Influence of biosurfactants from probiotic bacteria on formation of biofilms on voice prostheses

Biofilms were grown on preconditioned voice prostheses with biosurfactants obtained from probiotic bacteria Lactococcus lactis 53 and Streptococcus thermophilus A in an artificial throat model. Both biosurfactants greatly reduced microbial numbers on prostheses and also induced a decrease in the airflow resistance that occurs on voice prostheses after biofilm formation. This study presents a promising strategy for prolonging the lifespan of voice prostheses.     

Voice Prosthetic Biofilm Formation and Candida Morphogenic Conversions in Absence and Presence of Different Bacterial Strains and Species on Silicone-Rubber

Morphogenic conversion of Candida from a yeast to hyphal morphology plays a pivotal role in the pathogenicity of Candida species. Both Candida albicans and Candida tropicalis, in combination with a variety of different bacterial strains and species, appear in biofilms on silicone-rubber voice prostheses used in laryngectomized patients. Here we study biofilm formation on silicone-rubber by C. albicans or C. tropicalis in combination with different commensal bacterial strains and lactobacillus strains. In addition, hyphal formation in C. albicans and C. tropicalis, as stimulated by Rothia dentocariosa and lactobacilli was evaluated, as clinical studies outlined that these bacterial strains have opposite results on the clinical life-time of silicone-rubber voice prostheses. Biofilms were grown during eight days in a silicone-rubber tube, while passing the biofilms through episodes of nutritional feast and famine. Biofilms consisting of combinations of C. albicans and a bacterial strain comprised significantly less viable organisms than combinations comprising C. tropicalis. High percentages of Candida were found in biofilms grown in combination with lactobacilli. Interestingly, L. casei, with demonstrated favorable effects on the clinical life-time of voice prostheses, reduced the percentage hyphal formation in Candida biofilms as compared with Candida biofilms grown in absence of bacteria or grown in combination with R. dentocariosa, a bacterial strain whose presence is associated with short clinical life-times of voice prostheses.     

Influence of different combinations of bacteria and yeasts in voice prosthesis biofilms on air flow resistance

Laryngectomized patients use silicone rubber voice prostheses to rehabilitate their voice. However, biofilm formation limits the lifetime of voice prostheses. The presence of particular combinations of bacterial and yeast strains in voice prosthesis biofilms has been suggested to be crucial for causing valve failure. In order to identify combinations of bacterial and yeast strains causative to failure of voice prostheses, the effects of various combinations of bacterial and yeast strains on air flow resistances of Groningen button voice prostheses were determined. Biofilms were grown on Groningen button voice prostheses by inoculating so-called artificial throats with various combinations of clinically relevant bacterial and yeast strains. After 3 days, all throats were perfused three times daily with 250 ml phosphate buffered saline and at the end of each day the artificial throats were filled with growth medium for half an hour. After 7 days, the air flow resistances of the prostheses were measured. These air flow resistances were expressed relative to the air flow resistances of the same prostheses prior to biofilm formation. This study shows that biofilms causing strong increases in air flow resistance (26 to 28 cm water.s/l) comprised combinations of microorganisms, involving Candida tropicalis, Staphylococcus aureus and Rothia dentocariosa. This revised version was published online in June 2006 with corrections to the Cover Date.     

Adhesive interactions between voice prosthetic yeast and bacteria on silicone rubber in the absence and presence of saliva

Biofilms on silicone rubber voice prostheses are the major cause for frequent failure and replacement of these devices. The presence of both bacterial strains and yeast has been suggested to be crucial for the development of voice prosthetic biofilms. Adhesive interactions between Candida albicans, Candida krusei, and Candida tropicalis with 14 bacterial strains, all isolated from explanted voice prostheses were investigated in a parallel plate flow chamber. Bacteria were first allowed to adhere to silicone rubber, after which the flow chamber was perfused with yeast, suspended either in saliva or buffer. Generally, when yeast were adhering from buffer and saliva, the presence of adhering bacteria suppressed adhesion of yeast. In saliva, Rothia dentocariosa and Staphylococcus aureus enhanced adhesion of yeast, especially of C. albicans. This study shows that bacterial adhesion mostly reduces subsequent adhesion of yeast, while only a few bacterial strains stimulate adhesion of yeast, provided salivary adhesion mediators are present. Interestingly, different clinical studies have identified R. dentocariosa and S. aureus in biofilms on explanted prostheses of patients needing most frequent replacement, while C. albicans is one of the yeast generally held responsible for silicone rubber deterioration.     

