Physiological and chemical investigations into microbial degradation of synthetic Poly(cis-1,4-isoprene)

Streptomyces coelicolor 1A and Pseudomonas citronellolis were able to degrade synthetic high-molecular-weight poly(cis-1,4-isoprene) and vulcanized natural rubber. Growth on the polymers was poor but significantly greater than that of the nondegrading strain Streptomyces lividans 1326 (control). Measurement of the molecular weight distribution of the polymer before and after degradation showed a time-dependent increase in low-molecular-weight polymer molecules for S. coelicolor 1A and P. citronellolis, whereas the molecular weight distribution for the control (S. lividans 1326) remained almost constant. Three degradation products were isolated from the culture fluid of S. coelicolor 1A grown on vulcanized rubber and were identified as (6Z)-2,6-dimethyl-10-oxo-undec-6-enoic acid, (5Z)-6-methyl-undec-5-ene-2,9-dione, and (5Z,9Z)-6, 10-dimethyl-pentadec-5,9-diene-2,13-dione. An oxidative pathway from poly(cis-1,4-isoprene) to methyl-branched diketones is proposed. It includes (i) oxidation of an aldehyde intermediate to a carboxylic acid, (ii) one cycle of beta-oxidation, (iii) oxidation of the conjugated double bond resulting in a beta-keto acid, and (iv) decarboxylation.     

Physiological and Chemical Investigations into Microbial Degradation of Synthetic Poly(cis-1,4-isoprene)

Streptomyces coelicolor 1A and Pseudomonas citronellolis were able to degrade synthetic high-molecular-weight poly(cis-1,4-isoprene) and vulcanized natural rubber. Growth on the polymers was poor but significantly greater than that of the nondegrading strain Streptomyces lividans 1326 (control). Measurement of the molecular weight distribution of the polymer before and after degradation showed a time-dependent increase in low-molecular-weight polymer molecules for S. coelicolor 1A and P. citronellolis, whereas the molecular weight distribution for the control (S. lividans 1326) remained almost constant. Three degradation products were isolated from the culture fluid of S. coelicolor 1A grown on vulcanized rubber and were identified as (6Z)-2,6-dimethyl-10-oxo-undec-6-enoic acid, (5Z)-6-methyl-undec-5-ene-2,9-dione, and (5Z,9Z)-6,10-dimethyl-pentadec-5,9-diene-2,13-dione. An oxidative pathway from poly(cis-1,4-isoprene) to methyl-branched diketones is proposed. It includes (i) oxidation of an aldehyde intermediate to a carboxylic acid, (ii) one cycle of β-oxidation, (iii) oxidation of the conjugated double bond resulting in a β-keto acid, and (iv) decarboxylation.     

Characterization of the 101-kilobase-pair megaplasmid pKB1, isolated from the rubber-degrading bacterium Gordonia westfalica Kb1

The complete sequence of the circular 101,016-bp megaplasmid pKB1 from the cis-1,4-polyisoprene-degrading bacterium Gordonia westfalica Kb1, which represents the first described extrachromosomal DNA of a member of this genus, was determined. Plasmid pKB1 harbors 105 open reading frames. The predicted products of 46 of these are significantly related to proteins of known function. Plasmid pKB1 is organized into three functional regions that are flanked by insertion sequence (IS) elements: (i) a replication and putative partitioning region, (ii) a putative metabolic region, and (iii) a large putative conjugative transfer region, which is interrupted by an additional IS element. Southern hybridization experiments revealed the presence of another copy of this conjugational transfer region on the bacterial chromosome. The origin of replication (oriV) of pKB1 was identified and used for construction of Escherichia coli-Gordonia shuttle vectors, which was also suitable for several other Gordonia species and related genera. The metabolic region included the heavy-metal resistance gene cadA, encoding a P-type ATPase. Expression of cadA in E. coli mediated resistance to cadmium, but not to zinc, and decreased the cellular content of cadmium in this host. When G. westfalica strain Kb1 was cured of plasmid pKB1, the resulting derivative strains exhibited slightly decreased cadmium resistance. Furthermore, they had lost the ability to use isoprene rubber as a sole source of carbon and energy, suggesting that genes essential for rubber degradation are encoded by pKB1.     

