Membrane interactions of designed cationic antimicrobial peptides: the two thresholds

Novel cationic antimicrobial peptides (CAPs) designed in our lab-typified by sequences such as KKKKKKAAX-AAXAAXAA-NH(2), where X = Phe/Trp-display high antibacterial activity but exhibit little or no hemolytic activity towards human red blood cells even at high doses. To clarify the mechanism of their selectivity for bacterial versus mammalian membranes and to increase our understanding of the relationships between primary sequence and bioactivity, a library of derivatives was prepared by increasing segmental hydrophobicity, in which systematic substitutions of Ala for two, three, or four Leu residues were made. Conformationally constrained dimeric and cyclic derivatives were also synthesized. The peptides were examined for activity against pathogenic bacteria (Pseudomonas aeruginosa), hemolytic activity on human red blood cells, and insertion into models of natural bacterial membranes (containing anionic lipids) and mammalian membranes (containing zwitterionic lipids + cholesterol). Results were compared with corresponding properties of the natural CAPs magainin and cecropin. Using circular dichroism and fluorescence spectroscopy, we found that peptide conformation and membrane insertion were sequence dependent, both upon the number of Leu residues, and upon their positions along the hydrophobic core. Membrane disruption was likely enhanced by the fact that the peptides contain potent dimerization-promoting sequence motifs, as assessed by SDS-PAGE gel analysis. The overall results led us to identify distinctions in the mechanism of actions of these CAPs for disruption of bacterial versus mammalian membranes, the latter dependent on surpassing a "second hydrophobicity threshold" for insertion into zwitterionic membranes.     

Molecular basis for membrane selectivity of NK-2, a potent peptide antibiotic derived from NK-lysin

Increasing resistance of pathogenic bacteria against antibiotics is a severe problem in health care. Natural antimicrobial peptides and derivatives thereof have emerged as promising candidates for “new antibiotics”. In contrast to classical antibiotics, these peptides act by direct physical destabilization of the target cell membrane. Nevertheless, they exhibit a high specificity for bacteria over mammalian cells. However, the precise mechanism of action and the molecular basis for membrane selectivity are still a matter of debate. We have designed a new peptide antibiotic (NK-2) with enhanced antimicrobial activity based on an effector protein of mammalian immune cells (NK-lysin). Here we describe the interaction of this α-helical synthetic peptide with membrane mimetic systems, designed to mimic the lipid compositions of mammalian and bacterial cytoplasmic membranes. Utilizing fluorescence and biosensor assays, we could show that on one hand, NK-2 strongly interacts with negatively charged membranes; on the other hand, NK-2 is able to discriminate, without the necessity of negative charges, between the zwitterionic phospholipids phosphatidylethanolamine (PE) and phosphatidylcholine (PC), the major constituents of the outer leaflet of the cytoplasmic membranes of bacteria and mammalian cells, respectively.     

Investigating the cationic side chains of the antimicrobial peptide tritrpticin: hydrogen bonding properties govern its membrane-disruptive activities

The positively charged side chains of cationic antimicrobial peptides are generally thought to provide the initial long-range electrostatic attractive forces that guide them towards the negatively charged bacterial membranes. Peptide analogs were designed to examine the role of the four Arg side chains in the cathelicidin peptide tritrpticin (VRRFPWWWPFLRR). The analogs include several noncoded Arg and Lys derivatives that offer small variations in side chain length and methylation state. The peptides were tested for bactericidal and hemolytic activities, and their membrane insertion and permeabilization properties were characterized by leakage assays and fluorescence spectroscopy. A net charge of +5 for most of the analogs maintains their high antimicrobial activity and directs them towards preferential insertion into model bacterial membrane systems with a similar extent of burial of the Trp side chains. However the peptides exhibit significant functional differences. Analogs with methylated cationic side chains cause lower levels of membrane leakage and are associated with lower hemolytic activities, making them potentially attractive pharmaceutical candidates. Analogs containing the Arg guanidinium groups cause more membrane disruption than those containing the Lys amino groups. Peptides in the latter group with shorter side chains have increased membrane activity and conversely, elongating the Arg residue causes slightly higher membrane activity. Altogether, the potential for strong hydrogen bonding between the four positive Arg side chains with the phospholipid head groups seems to be a determinant for the membrane disruptive properties of tritrpticin and many related cationic antimicrobial peptides.     