Production of rhamnolipids by a Pseudomonas alcaligenes strain

Brazil is one of the main producers of palm oil (Ellaus guineeusis). It is a low-cost product that has some interesting industrial qualities, such as its use as the raw material for the production of glycerin and soap as well as its use in the preparation of food. Some renewable sources and agroindustrial wastes have been used extensively in research on the production of biosurfactants of the Pseudomonas strains. However, to our knowledge, no studies have been published on the use of palm oil as a substrate for the synthesis of biosurfactants by Pseudomonas alcaligenes. This paper describes the production and characterization of biosurfactants synthesized by a strain of P. alcaligenes PCL previously isolated from soil that was contaminated with crude-oil. Furthermore, the paper presents the optimization of the production of biological surface-active compounds by applying experimental design tools and their capacity to emulsify hydrocarbons.     

Inhibition of Streptococcus mutans NS Adhesion to Glass with and without a Salivary Conditioning Film by Biosurfactant- Releasing Streptococcus mitis Strains

The release of biosurfactants by adhering microorganisms as a defense mechanism against other colonizing strains on the same substratum surface has been described previously for probiotic bacteria in the urogenital tract, the intestines, and the oropharynx but not for microorganisms in the oral cavity. Two Streptococcus mitis strains (BA and BMS) released maximal amounts of biosurfactants when they were grown in the presence of sucrose and were harvested in the early stationary phase. The S. mitis biosurfactants reduced the surface tensions of aqueous solutions to about 30 to 40 mJ m⁻². Biochemical and physicochemical analyses revealed that the biosurfactants released were glycolipids. An acid-precipitated fraction was extremely surfactive and was identified as a rhamnolipidlike compound. In a parallel-plate flow chamber, the number of Streptococcus mutans NS cells adhering to glass with and without a salivary conditioning film in the presence of biosurfactant-releasing S. mitis BA and BMS (surface coverage, 1 to 4%) was significantly reduced compared with the number of S. mutans NS cells adhering to glass in the absence of S. mitis. S. mutans NS adhesion in the presence of non-biosurfactant-releasing S. mitis BA and BMS was not reduced at all. In addition, preadsorption of isolated S. mitis biosurfactants to glass drastically reduced the adhesion of S. mutans NS cells and the strength of their bonds to glass, as shown by the increased percentage of S. mutans NS cells detached by the passage of air bubbles through the flow chamber. Preadsorption of the acid-precipitated fraction inhibited S. mutans adhesion up to 80% in a dose-responsive manner. These observations indicate that S. mitis plays a protective role in the oral cavity and protects against colonization of saliva-coated surfaces by cariogenic S. mutans.     

Production,characterization and bioactivities of biosurfactants from newly isolated strictly halophilic bacteria

Eight distinct halophilic bacteria isolated from extreme saline soil samples of Khewra Salt Mines, Pakistan, were investigated for biosurfactant production. Isolates were identified by physiological, phenotypic and genetic characterization. Using 16S rDNA sequence analysis, the strains MB590, MB591, MB593, MB594, MB595 and MB596 were identified as Halomonas elongata, MB588 as Halobacillus karajiensis, and MB589 as Alkalibacillus almallahensis. Preliminary screening of biosurfactant production in halophilic bacteria was done by multiple screening assays. All biosurfactants showed significant emulsification properties and remarkably low surface tension values (up to 16.5 dynes/cm). Structural characterization of partially purified biosurfactants using Gas chromatography–mass spectrometry (GC–MS) and Fourier-transform infrared spectroscopy (FTIR) techniques indicated different fatty acids, glycolipid derivatives and a novel antimicrobial peptide furanomycin. These biosurfactants exhibited strong bioactivities against bacterial/fungal pathogens i.e. Klebsiella pneumoniae (86.5 %), Staphylococcus aureus (97.75 %), Bacillus subtilis (97 %), Enterococcus faecalis (97.6 %), E. coli (54.5 %), Aspergillus niger (87.75 %), Aspergillus fumigatus (93.1 %), Aspergillus flavus (80.4 %), and Fusarium solani (89.05 %). Additionally, biosurfactants also showed 85 % free radical scavenging activity indicating their antioxidant potential. The present study revealed the potential of halophilic bacterial biosurfactants as effective antimicrobial agents against various pathogens, and their possible applications in the biomedical field.     

