Targeting DNA mismatches with rhodium intercalators functionalized with a cell-penetrating peptide

Cell-penetrating peptides are widely used to deliver cargo molecules into cells. Here we describe the synthesis, characterization, DNA binding, and cellular uptake studies of a series of metal-peptide conjugates containing oligoarginine as a cell-penetrating peptide. d-Octaarginine units are appended onto a rhodium intercalator containing the sterically expansive chrysenequinone diimine (chrysi) ligand to form Rh(chrysi)(phen)(bpy)(3+)-tethered oligoarginine conjugates, where the peptide is attached to the ancillary bpy ligand; some conjugates also include a fluorescein or thiazole orange tag. These complexes bind and with photoactivation selectively cleave DNA neighboring single-base mismatches. The presence of the oligoarginines is found to increase the nonspecific binding affinity of the complexes for both matched and mismatched DNA, but for these conjugates, photocleavage remains selective for the mismatched site, as assayed using both gel electrophoresis and mass spectrometry experiments. Significantly, the rhodium complex does not interfere with the delivery properties of the cell-penetrating peptide. Confocal microscopy experiments show rapid nuclear localization of the metal-peptide conjugates containing the tethered fluorescein. Mass spectrometry experiments confirm the association of the rhodium with the HeLa cells. These results provide a strategy for targeting mismatch-selective metal complexes inside cell nuclei.     

Single-tube reaction using peptide nucleic acid as both PCR clamp and sensor probe for the detection of rare mutations

The detection of rare mutant DNA from a background of wild-type alleles usually requires laborious manipulations, such as restriction enzyme digestion and gel electrophoresis. Here, we describe a protocol for homogeneous detection of rare mutant DNA in a single tube. The protocol uses a peptide nucleic acid (PNA) as both PCR clamp and sensor probe. The PNA probe binds tightly to perfectly matched wild-type DNA template but not to mismatched mutant DNA sequences, which specifically inhibits the PCR amplification of wild-type alleles without interfering with the amplification of mutant DNA. A fluorescein tag (which undergoes fluorescence resonance energy transfer with the adjacent fluorophore of an anchor probe when both are annealed to the template DNA) also allows the PNA probe to generate unambiguous melting curves to detect mutant DNA during real-time fluorescent monitoring. The whole assay takes about only 1 h. This protocol has been used for detecting mutant K-ras DNA and could be applied to the detection of other rare mutant DNAs.     

Simultaneous detection of dual single-base mutations by capillary electrophoresis using quantum dot-molecular beacon probe

Here a novel capillary electrophoresis (CE) for simultaneous detection of dual single-base mutations using quantum dot-molecular beacon (QD-MB) probe is described. Two QD-MB probes were designed using 585 and 650-nm emitting CdTe QDs which were covalently conjugated to MBs with different DNA oligonucleotide sequences by amide linkage and streptavidin-biotin binding, respectively. The hybridizations of QD-MB probes with different DNA targets were then monitored by CE, and results indicated that the two QD-MB probes specifically hybridized with their complementary DNA sequences, respectively. Target DNA identification was observed to have a high sensitivity of 16.2 pg in CE. Furthermore, the simultaneous detection of dual single-base mutations in a given DNA oligonucleotide was successfully achieved in CE using above two QD-MB probes. This novel CE-assisted QD-MB biosensor offers a promising approach for simultaneous detection of multiple single-base mutations, and exhibits potential capability in the single nucleotide polymorphism (SNP) analysis and high-sensitivity DNA detection.     

A method which facilitates the ordering of DNA restriction fragments

Summary The Southern transfer technique has been used to provide a generally applicable method for ordering DNA restriction fragments. It involves electrophoresis of partially digested DNA, transfer to nitrocellulose filter paper and annealing to a ³²P-labelled fragment. Only those partials containing that particular fragment will reanneal to the probe and produce bands on autoradiography. The size of each partial in the labelled set is the sum of the size of the fragment used as probe and of one or more adjacent fragments. Thus the size of the adjacent fragments can be determined from the size increments of this set of partials. The method is illustrated by the mapping of certain BamHI sites on coliphage 186 DNA.     

The method of single-nucleotide variations detection using capillary electrophoresis and molecular beacons

We demonstrate that single-nucleotide variations in a DNA sequence can be detected using capillary electrophoresis (CE) and molecular beacons (MBs). In this method, the region surrounding the site of a nucleotide variation was amplified in a polymerase chain reaction, then hybridize PCR products with each of MBs. The sequences of the PCR products are different at the site of 2,044 in exon of interleukin (IL)-13 which to be identified. Through denaturation, the PCR product became single strand and hybridized with the completely complementary MB. The MB-target duplexes were separated using CE and solution-based fluorescence techniques. The results show that in each reaction a fluorescent response was elicited from the molecular beacon which was perfectly complementary to the amplified DNA, but not from the other MB whose probe sequence mismatched the target sequence. The method of CE based on MBs is able to identify single-nucleotide variations in a DNA sequence and can discriminate the genotyping of the SNP between the homo- and heteroduplexes of DNA fragments.     