H1 helix of colicin U causes phospholipid membrane permeation

In light of an increasing number of antibiotic-resistant bacterial strains, it is essential to understand an action imposed by various antimicrobial agents on bacteria at the molecular level. One of the leading mechanisms of killing bacteria is related to the alteration of their plasmatic membrane. We study bio-inspired peptides originating from natural antimicrobial proteins colicins, which can disrupt membranes of bacterial cells. Namely, we focus on the α-helix H1 of colicin U, produced by bacterium Shigella boydii, and compare it with analogous peptides derived from two different colicins. To address the behavior of the peptides in biological membranes, we employ a combination of molecular simulations and experiments. We use molecular dynamics simulations to show that all three peptides are stable in model zwitterionic and negatively charged phospholipid membranes. At the molecular level, their embedment leads to the formation of membrane defects, membrane permeation for water, and, for negatively charged lipids, membrane poration. These effects are caused by the presence of polar moieties in the considered peptides. Importantly, simulations demonstrate that even monomeric H1 peptides can form toroidal pores. At the macroscopic level, we employ experimental co-sedimentation and fluorescence leakage assays. We show that the H1 peptide of colicin U incorporates into phospholipid vesicles and disrupts their membranes, causing leakage, in agreement with the molecular simulations. These insights obtained for model systems seem important for understanding the mechanisms of antimicrobial action of natural bacteriocins and for future exploration of small bio-inspired peptides able to disrupt bacterial membranes.     

Activity and selectivity of histidine-containing lytic peptides to antibiotic-resistant bacteria

Lytic peptides are a group of membrane-acting peptides that are active to antibiotic-resistant bacteria but demonstrate high toxicity to tissue cells. Here, we reported the construction of new lytic peptide derivatives through the replacement of corresponding lysine/arginine residues in lytic peptide templates with histidines. Resulting lytic peptides had the same lethality to antibiotic-resistant bacteria, including methicillin-resistant Staphylococcus aureus, but showed greatly improved selectivity to bacteria. When incubated with co-cultured bacteria and tissue cells, these histidine-containing lytic peptide derivatives killed bacteria selectively but spared co-cultured human cells. Membrane insertion and peptide-quenching studies revealed that histidine protonation controlled peptide interactions with cell membranes determined the bacterial selectivity of lytic peptide derivatives. Compared with parent peptides, lytic peptide derivatives bound to bacteria strongly and inserted deeply into the bacterial cell membrane. Therefore, histidine-containing lytic peptides represent a new group of antimicrobial peptides for bacterial infections in which the antibiotic resistance has developed.     

In vitro system for high-throughput screening of random peptide libraries for antimicrobial peptides that recognize bacterial membranes.

Antibacterial peptides have been isolated from a wide range of species. Some of these peptides act on microbial membranes, disrupting their barrier function. With the increasing development of antibiotic resistance by bacteria, these antibacterial peptides, which have a new mode of action, have attracted interest as antibacterial agents. To date, however, few effective high-throughput approaches have been developed for designing and screening peptides that act selectively on microbial membranes. In vitro display techniques are powerful tools to select biologically functional peptides from peptide libraries. Here, we used the ribosome display system to form peptide-ribosome-mRNA complexes in vitro from nucleotides encoding a peptide library, as well as immobilized model membranes, to select specific sequences that recognize bacterial membranes. This combination of ribosome display and immobilized model membranes was effective as an in vitro high-throughput screening system and enabled us to identify motif sequences (ALR, KVL) that selectively recognized the bacterial membrane. Owing to host toxicity, it was not possible to enrich any sequence expected to show antimicrobial activity using another in vitro system, e.g. phage display. The synthetic peptides designed from these enriched motifs acted selectively on the bacterial model membrane and showed antibacterial activity. Moreover, the motif sequence conferred selectivity onto native peptides lacking selectivity, and decreased mammalian cell toxicity of native peptides without decreasing their antibacterial activity.     

