High‐yield lipid production from lignocellulosic biomass using engineered xylose‐utilizing Yarrowia lipolytica

Lignocellulosic biomass shows high potential as a renewable feedstock for use in biodiesel production via microbial fermentation. Yarrowia lipolytica, an emerging oleaginous yeast, has been engineered to efficiently convert xylose, the second most abundant sugar in lignocellulosic biomass, into lipids for lignocellulosic biodiesel production. Yet, the lipid yield from xylose or lignocellulosic biomass remains far lower than that from glucose. Here we developed an efficient xylose‐utilizing Y. lipolytica strain, expressing an isomerase‐based pathway, to achieve high‐yield lipid production from lignocellulosic biomass. The newly developed xylose‐utilizing Y. lipolytica, YSXID, produced 12.01 g/L lipids with a maximum yield of 0.16 g/g, the highest ever reported, from lignocellulosic hydrolysates. Consequently, this study shows the potential of isomerase‐based xylose‐utilizing Y. lipolytica for economical and sustainable production of biodiesel and oleochemicals from lignocellulosic biomass.     

Succinate production from xylose‐glucose mixtures using a consortium of engineered Escherichia coli

The conversion of variable sugar mixtures into biochemicals poses a challenge for a single microorganism. For example, succinate has not been effectively generated from mixtures of glucose and xylose. In this work, a consortium of two Escherichia coli strains converted xylose and glucose to succinate in a dual phase aerobic/anaerobic process. First, the optimal pathway from xylose or glucose to succinate was determined by expressing either heterologous pyruvate carboxylase or heterologous adenosine triphosphate‐forming phosphoenol pyruvate (PEP) carboxykinase. Expression of PEP carboxykinase (pck) resulted in higher yield (0.86 g/g) and specific productivity (155 mg/gh) for xylose conversion, while expression of pyruvate carboxylase (pyc) resulted in higher productivity (76 mg/gh) for glucose conversion. Then, processes using consortia of the two optimal xylose‐selective and glucose‐selective strains were designed for two different feed ratios of glucose/xylose. In each case the consortia generated over 40 g/L succinate efficiently with yields greater than 0.90 g succinate/g total sugar. This study demonstrates two advantages of microbial consortia for the conversion of sugar mixtures: each sugar‐to‐product pathway can be optimized independently, and the volumetric consumption rate for each sugar can be controlled independently, for example, by altering the biomass concentration of each consortium member strain.     

Conversion of glucose‐xylose mixtures to pyruvate using a consortium of metabolically engineered Escherichia coli

Two strains of Escherichia coli were engineered to accumulate pyruvic acid from two sugars found in lignocellulosic hydrolysates by knockouts in the aceE, ppsA, poxB, and ldhA genes. Additionally, since glucose and xylose are typically consumed sequentially due to carbon catabolite repression in E. coli, one strain (MEC590) was engineered to grow only on glucose while a second strain (MEC589) grew only on xylose. On a single substrate, each strain generated pyruvate at a yield of about 0.60 g/g in both continuous culture and batch culture. In a glucose‐xylose mixture under continuous culture, a consortium of both strains maintained a pyruvate yield greater than 0.60 g/g when three different concentrations of glucose and xylose were sequentially fed into the system. In a fed‐batch process, both sugars in a glucose‐xylose mixture were consumed simultaneously to accumulate 39 g/L pyruvate in less than 24 h at a yield of 0.59 g/g.     

