Quantitative detection of E. coli O157:H7 eaeA gene using quantum dots and magnetic particles

A quantitative gene detection technique targeting the pathogenic E. coli O157:H7 eaeA gene was developed using magnetic bead (MB)-quantum dots (QDs) nanoparticle complexes. MBs allowed for the separation of DNA-conjugated QD nanoparticles via magnetic field manipulation. QDs provided internal fluorescence calibration to account for the intrinsically different numbers of nanoparticles interrogated in each assay. Based on the measurement of normalized fluorescence (Cy3/QD₆₅₅), the linear quantification ranges of ssDNA and dsDNA targets were determined to be 10 through 10³ fM (R² = 0.992) and 2 × 10² through 6 × 10⁷ gene copies (R² = 0.972), with detection limits of 9.72 fM and 10⁴ gene copies, respectively. The kinetic results indicate that adjustment of hybridization temperature in accordance to the amount of target DNA was required to maximize the efficiency of DNA hybridization. We were able to discriminate perfectly matched target DNA, 1-, 2-, and 41-base pair mismatched target DNAs in our approach and therefore demonstrated excellent selectivity. Our technique was also used on pure bacterial culture to showcase its ability to analyze environmental samples.     

Aptamer-based bio-barcode assay for the detection of cytochrome-c released from apoptotic cells

The recently developed bio-barcode (BBC) assay using polymerase chain reaction (PCR) to generate signals has been shown to be an extraordinarily sensitive method to detect protein targets. The BBC assay involves a magnetic microparticle (with antibody to capture the target of interest) and gold nanoparticle (with recognition antibody and thiolated single-stranded barcode DNAs) to form a sandwich around the target. The concentration of target is determined by the amount of barcode DNA released from the nanoparticles. Here we describe a modification using aptamers to substitute the gold nanoparticles for the BBC assay. In this study, we isolated a 76-mer monoclonal aptamer against cytochrome-c (cyto-c) and this single-stranded DNA in defined 3D structure for cyto-c was used in the BBC assay for both recognition and readout reporting. After magnetic separation, the aptamer was amplified by PCR and this aptamer-based barcode (ABC) assay was sensitive enough to detect the cyto-c in culture medium released from the apoptotic cells after drug treatment at the picomolar level. When compared to the conventional cyto-c detection by Western blot analysis, our ABC assay is sensitive, and time for the detection and quantification with ready-made probes was only 3 h.     

Ultrasensitive electrochemical detection of Bacillus thuringiensis transgenic sequence based on in situ Ag nanoparticles aggregates induced by biotin-streptavidin system

A novel electrochemical biosensor was developed for detecting short DNA oligonucleotide of Bacillus thuringiensis (Bt) transgenic sequence based on Ag nanoparticle aggregates. To fabricate this DNA biosensor, the thiol-modified capture DNA (cDNA) was first anchored on gold (Au) electrode, and then the target DNA (tDNA) was hybridized with the immobilized cDNA. Subsequently, the probe DNA (pDNA) functionalized by biotinylated Ag nanoparticle was associated with the fixed tDNA, and the single Ag nanoparticle label was obtained (cited as SAg label). Finally, dissociative biotinylated Ag nanoparticle was bound to the resultant biotinylated SAg label assembled on Au electrode by virtue of bridge molecule streptavidin (SA) through biotin-SA specific interaction, which could lead to in situ aggregate of Ag nanoparticles on Au electrode and induce a novel tag including multiple Ag nanoparticles (cited as MAg tag). The novel tag exhibited excellent electroactive property in the solid-state Ag/AgCl process and was successfully applied to Bt transgenic sequence assay. A detection limit of 10 fM was achieved, which was improved by three orders of magnitude as compared to the SAg label. Furthermore, this novel DNA biosensor demonstrated a good selectivity towards tDNA.     

Enhancement of DNA immobilization and hybridization on gold electrode modified by nanogold aggregates

Gold electrodes modified by nanogold aggregates (nanogold electrode) were obtained by the electrodeposition of gold nanoparticles onto planar gold electrode. The Electrochemical response of single-stranded DNA (ssDNA) probe immobilization and hybridization with target DNA was measured by cyclic voltammograms (CV) using methylene blue (MB) as an electroactive indicator. An improving method using long sequence target DNA, which greatly enhanced the response signal during hybridization, was studied. Nanogold electrodes could largely increase the immobilization amount of ssDNA probe. The hybridization amount of target DNA could be increased several times for the manifold nanogold electrodes. The detection limit of nanogold electrode for the complementary 16-mer oligonucleotide (target DNA1) and long sequence 55-mer oligonucleotide (target DNA2) could reach the concentration of 10(-9) mol/L and 10(-11) mol/L, respectively, which are far more sensitive than that of the planar electrode.     

Rapid and simple detection of PCR product DNA: a comparison between Southern hybridization and fluorescence polarization analysis

The essential aim of this study was to compare two different methods, Southern hybridization and fluorescence polarization (FP) assay. They both detect specific hybridization and were examined using common asymmetric PCR products and probes. FP assay clearly showed the hybridization of probe DNAs with the asymmetric PCR products of their target genes. Southern blot patterns presented excellent consistency with the results of FP assay. In both methods, two types of Shiga toxin (vero toxin) genes held in enterohaemorrhagic Escherichia coli (EHEC) were used as target genes. For detection of the two genes, stx1 and stx2, two respective DNA probes were synthesized. Both in FP assay and in Southern hybridization, the probe for stx1 hybridized only with the product of stx1 and vice versa. The results of the DNA detection using different methods were completely in agreement. Moreover, FP assay makes it possible to detect the hybridization rapidly. In our high NaCl concentration condition, hybridization between the probes and the asymmetric PCR products could be monitored within about 15min.     