The importance of bacterial membrane composition in the structure and function of aurein 2.2 and selected variants

For cationic antimicrobial peptides to become useful therapeutic agents, it is important to understand their mechanism of action. To obtain high resolution data, this involves studying the structure and membrane interaction of these peptides in tractable model bacterial membranes rather than directly utilizing more complex bacterial surfaces. A number of lipid mixtures have been used as bacterial mimetics, including a range of lipid headgroups, and different ratios of neutral to negatively charged headgroups. Here we examine how the structure and membrane interaction of aurein 2.2 and some of its variants depend on the choice of lipids, and how these models correlate with activity data in intact bacteria (MICs, membrane depolarization). Specifically, we investigated the structure and membrane interaction of aurein 2.2 and aurein 2.3 in 1:1 cardiolipin/1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (CL/POPG) (mol/mol), as an alternative to 1:1 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine(POPC)/POPG and a potential model for Gram positive bacteria such as S. aureus. The structure and membrane interaction of aurein 2.2, aurein 2.3, and five variants of aurein 2.2 were also investigated in 1:1 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE)/POPG (mol/mol) lipids as a possible model for other Gram positive bacteria, such as Bacillus cereus. Solution circular dichroism (CD) results demonstrated that the aurein peptides adopted α-helical structure in all lipid membranes examined, but demonstrated a greater helical content in the presence of POPE/POPG membranes. Oriented CD and 31P NMR results showed that the aurein peptides had similar membrane insertion profiles and headgroup disordering effects on POPC/POPG and CL/POPG bilayers, but demonstrated reduced membrane insertion and decreased headgroup disordering on mixing with POPE/POPG bilayers at low peptide concentrations. Since the aurein peptides behaved very differently in POPE/POPG membrane, minimal inhibitory concentrations (MICs) of the aurein peptides in B. cereus strain C737 were determined. The MIC results indicated that all aurein peptides are significantly less active against B. cereus than against S. aureus and S. epidermidis. Overall, the data suggest that it is important to use a relevant model for bacterial membranes to gain insight into the mode of action of a given antimicrobial peptide in specific bacteria.     

Mixtures of a series of homologous hydrophobic peptides with lipid bilayers: a simple model system for examining the protein-lipid interface

The interactions of several members of a homologous series of peptides with the phospholipid bilayer have been examined by using fluorescence and deuterium NMR spectroscopy, differential scanning calorimetry, and measurements of water-to-bilayer partition coefficients. 1,2-Dimyristoyl-sn-glycero-3-phosphocholine (DMPC) bilayers and tripeptides of the form Ala-X-Ala-O-tert-butyl are used as a model system to probe the influence of amino acid side-chain substitution on the insertion of peptides into membranes and the behavior of peptide/bilayer mixtures. Tripeptides with X = Gly, Ala, Phe, and Trp have been examined. All of the tripeptides are water soluble, and all partition into DMPC bilayer vesicles to some extent. The Gly-containing peptide is the least soluble and the Trp-containing peptide the most soluble in the bilayer. The extent of perturbation of the bilayer structure induced by the peptides parallels their bilayer solubility: the Gly and Ala peptides act as simple impurities while peptides containing bulky aromatic rings cause a phase separation. Changes in the fluorescence properties of the Trp analogue upon incorporation into the bilayer indicate that the Trp side chain is probably immersed in the hydrocarbon region of the bilayer. Peptides of this form should serve as easily modifiable model systems with which to examine details of how the bilayer environment affects peptide conformation, as well as how hydrophobic peptides affect the bilayer structure.     

Cathelicidin-derived Trp/Pro-rich antimicrobial peptides with lysine peptoid residue (Nlys): therapeutic index and plausible mode of action.