A strain of <Emphasis Type="Italic">Meyerozyma guilliermondii</Emphasis> isolated from sugarcane juice is able to grow and ferment pentoses in synthetic and bagasse hydrolysate media

The search for new microbial strains that are able to withstand inhibitors released from hemicellulosic hydrolysis and are also still able to convert sugars in ethanol/xylitol is highly desirable. A yeast strain isolated from sugarcane juice and identified as Meyerozyma guilliermondii was evaluated for the ability to grow and ferment pentoses in synthetic media and in sugarcane bagasse hydrolysate. The yeast grew in xylose, arabinose and glucose at the same rate at an initial medium pH of 5.5. At pH 4.5, the yeast grew more slowly in arabinose. There was no sugar exhaustion within 60 h. At higher xylose concentrations with a higher initial cell concentration, sugar was exhausted within 96 h at pH 4.5. An increase of 350 % in biomass was obtained in detoxified hydrolysates, whereas supplementation with 3 g/L yeast extract increased biomass production by approximately 40 %. Ethanol and xylitol were produced more significantly in supplemented hydrolysates regardless of detoxification. Xylose consumption was enhanced in supplemented hydrolysates and arabinose was consumed only when xylose and glucose were no longer available. Supplementation had a greater impact on ethanol yield and productivity than detoxification; however, the product yields obtained in the present study are still much lower when compared to other yeast species in bagasse hydrolysate. By the other hand, the fermentation of both xylose and arabinose and capability of withstanding inhibitors are important characteristics of the strain assayed.     

Alkali‐based AFEX pretreatment for the conversion of sugarcane bagasse and cane leaf residues to ethanol

Sugarcane is one of the major agricultural crops cultivated in tropical climate regions of the world. Each tonne of raw cane production is associated with the generation of 130 kg dry weight of bagasse after juice extraction and 250 kg dry weight of cane leaf residue postharvest. The annual world production of sugarcane is ～1.6 billion tones, generating 279 MMT tones of biomass residues (bagasse and cane leaf matter) that would be available for cellulosic ethanol production. Here, we investigated the production of cellulosic ethanol from sugar cane bagasse and sugar cane leaf residue using an alkaline pretreatment: ammonia fiber expansion (AFEX). The AFEX pretreatment improved the accessibility of cellulose and hemicelluloses to enzymes during hydrolysis by breaking down the ester linkages and other lignin carbohydrate complex (LCC) bonds and the sugar produced by this process is found to be highly fermentable. The maximum glucan conversion of AFEX pretreated bagasse and cane leaf residue by cellulases was ～85%. Supplementation with hemicellulases during enzymatic hydrolysis improved the xylan conversion up to 95–98%. Xylanase supplementation also contributed to a marginal improvement in the glucan conversion. AFEX‐treated cane leaf residue was found to have a greater enzymatic digestibility compared to AFEX‐treated bagasse. Co‐fermentation of glucose and xylose, produced from high solid loading (6% glucan) hydrolysis of AFEX‐treated bagasse and cane leaf residue, using the recombinant Saccharomyces cerevisiae (424A LNH‐ST) produced 34–36 g/L of ethanol with 92% theoretical yield. These results demonstrate that AFEX pretreatment is a viable process for conversion of bagasse and cane leaf residue into cellulosic ethanol. Biotechnol. Bioeng. 2010;107: 441–450. © 2010 Wiley Periodicals, Inc.     

A genome shuffling-generated <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> isolate that ferments xylose and glucose to produce high levels of ethanol

Genome shuffling is an efficient approach for the rapid improvement of industrially important microbial phenotypes. This report describes optimized conditions for protoplast preparation, regeneration, inactivation, and fusion using the Saccharomyces cerevisiae W5 strain. Ethanol production was confirmed by TTC (triphenyl tetrazolium chloride) screening and high-performance liquid chromatography (HPLC). A genetically stable, high ethanol-producing strain that fermented xylose and glucose was obtained following three rounds of genome shuffling. After fermentation for 84 h, the high ethanol-producing S. cerevisiae GS3-10 strain (which utilized 69.48 and 100% of the xylose and glucose stores, respectively) produced 26.65 g/L ethanol, i.e., 47.08% higher than ethanol production by S. cerevisiae W5 (18.12 g/L). The utilization ratios of xylose and glucose were 69.48 and 100%, compared to 14.83 and 100% for W5, respectively. The ethanol yield was 0.40 g/g (ethanol/consumed glucose and xylose), i.e., 17.65% higher than the yield by S. cerevisiae W5 (0.34 g/g).     