Identification of an orthogonal peptide binding motif for biarsenical multiuse affinity probes

Biarsenical multiuse affinity probes (MAPs) complexed with ethanedithiol (EDT) permit the selective cellular labeling of proteins engineered with tetracysteine motifs, but are limited by the availability of a single binding motif (i.e., CCPGCC or PG tag) that prevents the differential labeling of coexpressed proteins. To overcome this problem, we have used a high-throughput peptide screen to identify an alternate binding motif (i.e., CCKACC or KA tag), which has a similar brightness to the classical sequence upon MAP binding, but displays altered rates and affinities of association that permit the differential labeling of these peptide sequences by the red probe 4,5-bis(1,3,2-dithiarsolan-2-yl)-resorufin (ReAsH-EDT2) or its green cognate 4',5'-bis(1,3,2-dithoarsolan-2-yl)fluorescein (FLAsH-EDT2). The utility of this labeling strategy was demonstrated following the expression of PG- and KA-tagged subunits of RNA polymerase in E. coli. Specific labeling of two subunits of RNA polymerase in cellular lysates was achieved, whereby ReAsH-EDT2 is shown to selectively label the PG-tag on RNA polymerase alpha-subunit prior to the labeling of the KA-tag sequence of the beta-subunit of RNA polymerase with FlAsH-EDT2. These results demonstrate the ability to selectively label multiple individual proteins with orthogonal sequence tags in complex cellular lystates with spectroscopically distinct MAPs, and indicate the absolute specificity of ReAsH to target expressed proteins with essentially no nonspecific binding interactions.     

Combining sequence-specific probes and DNA binding dyes in real-time PCR for specific nucleic acid quantification and melting curve analysis

Currently, in real-time PCR, one often has to choose between using a sequence-specific probe and a nonspecific double-stranded DNA (dsDNA) binding dye for the detection of amplified DNA products. The sequence-specific probe has the advantage that it only detects the targeted product, while the nonspecific dye has the advantage that melting curve analysis can be performed after completed amplification, which reveals what kind of products have been formed. Here we present a new strategy based on combining a sequence-specific probe and a nonspecific dye, BOXTO, in the same reaction, to take the advantage of both chemistries. We show that BOXTO can be used together with both TaqMan probes and locked nucleic acid (LNA) probes without interfering with the PCR. The probe signal reflect formation of target product, while melting curve analysis of the BOXTO signal reveals primer-dimer formation and the presence of any other anomalous products.     

Tag/hybridization-based sensitive detection of polymerase chain reaction products

The polymerase chain reaction (PCR) is an important technology to amplify a single copy or a few copies of DNA segment in genomic DNAs, visualizing the segment as DNA fragment. Thus, PCR is frequently used in various examinations such as detection of bacteria and fungi in the food industry. Here, we report a simple and sensitive method for detection of PCR products using single-strand tag sequence and hybridization of the tag sequence to the complementary tag sequence immobilized on solid material (STH). The detection sensitivity was found to be at least 50 times higher than electrophoresis/ethidium bromide (EtBr) visualization for approximately a 500-bp fragment and higher than the ordinary hybridization, that is, hybridization of denatured PCR product to probe sequence immobilized on solid material.     

Digital chemiluminescence imaging of DNA sequencing blots using a charge-coupled device camera.

Digital chemiluminescence imaging with a cryogenically cooled charge-coupled device (CCD) camera is used to visualize DNA sequencing fragments covalently bound to a blotting membrane. The detection is based on DNA hybridization with an alkaline phosphatase(AP) labeled oligodeoxyribonucleotide probe and AP triggered chemiluminescence of the substrate 3-(2'-spiro-adamantane)-4-methoxy-4-(3"-phosphoryloxy)phenyl- 1,2-dioxetane (AMPPD). The detection using a direct AP-oligonucleotide conjugate is compared to the secondary detection of biotinylated oligonucleotides with respect to their sensitivity and nonspecific binding to the nylon membrane by quantitative imaging. Using the direct oligonucleotide-AP conjugate as a hybridization probe, sub-attomol (0.5 pg of 2.7 kb pUC plasmid DNA) quantities of membrane bound DNA are detectable with 30 min CCD exposures. Detection using the biotinylated probe in combination with streptavidin-AP was found to be background limited by nonspecific binding of streptavidin-AP and the oligo(biotin-11-dUTP) label in equal proportions. In contrast, the nonspecific background of AP-labeled oligonucleotide is indistinguishable from that seen with 5'-32P-label, in that respect making AP an ideal enzymatic label. The effect of hybridization time, probe concentration, and presence of luminescence enhancers on the detection of plasmid DNA were investigated.     

