Novel intracellular 3-hydroxybutyrate-oligomer hydrolase in Wautersia eutropha H16

Wautersia eutropha H16 (formerly Ralstonia eutropha) mobilizes intracellularly accumulated poly(3-hydroxybutyrate) (PHB) with intracellular poly(3-hydroxybutyrate) depolymerases. In this study, a novel intracellular 3-hydroxybutyrate-oligomer hydrolase (PhaZc) gene was cloned and overexpressed in Escherichia coli. Then PhaZc was purified and characterized. Immunoblot analysis with polyclonal antiserum against PhaZc revealed that most PhaZc is present in the cytosolic fraction and a small amount is present in the poly(3-hydroxybutyrate) inclusion bodies of W. eutropha. PhaZc degraded various 3-hydroxybutyrate oligomers at a high specific activity and artificial amorphous poly(3-hydroxybutyrate) at a lower specific activity. Native PHB granules and semicrystalline PHB were not degraded by PhaZc. A PhaZ deletion mutation enhanced the deposition of PHB in the logarithmic phase in nutrient-rich medium. PhaZc differs from the hydrolases of W. eutropha previously reported and is a novel type of intracellular 3-hydroxybutyrate-oligomer hydrolase, and it participates in the mobilization of PHB along with other hydrolases.     

Degradation of poly (3-hydroxybutyrate) and its copolymer poly (3-hydroxybutyrate-co-3-hydroxyvalerate) by a marine Streptomyces sp. SNG9

A marine Streptomyces sp. SNG9 was characterized by its ability to utilize poly(3-hydroxybutyrate) (PHB) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate P (3HB-co-HV). The bacterium grew efficiently in a simple mineral liquid medium enriched with 0.1% poly(3-hydroxybutyrate) powder as the sole carbon source. Cells excreted PHB depolymerase and degraded the polymer particles to complete clarity in 4 days. The degradation activity was detectable by the formation of a clear zone around the colony (petri plates) or a clear depth under the colony (test tubes). The expression of PHB depolymerase was repressed by the presence of simple soluble carbon sources. Bacterial degradation of the naturally occurring sheets of poly(3-hydroxybutyrate) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was observed by scanning electron microscopy (SEM). Morphological alterations of the polymers sheets were evidence for bacterial hydrolysis.     

Development of a deletion mutant of Pseudomonas denitrificans that does not degrade 3-hydroxypropionic acid

Pseudomonas denitrificans is a gram-negative bacterium that can produce vitamin B₁₂ under aerobic conditions. Recently, recombinant strains of P. denitrificans overexpressing a vitamin B₁₂-dependent glycerol dehydratase (DhaB) were developed to produce 3-hydroxypropionic acid (3-HP) from glycerol. The recombinant P. denitrificans could produce 3-HP successfully under aerobic conditions without an exogenous supply of vitamin B₁₂, but the 3-HP produced disappeared during extended cultivation due to the 3-HP degradation activity in this strain. This study developed mutant strains of P. denitrificans that do not degrade 3-HP. The following eight candidate enzymes, which might be responsible for 3-HP degradation, were selected, cloned, and studied for their activity in Escherichia coli: four (putative) 3-hydroxyisobutyrate dehydrogenases (3HIBDH), a putative 3-HP dehydrogenase (3HPDH), an alcohol dehydrogenase (ADH), and two choline dehydrogenases (CHDH). Among them, 3HIBDHI, 3HIBDHIV, and 3HPDH exhibited 3-HP degrading activity when expressed heterologously in E. coli. When 3hpdh alone or along with 3hibdhIV were disrupted from P. denitrificans, the mutant P. denitrificans exhibited greatly reduced 3-HP degradation activity that could not grow on 3-HP as the sole carbon and energy source. When the double mutant P. denitrificans Δ3hpdhΔ3hibdhIV was transformed with DhaB, an improved 3-HP yield (0.78 mol/mol) compared to that of the wild-type counterpart (0.45 mol/mol) was obtained from a 24-h flask culture. This study indicates that 3hpdh and 3hibdhIV (to a lesser extent) are mainly responsible for 3-HP degradation in P. denitrificans and their deletion can prevent 3-HP degradation during its production by recombinant P. denitrificans.     

