通过PCR进行长片段DNA的合成

利用PCR合成DNA长片段(Synthesis Large Frament DNA using PCR,SLFD PCR)是一种有效的合成长片段DNA的方法。采用一段已知的500～600bp碱基的DNA片段为PCR模板,根据所要合成的DNA序列可以设计一系列的PCR引物,这些引物都位于模板DNA的5’端,长度为50～60bp,且从5’到3’方向顺序重叠,重叠碱基数目为12～15,全部引物叠加所得到的DNA正是自己所要合成的DNA。这组引物中最3’端的一条含有一个BamH Ⅰ酶切位点,在该位点后面有15碱基与模板DNA5’端一致的序列。另外还设计一条与该模板匹配的下游引物,引物内也含有一个BamH Ⅰ酶切位点。首先采用5’端最右侧的引物与下游引物进行PCR,在PCR进行10个循环后,以此次PCR的产物为下一轮PCR的模板,该轮PCR采用右侧倒数第二个引物为上游引物,下游引物保持不变。采用类似的方法,完成所有的PCR循环,就可以得到所需要合成的DNA长片段。该方法尤其适合100～200碱基左右的长片段DNA的快速合成与克隆。     

Truncated amplification: a method for high-fidelity template-driven nucleic acid amplification

The error rate of conventional PCR is problematic when amplifying from single cells or amplifying segments for protein functional analysis by in vitro translation. We describe truncated amplification, a method for high-fidelity amplification in which DNA polymerase errors are not propagated efficiently and original DNA templates exert greater influence on the amplification process. Truncated amplification utilizes pairs of oligonucleotides and thermal cycling, but it differs from PCR. Truncated amplification amplifies non-exponentially with one or two chimeric oligonucleotides and produces truncated terminal products that are no more than three rounds of replication from the original template. Exon 6 of the p53 gene was utilized as a model system to demonstrate proof of principle. Chimeric oligonucleotides containing three 3'-->5' reversed-deoxynucleotides or 2'-OMe-ribonucleotides at 6-8 nucleotides from the 3 'terminus retained sequence specificity and primer extension activity. With PfuTurbo but not with Taq or Vent (exo-) DNA polymerases, the modified nucleotides completely truncated the DNA polymerase elongation. The resulting truncated terminal products are not templates for further amplification because of the short length of the 3' complementary region. Truncated amplific ation can amplify quadratically or geometrically depending on whether two or one chimeric oligonucleotides are used. Truncated amplification is a promising approach when template-driven amplification is desired to increase thefrequency of error-free products.     

Uracil DNA glycosylase-mediated cloning of polymerase chain reaction-amplified DNA: application to genomic and cDNA cloning.

A simple and rapid method for cloning of amplification products directly from the polymerase chain reaction (PCR) has been developed. The method is based on the addition of a 12-base dUMP-containing sequence (CUACUACUACUA) to the 5' end of PCR primers. Incorporation of these primers during PCR results in the selective placement of dUMP residues into the 5' end of amplification products. Selective degradation of the dUMP residues in the PCR products with uracil DNA glycosylase (UDG) disrupts base pairing at the termini and generates 3' overhangs. Annealing of 3' protruding termini to vector DNA containing complementary 3' ends results in chimeric molecules which can be transformed, with high efficiency, without in vitro ligation. Directional cloning of PCR products has also been accomplished by incorporating different dU-containing sequences at the end of each PCR primer. Substitution of all dT residues in PCR primers with dU eliminates cloning of aberrant "primer dimer" products and enriches cloning of genuine PCR products. The method has been applied to cloning of inter-Alu DNA sequences from human placental DNA. Using a single primer, DNA sequences between appropriately oriented Alu sequences were amplified and cloned. Cloning of cDNA for the glyceraldehyde-3'-phosphate dehydrogenase gene from rat brain RNA was also demonstrated. The 3' end region of this gene was amplified by the 3' RACE method and the amplified DNA was cloned after UDG digestion. Characterization of cloned DNAs by sequence analysis showed accurate repair of the cloning junctions. The ligase-free cloning method with UDG should prove to be a widely applicable procedure for rapid cloning of PCR-amplified DNA.     

