Computational chemical analysis of Ru(II)‐Pheox–catalyzed highly enantioselective intramolecular cyclopropanation reactions

Computational chemical analysis of Ru(II)‐Pheox–catalyzed highly enantioselective intramolecular cyclopropanation reactions was performed using density functional theory (DFT). In this study, cyclopropane ring–fused γ‐lactones, which are 5.8 kcal/mol more stable than the corresponding minor enantiomer, are obtained as the major product. The results of the calculations suggest that the enantioselectivity of the Ru(II)‐Pheox–catalyzed intramolecular cyclopropanation reaction is affected by the energy differences between the starting structures 5l and 5i . The reaction pathway was found to be a stepwise mechanism that proceeds through the formation of a metallacyclobutane intermediate. This is the first example of a computational chemical analysis of enantioselective control in an intramolecular carbene‐transfer reaction using C₁‐symmetric catalysts.     

A chemiluminescence method to detect hydroquinone with water‐soluble sulphonato‐(salen)manganese(III) complex as catalyst

A water‐soluble sulphonato‐(salen)manganese(III) complex with excellent catalytic properties was synthesized and demonstrated to greatly enhance the chemiluminescence signal of the hydrogen peroxide ? luminol reaction. Coupled with flow‐injection technique, a simple and sensitive chemiluminescence method was first developed to detect hydroquinone based on the chemiluminescence system of the hydrogen peroxide–luminol–sulphonato‐(salen)manganese(III) complex. Under optimal conditions, the assay exhibited a wide linear range from 0.1 to 10 ng mL^–1 with a detection limit of 0.05 ng mL^–1 for hydroquinone. The method was applied successfully to detect hydroquinone in tap‐water and mineral‐water, with a sampling frequency of 120 times per hour. The relative standard deviation for determination of hydroquinone was less than 5.6%, and the recoveries ranged from 96.8 to 103.0%. The ultraviolet spectra, chemiluminescence spectra, and the reaction kinetics for the peroxide–luminol–sulphonato‐(salen)manganese(III) complex system were employed to study the possible chemiluminescence mechanism. The proposed chemiluminescence analysis technique is rapid and sensitive, with low cost, and could be easily extended and applied to other compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

Electronic and steric effects in cobalt Schiff bases complexes: Synthesis, characterization and catalytic activity of some cobalt(II) tetra-halogens-dimethyl salen complexes

The synthesis, characterization and catalytic activity of a series of tetra-halogeno-dimethyl salen cobalt (II) complexes are reported in this paper. The investigated complexes of cobalt (II) with Schiff bases are: αα′-di-methyl Salen cobalt (II) [Co(dMeSalen)], 3,3′,5,5′-tetra chloro α,α′-di-methyl Salen cobalt (II), [Co(tCldMeSalen)], 3,3′-di-bromo 5,5′-di-chloro α,α′-di-methyl Salen cobalt (II), [Co(tBrdMeSalen)], 3,3′,5,5′-tetra bromo α,α′-di-methyl Salen cobalt (II), [Co(tBrdMeSalen)] and 3,3′,5,5′-tetra iodo α,α′-di-methyl Salen cobalt (II), [Co(tIdMeSalen)] (where Salen is bis(salicylaldehyde)ethylenediamine). The characterization of the complexes was performed by elemental analysis, cyclic voltammetry, UV-Vis, IR and EPR spectroscopies. The study was made in DMF, and pyridine was used for coordination as axial base. The redox potential is influenced by the substituent grafted on aromatic ring and in the azomethynic position and also by the molecules coordinating in axial position (solvent, DMF, or pyridine). The catalytic oxygenation of 2,6-di-tert-butylphenol by these complexes leads to the obtention of benzoquinone and diphenoquinone products. The cobalt (II) complexes form reversible adducts with molecular oxygen.     

