Supramolecular chirality transfer in a stereodynamic catalysts

We present rhodium catalysts that contain stereodynamic axially chiral biphenol‐derived phosphinite ligands modified with non‐stereoselective amides for non‐covalent interactions. A chirality transfer was achieved with (R)‐ or (S)‐acetylphenylalanine methyl amide, and the interaction mechanism was investigated by NMR measurements. These interactions at the non‐stereoselective interaction sites and the formation of supramolecular complexes result in an enrichment of either the (R_ax)‐ or (S_ax) enantiomer of the tropos catalysts, which in turn provide the (R)‐ or (S)‐acetylphenylalanine methyl ester in the hydrogenation of (Z)‐methyl‐α‐acetamidocinnamate.     

A stereodynamic phosphoramidite ligand derived from 3,3′‐functionalized ortho‐biphenol and its rhodium(I) complex

Stereodynamic ligands and complexes bearing functional groups to attach chiral or achiral binding sites and auxiliaries are highly attractive due to the interesting opportunities for controlling the stereochemical outcome of enantioselective transformations. In this study we report the preparation of a 3,3′‐functionalized biphenol (BIPOL) phosphoramidite ligand (P_Am) bearing 3,5‐dichlorobenzoyl (3,5‐DCB) amide binding sites for noncovalent interactions. Upon coordination to [Rh(COD)₂]BF₄ this substitution pattern directs one of the 3,5‐DCB binding sites in close proximity of the metal center resulting in liberation of both COD ligands and the formation of a [Rh(P_Am)₂]BF₄ complex. Coordination of the amide carbonyl unit was found to be reversible, since the complex acted as an active catalyst in the hydrogenation of dehydroamino acid derivatives. X‐ray crystallographic investigation revealed that the second 3,5‐DCB unit is capable of forming noncovalent π–π interactions connecting both phosphoramidite ligands.     

Synthesis of l‐threitol‐based crown ethers and their application as enantioselective phase transfer catalyst in Michael additions

A few new l ‐threitol‐based lariat ethers incorporating a monoaza‐15‐crown‐5 unit were synthesized starting from diethyl l ‐tartrate. These macrocycles were used as phase transfer catalysts in asymmetric Michael addition reactions under mild conditions to afford the adducts in a few cases in good to excellent enantioselectivities. The addition of 2‐nitropropane to trans ‐chalcone, and the reaction of diethyl acetamidomalonate with β‐nitrostyrene resulted in the chiral Michael adducts in good enantioselectivities (90% and 95%, respectively). The substituents of chalcone had a significant impact on the yield and enantioselectivity in the reaction of diethyl acetoxymalonate. The highest enantiomeric excess (ee ) values (99% ee ) were measured in the case of 4‐chloro‐ and 4‐methoxychalcone. The phase transfer catalyzed cyclopropanation reaction of chalcone and benzylidene‐malononitriles using diethyl bromomalonate as the nucleophile (MIRC reaction) was also developed. The corresponding chiral cyclopropane diesters were obtained in moderate to good (up to 99%) enantioselectivities in the presence of the threitol‐based crown ethers.     

(S)‐6‐Bromo‐BINOL‐based phosphoramidite ligand with C1 symmetry for enantioselective hydrogenation and allylic substitution

(S)‐6‐Br‐BINOL‐derived phosphoramidite, a s imple monodentate ligand with a stereogenic center at the phosphorus atom, was synthesized for the first time. This stereoselector generated a high level of enantioselectivity (80–95% ee) in the rhodium‐catalyzed hydrogenation of α‐dehydrocarboxylic acid esters and was also successfully employed in the asymmetric palladium‐catalyzed allylic substitution of (E)‐1,3‐diphenylallyl acetate. The optical yield also showed significant dependence with reaction type: up to 70% ee for allylic amination, up to 75% ee for allylic sulfonylation, and up to 90% ee for allylic alkylation. Chirality, 2010. © 2010 Wiley‐Liss, Inc.     

Room temperature and highly enantioselective additions of alkyltitanium reagents to aldehydes catalyzed by a titanium catalyst of (R)‐h8‐binol