Restriction cutting independent method for cloning genomic DNA segments outside the boundaries of known sequences

We present a simple method for cloning genomic DNA segments outside the boundaries of known sequences, which is not dependent on restriction cutting or mapping. In the first step of the method, a library of single-stranded flanking sequences is generated by linear amplification with one primer in the known region. A homooligomeric cytosine tail is added to each of the single-stranded fragments by a terminal transferase catalyzed reaction. The tailed fragments are then amplified by PCR with a nested primer in the known region and a poly-guanine primer complementary to the cytosine tail in the unknown region. Finally, the different fragments are separated by cloning and characterized by sequencing. The method was used to clone both the upstream (5') and the downstream (3') genomic regions of an intron-interrupted tRNA(Leu)(UAA) gene from three cyanobacteria belonging to the genus Microcystis.     

A PCR-based test for the presence of endogenous virus gene evA in chickens

An endogenous virus, denoted ev A, is present at high frequency in all brown egg layer lines. Using inverse polymerase chain reaction (PCR) based on the viral LTR regions, products were obtained containing cellular sequences 5' and 3' to the viral insertion point. PCR of chicken genomic DNA was carried out, using primers chosen from the 5' and 3' cellular sequences and a primer chosen from either the U3 or U5 portions of the viral LTR. Amplification of DNA from birds that did not carry ev A with the primer triplets always gave a single 364bp reaction product, interpreted as representing the flank-to-flank amplification product. Amplification of DNA from known homozygous or heterozygous ev A carriers, with the same primer triplets, always gave both the expected junction product and 364bp product. Therefore, these primer sequences can be used to distinguish ev A carriers from non-carriers but cannot distinguish between homozygous and heterozygous ev A carriers.     

Tallimustine lesions in cellular DNA are AT sequence-specific but not region-specific.

Tallimustine (FCE 24517) is an AT-specific alkylating antitumor derivative of distamycin. This study examined levels of tallimustine lesions in intracellular DNA, their sequence- and region-specificity, and the long-range distribution of the drug binding motif. Tallimustine adducts in DNA converted to strand breaks by heating allowed the quantitation of drug lesions. In bulk DNA of intact human leukemia CEM cells, tallimustine formed 0.15 +/- 0.04 and 0.64 +/- 0.18 lesions/kbp at 5 and 50 microM, respectively. These lesions represent monoadducts as no interstrand cross-links or DNA-protein cross-links were detected. Tallimustine adducts in intracellularly treated DNA showed a general preference for sequences with T-tracts, suggesting a propensity for intrinsically bent motifs. Major drug-adducted sites identified by repetitive primer extension, included 5'-TTTTGPu-3' and 5'-TTTTGC-3' motif. Despite the high specificity at the nucleotide level, tallimustine did not differentiate among bulk DNA and three discrete AT-rich regions of genomic DNA examined by quantitative PCR stop assay with lesion frequencies ranging from 0.23 to 0.39 lesions/kbp at 25 microM drug. In comparisons of lesion frequencies and cytotoxicity, tallimustine adducts are approximately 50 times more lethal than relatively nonsequence specific cisplatin adducts but are >100 times less lethal than lesions by an unrelated AT-specific drug, bizelesin. However, the 5'-TTTTGPu-3' motifs targeted by tallimustine are relatively infrequent and scattered throughout the genome. In contrast, the motifs 5'-T(A/T)(4)A-3' motifs targeted by bizelesin, while also infrequent, cluster in defined AT-rich islands. The lack of region-specificity may be the reason tallimustine adducts, despite high AT-specificity at the nucleotide level, are less lethal than region-specific bizelesin adducts.     

Rapid amplification of 5' complementary DNA ends (5' RACE)

This method is used to extend partial cDNA clones by amplifying the 5' sequences of the corresponding mRNAs 1-3. The technique requires knowledge of only a small region of sequence within the partial cDNA clone. During PCR, the thermostable DNA polymerase is directed to the appropriate target RNA by a single primer derived from the region of known sequence; the second primer required for PCR is complementary to a general feature of the target-in the case of 5' RACE, to a homopolymeric tail added (via terminal transferase) to the 3' termini of cDNAs transcribed from a preparation of mRNA. This synthetic tail provides a primer-binding site upstream of the unknown 5' sequence of the target mRNA. The products of the amplification reaction are cloned into a plasmid vector for sequencing and subsequent manipulation.     

A rapid, quantitative, non-radioactive bisulfite-SNuPE- IP RP HPLC assay for methylation analysis at specific CpG sites

The precise mapping and quantification of DNA methylation as an epigenetic parameter during development and in diseased tissues is of great importance for functional genomics. Here we describe a rapid, quantitative method to assess methylation levels at specific CpG sites using PCR products of bisulfite-treated genomic DNA. Using single nucleotide primer extension (SNuPE) assays in combination with ion pair reverse phase high performance liquid chromatography (IP RP HPLC) separation techniques, methylated and unmethylated CpGs can be discriminated and quantified based on the different masses and hydrophobicities of the extended primer products. The assay is linear, highly reproducible and several sites can be measured simultaneously in one reaction. It can be semi-automated and eliminates the need for cloning and sequencing of individual bisulfite PCR products.     

