NMR Structure of the C-terminal domain of a tyrosyl-tRNA synthetase that functions in group I intron splicing

The mitochondrial tyrosyl-tRNA synthetases (mt TyrRSs) of Pezizomycotina fungi are bifunctional proteins that aminoacylate mitochondrial tRNA(Tyr) and are structure-stabilizing splicing cofactors for group I introns. Studies with the Neurospora crassa synthetase (CYT-18 protein) showed that splicing activity is dependent upon Pezizomycotina-specific structural adaptations that form a distinct group I intron-binding site in the N-terminal catalytic domain. Although CYT-18's C-terminal domain also binds group I introns, it has been intractable to X-ray crystallography in the full-length protein. Here, we determined an NMR structure of the isolated C-terminal domain of the Aspergillus nidulans mt TyrRS, which is closely related to but smaller than CYT-18's. The structure shows an S4 fold like that of bacterial TyrRSs, but with novel features, including three Pezizomycontia-specific insertions. (15)N-(1)H two-dimensional NMR showed that C-terminal domains of the full-length A. nidulans and Geobacillus stearothermophilus synthetases do not tumble independently in solution, suggesting restricted orientations. Modeling onto a CYT-18/group I intron cocrystal structure indicates that the C-terminal domains of both subunits of the homodimeric protein bind different ends of the intron RNA, with one C-terminal domain having to undergo a large shift on its flexible linker to bind tRNA(Tyr) or the intron RNA on either side of the catalytic domain. The modeling suggests that the C-terminal domain acts together with the N-terminal domain to clamp parts of the intron's catalytic core, that at least one C-terminal domain insertion functions in group I intron binding, and that some C-terminal domain regions bind both tRNA(Tyr) and group I intron RNAs.     

Serum albumin domain secondary structure prediction

A new method has been used to predict probability profiles for helix, beta-sheet and bend structures along the entire sequence and derive an averaged profile for the three homologous domains. The results are correlated with the disulphide bridge pattern, the distribution of hydrophobic sites and points where albumin is cleaved by enzymes.     

Chemical shift assignments and secondary structure prediction of the C-terminal domain of the response regulator BfmR from Acinetobacter baumannii

Acinetobacter baumannii is a Gram-negative pathogen responsible for severe nocosomial infections by forming biofilms in healthcare environments. The two-domain response regulator BfmR has been shown to be the master controller for biofilm formation. Inactivation of BfmR resulted in an abolition of pili production and consequently biofilm creation. Here we report backbone and sidechain resonance assignments and secondary structure prediction for the C-terminal domain of BfmR (residues 130–238) from A. baumannii.     

Retrospective analysis of a secondary structure prediction: the catalytic domain of matrix metalloproteinases.

Secondary structure prediction of the catalytic domain of matrix metalloproteinases is evaluated in the light of recently published experimentally determined structures. The prediction was made by combining conformational propensity, surface probability, and residue conservation calculated for an alignment of 19 sequences. The position of each observed secondary structure element was correctly predicted with a high degree of accuracy, with a single beta-strand falsely predicted. The domain fold was also anticipated from the prediction by analogy with the structural elements found in the distantly related metalloproteinases thermolysin, astacin, and adamalysin.     

Asymmetry of tyrosyl-tRNA synthetase in solution

The tyrosyl-tRNA synthetase from Bacillus stearothermophilus crystallizes as a symmetrical dimer with each subunit having a complete active site. The enzyme-substrate complexes, however, are known to be asymmetrical in solution because the enzyme exhibits half-of-the-sites activity by binding tightly only 1 mol of tyrosine or 1 mol of tyrosyl adenylate per mole of dimer. Evidence is now presented that the unligated enzyme is also asymmetrical in solution. Symmetry was investigated by construction of heterodimers containing one full-length subunit and one truncated subunit, allowing the introduction of different mutations into each monomer. Each dimer is active at only one site, but the site used is randomly distributed between the subunits. Each heterodimer thus consists of two equal populations, one activating tyrosine at a full-length subunit and the other at the truncated subunit. No detectable interconversion is found between active and inactive sites over several minutes either in the absence of substrates or when the enzyme is turning over in the steady state. Kinetic evidence implies that wild-type enzyme is inherently asymmetrical even in the absence of substrate.     