Metabolism of glucose and xylose as single and mixed feed in <Emphasis Type="Italic">Debaryomyces nepalensis</Emphasis> NCYC 3413: production of industrially important metabolites

Efficient conversion of hexose and pentose (glucose and xylose) by a single strain is a very important factor for the production of industrially important metabolites using lignocellulose as the substrate. The kinetics of growth and polyol production by Debaryomyces nepalensis NCYC 3413 was studied under single and mixed substrate conditions. In the presence of glucose, the strain produced ethanol (35.8 ± 2.3 g/l), glycerol (9.0 ± 0.2 g/l), and arabitol (6.3 ± 0.2 g/l). In the presence of xylose, the strain produced xylitol (38 ± 1.8 g/l) and glycerol (18 ± 1.0 g/l) as major metabolites. Diauxic growth was observed when the strain was grown with different combinations of glucose/xylose, and glucose was the preferred substrate. The presence of glucose enhanced the conversion of xylose to xylitol. By feeding a mixture of glucose at 100 g/l and xylose at 100 g/l, it was found that the strain produced a maximum of 72 ± 3 g/l of xylitol. A study of important enzymes involved in the synthesis of xylitol (xylose reductase (XR) and xylitol dehydrogenase (XDH)), glycerol (glycerol-3-phosphate dehydrogenase (G3PDH)) and ethanol (alcohol dehydrogenase (ADH)) in cells grown in the presence of glucose and xylose revealed high specific activity of G3PDH and ADH in cells grown in the presence of glucose, whereas high specific activity of XR, XDH, and G3PDH was observed in cells grown in the presence of xylose. To our knowledge, this is the first study to elaborate the glucose and xylose metabolic pathway in this yeast strain.     

Improved bioconversion of lignocellulosic biomass by Saccharomyces cerevisiae engineered for tolerance to acetic acid

Lignocellulosic biomass has considerable potential for the production of fuels and chemicals as a promising alternative to conventional fossil fuels. However, the bioconversion of lignocellulosic biomass to desired products must be improved to reach economic viability. One of the main technical hurdles is the presence of inhibitors in biomass hydrolysates, which hampers the bioconversion efficiency by biorefinery microbial platforms such as Saccharomyces cerevisiae in terms of both production yields and rates. In particular, acetic acid, a major inhibitor derived from lignocellulosic biomass, severely restrains the performance of engineered xylose‐utilizing S. cerevisiae strains, resulting in decreased cell growth, xylose utilization rate, and product yield. In this study, the robustness of XUSE, one of the best xylose‐utilizing strains, was improved for the efficient conversion of lignocellulosic biomass into bioethanol under the inhibitory condition of acetic acid stress. Through adaptive laboratory evolution, we successfully developed the evolved strain XUSAE57, which efficiently converted xylose to ethanol with high yields of 0.43–0.50 g ethanol/g xylose even under 2–5 g/L of acetic stress. XUSAE57 not only achieved twofold higher ethanol yields but also improved the xylose utilization rate by more than twofold compared to those of XUSE in the presence of 4 g/L of acetic acid. During fermentation of lignocellulosic hydrolysate, XUSAE57 simultaneously converted glucose and xylose with the highest ethanol yield reported to date (0.49 g ethanol/g sugars). This study demonstrates that the bioconversion of lignocellulosic biomass by an engineered strain could be significantly improved through adaptive laboratory evolution for acetate tolerance, which could help realize the development of an economically feasible lignocellulosic biorefinery to produce fuels and chemicals.     