Ru(salen)-catalyzed asymmetric sulfimidation and subsequent [2,3]sigmatropic rearrangement

(OC)Ru(salen) 1 was found to catalyze sulfimidation of alkyl aryl sulfides in the presence of arylsulfonyl azide with high enantioselectivity, up to 99% ee. When the substrates were allylic sulfides, the resulting sulfimides underwent [2,3]sigmatropic rearrangement to give the corresponding N-allyl toluenesulsulfonamides with greater than 80% ee.     

Enantioselective cyanoformylation of aldehydes catalyzed with solid base mediated chiral V(V) salen complexes

Polymeric and monomeric V(V) chiral salen complexes‐catalyzed enantioselective ethyl cyanoformylation of aldehydes using ethyl cyanoformate as a source of cyanide was accomplished in the presence of several basic cocatalysts viz., NaOH, KOH, basic Al₂O₃ and hydrotalcite. Excellent yield (>95%) of chiral ethyl cyanohydrincarbonate with high enantioselectivity up to 94% was achieved in 24–36 h when hydrotalcite was used as an additive. The polymeric catalyst 1 is more reactive than the monomeric catalyst 2 to produce chiral ethyl cyanohydrincarbonate in high optical purity. The chiral polymeric catalyst 1 and cocatalysts hydrotalcite and basic alumina used in this study were recoverable and recyclable several times with retention of its performance. Chirality, 2010. © 2009 Wiley‐Liss, Inc.     

Folding strategy to prepare Co(II)-substituted metallo-beta-lactamase L1

In an effort to overcome previous problems with the preparation of Co(II)-substituted metallo-β-lactamase L1, two strategies were undertaken. Attempts to prepare Co(II)-substituted L1 using biological incorporation resulted in an enzyme that contained only 1 Eq of cobalt and exhibited no catalytic activity. Co(II)-substituted L1 could be prepared by refolding metal-free L1 in the presence of Co(II), and the resulting enzyme contained 1.8 Eq of cobalt, yielded a UV-Vis spectrum consistent with 5-coordinate Co(II), and exhibited a k_cat of 63 s⁻¹ and K_m of 20 μM when using nitrocefin as the substrate. Pre-steady-state fluorescence and UV-Vis studies demonstrated that refolded, Co(II)-substituted L1 uses the same kinetic mechanism as Zn(II)-containing L1, in which a reaction intermediate is formed when using nitrocefin as substrate. The described refolding strategy can be used to prepare other Co(II)-substituted Zn(II)-metalloenzymes, particularly those that contain a solvent-exposable disulfide, which often causes oxidation of Co(II) to Co(III).     

Transition metal-saccharide chemistry: d-glucose complexes of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II)

Metal complexes of d-glucose (d-Glc) from large cation containing dibromo-dichloro salts of dipositive metals [NEt₄]₂[MBr₂Cl₂] (M = Mn, Co, Ni, Cu and Zn) and the disodium salt of glucose were synthesized from a MeOH:MeCN mixture. The complexes were characterized by UV-vis absorption, circular dichroism, IR and proton magnetic resonance spectroscopies, and by elemental analysis, and were found to be Na[M(d-Glc)(OMe)Cl]. Cyclic voltammetric studies of these complexes, in the acidic to neutral pH range, indicated no dissociation, even in highly acidic conditions.This paper is dedicated to Professor Richard H. Holm (Harvard University) on the occasion of his 60th birthday.     

Advances in asymmetric oxidative kinetic resolution of racemic secondary alcohols catalyzed by chiral Mn(III) salen complexes

Enantiomerically pure secondary alcohols are essential compounds in organic synthesis and are used as chiral auxiliaries and synthetic intermediates in the pharmaceutical, agrochemical, and fine chemical industries. One of the attractive and practical approaches to achieving optically pure secondary alcohols is oxidative kinetic resolution of racemic secondary alcohols using chiral Mn(III) salen complexes. In the last decade, several chiral Mn(III) salen complexes have been reported with excellent enantioselectivity and activity in the homogeneous and heterogeneous catalysis of the oxidative kinetic resolution of racemic secondary alcohols. This review article is an overview of the literature on the recent development of chiral Mn(III) salen complexes for oxidative kinetic resolution of racemic secondary alcohols. The catalytic activity of monomeric, dimeric, macrocyclic, polymeric, and silica/resin supported chiral Mn(III) salen complexes is discussed in detail.     