Biofilms on tracheoesophageal voice prostheses: a confocal laser scanning microscopy demonstration of mixed bacterial and yeast biofilms

The aim of this study was to demonstrate the presence of yeast and bacterial biofilms on the surface of tracheoesophageal voice prostheses (TVPs) by a double-staining technique with confocal laser scanning microscopy (CLSM). Biofilms of 12 removed TVPs were visualized by scanning electron microscopy, then stained with ConA-FITC and propidium iodide for CLSM. Microbial identification was by partial 16S rRNA gene analysis and ITS-2 sequence analysis. Microbial biofilms on the TVPs consisted of bacteria and filamentous cells. Bacterial cells were attached to the filamentous and unicellular yeast cells, thus forming a network. Sequence analyses of six voice prostheses identified the presence of a variety of bacterial and yeast species. In vivo studies showed that Klebsiella oxytoca and Micrococcus luteus efficiently attached to Candida albicans. CLSM with double fluorescence staining can be used to demonstrate biofilm formations composed of a mixture of yeast and bacterial cells on the surface of TVPs.     

Importance of 3-Hydroxy Fatty Acid Composition of Lipopeptides for Biosurfactant Activity

Biosurfactant production may be an economic approach to improving oil recovery. To obtain candidates most suitable for oil recovery, 207 strains, mostly belonging to the genus Bacillus, were tested for growth and biosurfactant production in medium with 5% NaCl under aerobic and anaerobic conditions. All strains grew aerobically with 5% NaCl, and 147 strains produced a biosurfactant. Thirty-five strains grew anaerobically with 5% NaCl, and two produced a biosurfactant. In order to relate structural differences to activity, eight lipopeptide biosurfactants with different specific activities produced by various Bacillus species were purified by a new protocol. The amino acid compositions of the eight lipopeptides were the same (Glu/Gln:Asp/Asn:Val:Leu, 1:1:1:4), but the fatty acid compositions differed. Multiple regression analysis showed that the specific biosurfactant activity depended on the ratios of both iso to normal even-numbered fatty acids and anteiso to iso odd-numbered fatty acids. A multiple regression model accurately predicted the specific biosurfactant activities of four newly purified biosurfactants (r² = 0.91). The fatty acid composition of the biosurfactant produced by Bacillus subtilis subsp. subtilis strain T89-42 was altered by the addition of branched-chain amino acids to the growth medium. The specific activities of biosurfactants produced in cultures with different amino acid additions were accurately predicted by the multiple regression model derived from the fatty acid compositions (r² = 0.95). Our work shows that many strains of Bacillus mojavensis and Bacillus subtilis produce biosurfactants and that the fatty acid composition is important for biosurfactant activity.     

Rhamnolipid-Induced Removal of Lipopolysaccharide from Pseudomonas aeruginosa: Effect on Cell Surface Properties and Interaction with Hydrophobic Substrates

Little is known about the interaction of biosurfactants with bacterial cells. Recent work in the area of biodegradation suggests that there are two mechanisms by which biosurfactants enhance the biodegradation of slightly soluble organic compounds. First, biosurfactants can solubilize hydrophobic compounds within micelle structures, effectively increasing the apparent aqueous solubility of the organic compound and its availability for uptake by a cell. Second, biosurfactants can cause the cell surface to become more hydrophobic, thereby increasing the association of the cell with the slightly soluble substrate. Since the second mechanism requires very low levels of added biosurfactant, it is the more intriguing of the two mechanisms from the perspective of enhancing the biodegradation process. This is because, in practical terms, addition of low levels of biosurfactants will be more cost-effective for bioremediation. To successfully optimize the use of biosurfactants in the bioremediation process, their effect on cell surfaces must be understood. We report here that rhamnolipid biosurfactant causes the cell surface of Pseudomonas spp. to become hydrophobic through release of lipopolysaccharide (LPS). In this study, two Pseudomonas aeruginosa strains were grown on glucose and hexadecane to investigate the chemical and structural changes that occur in the presence of a rhamnolipid biosurfactant. Results showed that rhamnolipids caused an overall loss in cellular fatty acid content. Loss of fatty acids was due to release of LPS from the outer membrane, as demonstrated by 2-keto-3-deoxyoctonic acid and sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis and further confirmed by scanning electron microscopy. The amount of LPS loss was found to be dependent on rhamnolipid concentration, but significant loss occurred even at concentrations less than the critical micelle concentration. We conclude that rhamnolipid-induced LPS release is the probable mechanism of enhanced cell surface hydrophobicity.     

