In situ evaluation of surface roughness and micromorphology of temporary soft denture liner materials at different time intervals

Objective

To perform an in situ evaluation of surface roughness and micromorphology of two soft liner materials for dentures at different time intervals.

Background

The surface roughness of materials may influence the adhesion of micro‐organisms and inflammation of the mucosal tissues. The in situ evaluation of surface roughness and the micromorphology of soft liner materials over the course of time may present results different from those of in vitro studies, considering the constant presence of saliva and food, the changes in temperature and the pH level in the oral cavity.

Materials and methods

Forty‐eight rectangular specimens of each of the two soft liner materials were fabricated: a silicone‐based material (Mucopren Soft) and an acrylic resin‐based material (Trusoft). The specimens were placed in the dentures of 12 participants (n = 12), and the materials were evaluated for surface roughness and micromorphology at different time intervals: 0, 7, 30 and 60 days. Roughness (Ra) was evaluated by means of a roughness tester. Surface micromorphology was evaluated by scanning electron microscopy.

Results

Analysis of variance for randomised block design and Tukey's test showed that surface roughness values were lower in the groups using the silicone‐based material at all the time intervals (P < .0001). The average surface roughness was higher at time interval 0 than at the other intervals, for both materials (P < .0001). The surface micromorphology showed that the silicone material presented a more regular and smoother surface than the acrylic resin‐based material.

Conclusion

The surface roughness of acrylic resin‐based and silicone‐based denture soft liner materials decreased after 7 days of evaluation, leading to a smoother surface over time. The silicone‐based material showed lower roughness values and a smoother surface than the acrylic resin‐based material, thereby making it preferred when selecting more appropriate material, due its tendency to promote less biofilm build‐up.     

<Emphasis Type="Italic">ASAView</Emphasis>: Database and tool for solvent accessibility representation in proteins

Background  

Accessible surface area (ASA) or solvent accessibility of amino acids in a protein has important implications. Knowledge of surface residues helps in locating potential candidates of active sites. Therefore, a method to quickly see the surface residues in a two dimensional model would help to immediately understand the population of amino acid residues on the surface and in the inner core of the proteins.     

The fractal geometry of nutrient exchange surfaces does not provide an explanation for 3/4-power metabolic scaling

Background  

A prominent theoretical explanation for 3/4-power allometric scaling of metabolism proposes that the nutrient exchange surface of capillaries has properties of a space-filling fractal. The theory assumes that nutrient exchange surface area has a fractal dimension equal to or greater than 2 and less than or equal to 3 and that the volume filled by the exchange surface area has a fractal dimension equal to or greater than 3 and less than or equal to 4.     

The zebrafish prospero homolog prox1 is required for mechanosensory hair cell differentiation and functionality in the lateral line

Background  

The lateral line system in zebrafish is composed of a series of organs called neuromasts, which are distributed over the body surface. Neuromasts contain clusters of hair cells, surrounded by accessory cells.     

Leukocyte infiltrate in gastrointestinal adenocarcinomas is strongly associated with tumor microsatellite instability but not with tumor immunogenicity

Purpose  

To analyze the correlation of genomic instability with leukocyte infiltrate in gastrointestinal carcinomas (GIACs) and with tumor immunogenicity, e.g., HLA class I cell surface expression defects and galectin-3 and PDL-1 expression.     

Lack of evidence for a role of hydrophobins in conferring surface hydrophobicity to conidia and hyphae of Botrytis cinerea

Background  

Hydrophobins are small, cysteine rich, surface active proteins secreted by filamentous fungi, forming hydrophobic layers on the walls of aerial mycelia and spores. Hydrophobin mutants in a variety of fungi have been described to show 'easily wettable' phenotypes, indicating that hydrophobins play a general role in conferring surface hydrophobicity to aerial hyphae and spores.     

Quantification of the CBD-FITC conjugates surface coating on cellulose fibres

Background  

Cellulose Binding Domains (CBD) were conjugated with fluorescein isothiocyanate (FITC). The surface concentration of the Binding Domains adsorbed on cellulose fibres was determined by fluorescence image analysis.     

Efficient display of active lipase LipB52 with a <Emphasis Type="Italic">Pichia pastoris</Emphasis> cell surface display system and comparison with the LipB52 displayed on <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> cell surface

Background  

For industrial bioconversion processes, the utilization of surface-displayed lipase in the form of whole-cell biocatalysts is more advantageous, because the enzymes are displayed on the cell surface spontaneously, regarded as immobilized enzymes.     

Mechanomyography versus Electromyography,in monitoring the muscular fatigue

Background  

The use of the mechanomyogram (MMG) which detects muscular vibrations generated by fused individual fiber twitches has been refined. The study addresses a comparison of the MMG and surface electromyogram (SEMG) in monitoring muscle fatigue.     

Postnatal stem/progenitor cells derived from the dental pulp of adult chimpanzee

Background  

Chimpanzee dental pulp stem/stromal cells (ChDPSCs) are very similar to human bone marrow derived mesenchymal stem/stromal cells (hBMSCs) as demonstrated by the expression pattern of cell surface markers and their multipotent differentiation capability.     