Synthesis of Poly(3-Hydroxybutyrate-Co-3-Hydroxyvalerate) from Methanol and n-Amyl Alcohol by the Methylotrophic Bacteria Paracoccus denitrificans and Methylobacterium extorquens

Strains of two types of methylotrophic bacteria, Paracoccus denitrificans and Methylobacterium extorquens, synthesized the copolyester poly(3-hydroxybutyrate-co-3-hydroxyvalerate) when methanol and n-amyl alcohol were added together to nitrogen-limited medium. The composition of the copolyester differed considerably between the two strains: the copolyester from P. denitrificans was comparatively rich in 3-hydroxyvalerate (3HV). The 3HV content of the copolyester synthesized by this strain increased with increasing concentrations of n-amyl alcohol. Its maximum content was 91.5 mol% under the conditions used. In M. extorquens, the maximum 3HV content was limited to 38.2 mol%. Since n-amyl alcohol served as a substrate for a standard methanol dehydrogenase, the enzyme was proposed to oxidize both methanol and n-amyl alcohol in the first step of copolyester synthesis from these substrates by methanol-grown cells.     

Purification and Characterization of Fungal Poly(3-hydroxybutyrate) Depolymerase from Paecilomyces lilacinus F4-5 and Enzymatic Degradation of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Film

Summary Poly(3-hydroxybutyrate) [P(3HB)] depolymerase was purified from a poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)]-degrading fungus, Paecilomyces lilacinus F4-5 by hydrophobic and ion exchange column chromatography, and showed a molecular mass of 45 kDa. The optimum temperature and pH of the P(3HB) depolymerase were 50 °C and 7.0, respectively. The enzyme was stable for at least 30 min at temperatures below 40 °C, while the activity abruptly decreased over 55 °C. Enzymatic P(3HB-co-3HV) degradation showed a similar degradation pattern to that of film overlaid by fungal hyphae. It reflects that the fungal degradation of P(3HB-co-3HV) in soil is mainly caused by extracellular depolymerases.     

Hydrolytic Degradation of Poly(3-Hydroxybutyrate) and Its Copolymer with 3-Hydroxyvalerate of Different Molecular Weights in vitro

The hydrolytic degradation of polymer films of poly(3-hydroxybutyrate) of different molecular weights and its copolymers with 3-hydroxyvalerate (9 mol % 3-hydroxyvalerate in the poly(3-hydroxybutyrate) chain) of different molecular weights was studied in model conditions in vitro. The changes in the physicochemical properties of the polymers were investigated using different analytical techniques: viscometry, differential scanning calorimetry, gravimetrical method, and water contact angle measurement for polymers. The data showed that in a period of 6 months the weight of polymer films decreased insignificantly. The molecular weight of the samples was reduced significantly; the largest decline (up to 80% of the initial molecular weight of the polymer) was observed in the high-molecular-weight poly(3-hydroxybutyrate). The surface of all investigated polymers became more hydrophilic. In this work, we focus on a mathematical model that can be used for the analysis of the kinetics of hydrolytic degradation of poly(3-hydroxyaklannoate)s by noncatalytic and autocatalytic hydrolysis mechanisms. It was also shown that the degree of crystallinity of some polymers changes differently during degradation in vitro. Thus, the studied polymers can be used to develop biodegradable medical devices such that they can perform their functions for a long period of time.     