Recently, we designed a novel cell-selective antimicrobial peptide (TPk) with intracellular mode of action from Pro --> Nlys (Lys peptoid residue) substitution in a noncell-selective cathelicidin-derived Trp/Pro-rich antimicrobial peptide, tritrpticin-amide (TP; VRRFPWWWPFLRR-NH(2)) (Biochemistry 2006; 45: 13007-13017). In this study, to elucidate the effect of Pro --> Nlys substitution on therapeutic index and mode of action of other noncell-selective cathelicidin-derived Trp/Pro-rich antimicrobial peptides and develop novel short antimicrobial peptides with high cell selectivity/therapeutic index, we synthesized Nlys-substituted antimicrobial peptides, TPk, STPk and INk, in which all proline residues of TP, symmetric TP-analogue (STP; KKFPWWWPFKK-NH(2)) and indolicidin (IN; ILPWKWPWWPWRR-NH(2)) were replaced by Nlys, respectively. Compared to parent Pro-containing peptides (TP, STP and IN), Nlys substituted peptides (TPk, STPk and Ink) had 4- to 26-fold higher cell selectivity/therapeutic index. Parent Pro-containing peptides induced a significant depolarization of the cytoplasmic membrane of intact Staphylococcus aureus at their MIC, whereas Nlys-substituted antimicrobial peptides did not cause visible membrane depolarization at their MIC. These results suggest that the antibacterial action of Nlys-substituted peptides is probably not due to the disruption of bacterial cytoplasmic membranes but the inhibition of intracellular components. Taken together, our results showed that Pro --> Nlys substitution in other noncell-selective Trp/Pro-rich antimicrobial peptides such as STP and IN as well as TP can improve the cell selectivity/therapeutic index and change the mode of antibacterial action from membrane-disrupting to intracellular targeting. In conclusion, our findings suggested that Pro --> Nlys substitution in noncell-selective Trp/Pro-rich antimicrobial peptides is a promising method to develop cell-selective antimicrobial peptides with intracellular target mechanism.     

Coupling Molecular Dynamics Simulations with Experiments for the Rational Design of Indolicidin-Analogous Antimicrobial Peptides

Antimicrobial peptides (AMPs) have attracted much interest in recent years because of their potential use as new-generation antibiotics. Indolicidin (IL) is a 13-residue cationic AMP that is effective against a broad spectrum of bacteria, fungi, and even viruses. Unfortunately, its high hemolytic activity retards its clinical applications. In this study, we adopted molecular dynamics (MD) simulations as an aid toward the rational design of IL analogues exhibiting high antimicrobial activity but low hemolysis. We employed long-timescale, multi-trajectory all-atom MD simulations to investigate the interactions of the peptide IL with model membranes. The lipid bilayer formed by the zwitterionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) was chosen as the model erythrocyte membrane; lipid bilayers formed from a mixture of POPC and the negatively charged 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol were chosen to model bacterial membranes. MD simulations with a total simulation time of up to 4 μs revealed the mechanisms of the processes of IL adsorption onto and insertion into the membranes. The packing order of these lipid bilayers presumably correlated to the membrane stability upon IL adsorption and insertion. We used the degree of local membrane thinning and the reduction in the order parameter of the acyl chains of the lipids to characterize the membrane stability. The order of the mixed 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol/POPC lipid bilayer reduced significantly upon the adsorption of IL. On the other hand, although the order of the pure-POPC lipid bilayer was perturbed slightly during the adsorption stage, the value was reduced more dramatically upon the insertion of IL into the membrane's hydrophobic region. The results imply that enhancing IL adsorption on the microbial membrane may amplify its antimicrobial activity, while the degree of hemolysis may be reduced through inhibition of IL insertion into the hydrophobic region of the erythrocyte membrane. In addition, through simulations, we identified the amino acids that are most responsible for the adsorption onto or insertion into the two model membranes. Positive charges are critical to the peptide's adsorption, whereas the presence of hydrophobic Trp8 and Trp9 leads to its deeper insertion. Combining the hypothetical relationships between the membrane disordering and the antimicrobial and hemolytical activities with the simulated results, we designed three new IL-analogous peptides: IL-K7 (Pro7 → Lys), IL-F89 (Trp8 and Trp9 → Phe), and IL-K7F89 (Pro7 → Lys; Trp8 and Trp9 → Phe). The hemolytic activity of IL-F89 is considerably lower than that of IL, whereas the antimicrobial activity of IL-K7 is greatly enhanced. In particular, the de novo peptide IL-K7F89 exhibits higher antimicrobial activity against Escherichia coli; its hemolytic activity decreased to only 10% of that of IL. Our simulated and experimental results correlated well. This approach—coupling MD simulations with experimental design—is a useful strategy toward the rational design of AMPs for potential therapeutic use.     