Structural dynamics and oligomeric interactions of Na+,K(+)-ATPase as monitored using fluorescence energy transfer.

The oligomeric nature of the purified lamb kidney Na+,K(+)-ATPase was investigated by measuring the fluorescence energy transfer between catalytic (alpha) subunits following sequential labeling with fluorescein 5'-isothiocyanate (FITC) and erythrosin 5'-isothiocyanate (ErITC). Although these two probes had different spectral responses upon reaction with the enzyme, our studies suggest that a sizeable proportion of their binding occurs at the same ATP protectable, active site domain of alpha. Fluorescence energy transfer (FET) from donor (FITC) to acceptor (ErITC) revealed an apparent 56 A distance between the putative ATP binding sites of alpha subunits, which is consistent with (alpha beta)2 dimers rather than randomly spaced alpha beta heteromonomers. In this work, methods were introduced to eliminate the contribution of nonspecific probe labeling to FET values and to determine the most probable orientation factor (K2) for these rigidly bound fluorophores. FET measurements between anthroylouabain/ErITC, 5'-iodoacetamide fluorescein (5'IAF)/ErITC, and TNP-ATP/FITC, donor/acceptor pairs were also made. Interestingly, none of these distances were affected by ligand-dependent changes in enzyme conformation. These results and those from electron microscopy imaging (Ting-Beall et al. 1990. FEBS Lett. 265:121) suggest a model in which ATP binding sites of (alpha beta)2 dimers are 56 A apart, and reside 30 A from the intracellular surface of the membrane contiguous with the phosphorylation domain.     

Automated sequencing of fluorescently labelled DNA by chemical degradation

A new general method for sequencing fluorescently labelled DNA by chemical degradation has been developed. It is based on the observation that fluorescein attached via a mercaptopropyl or aminopropyl linker arm to the 5'-phosphate of an oligonucleotide is stable during the reactions commonly used in chemical cleavage procedures. DNA to be degraded is first enzymatically synthesized in vitro by annealing and extending a fluorescently labelled primer thereby introducing the fluorescent label at the 5'-end of the fragment. The newly synthesized fluorescently labelled DNA is then chemically degraded using: (a) a set of four different cleavage reactions; or (b) only one reaction comprising methylation of G-residues followed by a partial cleavage with piperidine in the presence of sodium chloride. The fluorescent degradation products are loaded on either four lanes or one lane of the gel, respectively, and the emitted fluorescence detected online during electrophoresis. In the 'four reactions/four lanes' method 200-350 bp (base pairs) can be read from the labelled end. The 'one reaction/one lane' method, in which the nucleotide sequence is determined by measuring different signal intensities following the rule G greater than A greater than C greater than T, currently yields around 100-200 bp of sequence per sample.     

Estimation of pK(a) values using microchip capillary electrophoresis and indirect fluorescence detection

Microchip capillary electrophoresis (CE), coupled with indirect fluorescence detection was investigated for estimating the pK(a) values of non-fluorescent compounds. The CE method is based on the differences in electrophoretic mobility of the analyte as a function of the pH of the running buffer. Nine compounds were tested, including several of pharmaceutical importance, with pK(a) values from 10.3 to 4.6. All buffers contained 5-TAMRA as the fluorescent probe for indirect detection. Calculated pK(a) values agreed well with literature values obtained by traditional methods, differing not more than 0.2 from the literature value. The current work on single lane chips demonstrates the principle of microchip CE with indirect detection as a viable method for estimating pK(a) values. However, increased throughput will be required using a multilane chip to enable the approach to be used practically.     

Quantification of DNA sequences obtained by polymerase chain reaction using a bioluminescent adsorbent.

We studied various parameters affecting the sensitivity of assays that use nucleic acid hybridization in solution followed by capture of the hybrid on a solid phase. Sensitivity is limited not only by nonspecific binding of the detection components but also by reannealing of the target or probe to itself. To perform sensitive assays, the probe concentration must be low enough to reduce high nonspecific binding. Under these conditions, however, the strand displacement reaction or the reannealing of the target to itself drastically decreases the hybridization yield, particularly when the target and the probes are different sizes. To improve DNA detection, we propose a sandwich method based on hybridization of oligonucleotides with a single-strand DNA obtained by polymerase chain reaction under asymmetric conditions. The assay can be performed in one step using a bioluminescent detection procedure which does not require any separation step. The specificity of the method is sufficient to perform a rapid detection and quantification of papillomavirus in biological samples.     