Three alkyltitanium reagents of RTi(O‐i‐Pr)₃ (R = Cy ( 1a ), i‐Bu ( 1b ), and n‐Bu ( 1c )) were prepared in good yields. The high‐resolution mass spectroscopy showed that 1b and 1 c in the gas phase are monomeric species. However, the solid state of 1a revealed a dimeric structure. Asymmetric additions of 1a , 1b , 1c to aldehydes catalyzed by a titanium catalyst of (R)‐H₈‐BINOL were studied at room temperature. The reactions produced desired secondary alcohols in good yields with good to excellent enantioselectivities of up to 94% ee. Reactivity and enantioselectivity differences, in terms of steric bulkiness of the R nucleophiles, are herein described. The addition reactions of secondary c‐hexyl to aldehydes were slower than the reactions of primary i‐butyl or n‐butyl nucleophiles. For the primary alkyls, lower enantioselectivities were obtained for products from addition reactions of the linear n‐butyl as compared with the enantioselectivities of products from the addition reactions of the branched i‐butyl group. The same stereochemistry of RTi(O‐i‐Pr)₃ addition reactions as the addition reactions of organozinc, organoaluminum, Grignard, or organolithium reagents directly supports the argument of that titanium‐catalyzed addition reactions of aldehydes involve an addition of an organotitanium nucleophile. Chirality, 2011. © 2011 Wiley‐Liss, Inc.     

Synthesis of d‐mannitol‐based crown ethers and their application as catalyst in asymmetric phase transfer reactions

A few new d ‐mannitol‐based monoaza‐15‐crown‐5 type chiral lariat ethers and 18‐crown‐6 type macrocycles were synthesized. These crown compounds were used as phase transfer catalysts in asymmetric Michael addititons and in a Darzens condensation under mild conditions to afford the corresponding products in a few cases in good to excellent enantioselectivities. In the Michael addition of diethyl acetoxymalonate to trans‐chalcone, in the addition of diethyl acetamidomalonate to ß‐nitrostyrene, in the reaction of diethyl bromomalonate with benzylidene malononitriles, in the cyclopropanation reaction of diethyl bromomalonate and 2‐benzylidene‐1,3‐indandione, and in the Darzens condensation of α‐chloroacetophenone with benzaldehyde, maximum enantioselectivities of 39%, 65%, 99%, 56%, and 62%, respectively, were obtained in the presence of the d ‐mannitol‐based macrocycles as the catalysts.     

Enantioselective Addition of Diethylzinc to Aldehydes Catalyzed by Chiral O,N,O‐tridentate Phenol Ligands Derived From Camphor

Chiral O,N,O‐tridentate phenol ligands bearing a camphor backbone were found to be effective chiral catalysts for the enantioselective addition of diethylzinc to aromatic aldehydes, resulting in high enantioselectivities (80–95% ee) at room temperature. Chirality 28:65–71, 2016. © 2015 Wiley Periodicals, Inc.     

Design and synthesis of new alkyl‐based chiral phosphoric acid catalysts

Using chiral BINOL‐derived phosphoric acids (PA's) to activate substrates for enhanced reactivity is now regarded as a powerful strategy to control enantioselectivity in asymmetric synthesis. Generally, most substituents at the 3,3′‐positions of BINOL PA's are aryl derivatives. These derivatives are pivotal in attaining high selectivity. PA's with alkyl substituents in these positions have rarely been reported. Herein, we introduced alkyl‐based substituents at the 3,3′‐position of PA's. These new potential catalysts, if applied in reactions, may allow altered noncovalent interactions (as opposed to the typical aryl substituents in these positions) with substrates used in chiral PA‐catalyzed chemistry in the future.     

Structural Features and Asymmetric Environment of i‐Pr‐SPRIX Ligand

Novel chiral diisopropyl spiro bis(isoxazoline) ligands, anti‐i‐Pr‐SPRIX and syn‐i‐Pr‐SPRIX, were designed and synthesized. Their catalytic utility, X‐ray crystallographic analyses, and complexation studies demonstrated the structural features of tetraisopropyl spiro bis(isoxazoline) ligand, i‐Pr‐SPRIX, which is a prominent ligand in various enantioselective Pd catalytic processes: All i‐Pr groups work in collaboration to create an effective asymmetric environment. Chirality 27:532–537, 2015. © 2015 Wiley Periodicals, Inc.     

Effect of the substrate and catalyst chirality on the diastereoselective epoxidation of limonene using Jacobsen‐type catalysts

Chiral and achiral Jacobsen's catalysts in their homogeneous form or immobilized on Al‐MCM‐41 exhibit similar catalytic activity during diastereoselective epoxidation of limonene when in situ generated dimethyldioxirane is used as oxidizing agent. Experimental observations suggest that not only the catalyst chiral center but also the substrate chiral center participates in the preferential formation of most diastereomers. Remarkable turnover numbers (TON), up to 288, was achieved over the heterogeneous catalysts in comparison to their homogeneous counterparts (TON up to 46). Catalyst leaching rather than catalyst oxidative degradation was identified as the main source of catalyst deactivation during reutilization tests. Chirality, 2010. © 2009 Wiley‐Liss, Inc.     