Construction of Environmental DNA Libraries in Escherichia coli and Screening for the Presence of Genes Conferring Utilization of 4-Hydroxybutyrate

Environmental DNA libraries from three different soil samples were constructed. The average insert size was 5 to 8 kb and the percentage of plasmids with inserts was approximately 80%. The recombinant Escherichia coli strains (approximately 930,000) were screened for 4-hydroxybutyrate utilization. Thirty-six positive E. coli clones were obtained during the initial screen, and five of them contained a recombinant plasmid (pAH1 to pAH5) which conferred a stable 4-hydroxybutyrate-positive phenotype. These E. coli clones were studied further. All five were able to grow with 4-hydroxybutyrate as sole carbon and energy source and exhibited 4-hydroxybutyrate dehydrogenase activity in crude extracts. Sequencing of pAH5 revealed a gene homologous to the gbd gene of Ralstonia eutropha, which encodes a 4-hydroxybutyrate dehydrogenase. Two other genes (orf1 and orf6) conferring utilization of 4-hydroxybutyrate were identified during subcloning and sequencing of the inserts of pAH1 and pAH3. The deduced orf1 gene product showed similarities to members of the DedA family of proteins. The sequence of the deduced orf6 gene product harbors the fingerprint pattern of enoyl-coenzyme A hydratases/isomerases. The other sequenced inserts of the plasmids recovered from the positive clones revealed no significant similarity to any other gene or gene product whose sequence is available in the National Center for Biotechnology Information databases.     

Identification and Characterization of a Novel Intracellular Poly(3-Hydroxybutyrate) Depolymerase from Bacillus megaterium

A gene that codes for a novel intracellular poly(3-hydroxybutyrate) (PHB) depolymerase, designated PhaZ1, has been identified in the genome of Bacillus megaterium. A native PHB (nPHB) granule-binding assay showed that purified soluble PhaZ1 had strong affinity for nPHB granules. Turbidimetric analyses revealed that PhaZ1 could rapidly degrade nPHB granules in vitro without the need for protease pretreatment of the granules to remove surface proteins. Notably, almost all the final hydrolytic products produced from the in vitro degradation of nPHB granules by PhaZ1 were 3-hydroxybutyric acid (3HB) monomers. Unexpectedly, PhaZ1 could also hydrolyze denatured semicrystalline PHB, with the generation of 3HB monomers. The disruption of the phaZ1 gene significantly affected intracellular PHB mobilization during the PHB-degrading stage in B. megaterium, as demonstrated by transmission electron microscopy and the measurement of the PHB content. These results indicate that PhaZ1 is functional in intracellular PHB mobilization in vivo. Some of these features, which are in striking contrast with those of other known nPHB granule-degrading PhaZs, may provide an advantage for B. megaterium PhaZ1 in fermentative production of the biotechnologically valuable chiral compound (R)-3HB.Polyhydroxyalkanoates (PHAs) are a group of polyesters that are produced by numerous bacteria as carbon and energy storage materials in response to nutritional stress (13, 27, 29). Poly(3-hydroxybutyrate) (PHB) is the most common and intensively studied PHA. Intracellular native PHB (nPHB) granules are composed of a hydrophobic PHB core and a surface layer consisting of proteins and phospholipids (13). The PHB of intracellular nPHB granules is in an amorphous state. When intracellular nPHB granules are exposed to extracellular environments due to cell death and lysis, the amorphous PHB is transformed into a denatured semicrystalline state. nPHB granules subjected to physical damage or solvent extraction to remove the surface layer can also crystallize into denatured PHB (dPHB) (13, 15). Artificial PHB (aPHB) granules, in which PHB is in an amorphous