Cleavage of recombinant proteins at poly-His sequences by Co(II) and Cu(II)

Improved ways to cleave peptide chains at engineered sites easily and specifically would form useful tools for biochemical research. Uses of such methods include the activation or inactivation of enzymes or the removal of tags for enhancement of recombinant protein expression or tags used for purification of recombinant proteins. In this work we show by gel electrophoresis and mass spectroscopy that salts of Co(II) and Cu(II) can be used to cleave fusion proteins specifically at sites where sequences of His residues have been introduced by protein engineering. The His residues could be either consecutive or spaced with other amino acids in between. The cleavage reaction required the presence of low concentrations of ascorbate and in the case of Cu(II) also hydrogen peroxide. The amount of metal ions required for cleavage was very low; in the case of Cu(II) only one to two molar equivalents of Cu(II) to protein was required. In the case of Co(II), 10 molar equivalents gave optimal cleavage. The reaction occurred within minutes, at a wide pH range, and efficiently at temperatures ranging from 0 degrees C to 70 degrees C. The work described here can also have implications for understanding protein stability in vitro and in vivo.     

Perturbation of the tris(2,2′‐bipyridine) ruthenium(II)‐catalyzed Belousov–Zhabotinsky oscillating chemiluminescence reaction by l‐cysteine and its application

Perturbation of the tris(2,2′‐bipyridine)ruthenium(II) [Ru(bpy)₃²⁺]‐catalyzed Belousov–Zhabotinsky (BZ) oscillating chemiluminescence (CL) reaction induced by l ‐cysteine was observed in the closed system. It was found that the CL intensity was decreased in the presence of l ‐cysteine. Meanwhile, oscillation period and oscillating induction period were prolonged. The sufficient reproducible induction period was used as parameter for the analytical application of oscillating CL reaction. Under the optimum conditions, the changes in the oscillating CL induction period were linearly proportional to the concentration of l ‐cysteine in the range from 8.0 × 10^?7 to 5.0 × 10^?5 mol L^?1 (r = 0.997) with a detection limit of 4.3 × 10^?7 mol L^?1. The possible mechanism of l ‐cysteine perturbation on the oscillating CL reaction was also discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Chemiluminescence method for the determination of piroxicam by the enhancement of the tris‐(4,7‐diphenyl‐1,10‐phenanthrolinedisulphonic acid) ruthenium(II) (RuBPS)–cerium(IV) system and its application

A simple, rapid chemiluminescence (CL) method was described for the determination of piroxicam, a commonly used analgesic agent drug. A strong CL signal was detected when cerium(IV) sulphate was injected into tris‐(4,7‐diphenyl‐1,10‐phenanthrolinedisulphonic acid) ruthenium(II) (RuBPS)–piroxicam solution. The CL signal was proportional to the concentration of piroxicam in the range 2.8 × 10^–8–1.2 × 10^–5 mol/L. The detection limit was 2 × 10^–8 mol/L and the relative standard deviation (RSD) was 3.7% (c = 7.0 × 10^–7 mol/L piroxicam; n = 11). The proposed method was applied to the determination of piroxicam in pharmaceutical preparations in capsules, spiked serum and urine samples with satisfactory results. Copyright © 2008 John Wiley & Sons, Ltd.     

Syntheses, crystal structures and properties of Cd(II) and Co(II) complexes with 4,4′-dipyridylsulfide ligand

Two new coordination polymers [Cd(dps)₂Cl₂] (1) and [Co(dps)₂(H₂O)₂]·(abs)₂(H₂O)₂ (2) (dps = 4, 4′-dipyridylsulfide, Habs = 4-amino benzenesulfonic acid) have been synthesized under similar conditions and characterized by elemental analysis, fluorescence spectra and single crystal X-ray diffraction. Compound 1 displays a dps-bridged 2D puckered, grid-like layer, which is further linked by C-H?Cl hydrogen bonds to form a 3D supramolecular architecture. Compound 2 shows a dps-bridged double-stranded chain structure, which is extended by N-H?O and O-H?O hydrogen bonds generating a 3D network. Solid-state fluorescence results reveal that both complexes can emit strong emission bands, at 467 nm and 518 nm for 1 and 344 nm for 2, respectively. Magnetic measurements show that there are weak antiferromagnetic interactions between the adjacent Co(II) ions in 2.     

