Rechargeable biocidal cellulose: Synthesis and application of 3-(2,3-dihydroxypropyl)-5,5-dimethylimidazolidine-2,4-dione

An N-halamine precursor containing two hydroxyl groups (diol) has been synthesized. The N-halamine diol precursor was coated onto cotton fabrics with the assistance of the cross-linking agent BTCA. The surface of the coated cotton could be rendered biocidal by exposure to dilute hypochlorite solutions. Syntheses routes, characterization data, and antimicrobial test results will be presented. The durability and rechargeability of chlorine on the coated cotton was determined according to an AATCC standard washing test. The chlorinated cotton swatches were challenged with Staphylococcus aureus (ATCC 6538) and Escherichia coli O157:H7 (ATCC 43895) and showed excellent efficacy against these two bacterial species within a brief time of contact. Over 70% of the chlorine lost after repeated washing or UVA irradiation could be regained upon rechlorination.     

Optimizing acidified bleach solutions to improve sporicidal efficacy on building materials

Aims: We evaluated whether lowering pH (with acetic acid) and raising free available chlorine (FAC) levels in bleach solutions would improve efficacy in inactivating Bacillus spores on different materials. We also determined how varying pH and FAC levels affected bleach stability. Methods and Results: Acidified bleach solutions with pH levels of 4·5, 6 and 7·5 and FAC levels between 5000 and 10 000 ppm were evaluated for decontamination efficacy against Bacillus subtilis spores inoculated onto test coupons made from wood, ceramic and galvanized steel. Lowering the pH or increasing the FAC level improved efficacy in some of the tests, but depended on the material, which significantly affected decontamination efficacy. The acidified bleach at pH of 7·5 was significantly less effective than bleach at a pH of 4·5 or 6. The FAC levels in the bleach were the most stable at pH 4·5, and stability at pH 4·5 was not significantly affected by the initial FAC level. Conclusions: It may be advisable to use bleach solutions with lower pH (rather than high FAC levels) in light of both the decontamination efficacy and bleach stability results. For wood materials, use of sporicides other than acidified bleach may be warranted. Significance and Impact of the Study: These results may be useful in preparing acidified bleach solutions for decontamination of materials contaminated with spores such as Bacillus anthracis.     

Bleach-induced Germination and Breakage of Dormancy of Seeds of Alectra vogelii

The effects of solutions of sodium hypochlorite and calcium hypochlorite (bleach) on dormancy and germination of Alectra vogelii seeds were investigated. Dry (non-pretreated) and 10-day water-pretreated seeds were exposed to various bleach concentrations, as well as to the host (Vigna unguiculata) root exudate. The 15-month-old Alectra seeds used were partially dormant in that only 40% or less of the 10-day pretreated seeds could be stimulated to germinate by the standard host root exudate. Comparable percentage germination of nonpretreated seeds was achieved with certain concentrations of bleach and the halogens, chlorine and bromine. Bleach and the halogens served not only as germination stimulant for pretreated Alectra seeds but appropriate concentrations induced also high percentage (70–90%) germination indicating a breakage of seed dormancy as well. The activity of the bleach in stimulating high percentage germination could be significantly reduced when the optimally bleach-treated seeds were rinsed daily with water during the germination period. Vigna root exudate, but not bleach, was shown to act as root stimulant for Alectra seedlings. The possible mechanism of the bleach effect on germination and dormancy of Alectra seeds is discussed.     

Biological succession on silicone fouling‐release surfaces: Long‐term exposure tests in the harbour of ischia,Italy

A static test site was set up in the Harbour of Ischia (Gulf of Naples, Italy) to investigate the antifouling effectiveness of newly developed non‐polluting coatings. Two‐year exposure experiments were performed on sets of panels coated with silicone‐based coatings, and results were compared both to sets of panels coated with toxic agents, and non‐toxic epoxydic compounds. Abiotic factors, strength of adhesion of the temporal dynamics of succession of foulers were analyzed throughout the period of immersion. Brown algae constantly represented the “border point”; between the early community, dominated by sume, micro‐ and macroalgae, and the late community, mainly represented by bryozoans and molluscs, as well as polychaetes, sponges and tunicates. Brown algae, such as Ectocarpus siliculosus, tunicates (mainly Botryllus schlossen) and polychaetes (Hydroides elegans, Pileolaria pseudomilitaris) were demonstrated to be key species, triggering the community and influencing its development. Light was the main abiotic factor discriminating the community on the two sides of panels exposed to different irradiances. The best performing coatings (silicone easy release coatings without additives) substantially influenced community structure, shifting it to the earliest stages of colonization. Silicone coatings proved to be unsuitable for colonization by organisms typical of mature communities, due to their low energy surfaces. The results of the present paper demonstrate that silicone coatings technology represents an alternative to the use of biocidal antifouling paints.     

