Isolation and characterization of a biosurfactant‐producing Fusarium sp. BS‐8 from oil contaminated soil

This study reports characterization of a biosurfactant‐producing fungal isolate from oil contaminated soil of Missa Keswal oil field, Pakistan. It was identified as Fusarium sp. BS‐8 on the basis of macroscopic and microscopic morphology, and 18S rDNA gene sequence homology. The biosurfactant‐producing capability of the fungal isolates was screened using oil displacement activity, emulsification index assay, and surface tension (SFT) measurement. The optimization of operational parameters and culture conditions resulted in maximum biosurfactant production using 9% (v/v) inoculum at 30°C, pH 7.0, using sucrose and yeast extract, as carbon and nitrogen sources, respectively. A C:N ratio of 0.9:0.1 (w/w) was found to be optimum for growth and biosurfactant production. At optimal conditions, it attained lowest SFT (i.e., 32 mN m^?1) with a critical micelle concentration of ≥ 1.2 mg mL^?1. During 5 L shake flask fermentation experiments, the biosurfactant productivity was 1.21 g L^?1 pure biosurfactant having significant emulsifying index (E₂₄, 70%) and oil‐displacing activity (16 mm). Thin layer chromatography and Fourier transform infrared spectrometric analyses indicated a lipopeptide type of the biosurfactant. The Fusarium sp. BS‐8 has substantial potential of biosurfactant production, yet it needs to be fully characterized with possibility of relatively new class of biosurfactants. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1065–1075, 2014     

A novel membrane stirrer system enables foam-free biosurfactant production

Bioreactors are the operative backbone, for example, for the production of biopharmaceuticals, biomaterials in tissue engineering, and sustainable substitutes for chemicals. Still, the Achilles' heel of bioreactors nowadays is the aeration which is based on intense stirring and gas sparging, yielding inherent drawbacks such as shear stress, foaming, and sterility concerns. We present the synergistic combination of simulations and experiments toward a membrane stirrer for the efficient bubble-free aeration of bioreactors. A digital twin of the bioreactor with an integrated membrane-module stirrer (MemStir) was developed with computational fluid dynamics (CFD) studies addressing the determination of fluid mixing, shear rates, and local oxygen concentration. Usability of the MemStir is shown in a foam-free recombinant production process of biosurfactants (rhamnolipids) from glucose with different strains of Pseudomonas putida KT2440 in a 3-L vessel and benchmarked against a regular aerated process. The MemStir delivered a maximal oxygen transfer rate (OTR_max) of 175 mmol L⁻¹ h⁻¹ in completely foam-free cultivations. With a high space-time yield (STY) of 118 mg_RL L⁻¹ h⁻¹ during a fed-batch fermentation, the effectiveness of the novel MemStir is demonstrated. Simulations show the generic value of the MemStir beyond biosurfactant production, for example, for animal cell cultivation.     

Identification and ultra‐high‐performance liquid chromatography coupled with high‐resolution mass spectrometry characterization of biosurfactants,including a new surfactin,isolated from oil‐contaminated environments

Biosurfactant‐producing bacteria were isolated from samples collected in areas contaminated with crude oil. The isolates were screened for biosurfactant production using qualitative drop‐collapse test, oil‐spreading and emulsification assays, and measurement of their tensoactive properties. Five isolates tested positive for in the screening experiments and displayed decrease in the surface tension below 30 mN m^?1. The biosurfactants produced by these isolates were further investigated and their molecular identification revealed that they are bacteria related to the Bacillus genus. Additionally, the biosurfactants produced were chemically characterized via UHPLC‐HRMS experiments, indicating the production of surfactin homologues, including a new class of these molecules.     

