Sequence analysis of the Clostridium cellulolyticum endoglucanase-A-encoding gene, celCCA

The nucleotide sequence of a Clostridium cellulolyticum endo-beta-1,4- glucanase (EGCCA)-encoding gene (celCCA) and its flanking regions, was determined. An open reading frame (ORF) of 1425 bp was found, encoding a protein of 475 amino acids (aa). This ORF began with an ATG start codon and ended with a TAA ochre stop codon. The N-terminal region of the EGCCA protein resembled a typical signal sequence of a Gram-positive bacterial extracellular protein. A putative signal peptidase cleavage site was determined. EGCCA, without a signal peptide, was found to be composed of more than 35% hydrophobic aa and to have an Mr of 50715. Comparison of the encoded sequence with other known cellulase sequences showed the existence of various kinds of aa sequence homologies. First, a strong homology was found between the C-terminal region of EGCCA, containing a reiterated stretch of 24 aa, and the conserved reiterated region previously found to exist in four Clostridium thermocellum endoglucanases and one xylanase from the same organism. This region was suspected of playing a role in organizing the cellulosome complex. Second, an extensive homology was found between EGCCA and the N-terminal region of the large endoglucanase, EGE, from C. thermocellum, which suggests that they may have a common ancestral gene. Third, a region, which extended for 21 aa residues beginning at aa + 127, was found to be homologous with regions of cellulases belonging to Bacilli, Clostridia and Erwinia chrysanthemi.     

Nucleotide sequence and deletion analysis of the cellulase-encoding gene celH of Clostridium thermocellum

The complete nucleotide sequence of the celH gene of Clostridium thermocellum was determined. The open reading frame extended over 2.7-kb DNA fragment and encoded a 900-amino acid (aa) protein (Mr 102,301) which hydrolyzes carboxymethylcellulose, p-nitrophenyl-beta-D-cellobioside, methylumbelliferyl- beta-D-cellobioside, barley beta-glucan, and larchwood xylan. The N terminus showed a typical signal peptide, and a cleavage site after Ser44 was predicted. Two Pro-Thr-Ser-rich regions divided the protein into three approximately equal domains. The central 328-aa region was similar to the N-terminal part, carrying the active site, of C. thermocellum endoglucanase E (EGE; 30.2%). The C-terminal region ended with two conserved 24-aa stretches showing close similarity with those previously described in EGA, EGB, EGD, EGE, EGX, and xylanase from C. thermocellum. Deletions of celH removing up to 327 codons from the 5' end and up to 245 codons from the 3' end of the coding sequence did not affect enzyme activity, confirming that the central domain was indeed responsible for catalytic activity. Production of truncated EGH in Escherichia coli was increased up to 120-fold by fusing fragments containing the 3' portion of the gene with the start of lacZ' present in pTZ19R.     

Nucleotide sequence of the celC gene encoding endoglucanase C of Clostridium thermocellum

The nucleotide sequence of the cellulase gene celC, encoding endoglucanase C of Clostridium thermocellum, has been determined. The coding region of 1032 bp was identified by comparison with the N-terminal amino acid (aa) sequence of endoglucanase C purified from Escherichia coli. The ATG start codon is preceded by an AGGAGG sequence typical of ribosome-binding sites in Gram-positive bacteria. The derived amino acid sequence corresponds to a protein of Mr 40,439. Amino acid analysis and apparent Mr of endoglucanase C are consistent with the amino acid sequence as derived from the DNA sequencing data. A proposed N-terminal 21-aa residue leader (signal) sequence differs from other prokaryotic signal peptides and is non-functional in E. coli. Most of the protein bears no resemblance to the endoglucanases A, B, and D of the same organism. However, a short region of homology between endoglucanases A and C was identified, which is similar to the established active sites of lysozymes and to related sequences of fungal cellulases.     

Characterization and comparison of Clostridium cellulovorans endoglucanases-xylanases EngB and EngD hyperexpressed in Escherichia coli.