Production of ethanol from corn stover hemicellulose hydrolyzate using <Emphasis Type="Italic">Pichia stipitis</Emphasis>

Hemicellulose liquid hydrolyzate from dilute acid pretreated corn stover was fermented to ethanol using Pichia stipitis CBS 6054. The fermentation rate increased with aeration but the pH also increased due to consumption of acetic acid by Pichia stipitis. Hemicellulose hydrolyzate containing 34 g/L xylose, 8 g/L glucose, 8 g/L Acetic acid, 0.73 g/L furfural, and 1 g/L hydroxymethyl furfural was fermented to 15 g/L ethanol in 72 h. The yield in all the hemicellulose hydrolyzates was 0.37–0.44 g ethanol/g (glucose + xylose). Nondetoxified hemicellulose hydrolyzate from dilute acid pretreated corn stover was fermented to ethanol with high yields, and this has the potential to improve the economics of the biomass to ethanol process.     

Lipid production from Yarrowia lipolytica Po1g grown in sugarcane bagasse hydrolysate

This study investigated the possibility of utilizing detoxified sugarcane bagasse hydrolysate (DSCBH) as an alternative carbon source to culture Yarrowia lipolytica Po1g for microbial oil and biodiesel production. Sugarcane bagasse hydrolysis with 2.5% HCl resulted in maximum total sugar concentration (21.38 g/L) in which 13.59 g/L is xylose, 3.98 g/L is glucose, and 2.78 g/L is arabinose. Detoxification of SCBH by Ca(OH)₂ neutralization reduced the concentration of 5-hydroxymethylfurfural and furfural by 21.31% and 24.84%, respectively. Growth of Y. lipolytica Po1g in DSCBH with peptone as the nitrogen source gave maximum biomass concentration (11.42 g/L) compared to NH₄NO₃ (6.49 g/L). With peptone as the nitrogen source, DSCBH resulted in better biomass concentration than d-glucose (10.19 g/L), d-xylose (9.89 g/L) and NDSCBH (5.88 g/L). The maximum lipid content, lipid yield and lipid productivity of Y. lipolytica Po1g grown in DSCBH and peptone was 58.5%, 6.68 g/L and 1.76 g/L-day, respectively.     

Enzymatic hydrolysis of sugarcane bagasse and straw mixtures pretreated with diluted acid

Abstract

In Brazil, sugarcane biomass is generated in large amounts. Sugarcane bagasse and straw are considered as an important feedstock for renewable energy and biorefinery. This paper aims to study the generation of monosaccharides (C5 and C6) from sugarcane biomass via processing bagasse or straw and mixtures of both materials (bagasse:straw 3:1, 1:1 and 1:3). Samples were pretreated with sulfuric acid which resulted in approximately 90% of hemicellulose solubilization, corresponding to around 58 g L^{? 1} of xylose. Pretreated straw showed greater susceptibility to enzymatic hydrolysis in comparison to bagasse, as shown by glucose yields of 76% and 65%, respectively, whereas the mixtures showed intermediate yields. Thus, one strategy to balance sugarcane biomass availability and possibly increasing 2G ethanol production would be to use bagasse–straw mixtures in appropriate ratios according to market fluctuations. Untreated and pretreated samples were analyzed using X-ray diffraction, but there was no relationship to enzymatic hydrolysis.     

Fermentation of cellulosic hydrolysates obtained by enzymatic saccharification of sugarcane bagasse pretreated by hydrothermal processing

This work aims to evaluate the fermentability of cellulosic hydrolysates obtained by enzymatic saccharification of sugarcane bagasse pretreated by hydrothermal processing using Candida guilliermondii FTI 20037 yeast. The inoculum was obtained from yeast culture in a medium containing glucose as a carbon source supplemented with rice bran extract, CaCl₂·2H₂O and (NH₄)₂SO₄ in 50 mL Erlenmeyer flasks, containing 20 mL of medium, initial 5.5 pH under agitation of an orbital shaker (200 rpm) at 30°C for 24 h. The cellulosic hydrolysates, prior to being used as a fermentation medium, were autoclaved for 15 min at 0.5 atm and supplemented with the same nutrients employed for the inoculum, except the glucose, using the same conditions for the inoculum, but with a period of 48 h. Preliminary results showed the highest consumption of glucose (97%) for all the hydrolysates, at 28 h of fermentation. The highest concentration of ethanol (20.5 g/L) was found in the procedure of sugarcane bagasse pretreated by hydrothermal processing (195°C/10 min in 20 L reactor) and delignificated with NaOH 1.0% (w/v), 100°C, 1 h in 500 mL stainless steel ampoules immersed in an oil bath.     