Biosurfactants from thermophilic dairy streptococci and their potential role in the fouling control of heat exchanger plates

Recent work on biosurfactant release by thermophilic dairy streptococci is reviewed. There is a suggestion thatStreptococcus thermophilus isolates may release biosurfactants that stimulate detachment of already-adhering cells and leave an anti-adhesive coating on a substratum. A previously published rapid screening method is described for the identification of biosurfactant-releasing microorganisms, and growth medium supplements to enhance biosurfactant release by thermophilic dairy streptococci are reported. New experimental work described includes the isolation and purification of biosurfactants from dairy isolates by thin layer chromatography. Many compounds isolated were extremely surface-active and reduced the water surface tension to values around 30 mJ m^–2 at a concentration of 10 mg ml^–1. Most importantly, the thin layer chromatograms of various isolates resembled each other, and an adsorbed purified compound from one isolate retarded the deposition to glass of another isolate by a factor of two. Provided our findings implicate that these biosurfactants could also be adsorbed to heat exchanger plates in pasteurizers and thereby retard colonization by thermophilic streptococci, these compounds may have major economic implications. Further work is required, however.     

Antimicrobial potential of a lipopeptide biosurfactant derived from a marine Bacillus circulans

Aims: To isolate the biologically active fraction of the lipopeptide biosurfactant produced by a marine Bacillus circulans and study its antimicrobial potentials. Methods and Results: The marine isolate B. circulans was cultivated in glucose mineral salts medium and the crude biosurfactant was isolated by chemical isolation method. The crude biosurfactants were solvent extracted with methanol and the methanol extract was subjected to reverse phase high‐performance liquid chromatography (HPLC). The crude biosurfactants resolved into six major fractions in HPLC. The sixth HPLC fraction eluting at a retention time of 27·3 min showed the maximum surface tension‐reducing property and reduced the surface tension of water from 72 mNm^?1 to 28 mNm^?1. Only this fraction was found to posses bioactivity and showed a pronounced antimicrobial action against a panel of Gram‐positive and Gram‐negative pathogenic and semi‐pathogenic micro‐organisms including a few multidrug‐resistant (MDR) pathogenic clinical isolates. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of this antimicrobial fraction of the biosurfactant were determined for these test organisms. The biosurfactant was found to be active against Gram‐negative bacteria such as Proteus vulgaris and Alcaligens faecalis at a concentration as low as 10 μg ml^?1. The biosurfactant was also active against methicillin‐resistant Staphylococcus aureus (MRSA) and other MDR pathogenic strains. The chemical identity of this bioactive biosurfactant fraction was determined by post chromatographic detection using thin layer chromatography (TLC) and also by Fourier transform infrared (FTIR) spectroscopy. The antimicrobial HPLC fraction resolved as a single spot on TLC and showed positive reaction with ninhydrin, iodine and rhodamine‐B reagents, indicating its lipopeptide nature. IR absorption by this fraction also showed similar and overlapping patterns with that of other lipopeptide biosurfactants such as surfactin and lichenysin, proving this biosurfactant fraction to be a lipopeptide. The biosurfactant did not show any haemolytic activity when tested on blood agar plates, unlike the lipopeptide biosurfactant surfactin produced by Bacillus subtilis. Conclusions: The biosurfactant produced by marine B. circulans had a potent antimicrobial activity against Gram‐positive and Gram‐negative pathogenic and semi‐pathogenic microbial strains including MDR strains. Only one of the HPLC fractions of the crude biosurfactants was responsible for its antimicrobial action. The antimicrobial lipopeptide biosurfactant fraction was also found to be nonhaemolytic in nature. Significance and impact of the study: This work presents a nonhaemolytic lipopeptide biosurfactant produced by a marine micro‐organism possessing a pronounced antimicrobial action against a wide range of bacteria. There is a high demand for new antimicrobial agents because of the increased resistance shown by pathogenic micro‐organisms against the existing antimicrobial drugs. This study provides an insight into the search of new bioactive molecules from marine micro‐organisms.     

