d‐lactic acid production from renewable lignocellulosic biomass via genetically modified Lactobacillus plantarum

d ‐lactic acid is of great interest because of increasing demand for biobased poly‐lactic acid (PLA). Blending poly‐l ‐lactic acid with poly‐d ‐lactic acid greatly improves PLA's mechanical and physical properties. Corn stover and sorghum stalks treated with 1% sodium hydroxide were investigated as possible substrates for d ‐lactic acid production by both sequential saccharification and fermentation and simultaneous saccharification and cofermentation (SSCF). A commercial cellulase (Cellic CTec2) was used for hydrolysis of lignocellulosic biomass and an l ‐lactate‐deficient mutant strain Lactobacillus plantarum NCIMB 8826 ldhL1 and its derivative harboring a xylose assimilation plasmid (ΔldhL1‐pCU‐PxylAB) were used for fermentation. The SSCF process demonstrated the advantage of avoiding feedback inhibition of released sugars from lignocellulosic biomass, thus significantly improving d ‐lactic acid yield and productivity. d ‐lactic acid (27.3 g L^?1) and productivity (0.75 g L^?1 h^?1) was obtained from corn stover and d ‐lactic acid (22.0 g L^?1) and productivity (0.65 g L^?1 h^?1) was obtained from sorghum stalks using ΔldhL1‐pCU‐PxylAB via the SSCF process. The recombinant strain produced a higher concentration of d ‐lactic acid than the mutant strain by using the xylose present in lignocellulosic biomass. Our findings demonstrate the potential of using renewable lignocellulosic biomass as an alternative to conventional feedstocks with metabolically engineered lactic acid bacteria to produce d ‐lactic acid. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:271–278, 2016     

Ethanolic fermentation of hydrolysates from ammonia fiber expansion (AFEX) treated corn stover and distillers grain without detoxification and external nutrient supplementation

External nutrient supplementation and detoxification of hydrolysate significantly increase the production cost of cellulosic ethanol. In this study, we investigated the feasibility of fermenting cellulosic hydrolysates without washing, detoxification or external nutrient supplementation using ethanologens Escherichia coli KO11 and the adapted strain ML01 at low initial cell density (16 mg dry weight/L). The cellulosic hydrolysates were derived from enzymatically digested ammonia fiber expansion (AFEX)-treated corn stover and dry distiller's grain and solubles (DDGS) at high solids loading (18% by weight). The adaptation was achieved through selective evolution of KO11 on hydrolysate from AFEX-treated corn stover. All cellulosic hydrolysates tested (36-52 g/L glucose) were fermentable. Regardless of strains, metabolic ethanol yields were near the theoretical limit (0.51 g ethanol/g consumed sugar). Volumetric ethanol productivity of 1.2 g/h/L was achieved in fermentation on DDGS hydrolysate and DDGS improved the fermentability of hydrolysate from corn stover. However, enzymatic hydrolysis and xylose utilization during fermentation were the bottlenecks for ethanol production from corn stover at these experimental conditions. In conclusion, fermentation under the baseline conditions was feasible. Utilization of nutrient-rich feedstocks such as DDGS in fermentation can replace expensive media supplementation.     

Polyurethane foam as an inert carrier for the production of L(+)-lactic acid by Lactobacillus casei under solid-state fermentation

AIM: Production of L-lactic acid in solid-state fermentation (SSF) using polyurethane foam (PUF) as inert support moistened with cassava bagasse starch hydrolysate. METHODS AND RESULTS: PUF impregnated with cassava bagasse starch hydrolysate as major carbon source was used for the production of L-lactic acid using Lactobacillus casei in solid-state condition. The key parameters such as reducing sugar, inoculum size and nutrient mixture were optimized by statistical approach using response surface methodology. More than 95% conversion of sugars to lactic acid from 4 g reducing sugar per gram dry support was attained after 72 h when the inert substrate was moistened with 6.5 ml of nutrient solution and inoculated with 1.5 x 10(9) CFU of L. casei. While considering the lactate yield based on the solid support used, a very high yield of 3.88 g lactic acid per gram PUF was achieved. CONCLUSION: PUF acted as an excellent inert support for L. casei and provided a platform for the utilization of starchy waste hydrolysate in a lower reactor volume. SIGNIFICANCE AND IMPACT OF THE STUDY: This is a cost effective cultivation of lactic acid bacteria for producing lactic acid from agro based waste products such as cassava bagasse. This is the first report on the exploitation of PUF as an inert support for lactate production under SSF.     

