Relationship of Species-Specific Filament Levels to Filamentous Bulking in Activated Sludge

To examine the relationship between activated-sludge bulking and levels of specific filamentous bacteria, we developed a statistics-based quantification method for estimating the biomass levels of specific filaments using 16S rRNA-targeted fluorescent in situ hybridization (FISH) probes. The results of quantitative FISH for the filament Sphaerotilus natans were similar to the results of quantitative membrane hybridization in a sample from a full-scale wastewater treatment plant. Laboratory-scale reactors were operated under different flow conditions to develop bulking and nonbulking sludge and were bioaugmented with S. natans cells to stimulate bulking. Instead of S. natans, the filament Eikelboom type 1851 became dominant in the reactors. Levels of type 1851 filaments extending out of the flocs correlated strongly with the sludge volume index, and extended filament lengths of approximately 6 × 10⁸ μm ml⁻¹ resulted in bulking in laboratory-scale and full-scale activated-sludge samples. Quantitative FISH showed that high levels of filaments occurred inside the flocs in nonbulking sludge, supporting the “substrate diffusion limitation” hypothesis for bulking. The approach will allow the monitoring of incremental improvements in bulking control methods and the delineation of the operational conditions that lead to bulking due to specific filaments.     

Substrate uptake tests and quantitative FISH show differences in kinetic growth of bulking and non-bulking activated sludge

The competition between filaments and floc formers in activated sludge has been historically described using kinetic selection. However, recent studies have suggested that bacterial storage may also be an important factor in microbial selection, since the dynamic nature of substrate flows into wastewater treatment plants elicit transient responses from microorganisms. Respirometry-based kinetic selection should thus be reevaluated by considering cell storage, and a more reliable method should be developed to include bacterial storage in the analysis of growth of filaments and floc formers in activated sludge. In this study, we applied substrate uptake tests combined with metabolic modeling to determine the growth rates, yields and maintenance coefficients of bulking and non-bulking activated sludge developed in lab scale reactors under feast and famine conditions. The results of quantitative fluorescence in situ hybridization (FISH) showed that the filaments Eikelboom Type 1851, Type 021N, and Thiothrix nivea were dominant in bulking sludge, comprising 42.0 % of mixed liquor volatile suspended solids (MLVSS), with 61.6% of the total filament length extending from flocs into bulk solution. Only low levels of Type 1851 filament length (4.9% of MLVSS) occurred in non-bulking sludge, 83.0% of which grew inside the flocs. The kinetic parameters determined from the substrate uptake tests were consistent with those from respirometry and showed that filamentous bulking sludge had lower growth rates and maintenance coefficients than non-bulking sludge. These results provide support for growth kinetic differences in explaining the competitive strategy of filamentous bacteria.     

Relationship of species-specific filament levels to filamentous bulking in activated sludge

To examine the relationship between activated-sludge bulking and levels of specific filamentous bacteria, we developed a statistics-based quantification method for estimating the biomass levels of specific filaments using 16S rRNA-targeted fluorescent in situ hybridization (FISH) probes. The results of quantitative FISH for the filament Sphaerotilus natans were similar to the results of quantitative membrane hybridization in a sample from a full-scale wastewater treatment plant. Laboratory-scale reactors were operated under different flow conditions to develop bulking and nonbulking sludge and were bioaugmented with S. natans cells to stimulate bulking. Instead of S. natans, the filament Eikelboom type 1851 became dominant in the reactors. Levels of type 1851 filaments extending out of the flocs correlated strongly with the sludge volume index, and extended filament lengths of approximately 6 x 10(8) micro m ml(-1) resulted in bulking in laboratory-scale and full-scale activated-sludge samples. Quantitative FISH showed that high levels of filaments occurred inside the flocs in nonbulking sludge, supporting the "substrate diffusion limitation" hypothesis for bulking. The approach will allow the monitoring of incremental improvements in bulking control methods and the delineation of the operational conditions that lead to bulking due to specific filaments.     