Asymmetric ring opening of terminal epoxides via kinetic resolution catalyzed by new bimetallic chiral (salen)Co complexes

The highly enantioselective hydrolytic kinetic resolution (HKR) of racemic terminal epoxides by new bimetallic chiral (salen)Co provides a operationally very simple protocol for the synthesis of enantiomerically enriched terminal epoxides (>99% ee) and diols. Optically pure chlorohydrins have been synthesized in one step by ring‐opening reactions of terminal epoxides with HCl using kinetic resolution. © 2005 Wiley‐Liss, Inc. Chirality     

Selective recognition of thymidine homopolymer (poly T) oligonucleotide with cobalt(II)–4‐[(5‐chloro‐2‐pyridyl)azo]‐1,3‐diaminobenzene complex

The interactions of cobalt(II)–4‐[(5‐chloro‐2‐pyridyl)azo]‐1,3‐diaminobenzene (5‐Cl‐PADAB) complex with different kinds of homopolymer oligonucleotides in basic medium were investigated based on the measurements of resonance light scattering, UV–vis, circular dichroism spectra and dark field light‐scattering imaging. Experiments showed that only thymidine homopolymer (poly T) oligonucleotides with the length in the range of poly T₆ to poly T₁₈ could interact with the Co(II)–5‐Cl‐PADAB complex in alkaline conditions and cause evident color and spectral change. Thus, the binary complex of Co(II)–5‐Cl‐PADAB could be employed as a visual probe for selectively recognizing the poly T oligonucleotides. Copyright © 2009 John Wiley & Sons, Ltd.     

Enantioselective synthesis of (R)‐Cinacalcet via cobalt‐catalysed asymmetric Negishi cross‐coupling

A novel enantioselective synthesis of (R)‐cinacalcet with 99% enantiomeric excesses (ee) has been achieved. The main strategies of the approach include a gram‐scale cobalt‐catalysed asymmetric cross‐coupling of racemic ester with arylzinc reagent, Hoffman‐type rearrangement of acidamide, the amidation of chiral amine, and improving the ee of chiral amide from 87% to 99% via recrystallization.     

Pseudohalide-bridged five-coordinate Ni(II) or Co(II) complexes with bulky bidentate ligands: Magneto-structural correlationship

Bidentate ligands 2,2′-biquinoline (biq) and 6,6′-dimethyl-2,2′-bipyridine (dmbpy) with steric hindrance substituents cis to the nitrogen atoms have been used in the synthesis of transition metal complexes. Six new doubly end-on azido-bridged binuclear complexes [M₂(biq)₂(μ_1,1-N₃)₂(N₃)₂] (M = Ni (1), M = Co (2)), [M₂(biq)₂(μ_1,1-N₃)₂Cl₂] (M = Ni (3), M = Co (4)), [M₂(dmbpy)₂(μ_1,1-N₃)₂(N₃)₂] (M = Ni (5), M = Co (6)) and one end-to-end thiocyanato-bridged polymeric [Ni(dmbpy)(μ_1,3-SCN)(NCS)]_n (7) have been synthesized and characterized by single crystal X-ray diffraction analysis and magnetic studies. Complexes 1-6 comprise five-coordinate M(II) ions bridged by two end-on azide ligands. The bridging M-N-M bond angles are in the small range 104.1-105.2°. Complex 7 consists of a singly thiocyanate-bridged Ni(II) chain in which Ni(II) ions are five-coordinate. This research suggests that the bulky ligands play a key role in the formation of five-coordinate coordination structure. All complexes display intramolecular intermetallic ferromagnetic coupling with J_NiNi and J_CoCo of ca. 23 or 13 cm⁻¹ based on the Hamiltonian (S₁ = S₂ = 1 for Ni₂, or 3/2 for Co₂). The singly SCN⁻-bridged chainlike complex 7 shows intrachain ferromagnetic interaction with J = 3.96(2) cm⁻¹ and D = −4.55(8) cm⁻¹ (. Magneto-structural correlationship has been investigated.     