Prevention of Candida albicans Biofilm Formation by Covalently Bound Dimethylaminoethylmethacrylate and Polyethylenimine

Candida albicans biofilms are a major cause of voice prosthesis deterioration in laryngectomized patients. The aim of this study was to produce a surface capable of inhibiting C. albicans biofilm formation. Dimethylaminoethylmethacrylate (DMAEMA) and polyethylenimine (PEI) moieties were covalently bound to the surface of polydimethylsiloxane (PDMS) or polymethylmethacrylate (PMMA) and subsequently quaternized. Physicochemical characterization of the grafted surfaces was carried out and their effect on C. albicans cell numbers was assessed using a modified Robbins device to grow the biofilms. Covalently bound quaternized polyDMAEMA (polyDMAEMAq) and PEI (PEIq) inhibited biofilm growth, with reductions up to 92%. Our approach may show promise for future application in medical devices such as catheters and prostheses.     

Assessment of synergistic antibacterial activity of combined biosurfactants revealed by bacterial cell envelop damage

Besides potential surface activity and some beneficial physical properties, biosurfactants express antibacterial activity. Bacterial cell membrane disrupting ability of rhamnolipid produced by Pseudomonas aeruginosa C2 and a lipopeptide type biosurfactant, BS15 produced by Bacillus stratosphericus A15 was examined against Staphylococcus aureus ATCC 25923 and Escherichia coli K8813. Broth dilution technique was followed to examine minimum inhibitory concentration (MIC) of both the biosurfactants. The combined effect of rhamnolipid and BS15 against S. aureus and E. coli showed synergistic activity by expressing fractional inhibitory concentration (FIC) index of 0.43 and 0.5. Survival curve of both the bacteria showed bactericidal activity after treating with biosurfactants at their MIC obtained from FIC index study as it killed > 90% of initial population. The lesser value of MIC than minimum bactericidal concentration (MBC) of the biosurfactants also supported their bactericidal activity against both the bacteria. Membrane permeability against both the bacteria was supported by amplifying protein release, increasing of cell surface hydrophobicity, withholding capacity of crystal violet dye and leakage of intracellular materials. Finally cell membrane disruption was confirmed by scanning electron microscopy (SEM). All these experiments expressed synergism and effective bactericidal activity of the combination of rhamnolipid and BS15 by enhancing the bacterial cell membrane permeability. Such effect of the combination of rhamnolipid and BS15 could make them promising alternatives to traditional antibiotic in near future.     

Effect of surfactants on pyrene degradation by Pseudomonas fluorescens 29L

The effect of surfactants on pyrene degradation in Pseudomonas fluorescens 29L was investigated. This strain produced 30.1 μM of rhamnolipid equivalents (RE) of biosurfactants on 50 mg of pyrene per liter of medium. The production of biosurfactants was significantly correlated with the water solubility (S _w) of the substrate and the growth rate on it. When chrysene, with a S _w of 2.8 × 10⁻³ mg per liter of water, was the carbon source, 13.1 μM of RE of biosurfactants were produced compared to 10.3 μM of RE of biosurfactants on acenaphthene with a S _w of 1.9 mg per liter of water. No biosurfactants were produced on salicylic acid, catechol, and citrate. All of the strain 29L mutants which grew on pyrene produced biosurfactants while among the mutants which grew on naphthalene, only 88.4% produced biosurfactants. The rhamnolipid mixture, JBR425, inhibited the growth of Strain 29L wild type (WT) and all of its mutants on pyrene. However, these mutants were able to grow in the presence of pyrene when the growth medium was supplemented with 10⁻⁶ mg of emulsan per milliliter of medium. This study implies biosurfactants are produced by Strain 29L as a physiological response to the hydrophobicity of pyrene. The combined use of indigenous biosurfactants and the added biosurfactant, emulsan, is a biotechnology to enhance pyrene degradation by Pseudomonas fluorescens 29L.     