Effect of chlorination on the development of marine biofilms dominated by diatoms

This study addressed the antifouling efficiency of commercially available chlorine at different concentrations (0.5%, 1%, and 2%) and exposure times (0.5?min, 1?min, 5?min, and 15 min). The rapid and non-destructive FIRe (fluorescence induction and relaxation) technique was used to evaluate the effects of the biocide on diatom dominated biofilms. The efficiency of chlorine in removing diatoms from the developed biofilms increased with an increase in concentration and exposure time. The fluorescence measurements revealed low F(v)/F(m) and high σ(PSII) values for chlorine-treated Navicula and Amphora biofilms indicating that chlorination was efficient in damaging the photosystem-II reaction centers. Chlorination also caused mortality of diatom cells by damaging the cell body. In natural biofilms, the biocidal effect of chlorine was species specific; species of Amphiphrora, Navicula, Cylindrotheca, and Coscinodiscus showed an increase in the density of the population, but species of Pleurosigma, Amphora, and Thalassionema did not increase in density after chlorine treatment. It was also demonstrated that diatoms can colonize, grow and photosynthesize on chlorine-treated surfaces. Under pulse chlorination (treatment every 6 h), irrespective of chlorine concentration, the development of biofouling decreased with an increase in exposure time. Differences between exposure times of 1 to 15?min were not significant. Additionally, transmission levels of the control (non-chlorine-treated) fouled coupons reduced significantly (～20%) compared to the chlorine-treated fouled coupons (<2%). These results suggest that chlorine can be used as a biocide to control the development of diatom biofilms.     

Polygodial: a contact active antifouling biocide

Ongoing investigation of the candidate antifouling (AF) biocide polygodial (PG) has revealed that this compound may be contact active, whereby it can confer effect while remaining bound within a stable matrix. To test this hypothesis, the AF activity of PG-laced coatings was compared to that of seawater in which PG-laced coatings had been soaked. Four coating types spanning high to low affinity for PG were examined and AF activity was assessed based on inhibition of settlement and metamorphosis of larvae of three fouling organisms: Ciona savignyi Herdman, Mytilus galloprovincialis Lamarck and Spirobranchus caraniferus Gray. Direct exposure to the coatings had a significantly greater impact on larval metamorphosis than indirect exposure to seawater in which the coatings had been soaked. In particular, metamorphosis was almost completely inhibited by high-affinity coatings containing ≥ 200 ng of PG per replicate, while corresponding soaking waters had no detectable effect. These findings support the assertion that PG is contact active.     

Diatom community structure on commercially available ship hull coatings

Diatoms are primary colonizers of both antifouling and fouling-release ship hull coatings. There are few published studies which report on diatom community development on modern ship hull coatings. This study reports diatom communities on eight commercial marine ship hull coatings exposed at three static immersion sites along the east coast of Florida, viz. Daytona, Sebastian, and Miami. The coatings tested were three ablative copper systems (Ameron ABC-3, International BRA-640, and Hempel Olympic 76600), two copper-free biocidal systems (E-Paint SN-1, Sherwin Williams HMF), and three fouling-release (FR) systems (International Intersleek 700, International Intersleek 900, and Hempel Hempasil). One hundred and twenty-seven species comprising 44 genera were identified, including some of the more commonly known foulers, viz. Achnanthes, Amphora, Cocconeis, Entomoneis, Licmophora, Melosira, Navicula, Nitzschia, Synedra, and Toxarium. A significant difference was seen among sites, with the more estuarine site, Sebastian, having lower overall diatom abundance and higher diversity than Daytona and Miami. Copper coatings were primarily fouled by Amphora delicatissima and Entomoneis pseudoduplex. Copper-free coatings were fouled by Cyclophora tenuis, A. delicatissima, Achnanthes manifera, and Amphora bigibba. FR surfaces were typified by C. tenuis, and several species of Amphora. The presence of C. tenuis is new to the biofouling literature, but as new coatings are developed, this diatom may be one of many that prove to be problematic for static immersion. Results show coatings can be significantly influenced by geographical area, highlighting the need to test ship hull coatings in locations similar to where they will be utilized.     