state, can be prepared from semicrystalline dPHB and detergents (1, 11, 23, 31).Various extracellular PHB depolymerases (PhaZs) that are secreted by many PHB-degrading bacteria have been demonstrated to specifically degrade dPHB (13, 14, 37). One exception is that PhaZ7, an extracellular PHB depolymerase secreted by Paucimonas lemoignei, displays unusual substrate specificity for amorphous PHB, with 3-hydroxybutyrate (3HB) oligomers as the main products of enzymatic hydrolysis (7). PhaZ7 exhibits no enzymatic activity toward dPHB. So far, a growing number of intracellular PHB depolymerases have been characterized. The intracellular PHB depolymerase PhaZa1 of Ralstonia eutropha (also called Cupriavidus necator) H16 has recently been established to be especially important for the intracellular mobilization of accumulated PHB (42). The main in vitro hydrolytic products of PhaZa1 degradation of amorphous aPHB are 3HB oligomers (31). PhaZd1, another intracellular PHB depolymerase of R. eutropha H16, shows no significant amino acid similarity to PhaZa1. The in vitro hydrolytic products of PhaZd1 degradation of amorphous aPHB are also 3HB oligomers. A 3HB monomer is rarely detected as a hydrolytic product (1). The intracellular PHB depolymerase PhaZ of Paracoccus denitrificans was reported previously to degrade protease-treated nPHB granules in vitro, with the release of 3HB dimers and oligomers as the main hydrolytic products (6). Recently, we have identified a novel intracellular PHB depolymerase from Bacillus thuringiensis serovar “israelensis” (39). The B. thuringiensis PhaZ shows no significant amino acid similarity to any known PHB depolymerase. This PhaZ has strong amorphous PHB-hydrolyzing activity and can release a considerable amount of 3HB monomers by the hydrolysis of trypsin-treated nPHB granules (39). It is of note that purified PhaZd1 from R. eutropha, PhaZ from P. denitrificans, and PhaZ from B. thuringiensis need pretreatment of nPHB granules with protease to remove surface proteins for PHB degradation (1, 6, 39). They show only very little or no activity toward nPHB granules without trypsin pretreatment. It has been demonstrated previously that these intracellular PHB depolymerases cannot hydrolyze dPHB (1, 31, 39).(R)-3HB, a biotechnologically valuable chiral compound, has been widely used for syntheses of antibiotics, vitamins, and pheromones (3, 30, 38). One way to produce (R)-3HB is heterologous coexpression of a PHB synthetic operon and a gene encoding an amorphous PHB-degrading PhaZ in Escherichia coli (3, 18, 25, 33, 38). A common problem encountered by this method is that oligomeric and dimeric forms of 3HB often constitute a major portion of the products of enzymatic hydrolysis, thus requiring further hydrolysis by 3HB oligomer hydrolase or heating under alkaline conditions to generate 3HB monomers (3, 18, 25, 33).Bacillus megaterium genes involved in the biosynthesis of nPHB granules have been cloned from strain ATCC 11561 and characterized previously (19, 21, 22). A gene encoding the extracellular PHB depolymerase PhaZ from B. megaterium was recently cloned from strain N-18-25-9 (34). However, little is known about B. megaterium genes involved in the intracellular mobilization of PHB. In this study, we have identified in B. megaterium ATCC 11561 an intracellular PHB depolymerase that could rapidly degrade nPHB granules in vitro without the need for trypsin pretreatment of the nPHB granules. Moreover, almost all the in vitro hydrolytic products released from the degradation of amorphous PHB by this PhaZ were 3HB monomers. This PhaZ could also hydrolyze dPHB with the generation of 3HB monomers. Thus, it appears to be a novel intracellular PHB depolymerase and may have promising potential for biotechnological application in the production of enantiomerically pure (R)-3HB monomers.     