Tryptophan-rich antimicrobial peptides: comparative properties and membrane interactions.

The interaction of several tryptophan (Trp)-rich cationic antimicrobial peptides with membranes was investigated. These peptides included tritrpticin, indolicidin, lactoferricin B (Lfcin B), and a shorter fragment of lactoferricin (LfcinB4-9). The average environment of the Trp residues of these peptides was assessed from their fluorescence properties, both the wavelength of maximal emission as well as the red edge effect. The insertion of the peptides into vesicles of differing composition was examined using quenching of the Trp fluorescence, with both soluble acrylamide and nitroxide-labelled phospholipids as well as by chemical modification of the Trp residues with N-bromosuccinimide. The results were consistent with the Trp side chains positioned mostly near the membrane-water interface. The extent of burial of the Trp side chains appears to be greater in vesicles containing phospholipids with the anionic phosphatidylglycerol headgroup. Leakage of the aqueous contents of liposomes was also measured using the 8-aminonaphthalene-1,3,6-trisulfonic acid--p-xylene-bis-pyridinium bromide assay. Tritrpticin, which demonstrated the greatest red edge shift, also displayed the largest amount of leakage from liposomes. Taken together, the results illustrate that cationic Trp-rich antimicrobial peptides preferentially disrupt large unilamellar vesicles with a net negative charge following their insertion into the interfacial region of the phospholipid bilayer.     

Design and characterization of short antimicrobial peptides using leucine zipper templates with selectivity towards microorganisms

Design of antimicrobial peptides with selective activity towards microorganisms is an important step towards the development of new antimicrobial agents. Leucine zipper sequence has been implicated in cytotoxic activity of naturally occurring antimicrobial peptides; moreover, this motif has been utilized for the design of novel antimicrobial peptides with modulated cytotoxicity. To understand further the impact of substitution of amino acids at ‘a’ and/or ‘d’ position of a leucine zipper sequence of an antimicrobial peptides on its antimicrobial and cytotoxic properties four short peptides (14-residue) were designed on the basis of a leucine zipper sequence without or with replacement of leucine residues in its ‘a’ and ‘d’ positions with d-leucine or alanine or proline residue. The original short leucine zipper peptide (SLZP) and its d-leucine substituted analog, DLSA showed comparable activity against the tested Gram-positive and negative bacteria and the fungal strains. The alanine substituted analog (ASA) though showed appreciable activity against the tested bacteria, it showed to some extent lower activity against the tested fungi. However, the proline substituted analog (PSA) showed lower activity against the tested bacterial or fungal strains. Interestingly, DLSA, ASA and PSA showed significantly lower cytotoxicity than SLZP against both human red blood cells (hRBCs) and murine 3T3 cells. Cytotoxic and bactericidal properties of these peptides matched with peptide-induced damage/permeabilization of mammalian cells and bacteria or their mimetic lipid vesicles suggesting cell membrane could be the target of these peptides. As evidenced by tryptophan fluorescence and acrylamide quenching studies the peptides showed similarities either in interaction or in their localization within the bacterial membrane mimetic negatively charged lipid vesicles. Only SLZP showed localization inside the mammalian membrane mimetic zwitterionic lipid vesicles. The results show significant scope for designing antimicrobial agents with selectivity towards microorganisms by substituting leucine residues at ‘a’ and/or ‘d’ positions of a leucine zipper sequence of an antimicrobial peptide with different amino acids.     