Simultaneous saccharification and fermentation of cellulose for lactic acid production

Lactic acid production from α-cellulose by simultaneous saccharification and fermentation (SSF) was studied. The cellulose was converted in a batch SSF using cellulase enzyme Cytolase CL to produce glucose sugar andLactobacillus delbrueckii to ferment the glucose to lactic acid. The effects of temperature, pH, yeast extract loading, and lactic acid inhibition were studied to determine the optimum conditions for the batch processing. Cellulose was converted efficiently to lactic acid, and enzymatic hydrolysis was the rate controlling step in the SSF. The highest conversion rate was obtained at 46°C and pH 5.0. The observed yield of lactic acid from α-cellulose was 0.90 at 72 hours. The optimum pH of the SSF was coincident with that of enzymatic hydrolysis. The optimum temperature of the SSF was chosen as the highest temperature the microorganism could withstand. The optimum yeast extract loading was found to be 2.5 g/L. Lactic acid was observed to be inhibitory to the microorganisms’ activity.     

Lactic acid production from agriculture residues

Various agriculture feedstock residues were evaluated for lactic acid production by simultaneous saccharification and fermentation (SSF) using Lactobacillus delbrueckii and Lactobacillus plantarum, without any additional nutrients. Lactic acid production was higher in alfalfa fiber and soya fiber compared to corncob (soft) and wheat straw. In Lactobacillus plantarum, the amount of lactic acid obtained from alfalfa fiber and soya fiber was 46 and 44 g/100 g fiber, respectively. However, in Lactobacillus delbrueckii, the lactic acid production in soya fiber was 44 g/100 g fiber and that of alfalfa was 32 g/100 g fiber. Small amounts of acetic acid were also produced from SSF of agricultural feedstocks residues. During SSF of alfalfa fiber, lactic acid production in both L. delbrueckii and L. plantarum was enhanced by adding pectinases and cellulases. Lactic acid production from alfalfa fiber did not change with increasing O₂ transfer rates in the fermentation medium, whereas acetic acid production in both Lactobacillus cultures increased with increasing O₂ transfer rates.     

Product inhibition in simultaneous saccharification and fermentation of cellulose into lactic acid

The product, lactic acid, strongly inhibited microbial activity in lactic acid fermentation. The volumetric productivity declined from 1.19 g/l.h with zero lactic acid (control) to only 0.18 g/l.h when lactic acid reached 65 g/l. Lactic acid also inhibited cellulase activity but less severely than the inhibition on microbial activity as lactic acid above 90 g/l was needed for 50% inhibition. A gradual deterioration of the Simultaneous Saccharification and Fermentation (SSF) process occurred with the build-up of lactic acid and the rate-controlling step in SSF shifted from hydrolysis to fermentation as the bioprocess proceeded.     

Microbial production of 2,3-butanediol from Jerusalem artichoke tubers by <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis>

2,3-Butanediol is one of the promising bulk chemicals with wide applications. Its fermentative production has attracted great interest due to the high end concentration. However, large-scale production of 2,3-butanediol requires low-cost substrate and efficient fermentation process. In the present study, 2,3-butanediol production by Klebsiella pneumoniae from Jerusalem artichoke tubers was successfully performed, and various technologies, including separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF), were investigated. The concentration of target products reached 81.59 and 91.63 g/l, respectively after 40 h in batch and fed-batch SSF processes. Comparing with fed-batch SHF, the fed-batch SSF provided 30.3% higher concentration and 83.2% higher productivity of target products. The results showed that Jerusalem artichoke tuber is a favorable substrate for 2,3-butanediol production, and the application of fed-batch SSF for its conversion can result in a more cost-effective process.     

米根霉发酵生产L-乳酸

报道了Ｌ－乳酸菌株的分离与筛选,探讨了不同碳源、氮源、通气量、温度等发酵条件对产Ｌ－乳酸的影响,从７８株米根霉中筛选出１３株产Ｌ－乳酸较高的菌株,其中米根霉（Ｒｈｉｚｏｐｕｓ ｏｒｙｚａｅ）Ｒｓ９２８产Ｌ－乳酸最高,产酸最稳定。试验结果表明,该菌株最适发酵培养组成（％）：淀粉水解糖１６,ＭｇＳＯ４ ０．０８,ＫＨ２ＰＯ４ ０．０５,ＺｎＳＯ４ ０．０１,ＣａＣＯ３ ７,ｐＨ自然。在６０ｔ发酵罐中,     