Degradation of poly (3-hydroxybutyrate) and its copolymer poly (3-hydroxybutyrate-co-3-hydroxyvalerate) by a marine Streptomyces sp. SNG9.

A marine Streptomyces sp. SNG9 was characterized by its ability to utilize poly(3-hydroxybutyrate) (PHB) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate P (3HB-co-HV). The bacterium grew efficiently in a simple mineral liquid medium enriched with 0.1% poly(3-hydroxybutyrate) powder as the sole carbon source. Cells excreted PHB depolymerase and degraded the polymer particles to complete clarity in 4 days. The degradation activity was detectable by the formation of a clear zone around the colony (petri plates) or a clear depth under the colony (test tubes). The expression of PHB depolymerase was repressed by the presence of simple soluble carbon sources. Bacterial degradation of the naturally occurring sheets of poly(3-hydroxybutyrate) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was observed by scanning electron microscopy (SEM). Morphological alterations of the polymers sheets were evidence for bacterial hydrolysis.     

Assay of Poly(3-Hydroxybutyrate) Depolymerase Activity and Product Determination

Two methods for accurate poly(3-hydroxybutyrate) (PHB) depolymerase activity determination and quantitative and qualitative hydrolysis product determination are described. The first method is based on online determination of NaOH consumption rates necessary to neutralize 3-hydroxybutyric acid (3HB) and/or 3HB oligomers produced during the hydrolysis reaction and requires a pH-stat apparatus equipped with a software-controlled microliter pump for rapid and accurate titration. The method is universally suitable for hydrolysis of any type of polyhydroxyalkanoate or other molecules with hydrolyzable ester bonds, allows the determination of hydrolysis rates of as low as 1 nmol/min, and has a dynamic capacity of at least 6 orders of magnitude. By applying this method, specific hydrolysis rates of native PHB granules isolated from Ralstonia eutropha H16 were determined for the first time. The second method was developed for hydrolysis product identification and is based on the derivatization of 3HB oligomers into bromophenacyl derivates and separation by high-performance liquid chromatography. The method allows the separation and quantification of 3HB and 3HB oligomers up to the octamer. The two methods were applied to investigate the hydrolysis of different types of PHB by selected PHB depolymerases.     

Genetic Analysis of Comamonas acidovorans Polyhydroxyalkanoate Synthase and Factors Affecting the Incorporation of 4-Hydroxybutyrate Monomer

The polyhydroxyalkanoate (PHA) synthase gene of Comamonas acidovorans DS-17 (phaC_Ca) was cloned by using the synthase gene of Alcaligenes eutrophus as a heterologous hybridization probe. Complete sequencing of a 4.0-kbp SmaI-HindIII (SH40) subfragment revealed the presence of a 1,893-bp PHA synthase coding region which was followed by a 1,182-bp β-ketothiolase gene (phaA_Ca). Both the translated products of these genes showed significant identity, 51.1 and 74.2%, respectively, to the primary structures of the products of the corresponding genes in A. eutrophus. The arrangement of PHA biosynthesis genes in C. acidovorans was also similar to that in A. eutrophus except that the third gene, phaB, coding for acetoacetyl-coenzyme A reductase, was not found in the region downstream of phaA_Ca. The cloned fragment complemented a PHA-negative mutant of A. eutrophus, PHB⁻4, resulting in poly-3-hydroxybutyrate accumulation of up to 73% of the dry cell weight when fructose was the carbon source. The heterologous expression enabled the incorporation of 4-hydroxybutyrate (4HB) and 3-hydroxyvalerate monomers. The PHA synthase of C. acidovorans does not appear to show any preference for 4-hydroxybutyryl-coenzyme A as a substrate. This leads to the suggestion that in C. acidovorans, it is the metabolic pathway, and not the specificity of the organism’s PHA synthase, that drives the incorporation of 4HB monomers, resulting in the efficient accumulation of PHA with a high 4HB content.     

Biosynthesis of Poly(3-Hydroxybutyrate) and Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) and Its Regulation in Bacteria

Recent data on the biosynthesis of poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and its regulation in bacteria are reviewed, with special emphasis on the properties and regulation of the relevant enzymes and their genes. Some conditions promoting the synthesis of PHB and PHBV by natural, mutant, and recombinant producers are considered.     

Degradation of poly(3-hydroxybutyrate) by poly(3-hydroxybutyrate) depolymerase from Alcaligenes faecalis T1

The extracellular poly(3-hydroxybutyrate) depolymerase purified from Alcaligenes faecalis T₁ has two disulfide bonds, one of which appears to be necessary for the full enzyme activity. This depolymerase hydrolyzed not only hydrophobic poly(3-hydroxybutyrate) but also water-soluble trimer and larger oligomers of D-(−)-3-hydroxybutyrate, regardless of their solubilities in water. Kinetic analyses with oligomers of various sizes indicated that the substrate cleaving site of the enzyme consisted of four subsites with individual affinities for monomer units of the substrate. Analyses of the hydrolytic products of oligomers, which had labeled D-(−)-3-hydroxybutyrate at the hydroxy terminus, showed that the enzyme cleaved only the second ester linkage from the hydroxy terminus of the trimer and tetramer, and acted as an endo-type hydrolase toward the pentamer and higher oligomers. The enzyme appeared to have a hydrophobic site which interacted with poly(3-hydroxybutyrate) and determined the affinity of the enzyme toward the hydrophobic substrate.     