Antibiofilm Activity of Biosurfactant Producing Coral Associated Bacteria Isolated from Gulf of Mannar

Coral Associated Bacteria (CAB) (N = 22) isolated from the mucus of the coral Acropora digitifera were screened for biosurfactants using classical screening methods; hemolysis test, lipase production, oil displacement, drop collapse test and emulsifying activity. Six CAB (U7, U9, U10, U13, U14, and U16) were found to produce biosurfactants and were identified by 16S ribosomal RNA gene sequencing as Providencia rettgeri, Psychrobacter sp., Bacillus flexus, Bacillus anthracis, Psychrobacter sp., and Bacillus pumilus respectively. Their cell surface hydrophobicity was determined by Microbial adhesion to hydrocarbon assay and the biosurfactants produced were extracted and characterized by Fourier Transform Infrared spectroscopy. Since the biosurfactants are known for their surface modifying capabilities, antibiofilm activity of positive isolates was evaluated against biofilm forming Pseudomonas aeruginosa ATCC10145. Stability of the active principle exhibiting antibiofilm activity was tested through various temperature treatments ranging from 60 to 100 °C and Proteinase K treatment. CAB isolates U7 and U9 exhibited stable antibiofilm activity even after exposure to higher temperatures which is promising for the development of novel antifouling agents for diverse industrial applications. Further, this is the first report on biosurfactant production by a coral symbiont.

Electronic supplementary material

The online version of this article (doi:10.1007/s12088-014-0474-8) contains supplementary material, which is available to authorized users.     

Caffeinated soft drinks reduce bacterial prevalence in voice prosthetic biofilms

Laryngectomized patients use indwelling silicone rubber voice prostheses, placed in a surgically created fistula in between the trachea and the esophagus, for voice and speech rehabilitation. At the esophageal side, these voice prostheses rapidly become colonized by a thick biofilm consisting of a variety of oral and skin bacteria and yeasts, and on average, after 3–4 months a prosthesis has to be replaced. In this study, the influence of caffeinated soft drinks on biofilm formation on silicone rubber voice prostheses has been investigated in a modified Robbins device. Robbins devices were first inoculated with the total cultivable microflora from an explanted voice prosthesis for 3 d, after which the devices were perfused three times daily over a 12 day period with 650 ml of either phosphate buffered saline or carbonated mineral water (controls), caffeinated soft drinks (two types), or a decaffeinated and a sugar‐free version of one of the caffeinated soft drinks. At the end of a day, during the experimental period, the devices were filled with growth medium for 30 min. Both caffeinated soft drinks reduced bacterial prevalence in the biofilms to 1–5% of the control, while yeasts thrived in voice prosthetic biofilms exposed to caffeinated soft drinks. Neither the controls, nor the decaffeinated soft drink, nor the sugar‐free version of this showed these effects on bacterial prevalence.     

Extracellular fungal polyol lipids: A new class of potential high value lipids

Extracellular fungal glycolipid biosurfactants have attracted attention because productivities can be high, cheap substrates can be used, the molecules are secreted into the medium and the downstream processing is relatively simple. Three classes of extracellular fungal glycolipid biosurfactants have provided most of the scientific advances in this area, namely sophorolipids, mannosylerythritol lipids and cellobioselipids. Polyol lipids, a fourth class of extracellular fungal glycolipid biosurfactants, comprise two groups of molecules: liamocins produced by the yeast-like fungus Aureobasidium pullulans, and polyol esters of fatty acids, produced by some Rhodotorula yeast species. Both are amphiphilic, surface active molecules with potential for commercial development as surfactants for industrial and household applications. The current knowledge of polyol lipids highlights an emerging group of extracellular fungal glycolipid biosurfactants and provides a perspective of what next steps are needed to harness the benefits and applications of this novel group of molecules.     

Streptococcus thermophilus and its biosurfactants inhibit adhesion by Candida spp. on silicone rubber.

The adhesion of yeasts, two Candida albicans and two Candida tropicalis strains isolated from naturally colonized voice prostheses, to silicone rubber with and without a salivary conditioning film in the absence and presence of adhering Streptococcus thermophilus B, a biosurfactant-releasing dairy isolate, was studied. Coverage of 1 to 4% of the surface of silicone rubber substrata with adhering S. thermophilus B gave significant reductions in the initial yeast adhesion regardless of the presence of a conditioning film. Mechanistically, this interference in yeast adhesion by S. thermophilus B was not due to direct physical effects but to biosurfactant release by the adhering bacteria, because experiments with S. thermophilus B cells that had released their biosurfactants prior to adhesion to silicone rubber and competition with yeasts did not show interference with initial yeast adhesion. The amounts of biosurfactants released were highest for mid-exponential- and early-stationary-phase bacteria (37 mg.g of cells-1 [dry weight]), but biosurfactants released by stationary-phase bacteria (14 mg.g of cells-1 [dry weight]) were the most surface active. The crude biosurfactants released were mixtures of various components, with a glycolipid-like component being the most surface active. A lipid-enriched biosurfactant fraction reduced the surface tension of an aqueous solution to about 35 mJ.m-2 at a concentration of only 0.5 mg.ml-1. The amount of biosurfactant released per S. thermophilus B cell was estimated to be sufficient to cover approximately 12 times the area of the cross section of the bacterium, making biosurfactant release a powerful defense weapon in the postadhesion competition of the bacterium with microorganisms such as yeasts. Preadsorption of biosurfactants to the silicone rubber prior to allowing yeasts to adhere was as effective against C. albicans GB 1/2 adhesion as covering 1 to 2% of the silicone rubber surface with adhering S. thermophilus B, but a preadsorbed biosurfactant layer was less effective against C. tropicalis GB 9/9.     