Continuation of sexual reproduction in <Emphasis Type="Italic">Montipora capitata</Emphasis> following bleaching

Bleaching is generally expected to produce detrimental impacts on coral reproduction. This study compared the fecundity of bleached and unbleached colonies of the Hawaiian coral Montipora capitata. It was hypothesized that bleaching would have no effect on reproduction because previous studies have shown that Montipora capitata can increase heterotrophic feeding following bleaching. Reproductive parameters, total reproductive output (bundles released ml⁻¹ coral colony), number of eggs bundle⁻¹, and egg size, measured in the summer of 2005 did not differ between colonies that bleached or did not bleach during 2004. These data were collected following a single bleaching event and cannot be used to predict the outcome should bleaching episodes become more frequent or severe.     

Dechlorination of high-molecular-mass compounds in spent sulphite bleach effluents by free and immobilized cells of streptomycetes

Streptomyces chromofuscus and S. rochei dechlorinated high-molecular-mass compounds (HMM) from industrial bleach effluents. Compounds of the effluents from the first chlorination [(C + D)_red] and the subsequent alkaline extraction stage (E₁O) of a sulphite cellulose pulp mill were used as substrates for the microbial transformations. HMM bleach effluent fractions obtained by ultrafiltration were treated by free and immobilized cells in two types of bioreactors. The dechlorination was followed by measuring the reduction of activated-carbon-adsorbable organic-bound halogen (AOX) and the release of inorganic chloride. While 38–45% of the organic bound chlorine was released from a mixture of (C + D)_red and E₁O stage effluents within 20 days of incubation with S. chromofuscus, only 11–16% were liberated from E₁O-stage HMM bleach-effluent compounds by S. chromofuscus and S. rochei. Immobilized cells of both strains remained active for over 100 days in successive batches, each releasing 12–24% of chloride from HMM bleach-effluent compounds.     

Natural variability and effects of cleaning and storage procedures on vertebral chemistry of the blacktip shark Carcharhinus limbatus

Key methodological assumptions regarding the degree of natural variability and influence of sample handling and storage of elasmobranch vertebral chemistry were assessed using laser‐ablation inductively coupled plasma mass spectrometry. Vertebral chemistry of juvenile blacktip sharks Carcharhinus limbatus was examined to identify whether differences existed among different regions of the vertebral column, between thoracic vertebrae of individual fish or within individual vertebrae. Additionally, the effects of bleach exposure and storage in ethanol on vertebral chemistry were compared. No significant variation in vertebral chemistry was found among different regions of the vertebral column or between thoracic vertebrae, but significant differences among transect locations within individual vertebrae were observed. The variation at all three levels appears comparable with published data on sagittal otoliths of bilaterally symmetrical teleost fishes. The experimental assessment of potential treatment effects indicated vertebral chemistry was not significantly affected by bleach or exposure to ethanol. Taken together, these results support the idea that vertebrae taken from the same region of the vertebral column can be treated as equivalent and at least certain elements remain robust to exposure to bleach and ethanol.     

Colonisation and succession of marine biofilm-dwelling ciliate assemblages on biocidal antifouling and fouling-release coatings in temperate Australia

Ciliate assemblages are often overlooked, but ubiquitous components of microbial biofilms which require a better understanding. Ciliate, diatom and bacterial colonisation were evaluated on two fouling-release (FR) coatings, viz. Intersleek 970 and Hempasil X3, and two biocidal antifouling (AF) coatings, viz. Intersmooth 360 and Interspeed 5640, in Port Phillip Bay, Australia. A total of 15 genera were identified during the 10 week deployment. Intersleek 970 displayed the most rapid fouling by ciliates, reaching 63.3(± 5.9) cells cm^?2. After 10 weeks, all four coatings were extensively fouled. However, the toxicity of the AF coatings still significantly inhibited microbial fouling compared to the FR coatings. On all treatments, colonies of sessile peritrichs dominated the ciliate assemblage in the early stage of succession, but as the biofilm matured, vagile ciliates exerted more influence on the assemblage structure. The AF coatings showed selective toxic effects, causing significant differences in the ciliate species assemblages among the treatments.     