Flow‐injection chemiluminescent determination of estrogen benzoate using the tris(1,10‐phenanthroline) ruthenium(II)–permanganate system

Chemiluminescence (CL) detection for the determination of estrogen benzoate, using the reaction of tris(1,10–phenanthroline)ruthenium(II)–Na₂SO₃–permanganate, is described. This method is based on the CL reaction of estrogen benzoate (EB) with acidic potassium permanganate and tris(1,10–phenanthroline)ruthenium(II). The CL intensity is greatly enhanced when Na₂SO₃ is added. After optimization of the different experimental parameters, a calibration graph for estrogen benzoate is linear in the range 0.05–10 µg/mL. The 3 s limit of detection is 0.024 µg/mL and the relative standard deviation was 1.3% for 1.0 µg/mL estrogen benzoate (n = 11). This proposed method was successfully applied to commercial injection samples and emulsion cosmetics. The mechanism of CL reaction was also studied. Copyright © 2011 John Wiley & Sons, Ltd.     

Flow‐injection analysis for meloxicam based on tris(2,2′‐bipyridine) ruthenium(II)–Ce(IV) chemiluminescent system

It was found that meloxicam could enhance the chemiluminescence (CL) of the tris(2,2'‐bipyridine) ruthenium(II)–Ce(IV) system in the medium of sulfate acid. Based on this phenomenon a new flow‐injection system with chemiluminescent detection has been proposed for determination of meloxicam. Under optimum conditions, meloxicam had a good linear relationship with the CL intensity in the concentration range of 6.0  10^?4 to 1.0 µg/mL and the detection limit was 3.7 × 10^?4 µg/mL. The proposed method was applied to detect meloxicam in tablets and a satisfactory recovery was obtained. The possible mechanism for this CL system is also discussed in this paper. Copyright © 2009 John Wiley & Sons, Ltd.     

Imidazolate-bridged dicopper(II) and copper(II)–zinc(II) complexes of macrocyclic ligand with methylimidazol pendants: Model study of copper(II)–zinc(II) superoxide dismutase

Two new homo- and hetero-dinuclear complexes, [Cu₂L(im)](ClO₄)₃4H₂O (1) and [CuZnL(im)](ClO₄)₃4H₂O (2) (where Im=1H-1midazole and L = 3, 6, 9, 16, 19, 22-hexaaza-6, 19-bis(1H-imidazol-4-ylmethyl)tricycle[22, 2, 2, 2^11,14]triaconta-1, 11, 13, 24, 27, 29-hexaene) were synthesized and characterized as model compounds for the active site of copper(II)–zinc(II) superoxide dismutase (Cu₂Zn₂–SOD). X-ray crystal structure analysis revealed that the metal centers in both complexes exhibit distorted trigonal-bipyramid coordination geometry and the CuCu and CuZn distances are both 6.02 Å. Magnetic and ESR spectral measurements of 1 showed antiferromagnetic exchange interactions between the imidazolate-bridged Cu(II) ions. The ESR spectrum of 2 displays typical signals of mononuclear Cu(II) complex, demonstrating the formation of heterodinuclear complex 2 rather than a mixture of homodinuclear Cu(II)/Zn(II) complexes. pH-dependent ESR and UV–visible spectral measurements manifest that the imidazolate exists as a bridging ligand from pH 6 to 11 for both complexes. The IC₅₀ values of 1.96 and 1.57 μM [per Cu(II) ion] for 1 and 2 suggest that they are good models for the Cu₂Zn₂–SOD.