Conversion of acid hydrolysate of oil palm empty fruit bunch to L-lactic acid by newly isolated Bacillus coagulans JI12

Cost-effective conversion of lignocellulose hydrolysate to optically pure lactic acid is commercially attractive but very challenging. Bacillus coagulans JI12 was isolated from natural environment and used to produce L-lactic acid (optical purity?>?99.5 %) from lignocellulose sugars and acid hydrolysate of oil palm empty fruit bunch (EFB) at 50 °C and pH 6.0 without sterilization of the medium. In fed-batch fermentation with 85 g/L initial xylose and 55 g/L xylose added after 7.5 h, 137.5 g/L lactic acid was produced with a yield of 98 % and a productivity of 4.4 g/L?h. In batch fermentation of a sugar mixture containing 8.5 % xylose, 1 % glucose, and 1 % L-arabinose, the lactic acid yield and productivity reached 98 % and 4.8 g/L?h, respectively. When EFB hydrolysate was used, 59.2 g/L of lactic acid was produced within 9.5 h at a yield of 97 % and a productivity of 6.2 g/L?h, which are the highest among those ever reported from lignocellulose hydrolysates. These results indicate that B. coagulans JI12 is a promising strain for industrial production of L-lactic acid from lignocellulose hydrolysate.     

Production of biobutanol from acid-pretreated corncob using Clostridium beijerinckii TISTR 1461: Process optimization studies

Corncob is a potential feedstock in Thailand that can be used for fermentable sugar production through dilute sulfuric acid pretreatment and enzymatic hydrolysis. To recover high amounts of monomeric sugars from corncob, the sulfuric pretreatment conditions were optimized by using response surface methodology with three independent variables: sulfuric acid concentration, temperature, and time. The highest response of total sugars, 48.84 g/L, was found at 122.78°C, 4.65 min, and 2.82% (v/v) H₂SO₄. With these conditions, total sugars from the confirmation experiment were 46.29 g/L, with 5.51% error from the predicted value. The hydrolysate was used as a substrate for acetone–butanol–ethanol fermentation to evaluate its potential for microbial growth. The simultaneous saccharification and fermentation (SSF) showed that C. beijerinckii TISTR 1461 can generate acetone–butanol–ethanol products at 11.64 g/L (5.29 g/L acetone, 6.26 g/L butanol, and 0.09 g/L ethanol) instantly using sugars from the hydrolysed corncob with Novozymes 50013 cellulase enzyme without an overliming process.     

Ethanol production from wheat straw by recombinant Escherichia coli strain FBR5 at high solid loading

Ethanol production by a recombinant bacterium from wheat straw (WS) at high solid loading by separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF) was studied. The yield of total sugars from dilute acid pretreated WS (150 g/L) after enzymatic saccharification was 86.3 ± 1.5 g/L. The pretreated WS was bio-abated by growing a fungal strain aerobically in the liquid portion for 16 h. The recombinant Escherichia coli strain FBR5 produced 41.1 ± 1.1 g ethanol/L from non-abated WS hydrolyzate (total sugars, 86.6 ± 0.3 g/L) in 168 h at pH 7.0 and 35 °C. The bacterium produced 41.8 ± 0.0 g ethanol/L in 120 h from the bioabated WS by SHF. It produced 41.6 ± 0.7 g ethanol/L in 120 h from bioabated WS by fed-batch SSF. This is the first report of the production of above 4% ethanol from a lignocellulosic hydrolyzate by the recombinant bacterium.     

Production of D(-)-lactic acid from cellulose by simultaneous saccharification and fermentation using Lactobacillus coryniformis subsp. torquens

D(–)-Lactic acid was produced from cellulose by simultaneous saccharification and fermentation (SSF) in media containing cellulolytic enzymes and Lactobacillus coryniformis subsp. torquens ATCC 25600 at 39 °C and pH 5.4, yielding 0.89 g D(–)-lactic acid g^–1 cellulose at a mean volumetric productivity of 0.5 g l^–1 h^–1. No L(+)-lactic acid was found in the medium.     

