explanation for many of the invariant and conserved amino acids in the pectate lyase family of proteins. Because the R218K PelC-galacturonopentaose complex represents an intermediate in the reaction pathway, the structure also reveals important details regarding the enzymatic mechanism. Notably, the results suggest that an arginine, which is invariant in the pectate lyase superfamily, is the amino acid that initiates proton abstraction during the beta elimination cleavage of polygalacturonic acid.