Non-cross-linking gold nanoparticle aggregation as a detection method for single-base substitutions

Aggregation of DNA-modified gold nanoparticles in a non-cross-linking configuration has extraordinary selectivity against terminal mismatch of the surface-bound duplex. In this paper, we demonstrate the utility of this selectivity for detection of single-base substitutions. The samples were prepared through standard protocols: DNA extraction, PCR amplification and single-base primer extension. Oligonucleotide-modified nanoparticles correctly responded to the unpurified products from the primer extension: aggregation for the full match and dispersion for all the mismatches. Applicability of this method to genomic DNA was tested with five human tumor cell lines, and verified by conventional technologies: mass spectrometry and direct sequencing. Unlike the existing methods for single-base substitution analysis, this method does not need specialized equipments, and opens up a new possibility of point-of-care diagnosis for single-nucleotide polymorphisms.     

Rapid amplification of genomic ends (RAGE) as a simple method to clone flanking genomic DNA

This report describes the amplification of upstream genomic sequences using the polymerase chain reaction (PCR) based solely on downstream DNA information from a cDNA clone. In this novel and rapid technique, genomic DNA (gDNA) is first incubated with a restriction enzyme that recognizes a site within the 5′ end of a gene, followed by denaturation and polyadenylation of its free 3′ ends with terminal transferase. The modified gDNA is then used as template for PCR using a gene-specific primer complementary to a sequence in the 3′ end of its cDNA and an anchored deoxyoligothymidine primer. A second round of PCR is then performed with a second, nested gene-specific primer and the anchor sequence primer. The resulting PCR product is cloned and its sequence determined. Three independent plant genomic clones were isolated using this method that exhibited complete sequence identity to their cDNAs and to the primers used in the amplification.     

Factors affecting fidelity of DNA synthesis during PCR amplification of d(C-A)n.d(G-T)n microsatellite repeats.

The susceptibility of microsatellite DNA sequences to insertions and deletions in vivo makes them useful for genetic mapping and for detecting genomic instability in tumors. An in vitro manifestation of this instability is the production of undesirable frameshift products during amplification of (dC-dA)n x (dG-dT)n microsatellites in the polymerase chain reaction (PCR). These products differ from the primary product by multiples of 2 nucleotides. We have tested the hypothesis that factors known to affect the fidelity of DNA synthesis may affect (dC-dA)n x (dG-dT)n frameshifting during the PCR. Neither modifications of pH, dNTP concentration, and Mg++ concentration using Amplitaq, nor the use of thermophilic DNA polymerases including UITma, Pfu, Vent and Deep Vent significantly decreased the production of frameshift products during amplification. However, 3'-->5' exonuclease activity in thermophilic DNA polymerases inhibited the accumulation of PCR products containing non-templated 3' terminal nucleotides. Most interestingly, extension temperatures of 37 degrees C during amplification using the thermolabile DNA polymerases Sequenase 1.0, Sequenase 2.0, and 3'-->5' exonuclease-deficient Klenow fragment greatly decreased the production of frameshift products. This method can improve the resolution of heterozygous or mutant (dC-dA)n x (dG-dT)n alleles differing in size by one or two repeat units.     

Isolation of single-stranded DNA from loop-mediated isothermal amplification products.

Loop-mediated isothermal amplification (LAMP), in which a specific DNA sequence can be directly amplified under isothermal conditions, yields DNA in large quantities of more than 500 microg/ml. We have developed a method to isolate single-stranded DNA fragments from LAMP products that are stem-loop DNAs with several inverted repeats of the target DNA. This method requires the TspRI restriction enzyme, a primer hybridized to the 3' overhanging sequence at its cleavage site, and a DNA polymerase with strand displacement activity. The LAMP products are digested with TspRI and are then extended using the primer, producing the strand-specific DNA fragments. All processes, from LAMP reaction to primer extension, can be carried out at the same temperature. The use of strand-specific DNA would be conducive for detection by hybridization technique such as DNA microarrays.     