Atomic force microscopy in vitro study of surface roughness and fractal character of a dental restoration composite after air-polishing

Background  

Surface roughness is the main factor determining bacterial adhesion, biofilm growth and plaque formation on the dental surfaces in vivo. Air-polishing of dental surfaces removes biofilm but can also damage the surface by increasing its roughness. The purpose of this study was to investigate the surface damage of different conditions of air-polishing performed in vitro on a recently introduced dental restorative composite.     

Display of wasp venom allergens on the cell surface of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Background  

Yeast surface display is a technique, where the proteins of interest are expressed as fusions with yeast surface proteins and thus remain attached to the yeast cell wall after expression. Our purpose was to study whether allergens expressed on the cell surface of baker's yeast Saccharomyces cerevisiae preserve their native allergenic properties and whether the yeast native surface glycoproteins interfere with IgE binding. We chose to use the major allergens from the common wasp Vespula vulgaris venom: phospholipase A1, hyaluronidase and antigen 5 as the model.     

HOLLOW: Generating Accurate Representations of Channel and Interior Surfaces in Molecular Structures

Background  

An accurate rendering of interior surfaces can facilitate the analysis of mechanisms at atomic-level detail, such as the transport of substrates in the ammonia channel. In molecular viewers, one must remove the exterior surface that obscures the channel surface by clipping the viewing plane or manually selecting the channel residues in order to display a partial surface. Neither method is entirely satisfactory, as unwanted additional pieces of surfaces are always generated.     

Species specificity,surface exposure,protein expression,immunogenicity, and participation in biofilm formation of <Emphasis Type="Italic">Porphyromonas gingivalis</Emphasis> HmuY

Background  

Porphyromonas gingivalis is a major etiological agent of chronic periodontitis. The aim of this study was to examine the species specificity, surface exposure, protein expression, immunogenicity, and participation in biofilm formation of the P. gingivalis heme-binding protein HmuY.     

Gene amplification of the Hps locus in Glycine max

Background  

Hydrophobic protein from soybean (HPS) is an 8 kD cysteine-rich polypeptide that causes asthma in persons allergic to soybean dust. HPS is synthesized in the pod endocarp and deposited on the seed surface during development. Past evidence suggests that the protein may mediate the adherence or dehiscence of endocarp tissues during maturation and affect the lustre, or glossiness of the seed surface.     

BRCA1 Zinc RING Finger Domain Disruption Alters Caspase Response in Ovarian Surface Epithelial Cells

Background  

The frequently occurring 185delAG mutation occurs in the amino-terminal zinc RING domain of the breast and ovarian cancer susceptibility gene, BRCA1. We sought to determine differential cell viability and apoptotic response of human ovarian surface epithelial cells with and without the 185delAG mutation.     

The <Emphasis Type="Italic">vaa</Emphasis> locus of <Emphasis Type="Italic">Mycoplasma hominis</Emphasis> contains a divergent genetic islet encoding a putative membrane protein

Background  

The Mycoplasma hominis vaa gene encodes a highly variable, surface antigen involved in the adhesion to host cells. We have analysed the structure of the vaa locus to elucidate the genetic basis for variation of vaa.     

Gene flow and population structure in the Mexican blind cavefish complex (<Emphasis Type="Italic">Astyanax mexicanus</Emphasis>)

Background  

Cave animals converge evolutionarily on a suite of troglomorphic traits, the best known of which are eyelessness and depigmentation. We studied 11 cave and 10 surface populations of Astyanax mexicanus in order to better understand the evolutionary origins of the cave forms, the basic genetic structuring of both cave and surface populations, and the degree to which present day migration among them affects their genetic divergence.     

Test method development to evaluate hot,humid air decontamination of materials contaminated with Bacillus anthracis ∆Sterne and B. thuringiensis Al Hakam spores

Aims

To develop test methods and evaluate the survival of Bacillus anthracis ?Sterne and Bacillus thuringiensis Al Hakam spores after exposure to hot, humid air.

Methods and Results

Spores (>7 logs) of both strains were dried on six different test materials. Response surface methodology was employed to identify the limits of spore survival at optimal test combinations of temperature (60, 68, 77°C), relative humidity (60, 75, 90%) and time (1, 4, 7 days). No spores survived the harshest test run (77°C, 90% r.h., 7 days), while > 6·5 logs of spores survived the mildest test run (60°C, 60% r.h., 1 day). Spores of both strains inoculated on nylon webbing and polypropylene had greater survival rates at 68°C, 75% r.h., 4 days than spores on other materials. Electron microscopy showed no obvious physical damage to spores using hot, humid air, which contrasted with pH‐adjusted bleach decontamination.

Conclusions

Test methods were developed to show that hot, humid air effectively inactivates B. anthracis ?Sterne and B. thuringiensis Al Hakam spores with similar kinetics.

Significance and Impact of the Study

Hot, humid air is a potential alternative to conventional chemical decontamination.     

Centrosome proteins form an insoluble perinuclear matrix during muscle cell differentiation

Background  

Muscle fibres are formed by elongation and fusion of myoblasts into myotubes. During this differentiation process, the cytoskeleton is reorganized, and proteins of the centrosome re-localize to the surface of the nucleus. The exact timing of this event, and the underlying molecular mechanisms are still poorly understood.