Combinatorial libraries: a tool to design antimicrobial and antifungal peptide analogues having lytic specificities for structure-activity relationship studies

In the race for supremacy, microbes are sprinting ahead. This warning by the World Health Organization clearly demonstrates that the spread of antibiotic-resistant bacteria leads to a global health problem and that antibiotics never seen before by bacteria are urgently needed. Antimicrobial peptides represent such a source for novel antibiotics due to their rapid lytic activity (within minutes) through disruption of cell membranes. However, due to the similarities between bacterial, fungal, and mammalian plasma cell membranes, a large number of antimicrobial peptides have low lytic specificities and exhibit a broad activity spectrum and/or significant toxic effect toward mammalian cells. Mutation strategies have allowed the development of analogues of existing antimicrobial peptides having greater lytic specificities, although such methods are lengthy and would be more efficient if the molecular mechanisms of action of antimicrobial peptides were clearly elucidated. Synthetic combinatorial library approaches have brought a new dimension to the design of novel biologically active compounds. Thus, a set of peptide analogues were generated based on the screening of a library built around an existing lytic peptide, and on a deconvolution strategy directed toward activity specificity. These peptide analogues also served as model systems to further study the effect of biomembrane mimetic systems on the peptides structural behavior relevant to their biological activities.     

From "carpet" mechanism to de-novo designed diastereomeric cell-selective antimicrobial peptides

Living organisms of all types produce a large repertoire of gene-encoded, net positively charged, antimicrobial peptides as part of their innate immunity to microbial invasion. Despite significant variations in composition, length and secondary structure most antimicrobial peptides are active in micromolar concentrations, suggesting a common general mechanism for their mode of action. Many antimicrobial peptides bind bacterial phospholipid membranes up to a threshold concentration, followed by membrane permeation/disintegration (the "carpet" mechanism). Recent data suggest that the details of the permeation pathways may vary for different peptides and are assigned to different modes of action. Accumulating data reveal that the molecular basis for cell selectivity is the ability of peptides to specifically bind the negatively charged bacterial membrane, as well as their oligomeric state in solution and in the membrane. Based on the "carpet" mechanism and the role of the peptide oligomeric state, a novel group of diastereomeric (containing D- and L-amino acids) antimicrobial peptides were developed. These peptides may serve as promising templates for the future designs of antimicrobial peptides.     

Solution structure of a novel tryptophan-rich peptide with bidirectional antimicrobial activity

Trp-rich antimicrobial peptides play important roles in the host innate defense mechanisms of many plants, insects, and mammals. A new type of Trp-rich peptide, Ac-KWRRWVRWI-NH(2), designated Pac-525, was found to possess improved activity against both gram-positive and -negative bacteria. We have determined that the solution structures of Pac-525 bound to membrane-mimetic sodium dodecyl sulfate (SDS) micelles. The SDS micelle-bound structure of Pac-525 adopts an alpha-helical segment at residues Trp2, Arg3, and Arg4. The positively charged residues are clustered together to form a hydrophilic patch. The three hydrophobic residues Trp2, Val6, and Ile9 form a hydrophobic core. The surface electrostatic potential map indicates the three tryptophan indole rings are packed against the peptide backbone and form an amphipathic structure. Moreover, the reverse sequence of Pac-525, Ac-IWRVWRRWK-NH(2), designated Pac-525(rev), also demonstrates similar antimicrobial activity and structure in membrane-mimetic micelles and vesicles. A variety of biophysical and biochemical methods, including circular dichroism, fluorescence spectroscopy, and microcalorimetry, were used to show that Pac-525 interacted strongly with negatively charged phospholipid vesicles and induced efficient dye release from these vesicles, suggesting that the antimicrobial activity of Pac-525 may be due to interactions with bacterial membranes.     