A photochemical method to map ethidium bromide binding sites on DNA: application to a bent DNA fragment

It is shown that, when irradiated in the visible, ethidium bromide (EB) engages in direct photochemistry with its DNA binding site. At the photochemical end point, an average of one single-strand break is produced per bound EB molecule in a reaction which also bleaches the dye chromophore. Using high-resolution electrophoresis, we have mapped the distribution of EB photocleavage sites on DNA, at one-base resolution. It is argued that because the photocleavage is stoichiometric, the resulting pattern is similar to, if not identical with, the local distribution of EB binding affinity. When interpreted in the context of the extensive thermodynamic and structural data which are available for EB, a binding distribution of that kind can be used to infer details of DNA structure variation within the underlying helix. As a first application of the method, we have used EB to probe the structure of a 265 bp fragment of DNA, which had been described as being bent as the result of a periodic array of oligo(A) segments [Kitchin et al. (1986) J. Biol. Chem. 261, 11302]. The EB mapping data provide evidence that the oligo(A) elements in this fragment assume a local secondary structure which is different than that assumed by isolated ApA nearest neighbors and that the ends of the oligo(A) elements comprise a junctional domain with EB binding properties which differ from those of the oligo(A) element or of random-sequence DNA.     

pK changes of ionizable reporter groups as an index of conformational changes in proteins. A study of fluorescein-labelled ribonuclease A.

A chemical derivative of bovine pancreatic ribonuclease A (RNase A) has been prepared by reaction with fluorescein-isothiocyanate at pH 6. This derivative has a fluorescein group covalently attached to the alpha-amino group of the protein. The enzymic properties of the modified protein are similar to those of RNase A. It is shown that the pK of the fluorescein group can be used as an index of protein conformation to monitor structural changes in the protein. In this work, the binding of a specific inhibitor (cytidine 2'-monophosphate) to RNase A, the isomerization process occurring in RNase A around pH 6, and the thermal unfolding of RNase A, were studied by mean of the pK changes of the fluorescein group. The results obtained by this method are fully consistent with those obtained by other methods. It is proposed that using ionizable reporter groups and their changes in pK to monitor conformational changes in proteins may be a sensitive tool both in equilibrium and kinetic studies.     

Fractionation of chromosome 15 with an affinity-based approach using magnetic beads

The two main shortcomings of the state-of-the-art method of sorting chromosomes, specificity and the efficiency of fractionating a significant amount of chromosomes, are addressed by this work in the design of a massively parallel approach using magnetic beads binding to a chromosome-specific DNA probe. In an attempt to isolate human chromosome 15 from a lymphoblastoid cell line, a chromosome 15 centromere-specific DNA probe with a fluorescent tag attached was reacted with the chromosomes. Magnetic beads bound to anti-FITC antibody were reacted with the labeled pool of chromosomes and separated by exposure to a magnetic field. The specificity of the fractionated pool was verified by performing fluorescence in situ hybridization on the isolated pool. The chromosome of interest could be enriched to about 75% within a maximum of 3-4 days, regardless of the amount of material.     

Binding of an oxindole alkaloid from Uncaria tomentosa to amyloid protein (Abeta1-40)

The primary aim of this work was to determine the interactions of an oxindole alkaloid (mitraphylline) isolated from Uncaria tomentosa with beta-amyloid 1-40 (Abeta1-40 protein) applying the capillary electrophoresis (CE) method. Specifically the Hummel-Dreyer method and Scatchard analysis were performed to study the binding of oxindole alkaloids with Abeta1-40 protein. Prior to these studies extraction of the alkaloid of interest was carried out. Identification of the isolated alkaloid was performed by the use of thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC) combined with electrospray ionization mass spectrometry (ESI-MS). The proposed approach was proved to be an efficient and accurate method for specific compound isolation and identification purposes. Moreover, analytical information from the CE approach can be considered as the valuable tool for binding constant determination. The binding constant of mitraphylline with Abeta1-40 protein determined by the Hummel-Dreyer method and Scatchard analysis equals K = 9.95 x 10(5) M(-1). The results obtained showed the significant binding of the tested compound with Abeta1-40 protein. These results are discussed and interpreted in the view of developing a strategy for identification of novel compounds of great importance in Alzheimer disease therapy.