Production and characterization of poly‐3‐hydroxybutyrate from biodiesel‐glycerol by Burkholderia cepacia ATCC 17759

Glycerol, a byproduct of the biodiesel industry, can be used by bacteria as an inexpensive carbon source for the production of value‐added biodegradable polyhydroxyalkanoates (PHAs). Burkholderia cepacia ATCC 17759 synthesized poly‐3‐hydroxybutyrate (PHB) from glycerol concentrations ranging from 3% to 9% (v/v). Increasing the glycerol concentration results in a gradual reduction of biomass, PHA yield, and molecular mass (M_n and M_w) of PHB. The molecular mass of PHB produced utilizing xylose as a carbon source is also decreased by the addition of glycerol as a secondary carbon source dependent on the time and concentration of the addition. ¹H‐NMR revealed that molecular masses decreased due to the esterification of glycerol with PHB resulting in chain termination (end‐capping). However, melting temperature and glass transition temperature of the end‐capped polymers showed no significant difference when compared to the xylose‐based PHB. The fermentation was successfully scaled up to 200 L for PHB production and the yield of dry biomass and PHB were 23.6 g/L and 7.4 g/L, respectively. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

A C6/C5 co‐fermenting Saccharomyces cerevisiae strain with the alleviation of antagonism between xylose utilization and robustness

During second‐generation bioethanol production from lignocellulosic biomass, the desired traits for fermenting microorganisms, such as Saccharomyces cerevisiae, are high xylose utilization and high robustness to inhibitors in lignocellulosic hydrolysates. However, as observed previously, these two traits easily showed the antagonism, one rising and the other falling, in the C6/C5 co‐fermenting S. cerevisiae strain. In this study, LF1 obtained in our previous study is an engineered budding yeast strain with a superior co‐fermentation capacity of glucose and xylose, and was then mutated by atmospheric and room temperature plasma (ARTP) mutagenesis to improve its robustness. The ARTP‐treated cells were grown in 50% (v/v) leachate from lignocellulose pretreatment with high inhibitors content for adaptive evolution. After 30 days, the generated mutant LF1‐6 showed significantly enhanced tolerance, with a six‐fold increase in cell density in the above leachate. Unfortunately, its xylose utilization dropped markedly, indicating the recurrence of the negative correlation between xylose utilization and robustness. To alleviate this antagonism, LF1‐6 cells were iteratively mutated with ARTP mutagenesis and then anaerobically grown using xylose as the sole carbon source, and xylose utilization was restored in the resulting strain 6M‐15. 6M‐15 also exhibited increased co‐fermentation performance of xylose and glucose with the highest ethanol productivity reported to date (0.525 g g^?1 h^?1) in high‐level mixed sugars (80 g L^?1 glucose and 40 g L^?1 xylose) with no inhibitors. Meanwhile, its fermentation time was shortened by 8 h compared to that of LF1. During the fermentation of non‐detoxified lignocellulosic hydrolysate with high inhibitor concentrations at pH ~3.5, 6M‐15 can efficiently convert glucose and xylose with an ethanol yield of 0.43 g g^?1. 6M‐15 is also regarded as a potential chassis cell for further design of a customized strain suitable for production of second‐generation bioethanol or other high value‐added products from lignocellulosic biomass.     