The anticodon-binding domain of tyrosyl-tRNA synthetase: state of folding and origin of the crystallographic disorder

The C-terminal domain (residues 320-419) of tyrosyl-tRNA synthetase (TyrRS) from Bacillus stearothermophilus is disordered in the crystal structure. Its function consists of binding the anticodon of tRNA(Tyr). We undertook to characterize its conformational state. A hybrid between the C-terminal fragment and a His-tag sequence was constructed and purified in large amounts. Analyses by mass spectrometry and analytical ultracentrifugation showed that the C-terminal fragment, thus purified, was not degraded and that it neither dimerized nor aggregated. Its far- and near-UV circular dichroism spectra revealed a high content in secondary structures and an asymmetrical environment of its aromatic residues. Each spectrum could be reconstructed by the difference between the corresponding spectra for the full-length TyrRS and for its N-terminal fragment. The Stokes radius of the C-terminal fragment, measured by size exclusion chromatography, indicated a condensed globular state. The fluorescence of ANS (a small hydrophobic probe) showed that the surface of the C-terminal fragment was more hydrophilic than that of a molten globule. These results on the C-terminal fragment and our previous observations that it can undergo cooperative transitions, demonstrated the following points: it is not in a disordered or molten globular state, it has a defined and stable three-dimensional structure, its structures are similar in its isolated and integrated forms, and the apparent disorder in the crystals of the full-length synthetase must be due to the flexibility of the polypeptide segment that links the N- and C-terminal domains. Thus, TyrRS has not evolved strong noncovalent interactions between its catalytic and anticodon-binding domains, contrary to the other synthetases.     

Crystal structure of human mitochondrial tyrosyl-tRNA synthetase reveals common and idiosyncratic features

We report the structure of a strictly mitochondrial human synthetase, namely tyrosyl-tRNA synthetase (mt-TyrRS), in complex with an adenylate analog at 2.2 A resolution. The structure is that of an active enzyme deprived of the C-terminal S4-like domain and resembles eubacterial TyrRSs with a canonical tyrosine-binding pocket and adenylate-binding residues typical of class I synthetases. Two bulges at the enzyme surface, not seen in eubacterial TyrRSs, correspond to conserved sequences in mt-TyrRSs. The synthetase electrostatic surface potential differs from that of other TyrRSs, including the human cytoplasmic homolog and the mitochondrial one from Neurospora crassa. The homodimeric human mt-TyrRS shows an asymmetry propagating from the dimer interface toward the two catalytic sites and extremities of each subunit. Mutagenesis of the catalytic domain reveals functional importance of Ser200 in line with an involvement of A73 rather than N1-N72 in tyrosine identity.     

SSEP-Domain: protein domain prediction by alignment of secondary structure elements and profiles

MOTIVATION: The prediction of protein domains is a crucial task for functional classification, homology-based structure prediction and structural genomics. In this paper, we present the SSEP-Domain protein domain prediction approach, which is based on the application of secondary structure element alignment (SSEA) and profile-profile alignment (PPA) in combination with InterPro pattern searches. SSEA allows rapid screening for potential domain regions while PPA provides us with the necessary specificity for selecting significant hits. The combination with InterPro patterns allows finding domain regions without solved structural templates if sequence family definitions exist. RESULTS: A preliminary version of SSEP-Domain was ranked among the top-performing domain prediction servers in the CASP 6 and CAFASP 4 experiments. Evaluation of the final version shows further improvement over these results together with a significant speed-up. AVAILABILITY: The server is available at http://www.bio.ifi.lmu.de/SSEP/     

Structure and function of the C-terminal domain of methionyl-tRNA synthetase

The minimal polypeptide supporting full methionyl-tRNA synthetase (MetRS) activity is composed of four domains: a catalytic Rossmann fold, a connective peptide, a KMSKS domain, and a C-terminal alpha helix bundle domain. The minimal MetRS behaves as a monomer. In several species, MetRS is a homodimer because of a C-terminal domain appended to the core polypeptide. Upon truncation of this C-terminal domain, subunits dissociate irreversibly. Here, the C-terminal domain of dimeric MetRS from Pyrococcus abyssi was isolated and studied. It displays nonspecific tRNA-binding properties and has a crystalline structure closely resembling that of Trbp111, a dimeric tRNA-binding protein found in many bacteria and archaea. The obtained 3D model was used to direct mutations against dimerization of Escherichia coli MetRS. Comparison of the resulting mutants to native and C-truncated MetRS shows that the presence of the appended C-domain improves tRNA(Met) binding affinity. However, dimer formation is required to evidence the gain in affinity.     