A novel linear amphipathic beta-sheet cationic antimicrobial peptide with enhanced selectivity for bacterial lipids

All known naturally occurring linear cationic peptides adopt an amphipathic alpha-helical conformation upon binding to lipids as an initial step in the induction of cell leakage. We designed an 18-residue peptide, (KIGAKI)3-NH2, that has no amphipathic character as an alpha-helix but can form a highly amphipathic beta-sheet. When bound to lipids, (KIGAKI)3-NH2 did indeed form a beta-sheet structure as evidenced by Fourier transform infrared and circular dichroism spectroscopy. The antimicrobial activity of this peptide was compared with that of (KIAGKIA)3-NH2, and it was better than that of GMASKAGAIAGKIAKVALKAL-NH2 (PGLa) and (KLAGLAK)3-NH2, all of which form amphipathic alpha-helices when bound to membranes. (KIGAKI)3-NH2 was much less effective at inducing leakage in lipid vesicles composed of mixtures of the acidic lipid, phosphatidylglycerol, and the neutral lipid, phosphatidylcholine, as compared with the other peptides. However, when phosphatidylethanolamine replaced phosphatidylcholine, the lytic potency of PGLa and the alpha-helical model peptides was reduced, whereas that of (KIGAKI)3-NH2 was improved. Fluorescence experiments using analogs containing a single tryptophan residue showed significant differences between (KIGAKI)3-NH2 and the alpha-helical peptides in their interactions with lipid vesicles. Because the data suggest enhanced selectivity between bacterial and mammalian lipids, linear amphipathic beta-sheet peptides such as (KIGAKI)3-NH2 warrant further investigation as potential antimicrobial agents.     

Synergistic Effects of the Membrane Actions of Cecropin-Melittin Antimicrobial Hybrid Peptide BP100

BP100 (KKLFKKILKYL-NH₂) is a short cecropin A-melittin hybrid peptide, obtained through a combinatorial chemistry approach, which is highly effective in inhibiting both the in vitro and in vivo growth of economically important plant pathogenic Gram-negatives. The intrinsic Tyr fluorescence of BP100 was taken advantage of to study the peptide's binding affinity and damaging effect on phospholipid bilayers modeling the bacterial and mammalian cytoplasmic membranes. In vitro cytotoxic effects of this peptide were also studied on mammalian fibroblast cells. Results show a stronger selectivity of BP100 toward anionic bacterial membrane models as indicated by the high obtained partition constants, one order of magnitude greater than for the neutral mammalian membrane models. For the anionic systems, membrane saturation was observed at high peptide/lipid ratios and found to be related with BP100-induced vesicle permeabilization, membrane electroneutrality, and vesicle aggregation. Occurrence of BP100 translocation was unequivocally detected at both high and low peptide/lipid ratios using a novel and extremely simple method. Moreover, cytotoxicity against mammalian models was reached at a concentration considerably higher than the minimum inhibitory concentration. Our findings unravel the relationships among the closely coupled processes of charge neutralization, permeabilization, and translocation in the mechanism of action of antimicrobial peptides.     

Effects of Hydrophobic Amino Acid Substitutions on Antimicrobial Peptide Behavior