Enhanced ethanol production from industrial lignocellulose hydrolysates by a hydrolysate-cofermenting Saccharomyces cerevisiae strain

Industrial production of lignocellulosic ethanol requires a microorganism utilizing both hexose and pentose, and tolerating inhibitors. In this study, a hydrolysate-cofermenting Saccharomyces cerevisiae strain was obtained through one step in vivo DNA assembly of pentose-metabolizing pathway genes, followed by consecutive adaptive evolution in pentose media containing acetic acid, and direct screening in biomass hydrolysate media. The strain was able to coferment glucose and xylose in synthetic media with the respective maximal specific rates of glucose and xylose consumption, and ethanol production of 3.47, 0.38 and 1.62 g/g DW/h, with an ethanol titre of 41.07 g/L and yield of 0.42 g/g. Industrial wheat straw hydrolysate fermentation resulted in maximal specific rates of glucose and xylose consumption, and ethanol production of 2.61, 0.54 and 1.38 g/g DW/h, respectively, with an ethanol titre of 54.11 g/L and yield of 0.44 g/g. These are among the best for wheat straw hydrolysate fermentation through separate hydrolysis and cofermentation.

     

Systems metabolic engineering of Corynebacterium glutamicum for high-level production of 1,3-propanediol from glucose and xylose

Corynebacterium glutamicum is a versatile chassis which has been widely used to produce various amino acids and organic acids. In this study, we report the development of an efficient C. glutamicum strain to produce 1,3-propanediol (1,3-PDO) from glucose and xylose by systems metabolic engineering approaches, including (1) construction and optimization of two different glycerol synthesis modules; (2) combining glycerol and 1,3-PDO synthesis modules; (3) reducing 3-hydroxypropionate accumulation by clarifying a mechanism involving 1,3-PDO re-consumption; (4) reducing the accumulation of toxic 3-hydroxypropionaldehyde by pathway engineering; (5) engineering NADPH generation pathway and anaplerotic pathway. The final engineered strain can efficiently produce 1,3-PDO from glucose with a titer of 110.4 g/L, a yield of 0.42 g/g glucose, and a productivity of 2.30 g/L/h in fed-batch fermentation. By further introducing an optimized xylose metabolism module, the engineered strain can simultaneously utilize glucose and xylose to produce 1,3-PDO with a titer of 98.2 g/L and a yield of 0.38 g/g sugars. This result demonstrates that C. glutamicum is a potential chassis for the industrial production of 1,3-PDO from abundant lignocellulosic feedstocks.     

High tolerance to glycerol and high production of 1,3‐propanediol in batch fermentations by microbial consortium from marine sludge

1,3‐Propanediol (1,3‐PD) is a versatile bulk chemical and widely used as a monomer to synthesis polymers, such as polyesters, polyethers and polyurethanes. 1,3‐PD can be produced by microbial fermentation with the advantages of the environmental protection and sustainable development. Low substrate tolerance and wide by‐product profile limit microbial production of 1,3‐PD by Klebsiella pneumonia on industrial scale. In this study, microbial consortia were investigated to overcome some disadvantages of pure fermentation by single strain. Microbial consortium named DL38 from marine sludge gave the best performance. Its bacterial community composition was analyzed by 16S rRNA gene amplicon high‐throughput sequencing and showed that Enterobacteriaceae was the most abundant family. Compared with three K. pneumonia strains isolated from DL38, the microbial consortium could grow well at an initial glycerol concentration of 200 g/L to produce 81.40 g/L of 1,3‐PD with a yield of 0.63 mol/mol. This initial glycerol concentration is twice the highest concentration by single isolated strain and more than the critical value (188 g/L) extrapolated from the fermentation kinetics for K. pneumonia. On the other hand, a small amount of by‐products were produced in batch fermentation of microbial consortium DL38,  especially no 2,3‐butanediol detected. The mixed culture of strain W3, Y5 and Y1 improved the tolerance to glycerol and changed the metabolite profile of single strain W3. The batch fermentation with the natural proportion (W3: Y5: Y1 = 208: 82: 17) was superior to that with other proportions and single strain. This study showed that microbial consortium DL38 possessed excellent substrate tolerance, narrow by‐product profile and attractive potential for industrial production of 1,3‐PD.     