Biocatalytic synthesis of C3 chiral building blocks by chloroperoxidase‐catalyzed enantioselective halo‐hydroxylation and epoxidation in the presence of ionic liquids

The optically active C3 synthetic blocks are remarkably versatile intermediates for the synthesis of numerous pharmaceuticals and agrochemicals. This work provides a simple and efficient enzymatic synthetic route for the environment‐friendly synthesis of C3 chiral building blocks. Chloroperoxidase (CPO)‐catalyzed enantioselective halo‐hydroxylation and epoxidation of chloropropene and allyl alcohol was employed to prepare C3 chiral building blocks in this work, including (R)‐2,3‐dichloro‐1‐propanol (DCP*), (R)‐2,3‐epoxy‐1‐propanol (GLD*), and (R)‐3‐chloro‐1‐2‐propanediol (CPD*). The ee values of the formed C3 chiral building blocks DCP*, CPD*, and glycidol were 98.1, 97.5, and 96.7%, respectively. Moreover, the use of small amount of imidazolium ionic liquid enhanced the yield efficiently due to the increase of solubility of hydrophobic organic substrates in aqueous reaction media, as well as the improvement of affinity and selectivity of CPO to substrate. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:724–729, 2015     

The asymmetric synthesis of (R,R)‐formoterol via transfer hydrogenation with polyethylene glycol bound Rh catalyst in PEG2000 and water

(R,R)‐formoterol was synthesized in seven steps with 4‐hydroxyl‐3‐nitro‐acetophenone as the starting material. The key intermediate, the chiral secondary alcohol 4 , was prepared via Rh‐catalyzed asymmetric transfer hydrogenation with (S,S)‐PEGBsDPEN as the ligand and sodium formate as the hydrogen donor under mild conditions. With a mixture of PEG 2000 and water as the reaction media, the catalyst system could be recycled four times. Chirality, 2010. © 2009 Wiley‐Liss, Inc.     

Structure‐based engineering of streptavidin monomer with a reduced biotin dissociation rate

We recently reported the engineering of monomeric streptavidin, mSA, corresponding to one subunit of wild type (wt) streptavidin tetramer. The monomer was designed by homology modeling, in which the streptavidin and rhizavidin sequences were combined to engineer a high affinity binding pocket containing residues from a single subunit only. Although mSA is stable and binds biotin with nanomolar affinity, its fast off rate (k_off) creates practical challenges during applications. We obtained a 1.9 Å crystal structure of mSA bound to biotin to understand their interaction in detail, and used the structure to introduce targeted mutations to improve its binding kinetics. To this end, we compared mSA to shwanavidin, which contains a hydrophobic lid containing F43 in the binding pocket and binds biotin tightly. However, the T48F mutation in mSA, which introduces a comparable hydrophobic lid, only resulted in a modest 20–40% improvement in the measured k_off. On the other hand, introducing the S25H mutation near the bicyclic ring of bound biotin increased the dissociation half life (t_½) from 11 to 83 min at 20°C. Molecular dynamics (MD) simulations suggest that H25 stabilizes the binding loop L3,4 by interacting with A47, and protects key intermolecular hydrogen bonds by limiting solvent entry into the binding pocket. Concurrent T48F or T48W mutation clashes with H25 and partially abrogates the beneficial effects of H25. Taken together, this study suggests that stabilization of the binding loop and solvation of the binding pocket are important determinants of the dissociation kinetics in mSA. Proteins 2013. © 2013 Wiley Periodicals, Inc.     

Green synthesis of enantiopure (S)‐1‐(benzofuran‐2‐yl)ethanol by whole‐cell biocatalyst

Optically active aromatic alcohols are valuable chiral building blocks of many natural products and chiral drugs. Lactobacillus paracasei BD87E6, which was isolated from a cereal‐based fermented beverage, was shown as a biocatalyst for the bioreduction of 1‐(benzofuran‐2‐yl) ethanone to (S)‐1‐(benzofuran‐2‐yl) ethanol with highly stereoselectivity. The bioreduction conditions were optimized using L. paracasei BD87E6 to obtain high enantiomeric excess (ee) and conversion. After optimization of the bioreduction conditions, it was shown that the bioreduction of 1‐(benzofuran‐2‐yl)ethanone was performed in mild reaction conditions. The asymmetric bioreduction of the 1‐(benzofuran‐2‐yl)ethanone had reached 92% yield with ee of higher than 99.9% at 6.73 g of substrate. Our study gave the first example for enantiopure production of (S)‐1‐(benzofuran‐2‐yl)ethanol by a biological green method. This process is also scalable and has potential in application. In this study, a basic and novel whole‐cell mediated biocatalytic method was performed for the enantiopure production of (S)‐1‐(benzofuran‐2‐yl)ethanol in the aqueous medium, which empowered the synthesis of a precious chiral intermediary process to be converted into a sophisticated molecule for drug production.     