Effects of three oxidizing biocides on Legionella pneumophila serogroup 1

A study was conducted to determine the bactericidal effects of ozone and hydrogen peroxide relative to that of free chlorine on Legionella pneumophila serogroup 1. In laboratory batch-type experiments, organisms seeded at various densities were exposed to different concentrations of these biocides in demand-free buffers. Bactericidal effects were measured by determining the ability of L. pneumophila to grow on buffered charcoal-yeast extract agar supplemented with alpha-ketoglutarate. Ozone was the most potent of the three biocides, with a greater than 99% kill of L. pneumophila occurring during a 5-min exposure to 0.10 to 0.30 micrograms of O3 per ml. The bactericidal action of O3 was not markedly affected by changes in pH or temperature. Concentrations of 0.30 and 0.40 micrograms of free chlorine per ml killed 99% of the L. pneumophila after 30- and 5-min exposures, respectively. A 30-min exposure to 1,000 micrograms of H2O2 per ml was required to effect a 99% reduction of the viable L. pneumophila population. However, no viable L. pneumophila could be detected after a 24-h exposure to 100 or 300 micrograms of H2O2 per ml. Attempts were made to correlate the biocidal effects of O3 and H2O2 with the oxidation of L. pneumophila fatty acids. These tests indicated that certain biocidal concentrations of O3 and H2O2 resulted in a loss or severe reduction of L. pneumophila unsaturated fatty acids.     

Effects of three oxidizing biocides on Legionella pneumophila serogroup 1.

A study was conducted to determine the bactericidal effects of ozone and hydrogen peroxide relative to that of free chlorine on Legionella pneumophila serogroup 1. In laboratory batch-type experiments, organisms seeded at various densities were exposed to different concentrations of these biocides in demand-free buffers. Bactericidal effects were measured by determining the ability of L. pneumophila to grow on buffered charcoal-yeast extract agar supplemented with alpha-ketoglutarate. Ozone was the most potent of the three biocides, with a greater than 99% kill of L. pneumophila occurring during a 5-min exposure to 0.10 to 0.30 micrograms of O3 per ml. The bactericidal action of O3 was not markedly affected by changes in pH or temperature. Concentrations of 0.30 and 0.40 micrograms of free chlorine per ml killed 99% of the L. pneumophila after 30- and 5-min exposures, respectively. A 30-min exposure to 1,000 micrograms of H2O2 per ml was required to effect a 99% reduction of the viable L. pneumophila population. However, no viable L. pneumophila could be detected after a 24-h exposure to 100 or 300 micrograms of H2O2 per ml. Attempts were made to correlate the biocidal effects of O3 and H2O2 with the oxidation of L. pneumophila fatty acids. These tests indicated that certain biocidal concentrations of O3 and H2O2 resulted in a loss or severe reduction of L. pneumophila unsaturated fatty acids.     

Feinstrukturelle und mikroanalytische Untersuchungen an den Kristallen und Lithosomen des CiliatenEuplotes vannus

Summary In the cytoplasm of the marine ciliateEuplotes vannus, there exist two conspicuous types of membrane bound inclusions: 1. irregularly shaped crystals which are highly anisotropic; 2. globular lithosomes characterized by concentrically arranged layers of deposits which exhibit only faint birefringence. Normally, both structures form distinct accumulations. Energy dispersive X-ray microanalysis of these accumulations reveals a high content of calcium and phosphorus, besides magnesium, sulphur and chlorine. Analysis of cell areas devoid of the inclusions show significantly lower calcium- and phosphorus-peaks.

     

Possible role of reactive chlorine in microbial antagonism and organic matter chlorination in terrestrial environments

Several studies have demonstrated that extensive formation of organically bound chlorine occurs both in soil and in decaying plant material. Previous studies suggest that enzymatic formation of reactive chlorine outside cells is a major source. However, the ecological role of microbial-induced extracellular chlorination processes remains unclear. In the present paper, we assess whether or not the literature supports the hypothesis that extracellular chlorination is involved in direct antagonism against competitors for the same resources. Our review shows that it is by no means rare that biotic processes create conditions that render biocidal concentrations of reactive chlorine compounds, which suggest that extracellular production of reactive chlorine may have an important role in antagonistic microbial interactions. To test the validity, we searched the UniprotPK database for microorganisms that are known to produce haloperoxidases. It appeared that many of the identified haloperoxidases from terrestrial environments are originating from organisms that are associated with living plants or decomposing plant material. The results of the in silico screening were supported by various field and laboratory studies on natural chlorination. Hence, the ability to produce reactive chlorine seems to be especially common in environments that are known for antibiotic-mediated competition for resources (interference competition). Yet, the ability to produce haloperoxidases is also recorded, for example, for plant endosymbionts and parasites, and there is little or no empirical evidence that suggests that these organisms are antagonistic.     