Effects of synthetic polymer on the filamentous bacteria in activated sludge

Filamentous bulking is one of the solid-liquid separation problems always seen in activated sludge process. The addition of synthetic polymer is always one of the popular ways for the treatment plant operator to immediately solve the poor sludge settling problem. Therefore, it may be interesting to understand the effects of synthetic polymer on the filamentous bacteria in activated sludge. In this study, synthetic polymer was applied to a lab-scale wastewater treatment system with the filamentous bulking problem. The population structure of filamentous bacteria and sludge characteristics were investigated under different conditions. When synthetic polymer was added into the system, it was found that poor sludge settleability caused by filamentous bulking was temporarily solved and filamentous branches growing outside the flocs were damaged or inhibited. However, filamentous growth was still observed inside the flocs. After the addition of polymer was halted, filamentous branches extended out of the flocs immediately. Very serious filamentous bulking occurred and sludge settleability became much worse than that occurring before the addition of polymer. And, it took several weeks for the system to return to normal operation.     

Overexpression in Escherichia coli of the AT-rich trpA and trpB genes from the hyperthermophilic archaeon Pyrococcus furiosus

Micromanipulation was used to obtain an isolate (BEN 52) of Eikelboom Type 1851 from a bulking activated sludge plant. Its 16S rDNA sequence reveals its closest relative is 'Roseiflexus castenholzii', a member of the phylum 'Chloroflexi', class 'Chloroflexi', previously called the green non-sulfur bacteria. The 16S rRNA targeted oligonucleotide probe designed for fluorescence in situ hybridisation against this sequence successfully identified filamentous bacteria with the morphological features of Type 1851 in activated sludge samples from plants in several countries and different operational configurations.     

Identity, abundance and ecophysiology of filamentous Chloroflexi species present in activated sludge treatment plants

Filamentous Chloroflexi species are often present in activated sludge wastewater treatment plants in relatively low numbers, although bulking incidences caused by Chloroflexi filaments have been observed. A new species-specific gene probe for FISH was designed and using phylum-, subdivision-, morphotype 1851- and species-specific gene probes, the abundance of Chloroflexi filaments were monitored in samples from 126 industrial wastewater treatment plants from five European countries. Chloroflexi filaments were present in 50% of the samples, although in low quantities. In most treatment plants the filaments could only be identified with phylum or subdivision probes, indicating the presence of great undescribed biodiversity. The ecophysiology of various Chloroflexi filaments was investigated by a suite of in situ methods. The experiments revealed that Chloroflexi constituted a specialized group of filamentous bacteria only active under aerobic conditions consuming primarily carbohydrates. Many exo-enzymes were excreted, e.g. chitinase, glucuronidase and galactosidase, suggesting growth on complex polysaccharides. The surface of Chloroflexi filaments appeared to be hydrophilic compared to other filaments present. These results are generally supported by physiological studies of two new isolates. Based on the results obtained in this study, the potential role of filamentous Chloroflexi species in activated sludge is discussed.     

Sludge bulking impact on relevant bacterial populations in a full-scale municipal wastewater treatment plant

We have investigated the changes of microbial community structures and the concomitant performance in two biological wastewater treatment systems (conventional and inverted A²/O processes) over a whole cycle of sludge bulking. A low level of filament abundance was observed during non-bulking period, with types 0092 and 0041 as the dominant filamentous bacteria. With the increase of the sludge volume index values from 76 (73) to 275 (300) mg/L, the filament abundance estimated by microscopic examination increased from 1 (few) to 5 (abundant), with Microthrix parvicella becoming the dominant filament bacteria. Sludge bulking resulted in a significant shift in bacterial compositions from Proteobacteria to Actinobacteria dominance, characterized by the significant presence of filamentous M. parvicella (from not detected to higher than 60% of clones) and decrease of the dominant Betaproteobacterial population (from higher than 40% to less than 1%). Important relevant bacterial populations including polyphosphate-accumulating organism (PAO, Candidatus Accumulibacter phosphatis), ammonia-oxidizing bacteria (AOB, Nitrosomonas), nitrite-oxidizing bacteria (NOB, Nitrospira) and denitrifying bacteria (Thauera) were absent under the serious bulking condition. Accumulation of nitrite and ammonia was observed during serious bulking, while the phosphorus removal performance was not decreased because M. parvicella could behave as a PAO.     