Studies of Asymmetric Styrene Cyclopropanation with a Rhodium(II) Metallopeptide Catalyst Developed with a High‐Throughput Screen

Dirhodium metallopeptides have been developed as selective catalysts for asymmetric cyclopropanation reactions. A selective ligand sequence has been identified by screening on‐bead metallopeptide libraries in a 96‐well plate format. Efficient ligand synthesis and screening allows a 200‐member library to be created and assayed in less than three weeks. These metallopeptides catalyze efficient cyclopropanation of aryldiazoacetates, providing asymmetric access to cyclopropane products in high diastereoselectivity. Chirality 25:493–497, 2013. © 2013 Wiley Periodicals, Inc.     

Bidirectional solid phase synthesis of a model oligoglycine bolaamphiphile and purification by rapid self‐assembly

We utilised a simple bidirectional (N→C and C→N) solid phase synthesis strategy entailing conventional solid phase peptide synthesis and fragment condensation with a water‐soluble carbodiimide to synthesise a model anionic glycylglycine bolaamphiphile containing a suberic acid linker moiety, namely N,N′‐suberoyldiglycylglycine. The synthetic suberoyldiglycylglycine was purified using its inherent ability to rapidly self‐assemble in an aqueous acidic solution (0.1% trifluoroacetic acid). Monitoring of the rapid assembly process corroborated our visual observation and confirmed packing‐directed self‐assembly rather than non‐specific aggregation or precipitation. The progress of suberoyldiglycylglycine self‐assembly was observed to be via the formation of oligomers in the solution, which then self‐assembled to form layered β‐sheet type macrostructures. Within 24 h, nanotubes grew from these macrostructures and eventually combined to formed microtubes, which we isolated after 5–7 days. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Borane‐mediated asymmetric reduction of acetophenone by enantiopure aminonaphthols and aminoalcohols as catalytic source

Practical, cheap, and stereoselective synthetic methods were applied to the preparation of novel 1‐(aminoalkyl)naphthol and γ‐aminoalcohol tridentate ligands. The ligands obtained were conveniently applied with good results as catalytic sources in the borane‐mediated enantioselective reduction of acetophenone with borane dimethylsulfide. Conformational analysis through molecular modeling allows the rationalization of observed stereochemical outcomes. Chirality 2010. © 2009 Wiley‐Liss, Inc.     

Design,synthesis and application of benzyl‐sulfonate biomimetic affinity adsorbents for monoclonal antibody purification from transgenic corn

The human anti‐human immunodeficiency virus (HIV) antibody 2G12 (mAb 2G12) is one of the most broadly neutralizing antibodies against HIV that recognizes a unique epitope on the surface glycoprotein gp120. In the present work, a limited affinity‐ligand library was synthesized and evaluated for its ability to bind and purify recombinant mAb 2G12 expressed in transgenic corn. The affinity ligands were structural fragments of polysulfonate triazine dye Cibacron Blue 3GA (CB3GA) and represent novel lead scaffolds for designing synthetic affinity ligands. Solid phase chemistry was used to synthesize variants of CB3GA lead ligand. One immobilized ligand, bearing 4‐aminobenzyl sulfonic acid (4ABS) linked on two chlorine atoms of the triazine ring (4ABS‐Trz‐4ABS), displayed high affinity for mAb 2G12. Absorption equilibrium, 3D molecular modelling and molecular dynamics simulation studies were carried out to provide a detailed picture of the 4ABS‐Trz‐4ABS interaction with mAb 2G12. This biomimetic affinity ligand was exploited for the development of a facile two‐step purification protocol for mAb 2G12. In the first step of the procedure, mAb 2G12 was purified on an S‐Sepharose FF cation exchanger, and in the second step, mAb 2G12 was purified using affinity chromatography on 4ABS‐Trz‐4ABS affinity adsorbent. Analysis of the antibody preparation by sodium dodecyl sulfate‐polyacrylamide gel electrophoresis and enzyme‐linked immunosorbent assay showed that the mAb 2G12 was fully active and of sufficient purity suitable for analytical applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of Novel Diselenide‐Linked Porphyrin Dimers under Phase‐Transfer Catalysis Condition and Their Interactions with DNA

Novel diselenide‐linked porphyrin dimers were synthesized under phase‐transfer catalysis conditions. The targeted compounds were characterized by ¹H‐NMR, high‐resolution mass spectrometry, UV/VIS and fluorescence spectroscopies, redox‐potential measurements, and elemental analysis. The interaction of the title compounds with DNA was studied using UV/VIS, fluorescence, and circular dichroism (CD) spectroscopies. The relative rates of singlet‐oxygen production from the diselenide‐linked porphyrin dimers upon photoirradiation were also measured.