By the use of a T7 expression system, endoglucanases-xylanases EngB and EngD from Clostridium cellulovorans were hyperexpressed and purified from Escherichia coli. The two enzymes demonstrated both endoglucanase and xylanase activities. The substrate specificities of both endoglucanases were similar except that EngD had four-times-greater p-nitrophenyl beta-1,4-cellobiosidase activity. The two proteins were very homologous (80%) up to the Pro-Thr-Thr region which divided the protein into -NH2- and -COOH-terminals. The -COOH- region of EngB has high homology to the endoglucanases and a xylanase from Clostridium thermocellum and to an endoglucanase from Clostridium cellulolyticum and did not show strong binding to cellulose (Avicel). However, the -COOH- region of EngD, which had homology to the cellulose-binding domains of Cellulomonas fimi exo- and endoglucanases and to Pseudomonas fluorescens endoglucanase, demonstrated binding ability to cellulose even when the domain was fused to the N-terminal domain of EngB. By probing the Avicel-purified cellulase complex (F8) with anti-EngB and anti-EngD antibodies, both EngB and EngD were shown to be present on the cellulase complex of C. cellulovorans. Many proteins homologous to EngB and EngD were also present on the complex.     

Thermostable aminopeptidase from Pyrococcus horikoshii

From the genome sequence data of the thermophilic archaeon Pyrococcus horikoshii, an open reading frame was found which encodes a protein (332 amino acids) homologous with an endoglucanase from Clostridium thermocellum (42% identity), deblocking aminopeptidase from Pyrococcus furiosus (42% identity) and an aminopeptidase from Aeromonas proteolytica (18% identity). This gene was cloned and expressed in Escherichia coli, and the characteristics of the expressed protein were examined. Although endoglucanase activity was not detected, this protein was found to have aminopeptidase activity to cleave the N-terminal amino acid from a variety of substrates including both N-blocked and non-blocked peptides. The enzyme was stable at 90 degrees C, with the optimum temperature over 90 degrees C. The metal ion bound to this enzyme was calcium, but it was not essential for the aminopeptidase activity. Instead, this enzyme required the cobalt ion for activity. This enzyme is expected to be useful for the removal of N(alpha)-acylated residues in short peptide sequence analysis at high temperatures.     

Isolation and characterization of a cDNA encoding a novel human transcription factor TFIID subunit containing similarities with histones H2B and H3

Using the yeast two-hybrid system, we isolated a human cDNA that encodes a protein (hp22) interacting with TATA box-binding factor TFIID subunit p80 containing similarity with histone H4. Sequence analysis showed that the open reading frame (ORF) specifies a 161-amino-acid (aa) polypeptide homologous to Drosophila melanogaster TFIID subunit p22 (dp22). Comparison of the aa sequence of human TFIID subunit p22 (hp22) with that of dp22 revealed that p22 is composed of two distinct regions; the less conserved N-terminal (20% identity) and the highly conserved C-terminal (65% identity) regions. Additionally, the C-terminal region was found to contain similarities with histones H2B and H3. Northern blot analysis showed mRNA corresponding to hp22 to be expressed in all tissues examined     

Characterization of endoglucanase A from Clostridium cellulolyticum.

A construction was carried out to obtain a high level of expression in Escherichia coli of the gene celCCA, coding for the endoglucanase A from Clostridium cellulolyticum (EGCCA). The enzyme was purified in two forms with different molecular weights, 51,000 and 44,000. The smaller protein was probably the result of proteolysis, although great care was taken to prevent this process from occurring. Evidence was found for the loss of the conserved reiterated domains which are characteristic of C. thermocellum and C. cellulolyticum cellulases. The two forms were extensively studied, and it was demonstrated that although they had the same pH and temperature optima, they differed in their catalytic properties. The truncated protein gave the more efficient catalytic parameters on carboxymethyl cellulose and showed improved endoglucanase characteristics, whereas the intact enzyme showed truer cellulase characteristics. The possible role of clostridial reiterated domains in the hydrolytic activity toward crystalline cellulose is discussed.     