Capacity for biosurfactant production of environmental Pseudomonas and Vibrionaceae growing on carbohydrates

Summary Pseudomonas and Vibrionaceae strains with the capacity to produce biosurfactants when growing on sucrose were isolated from the environment by a simple screening procedure. Agargrown colonies were randomly selected; each colony was suspended in a water droplet on a microscope slide. The tested strain was regarded as positive if the droplet spread over the surface.1779 Pseudomonas and 660 Vibrionaceae isolates were tested; 1% and 0.8% of the isolates, respectively, were positive for biosurfactant production. No production was detected amongst the isolates of a control group of 538 Gram-positive and 1063 Gram-negative strains.Four biosurfactant producing strains were grown in fermenter cultures on a semisynthetic medium using sucrose as carbon and energy source. The terminal concentrations of biosurfactants were in the range of a factor 40 times the critical micelle dilution. One P. fluorescens strain was grown in a carbon limited chemostat (succinate). The biosurfactant production was successively decreasing until it stopped after less than ten generation times.     

Effect of surfactants on pyrene degradation by Pseudomonas fluorescens 29L

The effect of surfactants on pyrene degradation in Pseudomonas fluorescens 29L was investigated. This strain produced 30.1 μM of rhamnolipid equivalents (RE) of biosurfactants on 50 mg of pyrene per liter of medium. The production of biosurfactants was significantly correlated with the water solubility (S _w) of the substrate and the growth rate on it. When chrysene, with a S _w of 2.8 × 10⁻³ mg per liter of water, was the carbon source, 13.1 μM of RE of biosurfactants were produced compared to 10.3 μM of RE of biosurfactants on acenaphthene with a S _w of 1.9 mg per liter of water. No biosurfactants were produced on salicylic acid, catechol, and citrate. All of the strain 29L mutants which grew on pyrene produced biosurfactants while among the mutants which grew on naphthalene, only 88.4% produced biosurfactants. The rhamnolipid mixture, JBR425, inhibited the growth of Strain 29L wild type (WT) and all of its mutants on pyrene. However, these mutants were able to grow in the presence of pyrene when the growth medium was supplemented with 10⁻⁶ mg of emulsan per milliliter of medium. This study implies biosurfactants are produced by Strain 29L as a physiological response to the hydrophobicity of pyrene. The combined use of indigenous biosurfactants and the added biosurfactant, emulsan, is a biotechnology to enhance pyrene degradation by Pseudomonas fluorescens 29L.     

Application of Biosurfactants Produced by Pseudomonas aeruginosa SP4 for Bioremediation of Soils Contaminated by Pyrene

Biosurfactants are considered to facilitate PAHs dissolution in soil slurries for bioremediation applications. In this work, the carbon and nitrogen sources, pH, C/N ratio, and salinity, were considered for optimization of biosurfactant production by Pseudomonas aeruginosa SP4 isolate to enhance pyrene removal from the contaminated soil. Analysis of ANOVA indicated that the carbon source was the most effective factor, followed by pH, nitrogen source, C/N ratio, and salinity. Taguchi experimental design proposed the optimum operating conditions of olive oil, NH₄NO₃, C/N ratio of 5, salinity of 0.5%, and pH 7. Applying the conditions determined by Taguchi design led to a production yield of 452 mg L^?1 (13% improvement) at the optimum conditions. The main characteristics of produced biosurfactant included the critical micelle concentration (CMC) of 60 mg L^?1 and liquid medium surface tension of 29.5 mN m^?1. Produced biosurfactant was used for bioremediation of soil artificially contaminated with 500 mg kg^?1 of pyrene. Following the addition of 250 mg L^?1 biosurfactant, the pyrene removal of 84.6% was obtained compared to 59.8% for control sample without any surfactant.     