Degradation of microbial polyester poly(3-hydroxybutyrate) in environmental samples and in culture

Poly(3-hydroxybutyrate) [P(3HB)] test-pieces prepared from the polymer produced by Azotobacter chroococcum were degraded in natural environments like soil, water, compost and sewage sludge incubated under laboratory conditions. Degradation in terms of % weight loss of the polymer was maximum (45%) in sewage sludge after 200 days of incubation at 30°C. The P(3HB)-degrading bacterial cultures (36) isolated from degraded test-pieces showed different degrees of degradation in polymer overlayer method. The extent of P(3HB) degradation increases up to 12 days of incubation and was maximum at 30°C for majority of the cultures. For most efficient cultures the optimum concentration of P(3HB) for degradation was 0.3% (w/v). Supplementation of soluble carbon sources like glucose, fructose and arabinose reduced the degradation while it was almost unaffected with lactose. Though the cultures degraded P(3HB) significantly, they were comparatively less efficient in utilizing copolymer of 3-hydroxybutyrate and 3-hydroxyvalerate [P(3HB-co-3HV)].     

Production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in recombinant Corynebacterium glutamicum using propionate as a precursor

Lipopolysaccharides free P[3-hydroxybutyrate (3HB)-co-3-hydroxyvalerate (3HV)] production was achieved using recombinant Corynebacterium glutamicum harboring polyhydroxyalkanoate (PHA) biosynthetic genes from Ralstonia eutropha. Cells grown on glucose with feeding of propionate as a precursor of 3HV unit accumulated 8-47 wt% of P(3HB-co-3HV). The 3HV fraction in the copolymer was varied from 0 to 28 mol% depending on the propionate concentrations.     

Nuclear Magnetic Resonance Studies of Poly(3-Hydroxybutyrate) and Polyphosphate Metabolism in Alcaligenes eutrophus

The metabolic pathways of poly(3-hydroxybutyrate) (PHB) and polyphosphate in the microorganism Alcaligenes eutrophus H16 were studied by ¹H, ¹³C, and ³¹P nuclear magnetic resonance (NMR) spectroscopy and by conventional analytical techniques. A. eutrophus cells accumulated two storage polymers of PHB and polyphosphate in the presence of carbon and phosphate sources under aerobic conditions after exhaustion of nitrogen sources. The solid-state cross-polarization/magic-angle spinning ¹³C NMR spectroscopy was used to study the biosynthetic pathways of PHB and other cellular biomass components from ¹³C-labeled acetate. The solid-state ¹³C NMR analysis of lyophilized intact cells grown on [1-¹³C]acetate indicated that the carbonyl carbon of acetate was selectively incorporated both into the carbonyl and methine carbons of PHB and into the carbonyl carbons of proteins. The ³¹P NMR analysis of A. eutrophus cells in suspension showed that the synthesis of intracellular polyphosphate was closely related to the synthesis of PHB. The roles of PHB and polyphosphate in the cells were studied under conditions of carbon, phosphorus, and nitrogen source starvation. Under both aerobic and anaerobic conditions PHB was degraded, whereas little polyphosphate was degraded. The rate of PHB degradation under anaerobic conditions was faster than that under aerobic conditions. Under anaerobic conditions, acetate and 3-hydroxybutyrate were produced as the major extracellular metabolites. The implications of this observation are discussed in connection with the regulation of PHB and polyphosphate metabolism in A. eutrophus.     

Poly(3-Hydroxybutyrate) Synthesis Genes in Azotobacter sp. Strain FA8

Genes responsible for the synthesis of poly(3-hydroxybutyrate) (PHB) in Azotobacter sp. FA8 were cloned and analyzed. A PHB polymerase gene (phbC) was found downstream from genes coding for β-ketothiolase (phbA) and acetoacetyl-coenzyme A reductase (phbB). A PHB synthase mutant was obtained by gene inactivation and used for genetic studies. The phbC gene from this strain was introduced into Ralstonia eutropha PHB-4 (phbC-negative mutant), and the recombinant accumulated PHB when either glucose or octanoate was used as a source of carbon, indicating that this PHB synthase cannot incorporate medium-chain-length hydroxyalkanoates into PHB.     