Xylitol production from a mutant strain of Candida tropicalis

Aims: To characterize the kinetics of growth, sugar uptake and xylitol production in batch and fed‐batch cultures for a xylitol assimilation‐deficient strain of Candida tropicalis isolated via chemical mutagenesis. Methods and Results: Chemical mutagenesis using nitrosoguanidine led to the isolation of the xylitol‐assimilation deficient strain C. tropicalis SS2. Shake‐flask fermentations with this mutant showed a sixfold higher xylitol yield than the parent strain in medium containing 25 g l^?1 glucose and 25 g l^?1 xylose. With 20 g l^?1 glycerol, replacing glucose for cell growth, and various concentrations of xylose, the studies indicated that the mutant strain resulted in xylitol yields from xylose close to theoretical. Under fully aerobic conditions, fed‐batch fermentation with repeated addition of glycerol and xylose resulted in 3·3 g l^?1 h^?1 xylitol volumetric productivity with the final concentration of 220 g l^?1 and overall yield of 0·93 g g^?1 xylitol. Conclusions: The xylitol assimilation‐deficient mutant isolated in this study showed the potential for high xylitol yield and volumetric productivity under aerobic conditions. In the evaluation of glycerol as an alternative low‐cost nonfermentable carbon source, high biomass and xylitol yields under aerobic conditions were achieved; however, the increase in initial xylose concentrations resulted in a reduction in biomass yield based on glycerol consumption. This may be a consequence of the role of an active transport system in the yeast requiring increasing energy for xylose uptake and possible xylitol secretion, with little or no energy available from xylose metabolism. Significance and Impact of the Study: The study confirms the advantage of using a xylitol assimilation‐deficient yeast under aerobic conditions for xylitol production with glycerol as a primary carbon source. It illustrates the potential of using the xylose stream in a biomass‐based bio‐refinery for the production of xylitol with further cost reductions resulting from using glycerol for yeast growth and energy production.     

Reducing sugar accumulation from alkali pretreated sugar cane bagasse using Cellulomonas

Summary An active cellulolytic culture was obtained following growth of the Cellulomonas strain CS1-17 for 24 h at 32° C on 1 or 2% alkali pretreated sugar cane bagasse. Environmental conditions were then varied to favour reducing sugar accumulation from fresh alkali pretreated bagasse added to the 24 h culture medium at 75 g/l. After incubation for an additional 48 h at 37° C under anaerobic, aerobic and aerobic+0.2% sodium azide conditions, reducing sugar was accumulated at 22.8, 23.7 and 25.6 g/l respectively. Approximately 83% of this release occurred during the first 18 h of incubation and the reducing sugar released contained approximately 14% xylose, 35% glucose, and 26% cellobiose. Addition of exogenous cellobiase resulted in conversion of the cellobiose to glucose.     

Injection of air into the headspace improves fermentation of phosphoric acid pretreated sugarcane bagasse by Escherichia coli MM170

Microaeration (injecting air into the headspace) improved the fermentation of hemicellulose hydrolysates obtained from the phosphoric acid pretreatment of sugarcane bagasse at 170 °C for 10 min. In addition, with 10% slurries of phosphoric acid pretreated bagasse (180 °C, 10 min), air injection into the headspace promoted xylose utilization and increased ethanol yields from 0.16 to 0.20 g ethanol/g bagasse dry weight using a liquefaction plus simultaneous saccharification and co-fermentation process (L+SScF). This process was scaled up to 80 L using slurries of acid pretreated bagasse (96 h incubation; 0.6 L of air/min into the headspace) with ethanol yields of 312-347 L (82-92 gal) per tonne (dry matter), corresponding to 0.25 and 0.27 g/g bagasse (dry weight). Injection of small amounts of air into the headspace may provide a convenient alternative to subsurface sparging that avoids problems of foaming, sparger hygiene, flotation of particulates, and phase separation.