Involvement of two latex-clearing proteins during rubber degradation and insights into the subsequent degradation pathway revealed by the genome sequence of Gordonia polyisoprenivorans strain VH2

The increasing production of synthetic and natural poly(cis-1,4-isoprene) rubber leads to huge challenges in waste management. Only a few bacteria are known to degrade rubber, and little is known about the mechanism of microbial rubber degradation. The genome of Gordonia polyisoprenivorans strain VH2, which is one of the most effective rubber-degrading bacteria, was sequenced and annotated to elucidate the degradation pathway and other features of this actinomycete. The genome consists of a circular chromosome of 5,669,805 bp and a circular plasmid of 174,494 bp with average GC contents of 67.0% and 65.7%, respectively. It contains 5,110 putative protein-coding sequences, including many candidate genes responsible for rubber degradation and other biotechnically relevant pathways. Furthermore, we detected two homologues of a latex-clearing protein, which is supposed to be a key enzyme in rubber degradation. The deletion of these two genes for the first time revealed clear evidence that latex-clearing protein is essential for the microbial utilization of rubber. Based on the genome sequence, we predict a pathway for the microbial degradation of rubber which is supported by previous and current data on transposon mutagenesis, deletion mutants, applied comparative genomics, and literature search.     

Novel type of heme-dependent oxygenase catalyzes oxidative cleavage of rubber (poly-cis-1,4-isoprene)

An extracellular protein with strong absorption at 406 nm was purified from cell-free culture fluid of latex-grown Xanthomonas sp. strain 35Y. This protein was identical to the gene product of a recently characterized gene cloned from Xanthomonas sp., as revealed by determination of m/z values and sequencing of selected isolated peptides obtained after trypsin fingerprint analysis. The purified protein degraded both natural rubber latex and chemosynthetic poly(cis-1,4-isoprene) in vitro by oxidative cleavage of the double bonds of poly(cis-1,4-isoprene). 12-oxo-4,8-dimethyltrideca-4,8-diene-1-al (m/z 236) was identified and unequivocally characterized as the major cleavage product, and there was a homologous series of minor metabolites that differed from the major degradation product only in the number of repetitive isoprene units between terminal functions, CHO-CH2--and--H2-COCH3. An in vitro enzyme assay for oxidative rubber degradation was developed based on high-performance liquid chromatography analysis and spectroscopic detection of product carbonyl functions after derivatization with dinitrophenylhydrazone. Enzymatic cleavage of rubber by the purified protein was strictly dependent on the presence of oxygen; it did not require addition of any soluble cofactors or metal ions and was optimal around pH 7.0 at 40 degrees C. Carbon monoxide and cyanide inhibited the reaction; addition of catalase had no effect, and peroxidase activity could not be detected. The purified protein was specific for natural rubber latex and chemosynthetic poly(cis-1,4-isoprene). Analysis of the amino acid sequence deduced from the cloned gene (roxA [rubber oxygenase]) revealed the presence of two heme-binding motifs (CXXCH) for covalent attachment of heme to the protein. Spectroscopic analysis confirmed the presence of heme, and approximately 2 mol of heme per mol of RoxA was found.     

Isolation and characterization of Streptomyces, Actinoplanes, and Methylibium strains that are involved in degradation of natural rubber and synthetic poly(cis-1,4-isoprene)