Effects of Mutations in the Substrate-Binding Domain of Poly[(R)-3-Hydroxybutyrate] (PHB) Depolymerase from Ralstonia pickettii T1 on PHB Degradation

Poly[(R)-3-hydroxybutyrate] (PHB) depolymerase from Ralstonia pickettii T1 (PhaZ_RpiT1) adsorbs to denatured PHB (dPHB) via its substrate-binding domain (SBD) to enhance dPHB degradation. To evaluate the amino acid residues participating in dPHB adsorption, PhaZ_RpiT1 was subjected to a high-throughput screening system consisting of PCR-mediated random mutagenesis targeted to the SBD gene and a plate assay to estimate the effects of mutations in the SBD on dPHB degradation by PhaZ_RpiT1. Genetic analysis of the isolated mutants with lowered activity showed that Ser, Tyr, Val, Ala, and Leu residues in the SBD were replaced by other residues at high frequency. Some of the mutant enzymes, which contained the residues replaced at high frequency, were applied to assays of dPHB degradation and adsorption, revealing that those residues are essential for full activity of both dPHB degradation and adsorption. These results suggested that PhaZ_RpiT1 adsorbs on the surface of dPHB not only via hydrogen bonds between hydroxyl groups of Ser in the enzyme and carbonyl groups in the PHB polymer but also via hydrophobic interaction between hydrophobic residues in the enzyme and methyl groups in the PHB polymer. The L441H enzyme, which displayed lower dPHB degradation and adsorption abilities, was purified and applied to a dPHB degradation assay to compare it with the wild-type enzyme. The kinetic analysis of the dPHB degradation suggested that lowering the affinity of the SBD towards dPHB causes a decrease in the dPHB degradation rate without the loss of its hydrolytic activity for the polymer chain.     

Anaerobic degradation of poly-3-hydroxybutyrate and poly-3-hydroxybutyrate-co-3-hydroxyvalerate

The anaerobic degradation of the polyesters poly-3-hydroxybutyrate (PHB) and poly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) was investigated with special regard to intermediate products, kinetics, and yields. During the degradation of PHBV acetate, propionate, n-butyrate, and n-valerate were detected. Additionally, 3-hydroxybutyrate and 3-hydroxyvalerate and four dimeric esters of these two molecules were identified by GC-MS measurements. Three different test systems for the anaerobic degradation of polyesters were studied. It was not possible to get reproducible results by means of the Anaerobic Sturm-test, a simple system based on carbon dioxide measurement. Secondly, a system based on the GC measurement of accumulated organic acids was investigated. A degradation of 90% in two days was calculated by a carbon balance. Best results were reached with the third test system based on the measurement of methane with a gas meter. A degradation of 99% was observed within 30 days.     

A Forward-Design Approach to Increase the Production of Poly-3-Hydroxybutyrate in Genetically Engineered Escherichia coli

Biopolymers, such as poly-3-hydroxybutyrate (P(3HB)) are produced as a carbon store in an array of organisms and exhibit characteristics which are similar to oil-derived plastics, yet have the added advantages of biodegradability and biocompatibility. Despite these advantages, P(3HB) production is currently more expensive than the production of oil-derived plastics, and therefore, more efficient P(3HB) production processes would be desirable. In this study, we describe the model-guided design and experimental validation of several engineered P(3HB) producing operons. In particular, we describe the characterization of a hybrid phaCAB operon that consists of a dual promoter (native and J23104) and RBS (native and B0034) design. P(3HB) production at 24 h was around six-fold higher in hybrid phaCAB engineered Escherichia coli in comparison to E. coli engineered with the native phaCAB operon from Ralstonia eutropha H16. Additionally, we describe the utilization of non-recyclable waste as a low-cost carbon source for the production of P(3HB).