Changes in the microbial community structure of filaments and floc formers in response to various carbon sources and feeding patterns

Filamentous bulking is a complicated problem in wastewater treatment plants treating various wastewaters, leading to the deterioration of the settling properties and the effluent quality. This study systematically investigated long-term effects of various carbon sources and feeding patterns on the growth of filamentous bacteria, in order to reveal the mechanism of filamentous bulking. Sludge volume index (SVI), microscopic observations, staining (Gram and Neisser staining), scan electron microscopic, and fluorescent in situ hybridization (FISH) were used to monitor the bulking and track the changes of microbial morphology and community structure of activated sludge in six lab-scale sequencing batch reactors (SBRs) fed with different carbon sources. Filamentous bulking was not observed in all SBRs under anoxic feeding pattern with a short fill time, in which SVI remained below 150 mL/g. In contrast, serious bulking (SVI?>?500 mL/g) occurred under aerobic feeding pattern when fed with ethanol, propionate, acetate, and glucose, in which Thiothrix and Sphaerotilus natans proliferated as dominant filaments. Compared to glucose-fed reactor, relatively light bulking was caused in starch-fed reactor with the growth of Nostocoida limicola II. In addition, flocs in starch-fed reactor were more open and fluffy than flocs formed on readily biodegradable substrates. Finally, a framework integrating kinetic selection, diffusion selection, storage selection, and protozoa capture mechanism was proposed to explain filamentous bulking.     

In situ studies of the phylogeny and physiology of filamentous bacteria with attached growth

Among the filamentous bacteria occasionally causing bulking problems in activated sludge treatment plants, three morphotypes with attached microbial growth are common, Eikelboom Type 0041, Type 1851 and Type 1701. A better knowledge of the phylogeny and physiology of these filamentous bacteria is necessary in order to develop control strategies for bulking. In this study we have used a combination of fluorescence in situ hybridization (FISH) and microautoradiography (MAR) to investigate the identity and in situ physiology of the Type 0041-morphotype and its attached bacteria in two wastewater treatment plants. Identification and enumeration of Type 0041 using group-specific 16S rRNA-targeted FISH probes revealed that approximately 15% of the filaments hybridized with a gene probe specific for the TM7 group, a recently recognized major lineage in the bacterial domain. All other filaments morphologically identified as Type 0041 only hybridized to the general bacterial EUB338-probe, indicating that they probably do not belong to commonly isolated bacterial phyla such as the Proteobacteria, Firmicutes, Actinobacteria and Bacteroidetes, for which group-specific probes were used. The phylogenetic heterogeneity of Type 0041 again highlights the inadequacy of a morphology-based classification system. Like the filaments, most of the attached microbial cells were not identified beyond their affiliation to the Bacteria using the group-specific FISH probes. However, several different bacterial phyla were represented in the identified fraction suggesting that the attached microorganisms are phylogenetically diverse. The study of the in situ physiology of Type 0041 using MAR-FISH revealed that both the filaments and the attached bacteria on Type 0041 were versatile in the use of organic substrates and electron acceptors. It was observed that all Type 0041 could consume glucose, but none of the filaments were able to consume acetate under any conditions tested, in contrast to some of the attached bacteria. No significant physiological differences were found between TM7-positive and TM7-negative Type 0041 filaments, and only minor differences were observed between the two treatment plants tested. These are the first data on the physiology of the almost entirely uncharacterized TM7 phylum and show that TM7 filamentous bacteria can uptake carbon substrates under aerobic and anaerobic conditions.     