Conserved reiterated domains in Clostridium thermocellum endoglucanases are not essential for catalytic activity

The complete nucleotide sequence of the Clostridium thermocellum celE gene, coding for an endo-beta-1,4-glucanase (endoglucanase E; EGE) with xylan-hydrolysing activity has been determined. The structural gene consists of an open reading frame (ORF) of 2442 bp commencing with a GTG start codon and followed by a TAA stop codon. The nucleotide sequence obtained has been confirmed by comparing the predicted amino acid sequence with that derived by N-terminal amino acid sequencing of the purified protein. The EGE sequence contains a region homologous to the reiterated domain found at the C terminus of other endoglucanases from the same organism. BAL 31 deletions of the structural gene have revealed the extent to which this conserved sequence is necessary for endoglucanase and xylanase activity. A region of DNA, upstream from the structural gene has also been sequenced and a ribosome-binding site and putative promoter sequences have been identified. A second ORF which ends 349 bp 5' to the GTG start codon of the celE gene has also been identified. The encoded product contains a C terminus homologous to other C. thermocellum endoglucanases.     

Catalytic properties of the cellulose-binding endoglucanase F from Fibrobacter succinogenes S85.

The celF gene from the predominant cellulolytic ruminal bacterium Fibrobacter succinogenes encodes a 118.3-kDa cellulose-binding endoglucanase, endoglucanase F (EGF). This enzyme possesses an N-terminal cellulose-binding domain and a C-terminal catalytic domain. The purified catalytic domain displayed an activity profile typical of an endoglucanase, with high catalytic activity on carboxymethyl cellulose and barley beta-glucan. Immunoblotting of EGF and the formerly characterized endoglucanase 2 (EG2) from F. succinogenes with antibodies prepared against each of the enzymes demonstrated that EGF and EG2 contain cross-reactive epitopes. This data in conjunction with evidence that the proteins are the same size, share a 19-residue internal amino acid sequence, possess similar catalytic properties, and both bind to cellulose allows the conclusion that celF codes for EG2.     

Nucleotide sequence of the engXCA gene encoding the major endoglucanase of Xanthomonas campestris pv. campestris

The nucleotide sequence of the gene (engXCA) encoding the major extracellular endoglucanase (ENGXCA) of the phytopathogenic bacterium Xanthomonas campestris pv. campestris (X. c. campestris) was determined and compared with the N-terminal amino acid (aa) sequence of the purified enzyme. An open reading frame of 1479 bp encoding 493 aa was identified, of which the N-terminal 25 aa represent a potential signal peptide. Determination of the exact position of a Tn5 insertion within engXCA, which did not reduce the encoded enzyme activity, indicated that the C-terminal region of the protein is not crucial for ENGXCA activity. Comparison of the complete deduced aa sequence with those deduced from other endoglucanase- and exoglucanase-encoding genes revealed a region with a high degree of homology, located towards the C terminus of the protein. These data indicate that the X. c. campestris ENGXCA may have a domain structure similar to that of many other bacterial and fungal cellulolytic enzymes. Hydrophobic cluster analysis was performed on the deduced aa sequence. Comparison of this analysis with those of 30 other cellulase sequences belonging to six different families indicated that the X. c. campestris enzyme can be classified in family A. The two aa residues which had previously been identified as 'potentially catalytic' within this family of cellulases, are conserved in the X. c. campestris ENGXCA.     

Characterization and structure of an endoglucanase gene cenA of Cellulomonas fimi

Two BamHI fragments (0.8 and 5.2 kb) of Cellulomonas fimi containing an endoglucanase (Eng) gene (cenA) were individually cloned into the BamHI site of pBR322; they expressed carboxymethylcellulase activity in Escherichia coli. The nucleotide (nt) sequence of the cenA gene was determined by sequencing overlapping deletions. The cenA gene is 1350 bp long encoding a polypeptide of 449 amino acids (aa) and stop codon. The 0.8-kb BamHI component encodes the first 76 aa, whereas the 5.2-kb BamHI component encodes the rest of the Eng. The Eng lacking the N-terminal 76 aa retains its activity and antigenicity, and it forms an active fusion protein with the N-terminal portion of the TcR determinant. The C-terminal region of the Eng is crucial for activity and a deletion of as little as 12 aa from that end results in the loss of all Eng activity. The N-terminal 31 aa of the Eng constitute a leader peptide which appears to be functional in exporting the enzyme to the periplasm in E. coli.     