Rubber-degrading bacteria were screened for the production of clearing zones around their colonies on latex overlay agar plates. Novel three bacteria, Streptomyces sp. strain LCIC4, Actinoplanes sp. strain OR16, and Methylibium sp. strain NS21, were isolated. To the best of our knowledge, this is the first report on the isolation of a Gram-negative rubber-degrading bacterium other than γ-proteobacteria. Gel permeation chromatography analysis revealed that these strains degraded poly(cis-1,4-isoprene) to low-molecular-weight products. The occurrence of aldehyde groups in the degradation products by NS21 was suggested by staining with Schiff's reagent and 1H-nuclear magnetic resonance spectroscopy. The lcp gene of LCIC4, which showed 99% amino acid sequence identity with that of Streptomyces sp. strain K30, was cloned, and contained a putative twin-arginine motif at its N terminus. It is located next to oxiB, which is estimated to be responsible for oxidation of degradation intermediate of rubber in K30. Southern hybridization analysis using LCIC4 lcp probe revealed the presence of a lcp-homolog in OR16. These results suggest that the lcp-homologs are involved in rubber degradation in LCIC4 and OR16.     

Identification and characterization of genes from Streptomyces sp. strain K30 responsible for clear zone formation on natural rubber latex and poly(cis-1,4-isoprene) rubber degradation

Streptomyces sp. strain K30 was isolated from soil next to a city high way in Münster (Germany) according to its ability to degrade natural and synthetic poly(cis-1,4-isoprene) rubber and to form clear zones on natural rubber latex agar plates. The clear zone forming phenotype was used to clone the responsible gene by phenotypic complementation of a clear zone negative mutant. An open reading frame (lcp) of 1,191 bp was identified, which was preceded by a putative signal sequence and restored the capability to form clear zones on natural rubber latex in the mutant. The putative translation product exhibited strong homologies (50% aa identity) to a putative secreted protein from Streptomyces coelicolor strain A3(2), another clear zone forming strain. Heterologous expression of lcp of Streptomyces sp. strain K30 in Streptomyces lividans strain TK23 enabled the latter to form clear zones on latex-overlay agar plates and to accumulate a degradation product of about 12 kDa containing aldehyde groups. Two ORFs putatively encoding a heterodimeric molybdenum hydroxylase (oxiAB) were identified downstream of lcp in Streptomyces sp. strain K30 strain which exerted a positive effect on clear zone formation and enabled the strain to oxidize the resulting aldehydes. Heterologous expression of a fragment harboring lcp plus oxiAB in S. lividans TK23 resulted in accumulation of aldehydes only in the presence of 10 mM tungstate. Determination of protein content during cultivation on poly(cis-1,4-isoprene) revealed an increase of the cellular protein, and gel permeation chromatography analysis indicated a shift of the molecular weight distribution of the rubber to lower values in the transgenic S. lividans strains and in the wild type, thus confirming utilization and degradation of rubber. Therefore, for the first time, genes responsible for clear zone formation on natural rubber latex and synthetic cis-1,4-polyisoprene degradation in Gram-positive bacteria were identified and characterized.     

Reaction of 2'-deoxyribonucleosides with cis- and trans-1,4-dioxo-2-butene

cis-1,4-Dioxo-2-butene is a toxic metabolite of furan, while the trans-isomer is a product of deoxyribose oxidation in DNA. It has recently been reported that both cis- and trans-1,4-dioxo-2-butene react with the 2'-deoxynucleosides dC, dG, and dA to form novel diastereomeric oxadiazabicyclo(3.3.0)octaimine adducts. We have now extended these studies with kinetic and spectroscopic analyses of the reactions of cis- and trans-1,4-dioxo-2-butene, as well as the identification of novel adducts of dA. The reaction of dC with trans-1,4-dioxo-2-butene was observed to be nearly quantitative and produced two interchanging diastereomers with a second-order rate constant of 3.66 x 10(-2)M(-1)s(-1), which is nearly 10-fold faster than the reaction with the cis-isomer (3.74 x 10(-3)M(-1)s(-1)). HPLC analyses of reactions of 1,4-dioxo-2-butene with both dA and 9-methyladenine (pH 7.4, 37 degrees C) revealed multiple products including a novel pair of closely eluting fluorescent species of identical mass ([M+H] m/z 420), each of which contains two molecules of 1,4-dioxo-2-butene, and a more abundant but unstable and non-fluorescent species ([M+H] m/z 414). Partial structural characterization of the fluorescent adducts of dA revealed the presence of the oxadiazabicyclo(3.3.0)octaimine ring system common to the dC adducts. These results support the genotoxic potential of furan metabolites and products of deoxyribose oxidation.     