Phage-host associations in a full-scale activated sludge plant during sludge bulking

Sludge bulking, a notorious microbial issue in activated sludge plants, is always accompanied by dramatic changes in the bacterial community. Despite large numbers of phages in sludge systems, their responses to sludge bulking and phage-host associations during bulking are unknown. In this study, high-throughput sequencing of viral metagenomes and bacterial 16S rRNA genes were employed to characterize viral and bacterial communities in a sludge plant under different sludge conditions (sludge volume index (SVI) of 180, 132, and 73 ml/g). Bulking sludges (SVI > 125 ml/g) taken about 10 months apart exhibited similar bacterial and viral composition. This reflects ecological resilience of the sludge microbial community and indicates that changes in viral and bacterial populations correlate closely with each other. Overgrowth of “Candidatus Microthrix parvicella” led to filamentous bulking, but few corresponding viral genotypes were identified. In contrast, sludge viromes were characterized by numerous contigs associated with “Candidatus Accumulibacter phosphatis,” suggesting an abundance of corresponding phages in the sludge viral community. Notably, while nitrifiers (mainly Nitrosomonadaceae and Nitrospiraceae) declined significantly along with sludge bulking, their corresponding viral contigs were identified more frequently and with greater abundance in the bulking viromes, implying that phage-mediated lysis might contribute to the loss of autotrophic nitrifiers under bulking conditions.     

Microbial composition of the activated sludge of Moscow wastewater treatment plants

The contribution of the major technologically important microbial groups (ammonium- and nitrite-oxidizing, phosphate-accumulating, foam-inducing, and anammox bacteria, as well as planctomycetes and methanogenic archaea) was characterized for the aeration tanks of the Moscow wastewater treatment facilities. FISH investigation revealed that aerobic sludge were eubacterial communities; the metabolically active archaea contributed insignificantly. Stage II nitrifying microorganisms and planctomycetes were significant constituents of the bacterial component of activated sludges, with Nitrobacter spp. being the dominant nitrifiers. No metabolically active anammox bacteria were revealed in the sludge from aeration tanks. The sludge from the aeration tanks using different wastewater treatment technologies were found to have differing characteristics. Abundance of the nitrifying and phosphate-accumulating bacteria in the sludge generally correlated with microbial activity in microcosms and with efficiency of nitrogen and phosphorus removal from wastewater. The highest microbial numbers and activity were found in the sludge of the tanks operating according to the technologies developed in the universities of Hannover and Cape Town. The activated sludge from the Novokur’yanovo facilities, where abundant growth of filamentous bacteria resulted in foam formation, exhibited the lowest activity. The group of foaming bacteria included Gordonia spp. and Acinetobacter spp utilizing petroleum and motor oils, Sphaerotilus spp. utilizing unsaturated fatty acids, and Candidatus ‘Microthrix parvicella’. Thus, the data on abundance and composition of metabolically active microorganisms obtained by FISH may be used for the technological control of wastewater treatment.     

In situ detection of protein-hydrolysing microorganisms in activated sludge

Protein hydrolysis plays an important role in the transformation of organic matter in activated sludge wastewater treatment plants, but no information is currently available regarding the identity and ecophysiology of protein-hydrolysing organisms (PHOs). In this study, fluorescence in situ enzyme staining with casein and bovine serum albumin conjugated with BODIPY dye was applied and optimized to label PHOs in activated sludge plants. A strong fluorescent labeling of the surface of microorganisms expressing protease activity was achieved. Metabolic inhibitors were applied to inhibit the metabolic activity to prevent uptake of the fluorescent hydrolysates by oligopeptide-consuming bacteria. In five full-scale, nutrient-removing activated sludge plants examined, the dominant PHOs were always different morphotypes of filamentous bacteria and the epiflora attached to many of these. The PHOs were identified by FISH using a range of available oligonucleotide probes. The filamentous PHOs belonged to the candidate phylum TM7, the phylum Chloroflexi and the class Betaproteobacteria. In total they comprised 1-5% of the bacterial biovolume. Most of the epiflora-PHOs hybridized with probe SAP-309 targeting Saprospiraceae in the phylum Bacteroidetes and accounted for 8-12% of the total bacterial biovolume in most plants and were thus an important and dominant part of the microbial communities.     