Antimicrobial peptides (AMPs) are naturally occurring components of the immune system that act against bacteria in a variety of organisms throughout the evolutionary hierarchy. There have been many studies focused on the activity of AMPs using biophysical and microbiological techniques; however, a clear and predictive mechanism toward determining if a peptide will exhibit antimicrobial activity is still elusive, in addition to the fact that the mechanism of action of AMPs has been shown to vary between peptides, targets, and experimental conditions. Nonetheless, the majority of AMPs contain hydrophobic amino acids to facilitate partitioning into bacterial membranes and a net cationic charge to promote selective binding to the anionic surfaces of bacteria over the zwitterionic host cell surfaces. This study explores the role of hydrophobic amino acids using the peptide C18G as a model system. These changes were evaluated for the effects on antimicrobial activity, peptide-lipid interactions using Trp fluorescence spectroscopy, peptide secondary structure formation, and bacterial membrane permeabilization. The results show that while secondary structure formation was not significantly impacted by the substitutions, antibacterial activity and binding to model lipid membranes were well correlated. The variants containing Leu or Phe as the sole hydrophobic groups bound bilayers with highest affinity and were most effective at inhibiting bacterial growth. Peptides with Ile exhibited intermediate behavior while those with Val or α-aminoisobutyric acid (Aib) showed poor binding and activity. The Leu, Phe, and Ile peptides demonstrated a clear preference for anionic bilayers, exhibiting significant emission spectrum shifts upon binding. Similarly, the Leu, Phe, and Ile peptides demonstrated greater ability to disrupt lipid vesicles and bacterial membranes. In total, the data indicate that hydrophobic moieties in the AMP sequence play a significant role in the binding and ability of the peptide to exhibit antibacterial activity.     

Interaction of LL-37 with model membrane systems of different complexity: influence of the lipid matrix

As the main difference between bacterial and mammalian cell membranes is their net charge, the focal point of consideration in many model membrane experiments with antimicrobial peptides is lipid headgroup charge. We studied the interaction of the human multifunctional peptide LL-37 with single phospholipid monolayers, bilayers, and bilayers composed of binary mixtures of the four phospholipid species predominantly used in model membrane experiments (phosphatidylcholine, phosphatidylethanolamine, phosphatidylglycerol, and phosphatidylserine). We found that 1), the effects on single lipid monolayers are not comparable to those on the corresponding bilayers; 2), there are four different effects of LL-37 on bilayers of the four lipids; 3), the preference of LL-37 for the specific lipids is roughly inversely related to chain packing density; and 4), in the binary lipid mixtures, one lipid—and not necessarily the charged one—generally governs the mode of lipid/peptide interaction. Thus, our results show that lipid net charge is not the decisive factor determining the membrane-perturbing mechanism of LL-37, but only one of several parameters, among them packing density, the ability to form intermolecular H-bonds, and lipid molecular shape, which emphasizes how profoundly the choice of the model system can influence the outcome of a study of lipid/peptide interaction.     

The effects of shortening lactoferrin derived peptides against tumour cells, bacteria and normal human cells.

A number of shortened derivatives of the lactoferrin model peptide L12, PAWRKAFRWAKRMLKKAA, were designed in order to elucidate the structural basis for antitumour activity of lactoferrin derivatives. Three tumour cell lines were included in the study and toxicity determined by measuring lysis of human red blood cells and fibroblasts. The results demonstrated a strong correlation between antitumour activity and net positive charge, in which a net charge close to +7 was essential for a high antitumour activity. In order to increase the antitumour activity of the shortest peptide with a net charge less than +7, the hydrophobicity had to be increased by adding a bulky Trp residue. None of the peptides were haemolytic, but toxicity against fibroblasts was observed. However, modifications of the peptides had a higher effect on reducing fibroblast toxicity than antitumour activity and thereby resulted in peptides displaying an almost 7-fold selectivity for tumour cells compared with fibroblasts. The antimicrobial activity against the Gram-negative bacteria Escherichia coil and the Gram-positive bacteria Staphylococcus aureus was also included in order to compare the structural requirements for antitumour activity with those required for a high antimicrobial activity. The results showed that most of the peptides were highly active against both bacterial strains. Less modification by shortening the peptide sequences was tolerated for maintaining a high antitumour activity and selectivity compared with antimicrobial activity. The order of the amino acid residues and thereby the conformation of the peptides was highly essential for antitumour activity, whereas the antimicrobial activity was hardly influenced by changes in this parameter. Thus, in addition to a certain net positive charge and hydrophobicity, the ability to adopt an amphipathic conformation was a more critical structural parameter for antitumour activity than for antimicrobial activity, and implied that a higher flexibility or number of active conformations was tolerated for the peptides to exert a high antimicrobial activity.