Production of polymalic acid and malic acid by Aureobasidium pullulans fermentation and acid hydrolysis

Malic acid is a dicarboxylic acid widely used in the food industry and also a potential C4 platform chemical that can be produced from biomass. However, microbial fermentation for direct malic acid production is limited by low product yield, titer, and productivity due to end‐product inhibition. In this work, a novel process for malic acid production from polymalic acid (PMA) fermentation followed by acid hydrolysis was developed. First, a PMA‐producing Aureobasidium pullulans strain ZX‐10 was screened and isolated. This microbe produced PMA as the major fermentation product at a high‐titer equivalent to 87.6 g/L of malic acid and high‐productivity of 0.61 g/L h in free‐cell fermentation in a stirred‐tank bioreactor. Fed‐batch fermentations with cells immobilized in a fibrous‐bed bioreactor (FBB) achieved the highest product titer of 144.2 g/L and productivity of 0.74 g/L h. The fermentation produced PMA was purified by adsorption with IRA‐900 anion‐exchange resins, achieving a ～100% purity and a high recovery rate of 84%. Pure malic acid was then produced from PMA by hydrolysis with 2 M sulfuric acid at 85°C, which followed the first‐order reaction kinetics. This process provides an efficient and economical way for PMA and malic acid production, and is promising for industrial application. Biotechnol. Bioeng. 2013; 110: 2105–2113. © 2013 Wiley Periodicals, Inc.     

Lactic acid production from cellulosic waste by immobilized cells of Lactobacillus delbrueckii

Industrial waste corn cob residue (from xylose manufacturing) without pretreatment was hydrolyzed by cellulase and cellobiase. The cellulosic hydrolysate contained 52.4 g l⁻¹ of glucose and was used as carbon source for lactic acid fermentation by cells of Lactobacillus delbrueckii ZU-S2 immobilized in calcium alginate gel beads. The final concentration of lactic acid and the yield of lactic acid from glucose were 48.7 g l⁻¹ and 95.2%, respectively, which were comparative to the results of pure glucose fermentation. The immobilized cells were quite stable and reusable, and the average yield of lactic acid from glucose in the hydrolysate was 95.0% in 12 repeated batches of fermentation. The suitable dilution rate of continuous fermentation process was 0.13 h⁻¹, and the yield of lactic acid from glucose and the productivity were 92.4% and 5.746 g l⁻¹ h⁻¹, respectively. The production of lactic acid by simultaneous saccharification and fermentation (SSF) process was carried out in a coupling bioreactor, the final concentration of lactic acid was 55.6 g l⁻¹, the conversion efficiency of lactic acid from cellulose was 91.3% and the productivity was 0.927 g l⁻¹ h⁻¹. By using fed-batch technique in the SSF process, the final concentration of lactic acid and the productivity increased to 107.6 g l⁻¹ and 1.345 g l⁻¹ h⁻¹, respectively, while the dosage of cellulase per gram substrate decreased greatly. This research work should advance the bioconversion of renewable cellulosic resources and reduce environmental pollution.     

Highly efficient production of <Emphasis Type="SmallCaps">d</Emphasis>-lactic acid from chicory-derived inulin by <Emphasis Type="Italic">Lactobacillus bulgaricus</Emphasis>

Inulin is a readily available feedstock for cost-effective production of biochemicals. To date, several studies have explored the production of bioethanol, high-fructose syrup and fructooligosaccharide, but there are no studies regarding the production of d-lactic acid using inulin as a carbon source. In the present study, chicory-derived inulin was used for d-lactic acid biosynthesis by Lactobacillus bulgaricus CGMCC 1.6970. Compared with separate hydrolysis and fermentation processes, simultaneous saccharification and fermentation (SSF) has demonstrated the best performance of d-lactic acid production. Because it prevents fructose inhibition and promotes the complete hydrolysis of inulin, the highest d-lactic acid concentration (123.6 ± 0.9 g/L) with a yield of 97.9 % was obtained from 120 g/L inulin by SSF. Moreover, SSF by L. bulgaricus CGMCC 1.6970 offered another distinct advantage with respect to the higher optical purity of d-lactic acid (>99.9 %) and reduced number of residual sugars. The excellent performance of d-lactic acid production from inulin by SSF represents a high-yield method for d-lactic acid production from non-food grains.     