Effect of dissolved oxygen concentration on sludge settleability

This laboratory study presents a detailed evaluation of the effects of dissolved oxygen concentration and accumulation of storage polymers on sludge settleability in activated sludge systems with an aerobic selector. The oxygen and substrate availability regime were simulated in laboratory sequencing batch reactor systems. The experiments showed that low dissolved oxygen concentration (1.1 mg O₂ l^–1) had a strong negative effect on sludge settleability, leading to the proliferation of filamentous bacteria (Thiothrix spp., Type 021N and Type 1851). This negative effect was stronger at high chemical oxygen demand loading rate. This indicates that a compartmentalised (plug flow) aerobic contact tank, designed at short hydraulic residence time to guarantee a strong substrate gradient, with low dissolved oxygen concentration, might be worse for sludge settleability than an "overdesigned" completely mixed contact tank. Contrary to the general hypothesis, the maximum specific acetate uptake rate, poly--hydroxybutyrate production rate, and resistance to short starvation periods are similar in both poor- and well-settling sludge. The results of this study support our previous hypothesis on the importance of substrate gradients for the development of filamentous structures in biological flocs, from soluble organic substrate gradients to dissolved oxygen gradients in sludge flocs.     

Genomic insights into Candidatus Amarolinea aalborgensis gen. nov., sp. nov., associated with settleability problems in wastewater treatment plants

Settleability of particles in activated sludge systems can be impaired by an overgrowth of filamentous bacteria, a problem known as bulking. These filaments are often members of the phylum Chloroflexi, sometimes reaching abundances in excess of 30% of the biovolume. The uncultured Chloroflexi phylotype, Candidatus Amarolinea, has been observed in high abundances in Danish full-scale activated sludge systems by 16S rRNA gene amplicon surveys, where it has been associated with bulking. In this study, fluorescence in situ hybridization was applied to confirm their high abundance, filamentous morphology, and contribution to the interfloc bridging that characterizes filamentous bulking. Furthermore, genome-centric metagenomics using both Illumina and Oxford Nanopore sequencing was used to obtain a near complete population genome (5.7 Mbp) of the Ca. Amarolinea phylotype, which belongs to the proposed novel family Amarolineaceae within the order Caldilineales of Chloroflexi. Annotation of the genome indicated that the phylotype is capable of aerobic respiration, fermentation, and dissimilatory nitrate reduction to ammonia. The genome sequence also gives a better insight into the phylogenetic and evolutionary relationships of the organism. The name Candidatus Amarolinea aalborgensis is proposed for the species.     

‘Morphological shifts’ in filamentous bacteria isolated from activated sludge processes

Summary This study aimed at isolating filamentous bacteria from full-scale activated sludge processes and studying them in pure culture. Three cultures were isolated using conventional microbiological techniques. The isolates were positively identified as Gordonia amarae, Thiothrix nivea and Type 1863/Acinetobacter spp., using fluorescent in situ hybridization (FISH) with 16S rRNA-targeted oligonucleotide probes. However, a ‘morphological shift’ from filamentous to single-cell form was observed in pure culture. The application of fluorescent in situ hybridization (FISH) showed filamentous bacteria to be much more diverse in their ability to adapt to their changing enviroments. Pure culture studies of filamentous bacteria form the basis for application in full-scale activated sludge plants. It therefore remains important that the taxonomic status of filamentous bacteria be determined.     

Amyloid-Like Adhesins Produced by Floc-Forming and Filamentous Bacteria in Activated Sludge

Amyloid proteins (fimbriae or other microbial surface-associated structures) are expressed by many types of bacteria, not yet identified, in biofilms from various habitats, where they likely are of key importance to biofilm formation and biofilm properties. As these amyloids are potentially of great importance to the floc properties in activated sludge wastewater treatment plants (WWTP), the abundance of amyloid adhesins in activated sludge flocs from different WWTP and the identity of bacteria producing these were investigated. Amyloid adhesins were quantified using a combination of conformationally specific antibodies targeting amyloid fibrils, propidium iodide to target all fixed bacterial cells, confocal laser scanning microscopy, and digital image analysis. The biovolume fraction containing amyloid adhesins ranged from 10 to 40% in activated sludge from 10 different WWTP. The identity of bacteria producing amyloid adhesins was determined using fluorescence in situ hybridization with oligonucleotide probes in combination with antibodies or thioflavin T staining. Among the microcolony-forming bacteria, amyloids were primarily detected among Alpha- and Betaproteobacteria and Actinobacteria. A more detailed analysis revealed that many denitrifiers (from Thauera, Azoarcus, Zoogloea, and Aquaspirillum-related organisms) and Actinobacteria-related polyphosphate-accumulating organisms most likely produced amyloid adhesins, whereas nitrifiers did not. Many filamentous bacteria also expressed amyloid adhesins, including several Alphaproteobacteria (e.g., Meganema perideroedes), some Betaproteobacteria (e.g., Aquaspirillum-related filaments), Gammaproteobacteria (Thiothrix), Bacteroidetes, Chloroflexi (e.g., Eikelboom type 1851), and some foam-forming Actinobacteria (e.g., Gordonia amarae). The results show that amyloid adhesins were an abundant component of activated sludge extracellular polymeric substances and seem to have unexpected, divers functions.     