Relation between pristinamycins production by Streptomyces pristinaespiralis,power dissipation and volumetric gas–liquid mass transfer coefficient,kLa

During bioreactor cultures, microorganisms are submitted to non-optimal conditions such as nutritional and hydrodynamic stresses which may lead to modifications of the physiological cell response; this is especially true for filamentous microorganisms like Streptomycetes also subjected to significant morphological changes. In the present work, growth and production of pristinamycins by Streptomyces pristinaespiralis in shaking flasks have been related to power dissipation. The filamentous bacteria were grown in different flask conditions with various total and working volumes and at two agitation rates, to test the influence of power dissipation and gas–liquid mass transfer coefficient on growth and antibiotics production. As a first step, computational fluid dynamics–volume of fluid (CFD–VOF) calculations were shown to be able to predict power dissipations for the various operating conditions in Newtonian flow conditions. Then, in non-Newtonian flow conditions (biomass concentration superior to 14 g L⁻¹), the rheological model of Sisko was implemented in CFD simulations for the calculation of the fluid viscosity and then of power dissipation. Whereas microbial growth was correlated to k_La, the antibiotics production onset was linked to the volume mean power dissipation. Once a minimal cell concentration of 15 g L⁻¹ was reached, the concentration of antibiotics was correlated to power dissipation with an optimal range of production, between 5.5 and 8.5 kW m⁻³. Higher power dissipation entailed a drop in production which could be explained by hydrodynamic cell damages.     

Mycoremediation of oil contaminant by Pleurotus florida (P.Kumm) in liquid culture

This study investigated the potential functions of Pleurotus florida (an edible mushroom) in the biodegradation of gas oil at concentrations of 0 (control), 2.5, 5, and 10% (V: V) for 30 days. The gas oil increased dry weight and protein concentration in all treatments (by an average of 19.5 and 108%, respectively). Moreover, the pH, surface tension (ST), and interfacial tension (IFT) were reduced by the mushroom supplementation. The lowest surface tension (31.9 mN m⁻¹) and the highest biosurfactant production belonged to the 10% gas oil treatment (0.845 ± 0.03 mg mL⁻¹). The results demonstrated that the adsorption isotherm agreed well with the Langmuir isotherm. The maximum Langmuir adsorption capacity was calculated at 0.743 mg g⁻¹ wet biomass of P. florida. The fungal supplementation efficiently remedied the total petroleum hydrocarbons (TPHs) by an average of 55% after 30 days. Gas chromatography (GC) analysis revealed that P. florida effectively detoxified C₁₃–C₂₈ hydrocarbons, Pristane, and Phytane, implying its high mycoremediation function. The toxicity test showed that mycoremediation increased the germination by an average of 35.82% ± 8.89 after 30 days. Laccase activity increased significantly with increasing gas oil concentration in the treatments. The maximum laccase activity was obtained in the 10% gas oil treatment (142.25 ± 0.72 U L⁻¹). The presence of pollutants was also associated with induction in the tyrosinase activity when compared to the control. These results underline the high mycoremediation capacity of P. florida through the involvement of biosurfactants, laccase, and tyrosinase.     

Degradation of hydrocarbons and biosurfactant production by Pseudomonas sp. strain LP1

Pseudomonas sp. strain LP1, an organism isolated on the basis of its ability to grow on pyrene, was assayed for its degradative and biosurfactant production potentials when growing on crude, diesel and engine oils. The isolate exhibited specific growth rate and doubling time of 0.304 days⁻¹ and 2.28 days, respectively on crude oil (Escravos Light). The corresponding values on diesel were 0.233 days⁻¹ and 2.97 days, while on engine oil, were 0.122 days⁻¹ and 5.71 days. The organism did not show significant biosurfactant production towards crude oil and diesel, but readily produced biosurfactant on engine oil. The highest Emulsification index (E₂₄) value for the biosurfactant produced by LP1 on engine oil was 80.33 ± 1.20, on day 8 of incubation. Biosurfactant production was growth-associated. The surface-active compound which exhibited zero saline tolerance had its optimal activity at 50°C and pH 2.0.     