The influence of antimicrobial peptides and mucolytics on the integrity of biofilms consisting of bacteria and yeasts as affecting voice prosthetic air flow resistances

The integrity of biofilms on voice prostheses used to rehabilitate speech in laryngectomized patients causes unwanted increases in airflow resistance, impeding speech. Biofilm integrity is ensured by extracellular polymeric substances (EPS). This study aimed to determine whether synthetic salivary peptides or mucolytics, including N-acetylcysteine and ascorbic acid, influence the integrity of voice prosthetic biofilms. Biofilms were grown on voice prostheses in an artificial throat model and exposed to synthetic salivary peptides, mucolytics and two different antiseptics (chlorhexidine and Triclosan). Synthetic salivary peptides did not reduce the air flow resistance of voice prostheses afterm biofilm formation. Although both chlorhexidine and Triclosan reduced microbial numbers on the prostheses, only the Triclosan-containing positive control reduced the air flow resistance. Unlike ascorbic acid, the mucolytic N-acetylcysteine removed most EPS from the biofilms and induced a decrease in air flow resistance.     

The Influence of Antimicrobial Peptides and Mucolytics on the Integrity of Biofilms Consisting of Bacteria and Yeasts as Affecting Voice Prosthetic Air Flow Resistances

The integrity of biofilms on voice prostheses used to rehabilitate speech in laryngectomized patients causes unwanted increases in airflow resistance, impeding speech. Biofilm integrity is ensured by extracellular polymeric substances (EPS). This study aimed to determine whether synthetic salivary peptides or mucolytics, including N-acetylcysteine and ascorbic acid, influence the integrity of voice prosthetic biofilms. Biofilms were grown on voice prostheses in an artificial throat model and exposed to synthetic salivary peptides, mucolytics and two different antiseptics (chlorhexidine and Triclosan). Synthetic salivary peptides did not reduce the air flow resistance of voice prostheses after biofilm formation. Although both chlorhexidine and Triclosan reduced microbial numbers on the prostheses, only the Triclosan-containing positive control reduced the air flow resistance. Unlike ascorbic acid, the mucolytic N-acetylcysteine removed most EPS from the biofilms and induced a decrease in air flow resistance.     

Characterization and properties of biosurfactants produced by a newly isolated strain <Emphasis Type="Italic">Bacillus methylotrophicus</Emphasis> DCS1 and their applications in enhancing solubility of hydrocarbon

Six biosurfactant-producing bacteria were isolated from hydrocarbon contaminated soils in Sfax, Tunisia. Isolates were screened for biosurfactant production by different conventional methods including hemolytic activity, surface tension reduction, drop-collapsing and oil displacement tests. All these screening tests show that all the isolates behave differently. Among the isolated bacteria, DCS1 strain was selected for further studies based on its highest activities and it was identified as Bacillus methylotrophicus DCS1. This strain was found to be a potent producer of biosurfactant when cultivated in mineral-salts medium supplemented with diesel oil (2 %, v/v) as a sole carbon source. Physicochemical properties and stability of biosurfactants synthesized by B. methylotrophicus DCS1 were investigated. The produced biosurfactants DCS1, from Landy medium, possess high surface activity that could lower the surface tension of water to a value of 31 from 72 mN m^?1 and have a critical micelle concentration (CMC) of 100 mg L^?1. Compared with SDS and Tween 80, biosurfactants showed excellent emulsification activities against different hydrocarbon substrates and high solubilization efficiency towards diesel oil. Biosurfactants DCS1 showed good stability in a wide range of temperature, pH and salinity. These results suggested that biosurfactants produced by B. methylotrophicus DCS1 could be an alternative to chemically synthesized surfactants for use in bioremediation processes to enhance the solubility of hydrophobic compounds.