On-line monitoring of antifouling and fouling-release surfaces using bioluminescence and fluorescence measurements during laminar flow

A laminar flow biofilm-monitoring system was used to determine the efficacies of three antifouling (AF) coatings and five fouling-release (FR) coatings againstVibrio harveyi attachment. On-line measurements of tryptophan fluorescence and bioluminescence from each coating, normalized to an upstream stainless steel coupon, were used to determine the effects of AF and FR surfaces on biofilm formation. The AF coatings consisted of 5, 10, and 35 wt% Sea Nine 211 (C9211) incorporated into a vinyl copolymer. Both the 10 and 35 wt% coatings significantly inhibited biofilm biomass development measured by tryptophan fluorescence compared to the stainless steel control.V. harveyi bioluminescence was significantly greater than tryptophan fluorescence in cells attached to these coatings, suggesting that bioluminescence expression may be a marker for cellular stress or toxicity in biofilms. Five different polydimethylsiloxane (PDMS) FR coatings did not inhibit biofilm formation under low flow conditions. However, four PDMS coatings demonstrated decreased biomass levels compared to stainless steel after exposure to a shear stress of 330 dynes cm^–2. There was no toxic additive in these coatings; bioluminescence and tryptophan fluorescence were proportional.     

Efficacy of bromochlorodimethylhydantoin againstLegionella pneumophila in industrial cooling water

Summary Free residual chlorine and bromine can be generated in water from bromochlorodimethylhydantoin (BCDMH). Efficacy of chlorine from inorganic sources has been studied extensively, but there is much less information on the efficacy of bromine againstL. pneumophila; only a few efficacy studies of organically-derived. halogen appear in the literature and the results from different studies conflict or are difficult to interpret. This paper describes the efficacy of halogen from BCDMH against planktonic, pure cultureL. pneumophila in an industrial cooling water. There was no difference in efficacy between halogen derived from organic or inorganic sources in controlled laboratory experiments. Effective doses in laboratory studies cannot be translated directly to field applications because of significant differences in the microbiology. However, the data suggest that disinfection (>99.9% reduction in viability within 10 min) of planktonic, pure cultureL. pneumophila can be achieved with about 1 ppm free residual halogen (expressed as chlorine) from BCDMH in a typical industrial cooling water.     

N-Halamine-coated cotton for antimicrobial and detoxification applications

A new N-halamine precursor, 3-(2,3-dihydroxypropyl)-7,7,9,9-tetramethyl-1,3,8-triazaspiro[4.5]decane-2,4-dione (TTDD diol), was synthesized and bonded onto cotton fabrics. Fabrics with variable amounts of chlorine loading were prepared by using several concentrations of TTDD diol. A second N-halamine precursor, 3-(3-triethoxysilylpropyl)-7,7,9,9-tetramethyl-1,3,8-triazaspiro[4.5]decane-2,4-dione (TTDD siloxane), was also synthesized and bound to cotton for comparison purposes. The coated cotton fabrics contained two types of N–Cl moieties after chlorination of the amine and amide groups. Swatches with variable chlorine loadings were challenged with Staphylococcus aureus and Escherichia coli O157:H7 as a function of contact time. The biocidal test results showed that the chlorine loadings and surface hydrophobicities influenced the antimicrobial efficacies. The chlorinated swatches have also been employed to oxidize the simulant of chemical mustard to the less toxic sulfoxide derivative.     

Comparative study of biofilm formation on biocidal antifouling and fouling-release coatings using next-generation DNA sequencing

The bacterial and eukaryotic communities forming biofilms on six different antifouling coatings, three biocidal and three fouling-release, on boards statically submerged in a marine environment were studied using next-generation sequencing. Sequenced amplicons of bacterial 16S ribosomal DNA and eukaryotic ribosomal DNA internal transcribed spacer were assigned taxonomy by comparison to reference databases and relative abundances were calculated. Differences in species composition, bacterial and eukaryotic, and relative abundance were observed between the biofilms on the various coatings; the main difference was between coating type, biocidal compared to fouling-release. Species composition and relative abundance also changed through time. Thus, it was possible to group replicate samples by coating and time point, indicating that there are fundamental and reproducible differences in biofilms assemblages. The routine use of next-generation sequencing to assess biofilm formation will allow evaluation of the efficacy of various commercial coatings and the identification of targets for novel formulations.