Enzymatic production of trans-4-hydroxy-l-proline by proline 4-hydroxylase

Trans-4-hydroxy-l -proline (Hyp) is a useful chiral building block for production of many nutritional supplements and pharmaceuticals. However, it is still challenging for industrial production of Hyp due to heavy environmental pollution and low production efficiency. To establish a green and efficient process for Hyp production, the proline 4-hydroxylase (DsP4H) from Dactylosporangium sp. RH1 was overexpressed and functionally characterized in Escherichia coli BL21(DE3). The recombinant DsP4H with l -proline as a substrate exhibited K_m, k_cat and k_cat/K_m values up to 0.80 mM, 0.52 s⁻¹ and 0.65 s⁻¹·mM⁻¹ respectively. Furthermore, DsP4H showed the highest activity at 35°C and pH 6.5 towards l -proline. The highest enzyme activity of 175.6 U mg⁻¹ was achieved by optimizing culture parameters. Under the optimal transformation conditions in a 5-l fermenter, Hyp titre, conversion rate and productivity were up to 99.9 g l⁻¹, 99.9% and 2.77 g l⁻¹ h⁻¹ respectively. This strategy described here provides an efficient method for production of Hyp and thus has a great potential in industrial application.     

Functional group characterization of lactic bacterial biosurfactants and evaluation of antagonistic actions against clinical isolates of methicillin-resistant Staphylococcus aureus

The present study investigated the antimicrobial and antibiofilm potential of biosurfactants derived from Lactobacillus fermentum Lf1, L. fermentum LbS4 and Lactobacillus plantarum A5 against clinical isolates of methicillin-resistant Staphylococcus aureus (MRSA). The cell wall-bound and intracellular biosurfactants were extracted by solvent extraction method. Fourier-transform infrared spectroscopy-based characterization of biosurfactants revealed the heterogeneous chemical composition involving proteins, fatty acids and carbohydrate moieties in LbS4 and A5, while only the sugar and lipid fractions in Lf1. Fatty acid profiling using Gas chromatography-mass spectrometry indicated hexadecanoic acid and stearic acid as the predominant fatty acids in the biosurfactants of all these strains. Biosurfactants demonstrated dose-dependent antibacterial action against MRSA isolates with the highest inhibition zone diameter (30·0 ± 0·0 to 35·0 ± 0·0 mm) recorded at 400 mg ml⁻¹. Biosurfactants showed an excellent staphylococcal antibiofilm activity by preventing the biofilm formation and disrupting the preformed biofilms. Visual inspection through scanning electron microscopy witnessed the biosurfactants-induced alteration in the cell membrane integrity and subsequent membrane pore formation on staphylococcal cells. Taken together, our findings emphasize the prospects of biomedical applications of biosurfactants as bactericidal and biofilm controlling agents to confront staphylococcal nosocomial infections.     

Effects of oxygen volumetric mass transfer coefficient and pH on lipase production by Staphylococcus warneri EX17

The principal objectives of this study were to evaluate the kinetics of lipase production by Staphylococcus warneri EX17 under different oxygen volumetric mass transfer coefficients (k_La) and pH conditions in submerged bioreactors, using glycerol (a biodiesel by-product) as a carbon source. Cultivations were conducted at different k_La (26, 38, 50, and 83 h⁻¹) and pH values (6.0, 7.0, and 8.0). The optimal k_La and pH were 38 h⁻¹ and 7.0, respectively. Under these conditions, the maximal cell production obtained was 8.0 g/L, and the volumetric and specific lipase production reached high levels of activity, approximately 800 U/L and 150 U/g cell, respectively, after 12 h of cultivation. This result was approximately five times higher than that obtained in the shake flask cultures. The relationship between cell growth and lipase production was found to be associated with growth by the Luedeking-Piret model.     