Crystal structure of a cohesin module from Clostridium cellulolyticum: implications for dockerin recognition

In the assembly of the Clostridium cellulolyticum cellulosome, the multiple cohesin modules of the scaffolding protein CipC serve as receptors for cellulolytic enzymes which bear a dockerin module. The X-ray structure of a type I C. cellulolyticum cohesin module (Cc-cohesin) has been solved using molecular replacement, and refined at 2.0 A resolution. Despite a rather low sequence identity of 32 %, this module has a fold close to those of the two Clostridium thermocellum cohesin (Ct-cohesin) modules whose 3D structures have been determined previously. Cc-cohesin forms a dimer in the crystal, as do the two Ct-cohesins. We show here that the dimer exists in solution and that addition of dockerin-containing proteins dissociates the dimer. This suggests that the dimerization interface and the cohesin/dockerin interface may overlap. The nature of the overall surface and of the dimer interface of Cc-cohesin differ notably from those of the Ct-cohesin modules, being much less polar, and this may explain the species specificity observed in the cohesin/dockerin interaction of C. cellulolyticum and C. thermocellum. We have produced a topology model of a C. cellulolyticum dockerin and of a Cc-cohesin/dockerin complex using homology modeling and available biochemical data. Our model suggests that a special residue pair, already identified in dockerin sequences, is located at the center of the cohesin surface putatively interacting with the dockerin.     

The Clostridium cellulolyticum dockerin displays a dual binding mode for its cohesin partner

The plant cell wall degrading apparatus of anaerobic bacteria includes a large multienzyme complex termed the "cellulosome." The complex assembles through the interaction of enzyme-derived dockerin modules with the multiple cohesin modules of the noncatalytic scaffolding protein. Here we report the crystal structure of the Clostridium cellulolyticum cohesin-dockerin complex in two distinct orientations. The data show that the dockerin displays structural symmetry reflected by the presence of two essentially identical cohesin binding surfaces. In one binding mode, visualized through the A16S/L17T dockerin mutant, the C-terminal helix makes extensive interactions with its cohesin partner. In the other binding mode observed through the A47S/F48T dockerin variant, the dockerin is reoriented by 180 degrees and interacts with the cohesin primarily through the N-terminal helix. Apolar interactions dominate cohesin-dockerin recognition that is centered around a hydrophobic pocket on the surface of the cohesin, formed by Leu-87 and Leu-89, which is occupied, in the two binding modes, by the dockerin residues Phe-19 and Leu-50, respectively. Despite the structural similarity between the C. cellulolyticum and Clostridium thermocellum cohesins and dockerins, there is no cross-specificity between the protein partners from the two organisms. The crystal structure of the C. cellulolyticum complex shows that organism-specific recognition between the protomers is dictated by apolar interactions primarily between only two residues, Leu-17 in the dockerin and the cohesin amino acid Ala-129. The biological significance of the plasticity in dockerin-cohesin recognition, observed here in C. cellulolyticum and reported previously in C. thermocellum, is discussed.     

Identification of the cellulose-binding domain of the cellulosome subunit S1 from Clostridium thermocellum YS

The 3' region of a gene designated cipB, which shows strong homology with cipA that encodes the cellulosome SL subunit of Clostridium thermocellum ATCC 27405, was isolated from a gene library of C. thermocellum strain YS. The truncated S1 protein encoded by the cipB derivative bound tightly to cellulose. The cellulose-binding domain in this polypeptide consisted of a C-terminal proximal 167 residue sequence which showed complete identity with residues 337-503 of mature SL from C. thermocellum strain ATCC 27405. The cellulose-binding domain interacted with both crystalline and amorphous cellulose, but not with xylan.     