Purification and some properties of rat liver tyrosyl-tRNA synthetase.

Rat liver cytoplasmic tyrosine:tRNA ligase (tyrosine:tRNA ligase, EC 6.1.1.1) was purified by ultracentrifugation, DEAE-cellulose chromatography and repeated phosphocellulose chromatography by more than 1500-fold. The molecular weight of the enzyme was approx. 150 000 as determined by Sephadex G-200 gel filtration. On the basis of sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the enzyme consisted of two subunits, each of 68 000 daltons. We found the following Km values for the enzyme: 13 micrometer for tyrosine and 1.7 mM for ATP in the ATP:PPi exchange reaction and 13 micrometer for tyrosine, 210 micrometer for ATP and 0.14 micrometer for tRNATyr in the aminoacylation reaction. The rate of tyrosyl-tRNA synthesis was 50-fold lower than that of ATP:PPi exchange. Addition of a saturating amount of tRNA did not affect the rate of ATP:PPi exchange.     

Dynalign II: common secondary structure prediction for RNA homologs with domain insertions

Homologous non-coding RNAs frequently exhibit domain insertions, where a branch of secondary structure is inserted in a sequence with respect to its homologs. Dynamic programming algorithms for common secondary structure prediction of multiple RNA homologs, however, do not account for these domain insertions. This paper introduces a novel dynamic programming algorithm methodology that explicitly accounts for the possibility of inserted domains when predicting common RNA secondary structures. The algorithm is implemented as Dynalign II, an update to the Dynalign software package for predicting the common secondary structure of two RNA homologs. This update is accomplished with negligible increase in computational cost. Benchmarks on ncRNA families with domain insertions validate the method. Over base pairs occurring in inserted domains, Dynalign II improves accuracy over Dynalign, attaining 80.8% sensitivity (compared with 14.4% for Dynalign) and 91.4% positive predictive value (PPV) for tRNA; 66.5% sensitivity (compared with 38.9% for Dynalign) and 57.0% PPV for RNase P RNA; and 50.1% sensitivity (compared with 24.3% for Dynalign) and 58.5% PPV for SRP RNA. Compared with Dynalign, Dynalign II also exhibits statistically significant improvements in overall sensitivity and PPV. Dynalign II is available as a component of RNAstructure, which can be downloaded from http://rna.urmc.rochester.edu/RNAstructure.html.     

Crystal structure of a deletion mutant of a tyrosyl-tRNA synthetase complexed with tyrosine

The crystal structure of a deletion mutant of tyrosyl-tRNA synthetase from Bacillus stearothermophilus has been determined at 2.5 A resolution using molecular replacement techniques. The genetically engineered molecule catalyses the activation of tyrosine with kinetic properties similar to those of the wild-type enzyme but no longer binds tRNATyr. It contains 319 residues corresponding to the region of the polypeptide chain for which interpretable electron density is present in crystals of the wild-type enzyme. The partly refined model of the wild-type enzyme was used as a starting point in determining the structure of the truncated mutant. The new crystals are of space group P2(1) and contain the molecular dimer within the asymmetric unit. The refined model has a crystallographic R-factor of 18.7% for all reflections between 8 and 2.5 A. Each subunit contains two structural domains: the alpha/beta domain (residues 1 to 220) containing a six-stranded beta-sheet and the alpha-helical domain (residues 248 to 319) containing five helices. The alpha/beta domains are related by a non-crystallographic dyad while the alpha-helical domains are in slightly different orientations in the two subunits. The tyrosine substrate binds in a slot at the bottom of a deep active site cleft in the middle of the alpha/beta domain. It is surrounded by polar side-chains and water molecules that are involved in an intricate hydrogen bonding network. Both the alpha-amino and hydroxyl groups of the substrate make good hydrogen bonds with the protein. The amino group forms hydrogen bonds with Tyr169-OH, Asp78-OD1 and Gln173-OE1. The phenolic hydroxyl group forms hydrogen bonds with Asp76-OD1 and Tyr34-OH. In contrast, the substrate carboxyl group makes no direct interactions with the enzyme. The results of both substrate inhibition studies and site-directed mutagenesis experiments have been examined in the light of the refined structure.     