Biosurfactant-Mediated Biodegradation of Polycyclic Aromatic Hydrocarbons—Naphthalene

The present study is aimed at the naphthalene degradation with and without biosurfactant produced from Pseudomonas aeruginosa isolated from oil-contaminated soil. The present study was carried out to isolate the bacterial strains for the naphthalene degradation and also for biosurfactant production. The isolated strains were screened for their ability to degrade the naphthalene by the methods of optimum growth rate test and for the production of biosurfactants by cetyltrimethylammonium bromide, blood agar medium, and thin-layer chromatography. The present study also focused on the effect of biosurfactant for the degradation of naphthalene by isolate-1. Two bacterial strains were isolated and screened, one for biodegradation and another for biosurfactant production. The second organism was identified as Pseudomonas aeruginosa by 16S rRNA analysis. The purified biosurfactant reduces the surface tension of water and also forms stable emulsification with hexadecane and kerosene. The end product of naphthalene degradation was estimated as salicylic acid equivalent by spectrophotometric method. The results demonstrated that Pseudomonas aeruginosa has the potential to produce biosurfactant, which enhances the biodegradation of naphthalene. The study reflects the potential use of biosurfactants for an effective bioremediation in the management of contaminated soils.     

Effect of different CO2 concentrations on biomass,pigment content,and lipid production of the marine diatom Thalassiosira pseudonana

The marine diatom Thalassiosira pseudonana grown under air (0.04% CO₂) and 1 and 5% CO₂ concentrations was evaluated to determine its potential for CO₂ mitigation coupled with biodiesel production. Results indicated that the diatom cultures grown at 1 and 5% CO₂ showed higher growth rates (1.14 and 1.29 div day⁻¹, respectively) and biomass productivities (44 and 48 mg_AFDWL⁻¹ day⁻¹) than air grown cultures (with 1.13 div day⁻¹ and 26 mg_AFDWL⁻¹ day⁻¹). The increase of CO₂ resulted in higher cell volume and pigment content per cell of T. pseudonana. Interestingly, lipid content doubled when air was enriched with 1–5% CO₂. Moreover, the analysis of the fatty acid composition of T. pseudonana revealed the predominance of monounsaturated acids (palmitoleic-16:1 and oleic-18:1) and a decrease of the saturated myristic acid-14:0 and polyunsaturated fatty acids under high CO₂ levels. These results suggested that T. pseudonana seems to be an ideal candidate for biodiesel production using flue gases.

     

Biosurfactant production and hydrocarbon-degradation by halotolerant and thermotolerant Pseudomonas sp.

A hydrocarbon degrading and biosurfactant producing, strain DHT2, was isolated from oil-contaminated soil. The organism grew and produced biosurfactant when cultured in variety of substrates at salinities up to 6 g l⁻¹ and temperatures up to 45°C. It was capable of utilizing crude oil, fuels, alkanes and PAHs as carbon source across the wide range of temperature (30–45°C) and salinity (0–6%). Over the range evaluated, the salinity and temperature did not influence the degradation of hydrocarbon and biosurfactant productions. Isolate DHT2 was identified as Pseudomonas aeruginosa by analysis of 16S rRNA sequences (100% homology) and biochemical analysis. PCR and DNA hybridization studies revealed that enzymes involved in PAH metabolism were related to the naphthalene dioxygenase pathway. Observation of both tensio-active and emulsifying activities indicated that biosurfactants were produced by DHT2 during growth on both, water miscible and immiscible substrates, including PAH. The biosurfactants lowered the surface tension of medium from 54.9 to 30.2 dN/cm and formed a stable emulsion. The biosurfactant produced by the organism emulsified a range of hydrocarbons with hexadecane as best substrate and toluene was the poorest. These findings further indicate that the isolate could be useful for bioremediation and bio-refining application in petroleum industry.     

Effects of heavy metals on aerobic denitrification by strain Pseudomonas stutzeri PCN-1