Common and variable domains of the flagellin gene, flaA, in Campylobacter jejuni

The organization of the flagellin gene locus in Campylobacter jejuni strain IN1 (Lior 7) was determined using the polymerase chain (PCR) reaction and a series of oligonucleotide primers. Two tandemly arranged flagellin genes of approximately 1.7 kb were found to be joined by an intervening segment of c.0.2kb, similar to that reported for Campylobacter coli. The 5' flagellin gene, flaA, was generated by PCR and both strands sequenced. Comparison of the deduced amino acid sequence for C. jejuni FlaA with the published sequence for C. jejuni FlaA with the published sequence for C. coli FlaA showed 77% identical amino acids between the proteins. Two common regions, C1 and C2, comprising the N-terminal 170 amino acids and C-terminal 100 amino acids, exhibit amino acids 94% and 96% identical to those of C. coli, respectively. The variable region, V1, comprising the middle of the protein, shows 61% identical residues with C. coli. Comparison of these regions with other bacterial flagellins reveals a similar pattern but with much less identity. Several areas within the V1 region correspond to predicted surface-exposed regions and may represent areas in which surface epitopes are located.     

Nucleotide sequence of the celG gene of Clostridium thermocellum and characterization of its product, endoglucanase CelG.

The nucleotide sequence of the celG gene of Clostridium thermocellum, encoding endoglucanase CelG, was determined. The open reading frame extended over 1,698 bp and encoded a 566-amino-acid polypeptide (molecular weight of 63,128) similar to the C. thermocellum endoglucanase CelB (51.5% identical residues). The N terminus displayed a typical signal peptide, followed by a catalytic domain. The C terminus, which was separated from the catalytic domain by a 25-amino-acid segment rich in Pro, Thr, and Ser, contained two conserved stretches of 22 amino acids closely similar to those previously described in other cellulases from the same organism. Expression of the gene in Escherichia coli was increased by fusing the fragment coding for the catalytic domain in frame with the start of the lacZ' gene present in the vector. A low- and a high-M(r) form of the protein were purified. The two forms displayed identical enzymatic properties. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed that both forms consist of a major polypeptide of M(r) 50,000 and two minor polypeptides of M(r)s 49,000 and 48,000, resulting from heterogeneous proteolytic cleavage at the C terminus. An antiserum raised against the forms purified from E. coli reacted with an immunoreactive polypeptide of M(r) 66,000, which was associated with the extracellular cellulolytic complex of C. thermocellum known as the cellulosome.     

Sequence of xynC and properties of XynC, a major component of the Clostridium thermocellum cellulosome.

The nucleotide sequence of the Clostridium thermocellum F1 xynC gene, which encodes the xylanase XynC, consists of 1,857 bp and encodes a protein of 619 amino acids with a molecular weight of 69,517. XynC contains a typical N-terminal signal peptide of 32 amino acid residues, followed by a 165-amino-acid sequence which is homologous to the thermostabilizing domain. Downstream of this domain was a family 10 catalytic domain of glycosyl hydrolase. The C terminus separated from the catalytic domain by a short linker sequence contains a dockerin domain responsible for cellulosome assembly. The N-terminal amino acid sequence of XynC-II, the enzyme purified from a recombinant Escherichia coli strain, was in agreement with that deduced from the nucleotide sequence although XynC-II suffered from proteolytic truncation by a host protease(s) at the C-terminal region. Immunological and N-terminal amino acid sequence analyses disclosed that the full-length XynC is one of the major components of the C. thermocellum cellulosome. XynC-II was highly active toward xylan and slightly active toward p-nitrophenyl-beta-D-xylopyranoside, p-nitrophenyl-beta-D-cellobioside, p-nitrophenyl-beta-D-glucopyranoside, and carboxymethyl cellulose. The Km and Vmax values for xylan were 3.9 mg/ml and 611 micromol/min/mg of protein, respectively. This enzyme was optimally active at 80 degrees C and was stable up to 70 degrees C at neutral pHs and over the pH range of 4 to 11 at 25 degrees C.