Assembly of mutations for improving thermostability of <Emphasis Type="Italic">Escherichia coli</Emphasis> AppA2 phytase

Conventional processes for lignocellulose-to-organic acid conversion requires pretreatment, enzymatic hydrolysis, and microbial fermentation. In this study, lime-treated wheat straw was hydrolyzed and fermented simultaneously to lactic acid by an enzyme preparation and Bacillus coagulans DSM 2314. Decrease in pH because of lactic acid formation was partially adjusted by automatic addition of the alkaline substrate. After 55 h of incubation, the polymeric glucan, xylan, and arabinan present in the lime-treated straw were hydrolyzed for 55%, 75%, and 80%, respectively. Lactic acid (40.7 g/l) indicated a fermentation efficiency of 81% and a chiral l(+)-lactic acid purity of 97.2%. In total, 711 g lactic acid was produced out of 2,706 g lime-treated straw, representing 43% of the overall theoretical maximum yield. Approximately half of the lactic acid produced was neutralized by fed-batch feeding of lime-treated straw, whereas the remaining half was neutralized during the batch phase with a Ca(OH)₂ suspension. Of the lime added during the pretreatment of straw, 61% was used for the neutralization of lactic acid. This is the first demonstration of a process having a combined alkaline pretreatment of lignocellulosic biomass and pH control in fermentation resulting in a significant saving of lime consumption and avoiding the necessity to recycle lime.     

Direct fermentation of potato starch in wastewater to lactic acid by<Emphasis Type="Italic">Rhizopus oryzae</Emphasis>

The fungal species ofRhizopus oryzae 2062 has the capacity to carry out a single stage fermentation process for lactic acid production from potato starch wastewater. Starch hydrolysis, reducing sugar accumulation, biomass formation, and lactic acid production were affected with variations in pH, temperature, and starch source and concentration. A growth condition with starch concentration approximately 20 g/L at pH 6.0 and 30°C was favourable for starch fermentation, resulting in a lactic acid yield of 78.3%–85.5% associated with 1.5–2.0 g/L fungal biomass produced in 36 h of fermentation.     

Enhanced production of l‐lactic acid by Lactobacillus thermophilus SRZ50 mutant generated by high‐linear energy transfer heavy ion mutagenesis

The aim of this study was to improve l ‐lactic acid production of Lactobacillus thermophilus SRZ50. For this purpose, high efficient heavy‐ion mutagenesis technique was performed using SRZ50 as the original strain. To enhance the screening efficiency for high yield l ‐lactic acid producers, a scale‐down from shake flask to microtiter plate was developed. The results showed that 24‐well U‐bottom MTPs could well alternate shake flasks for L. thermophilus cultivation as a scale‐down tool due to its a very good comparability to the shake flasks. Based on this microtiter plate screening method, two high l ‐lactic acid productivity mutants, A59 and A69, were successfully screened out, which presented, respectively, 15.8 and 16.2% higher productivities than that of the original strain. Based on fed‐batch fermentation, the A69 mutant can accumulate 114.2 g/L l ‐lactic acid at 96 h. Hence, the proposed traditional microbial breeding method with efficient high‐throughput screening assay was proved to be an appropriate strategy to obtain lactic acid‐overproducing strain.     

Caffeic acid production by simultaneous saccharification and fermentation of kraft pulp using recombinant Escherichia coli

Caffeic acid (3,4-dihydroxycinnamic acid) serves as a building block for thermoplastics and a precursor for biologically active compounds and was recently produced from glucose by microbial fermentation. To produce caffeic acid from inedible cellulose, separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF) reactions were compared using kraft pulp as lignocellulosic feedstock. Here, a tyrosine-overproducing Escherichia coli strain was metabolically engineered to produce caffeic acid from glucose by introducing the genes encoding a 4-hydroxyphenyllactate 3-hydroxylase (hpaBC) from Pseudomonas aeruginosa and tyrosine ammonia lyase (fevV) from Streptomyces sp. WK-5344. Using the resulting recombinant strain, the maximum yield of caffeic acid in SSF (233 mg/L) far exceeded that by SHF (37.9 mg/L). In the SSF with low cellulase loads (≤2.5 filter paper unit/g glucan), caffeic acid production was markedly increased, while almost no glucose accumulation was detected, indicating that the E. coli cells experienced glucose limitation in this culture condition. Caffeic acid yield was also negatively correlated with the glucose concentration in the fermentation medium. In SHF, the formation of by-product acetate and the accumulation of potential fermentation inhibitors increased significantly with kraft pulp hydrolysate than filter paper hydrolysate. The combination of these inhibitors had synergistic effects on caffeic acid fermentation at low concentrations. With lower loads of cellulase in SSF, less potential fermentation inhibitors (furfural, 5-hydroxymethyfurfural, and 4-hydroxylbenzoic acid) accumulated in the medium. These observations suggest that glucose limitation in SSF is crucial for improving caffeic acid yield, owing to reduced by-product formation and fermentation inhibitor accumulation.