In situ detection of starch-hydrolyzing microorganisms in activated sludge

Polysaccharides constitute a significant part of the organic matter in domestic wastewater and their hydrolysis plays an important role in their transformation and nutrient removal in activated sludge wastewater treatment plants. However, there is no information available about the identity, ecophysiology, and abundance of starch-hydrolyzing organisms (SHOs) in these plants. In this study, fluorescence in situ enzyme staining with BODIPY fluorescein-labeled starch was applied and optimized to label SHOs expressing alpha-amylase in activated sludge plants. Fluorescence on the surface of bacteria expressing alpha-amylase activity was clearly visualized. In 11 full-scale nutrient-removing wastewater treatment plants examined, the morphotypes of the dominant SHOs were always cocci in clusters of tetrads, short rods in clusters, and some filamentous organisms. The SHOs were identified by combining in situ enzyme staining and FISH using a range of available oligonucleotide probes. All the SHOs observed were Actinobacteria, and most had the phenotype of polyphosphate-accumulating organisms closely related to the genus Tetrasphaera in the family Intrasporangiaceae. The SHOs were present in most of the wastewater treatment plants examined and comprised, in total, up to 11% of bacterial biovolume and thus formed an important part of the microbial communities.     

Filamentous Alphaproteobacteria associated with bulking in industrial wastewater treatment plants

The phylogeny and distribution of filamentous Alphaproteobacteria, morphologically similar to “Nostocoida limicola” and Eikelboom Type 021N that cause the solids separation problem of bulking in industrial activated sludge plants is described here. A combination of culture-dependent and culture-independent molecular methods has characterized 5 novel species. 16S rRNA targeted oligonucleotide probes were designed for their in situ identification by fluorescence in situ hybridisation (FISH) and used to monitor their presence in 86 WWTPs treating different industrial effluents in four European countries. The involvement of these bacteria in bulking in these plants was confirmed. Filaments hybridising with the ALF-968 probe for the Alphaproteobacteria were present in 65% of the WWTPs examined. They were dominant and therefore probably responsible for bulking in 25.5% of them. The heterogeneous filamentous alphaproteobacterial populations in these communities could be completely identified after application of the oligonucleotide probes used in this study in 91% of the plants containing them. The only filamentous Alphaproteobacteria retrieved in pure culture was isolated from three different industrial WWTPs plants. None of these isolates could grow anaerobically on glucose or denitrify, but all grew aerobically and heterotrophically on a range of carbon sources. Although morphologically similar to the Eikelboom Type 021N morphotype, they were not involved in sulphur metabolism. These bacteria accumulated lipidic storage granules that were associated with their presence under the unbalanced growth conditions existing in these plants.     

Control of Microthrix parvicella growth in activated sludge

Abstract Effects of aerobic and anaerobic conditions on the growth of Microthrix parvicella in the activated sludge were studied to prevent bulking caused by this filamentous bacterium. The study was conducted on a pilot plant with selector and the data were compared with those observed in a full scale plant subjected to severe bulking due to a massive growth of M. parvicella . Both plants were fed with the same settled waste water. A substantial suppression of the growth of M. parvicella was observed in only the experiments where returned activated sludge was mixed with waste water under aerobic conditions. Both the number of filaments and the sludge volume index (SVI) were lower in the pilot plant than in the full scale plant. Under anerobic conditions, the selector was not able to improve the settleability and avoid the growth of M. parvicella .