Mapping transposon insertion sites by touchdown PCR and hybrid degenerate primers

A novel mapping method based on touchdown PCR was developed for identifying a transposon insertion site in genomic DNA using a hybrid consensus-degenerate primer in combination with a specific primer that anneals to the transposon. The method was tested using Xanthomonas citri transposon mutants. PCR products contained adjacent DNA regions that belonged to both X. citri genomic DNA and the transposon. Products were directly sequenced from PCRs using only the specific primer. Different PCR conditions were tested, and the optimized reaction parameters that increased product yields and specificity are described. Best results were obtained with the HIB17 hybrid primer, which is a 25-mer oligonucleotide having degenerate bases at 6 different positions within the last 12 bases at the 3' end. An X. citri mutants library was produced by random transposition using the EZ::TN transposon, and we identified the insertion sites within the genome of 90 mutants. Insertions were found within both the chromosomal and the plasmid DNA in these X. citri mutants. Restriction mapping and Southern blot analysis confirmed the insertion sites for eight randomly chosen mutants. This method is a very useful tool for large-scale characterization of mutants in functional genomics studies.     

Rapid amplification of genomic DNA ends bynla III partial digestion and polynucleotide tailing

We report a simple and efficient method, which combines restriction endonuclease digestion and deoxynucleotide tailing, for cloning unknown genomic sequences adjacent to a known sequence. Total genomic DNA is partially digested with the frequent-cutting restriction enzymeNla III. A homo-oligomeric cytosine tail is added by terminal transferase. The tailed DNA fragments are used as the template for cloning flanking regions from all sequences of interest. A first round PCR amplification is performed with a gene-specific primer and the selective (modified polyguanine) anchor primer complementary to the cytosine tail and theNla III recognition site, with a universal amplification primer sequence at its 5′ end. This is followed by another PCR amplification with a nested gene-specific primer and the universal amplification primer. Finally, the amplified products are fractionated, cloned, and sequenced. Using this method, we cloned the upstream region of a salt-induced gene based upon a partial cDNA clone (RSC5-U) obtained from sunflower (Helianthus annuus L.).     

猪FGL2基因cDNA末端序列检测及结构分析

检测猪FGL2基因cDNA末端序列并对该基因结构初步分析。α-32P dCTP放射性同位素标记cDNA探针筛选猪基因组DNA文库;cDNA末端快速扩增(rapid amplification of cDNA end,RACE)。以猪正常小肠及心脏组织提取新鲜总RNA,反转录后作为模板,设计基因特异性引物,采用Advantage 2 聚合酶混合物进行PCR扩增;依据猪与人FGL2基因3′端已知同源序列设计PCR上游引物,以人FGL2基因3′末端序列设计下游引物,以猪基因组DNA为模板采用Advantage 2 聚合酶混合物进行PCR反应;PCR载体重组质粒DNA亚克隆扩增。同位素探针未能筛选到特异阳性克隆,RACE反应检测到特异性转录起始位置及第一个转录终止位置,但仍未检测到第二个转录终止位置。猪基因组DNA行PCR扩增成功检测到猪FGL2基因3′末端未知序列及第二个转录终止位置。     

Activities of human DNA polymerase kappa in response to the major benzo[a]pyrene DNA adduct: error-free lesion bypass and extension synthesis from opposite the lesion

In cells, the major benzo[a]pyrene DNA adduct is the highly mutagenic (+)-trans-anti-BPDE-N(2)-dG. In eukaryotes, little is known about lesion bypass of this DNA adduct during replication. Here, we show that purified human Polkappa can effectively bypass a template (+)-trans-anti-BPDE-N(2)-dG adduct in an error-free manner. Kinetic parameters indicate that Polkappa bypass of the (-)-trans-anti-BPDE-N(2)-dG adduct was approximately 41-fold more efficient compared to the (+)-trans-anti-BPDE-N(2)-dG adduct. Furthermore, we have found another activity of human Polkappa in response to the (+)- and (-)-trans-anti-BPDE-N(2)-dG adducts: extension synthesis from mispaired primer 3' ends opposite the lesion. In contrast, the two adducts strongly blocked DNA synthesis by the purified human Polbeta and the purified catalytic subunits of yeast Polalpha, Poldelta, and Pol epsilon right before the lesion. Extension by human Polkappa from the primer 3' G opposite the (+)- and (-)-trans-anti-BPDE-N(2)-dG adducts was mediated by a -1 deletion mechanism, probably resulting from re-aligning the primer G to pair with the next template C by Polkappa prior to DNA synthesis. Thus, sequence contexts 5' to the lesion strongly affect the fidelity and mechanism of the Polkappa-catalyzed extension synthesis. These results support a dual-function model of human Polkappa in bypass of BPDE DNA adducts: it may function both as an error-free bypass polymerase alone and an extension synthesis polymerase in combination with another polymerase.