Effects of heavy metals on aerobic denitrification have been poorly understood compared with their impacts on anaerobic denitrification. This paper presented effects of four heavy metals (Cd(II), Cu(II), Ni(II), and Zn(II)) on aerobic denitrification by a novel aerobic denitrifying strain Pseudomonas stutzeri PCN-1. Results indicated that aerobic denitrifying activity decreased with increasing heavy metal concentrations due to their corresponding inhibition on the denitrifying gene expression characterized by a time lapse between the expression of the nosZ gene and that of the cnorB gene by PCN-1, which led to lower nitrate removal rate (1.67∼6.67 mg L⁻¹ h⁻¹), higher nitrite accumulation (47.3∼99.8 mg L⁻¹), and higher N₂O emission ratios (5∼283 mg L⁻¹/mg L⁻¹). Specially, promotion of the nosZ gene expression by increasing Cu(II) concentrations (0∼0.05 mg L⁻¹) was found, and the absence of Cu resulted in massive N₂O emission due to poor synthesis of N₂O reductase. The inhibition effect for both aerobic denitrifying activity and denitrifying gene expression was as follows from strongest to least: Cd(II) (0.5∼2.5 mg L⁻¹) > Cu(II) (0.5∼5 mg L⁻¹) > Ni(II) (2∼10 mg L⁻¹) > Zn(II) (25∼50 mg L⁻¹). Furthermore, sensitivity of denitrifying gene to heavy metals was similar in order of nosZ > nirS ≈ cnorB > napA. This study is of significance in understanding the potential application of aerobic denitrifying bacteria in practical wastewater treatment.

     

Optimization of β-mannanase production by Bacillus subtilis US191 using economical agricultural substrates

The Bacillus subtilis US191 strain producing highly thermostable β-mannanase was previously selected as potential probiotic candidate for application as feed supplement in poultry industry. Initially, the level of extracellular β-mannanase production by this strain was 1.48 U ml⁻¹. To improve this enzyme titer, the present study was undertaken to optimize the fermentation conditions through experimental designs and valorization of agro-industrial byproducts. Using the Plackett–Burman design, in submerged fermentation, a set of 14 culture variables was evaluated in terms of their effects on β-mannanase production. Locust bean gum (LBG), soymeal, temperature, and inoculum size were subsequently optimized by response surface methodology using Box–Behnken design. Under optimized conditions (1 g L⁻¹ LBG, 8 g L⁻¹ soymeal, temperature of 30°C and inoculum size of 10¹⁰ CFU ml⁻¹), a 2.59-fold enhancement in β-mannanase titer was achieved. Next, to decrease the enzyme production cost, the effect of partial substitution of LBG (1 g L⁻¹) by agro-industrial byproducts was investigated, and a Taguchi design was applied. This allowed the attaining of a β-mannanase production level of 8.75 U ml⁻¹ in presence of 0.25 g L⁻¹ LBG, 5 g L⁻¹ of coffee residue powder, 5 g L⁻¹ of date seeds powder, and 5 g L⁻¹ of prickly pear seeds powder as mannans sources. Overall, a 5.91-fold improvement in β-mannanase production by B. subtilis US191 was achieved.     

Bacterium Hafnia alvei secretes l-methioninase enzyme: Optimization of the enzyme secretion conditions

I isolated bacteria from blue cheese in order to find bacterial strains secreting l-methioninase enzyme, and optimized the conditions for the most efficient enzyme secretion. The efficient isolate, identified according to the 16S rRNA gene sequence analysis, was Hafnia alvei belonging to Enterobacteriaceae. I confirmed that the H. alvei strain harbored the methionase gene, mdeA (1194 bp). The environmental (pH, temperature) and nutritional (carbon and nitrogen sources and Mg concentration) factors influencing the l-methioninase production of H. alvei were optimized. The highest yield of l-methioninase enzyme was reached after 48 h of incubation when the acidity of the growing medium was adjusted to pH 7.5 and the temperature was 35 °C. The following concentrations of the supplements increased the l-methioninase yield in the medium: galactose (2.0 g L⁻¹), MgSO₄ (0.25 g L⁻¹), l-methionine as an inducer (2.0 g L⁻¹), and l-asparagine as an additional N source (1.5 g L⁻¹). I introduce a bacterial strain of H. alvei that is previously unreported to secrete l-methioninase enzyme and show that a carbon source is a mandatory supplement whereas l-methionine is not a mandatory supplement for l-methioninase enzyme production of H. alvei.