Crystal structure of the lambda repressor C-terminal domain octamer.

The three-dimensional structure of the lambda repressor C-terminal domain (CTD) has been determined at atomic resolution. In the crystal, the CTD forms a 2-fold symmetric tetramer that mediates cooperative binding of two repressor dimers to pairs of operator sites. Based upon this structure, a model was proposed for the structure of an octameric repressor that forms both in the presence and absence of DNA. Here, we have determined the structure of the lambda repressor CTD in three new crystal forms, under a wide variety of conditions. All crystals have essentially the same tetramer, confirming the results of the earlier study. One crystal form has two tetramers bound to form an octamer, which has the same overall architecture as the previously proposed model. An unexpected feature of the octamer in the crystal structure is a unique interaction at the tetramer-tetramer interface, formed by residues Gln209, Tyr210 and Pro211, which contact symmetry-equivalent residues from other subunits of the octamer. Interestingly, these residues are also located at the dimer-dimer interface, where the specific interactions are different. The structures thus indicate specific amino acid residues that, at least in principle, when altered could result in repressors that form tetramers but not octamers.     

The BRCA1 C-terminal domain: structure and function

The BRCA1 C-terminal region contains a duplicated globular domain termed BRCT that is found within many DNA damage repair and cell cycle checkpoint proteins. The unique diversity of this domain superfamily allows BRCT modules to interact forming homo/hetero BRCT multimers, BRCT-non-BRCT interactions, and interactions with DNA strand breaks. The sequence and functional diversity of the BRCT superfamily suggests that BRCT domains are evolutionarily convenient interaction modules.     

The isolation of a peptide from the catalytic domain of Bacillus stearothermophilus tryptophyl-tRNA synthetase. The interaction of Brown MX-5BR with tyrosyl-tRNA synthetase.

Tryptophyl-tRNA synthetase is irreversibly inactivated by Procion Brown MX-5BR with an apparent dissociation constant (KD) of 8.8 microM and maximum rate of inactivation k3 0.192 s-1. The specificity of the interaction is supported by two previously reported observations. Firstly, Brown MX-5BR inactivation of tryptophyl-tRNA synthetase is inhibited by substrates, and secondly, the animated derivative of Brown MX-5BR is a competitive inhibitor of tryptophyl-tRNA synthetase with a Ki of 2 X 10(-4) M with respect to both tryptophan and ATP. Tryptic digestion of the dye-affinity-labelled enzyme and subsequent resolution of the peptides by h.p.l.c. yielded one major dye-peptide peak. Amino acid sequence analysis resulted in the identification of the dye-binding domain centred on lysine-178. Tyrosyl-tRNA synthetase is also inactivated by Procion Brown MX-5BR, and this inactivation is prevented by ATP but not by tyrosine. The interaction of tyrosyl-tRNA synthetase with hydroxylated Brown MX-5BR exhibited non-competitive kinetics with respect to the amino acid-binding site and competitive kinetics against ATP with a Ki of 6 X 10(-6) M.     

Overproduction of tyrosyl-tRNA synthetase is toxic to Escherichia coli: a genetic analysis.

The tyrS genes from Escherichia coli and Bacillus stearothermophilus were toxic to E. coli when they were carried by plasmids with very high copy numbers (pEMBL8 and pEMBL9). We quantified this effect by comparing the efficiencies of plating of E. coli derivatives harboring recombinant plasmids in various experimental conditions. The toxicity was apparent at both 30 and 37 degrees C. It increased with the growth temperature, the strength of the tyrS promoter, and the copy number of the plasmidic vector. Two- to threefold enhancement of tyrS expression raised the toxicity 300-fold. Point mutations in tyrS that prevent interaction between its product, tyrosyl-tRNA synthetase, and tRNA(Tyr) but do not alter the rate of formation of tyrosyl-adenylate abolished the toxicity. Thus, the toxic effect was due to high cellular levels of synthetase activity. At 30 degrees C, the cellular concentration of tyrosyl-tRNA synthetase reached 55% of that of soluble proteins and led to decreased beta-galactosidase stability. We discuss possible causes of this toxic effect and describe its applications to the study of the recognition and interaction between the synthetase and tRNA(Tyr).