cis-1,4-diaminocyclohexane-Pt(II) and -(IV) adducts with DNA bases and nucleosides

A series of new platinum(II) and platinum(IV) adducts of type [P(II)(cis-1,4-DACH)LCl]NO(3,) where cis-1,4-DACH=cis-1,4-diaminocyclohexane, and L=9-ethylguanine, 1-methylcytosine, adenine, adenosine, cytosine, cytidine, guanine, and [Pt(IV)(cis-1,4-DACH)Ltrans-(X)(2)Cl]NO(3), (where Y=hydroxo or acetato), were synthesized and characterized by elemental analysis, infrared spectroscopy, and 1H and 195Pt nuclear magnetic resonance spectroscopy.     

Oligo(2'-O-tetrahydropyranylribonucleotides): hybridization properties and nuclease resistance

Oligo(2'-tetrahydropyranylribonucleotides) and their analogues containing a 3'-3'-internucleotide bond at the 3'-terminus are nuclease-resistant and possess rather high affinity toward RNA, the main target in the antisense approach.     

Origin of Reovirus Oligo(A)

Reovirus contains about 1,200 molecules per virion of oligo(A) of chain length 10 to 15 nucleotides in addition to the 10 double-stranded genome segments. Virions purified from infected BHK, HeLa, or L cells had similar amounts of oligo(A) of the same composition, indicating that it is a virus-specific product. Although conversion of virions to cores by chymotryptic digestion resulted in an almost complete loss of oligo(A) and a marked decrease in infectivity, the infectivity could be partially restored by adsorbing cores to cells in the presence of Kaopectate. Core-infected cells yielded virions that contained a normal complement of oligo(A). The results indicate that oligo(A) is not essential for infectivity or required as a primer/template for its own synthesis.     

Polymorphism of linoleic acid (cis-9, cis-12-octadecadienoic acid) and alpha-linolenic acid (cis-9, cis-12, cis-15-octadecatrienoic acid)

Crystallization and polymorphic properties of linoleic acid (cis-9, cis-12-Octadecadienoic acid) (LA) and alpha-linolenic acid (cis-9, cis-12, cis-15-Octadecatrienoic acid) (alpha-LNA) have been studied by optical microscopy, differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The DSC analyses presented three polymorphs in LA, and two polymorphs in alpha-LNA. The XRD patterns of the higher- and lower-temperature forms in LA and alpha-LNA showed orthorhombic O'(//)+O-like and O'(//) subcell, which were similar to those of alpha- and gamma-forms of mono-unsaturated fatty acids, respectively. From the solvent crystallization of LA and alpha-LNA in acetonitrile, single crystals of the higher temperature polymorphs have been obtained. The crystal habits of truncated rhombic shape were also similar to those of alpha-forms of the mono-unsaturated fatty acids. The enthalpy and entropy values of fusion and dissolution of the alpha-forms of LA, alpha-LNA and oleic acid showed that the two values decreased with increasing number of the cis-double bond.     

RNase P-Guiding Peptide Conjugates of Oligo(2'-O-methylribonucleotides) as Prospective Antibacterial Agents

Russian Journal of Bioorganic Chemistry - A novel variant of the synthesis of 3'- and 5'-peptide conjugates of oligo(2'-O-methylribonucleotides) has been developed using thiol-maleimide...     

Oligo(2'-methylribonucleotides) and their derivatives. I. Automated synthesis of oligo(2'-methylribonucleotides) via H-phosphonates

New representatives of the [ H-phosphonate's class, N-acyl-2'-O-methyl-5'-O-dimethoxytritylribonucleoside 3'-H-phosphonates, were synthesized via salicylchlorophosphine and used for the automatic synthesis of oligo(2'-O-methylribonucleotides). The efficiency of the method was demonstrated by the synthesis of a number of pyrimidine oligomers with chain length from 6 to 15 monomers.