Using oligonucleotide-functionalized Au nanoparticles to rapidly detect foodborne pathogens on a piezoelectric biosensor

A circulating-flow piezoelectric biosensor, based on an Au nanoparticle amplification and verification method, was used for real-time detection of a foodborne pathogen, Escherichia coli O157:H7. A synthesized thiolated probe (Probe 1; 30-mer) specific to E. coli O157:H7 eaeA gene was immobilized onto the piezoelectric biosensor surface. Hybridization was induced by exposing the immobilized probe to the E. coli O157:H7 eaeA gene fragment (104-bp) amplified by PCR, resulting in a mass change and a consequent frequency shift of the piezoelectric biosensor. A second thiolated probe (Probe 2), complementary to the target sequence, was conjugated to the Au nanoparticles and used as a "mass enhancer" and "sequence verifier" to amplify the frequency change of the piezoelectric biosensor. The PCR products amplified from concentrations of 1.2 x 10(2) CFU/ml of E. coli O157:H7 were detectable by the piezoelectric biosensor. A linear correlation was found when the E. coli O157:H7 detected from 10(2) to 10(6) CFU/ml. The piezoelectric biosensor was able to detect targets from real food samples.     

Gold coated ferric oxide nanoparticles based disposable magnetic genosensors for the detection of DNA hybridization processes

In this article, a disposable magnetic DNA sensor using an enzymatic amplification strategy for the detection of specific hybridization processes, based on the coupling of streptavidin-peroxidase to biotinylated target sequences, has been developed. A thiolated 19-mer capture probe was attached to gold coated ferric oxide nanoparticles and hybridization with the biotinylated target was allowed to proceed. Then, a streptavidin-peroxide was attached to the biotinylated target and the resulting modified gold coated ferric oxide nanoparticles were captured by a magnetic field on the surface of a home-made carbon screen printed electrode (SPE). Using hydroquinone as a mediator, a square wave voltammetric procedure was chosen to detect the hybridization process after the addition of hydrogen peroxide. Different aspects concerning the assay protocol and nanoparticles fabrication were optimized in order to improve the sensitivity of the developed methodology. A low detection limit (31 pM) with good stability (RSD=7.04%, n=10) was obtained without the need of polymerase chain reaction (PCR) amplification.     

Enhanced photoelectrochemical method for linear DNA hybridization detection using Au-nanopaticle labeled DNA as probe onto titanium dioxide electrode

A photoelectrochemical method was proposed to detect DNA hybridization using Au nanoparticle modified DNA as one probe on TiO2 substrate, in which the TiO2 substrate was used not only as DNA anchors but also as the signal transducers. Hybridization between the probe and the target DNA oligonucleotides was confirmed by the decreased photocurrent of the TiO2 electrode. Compared with non-label probe, Au nanoparticles enhanced the photocurrent shifts after the hybridization. The photocurrent decreased with increasing the concentration of target DNA, indicating that this method could be used for quantitative measurements, and the discrimination of the complementary from mismatched DNA. Furthermore, the hybridization binding constant was obtained and photocurrent generation mechanism was discussed. The major advantages of this photochemical method are speed, simplicity and excellent specificity. This method provides a platform for studying a wide variety of biological processes using photoelectrochemical method.     

Oligonucleotide-modified screen-printed gold electrodes for enzyme-amplified sensing of nucleic acids

An electrochemical genosensor for the detection of specific sequences of DNA has been developed using disposable screen-printed gold electrodes. Screen-printed gold electrodes were firstly modified with a mixed monolayer of a 25-mer thiol-tethered DNA probe and a spacer thiol, 6-mercapto-1-hexanol (MCH). The DNA probe sequence was internal to the sequence of the 35S promoter, which sequence is inserted in the genome of GMOs regulating the transgene expression. An enzyme-amplified detection scheme, based on the coupling of a streptavidin-alkaline phosphatase conjugate and biotinylated target sequences was then applied. The enzyme catalysed the hydrolysis of the electroinactive alpha-naphthyl phosphate to alpha-naphthol; this product is electroactive and has been detected by means of differential pulse voltammetry. The assay was, firstly, characterised using synthetic oligonucleotides. Relevant parameters, such as the probe concentration and the immobilisation time, the use of the MCH and different enzymatic conjugates, were investigated and optimised. The genosensor response was found to be linearly related to the target concentration between 0 and 25 nmol/L; the detection limit was 0.25 nmol/L. The analytical procedure was then applied for the detection of the 35S promoter sequence, which was amplified from the pBI121 plasmid by polymerase chain reaction (PCR). Hybridisation conditions (i.e., hybridisation buffer and hybridisation time) were further optimised. The selectivity of the assay was confirmed using biotinylated non-complementary amplicons and PCR blanks. The results showed that the genosensor enabled sensitive (detection limit: 1 nmol/L) and specific detection of GMO-related sequences, thus providing a useful tool for the screening analysis of bioengineered food samples.     

A label-free electrochemical DNA sensor based on exonuclease III-aided target recycling strategy for sequence-specific detection of femtomolar DNA

The present work demonstrates a rapid, single-step and ultrasensitive label-free and signal-off electrochemical sensor for specific DNA detection with excellent discrimination ability for single-nucleotide polymorphisms, taking advantage of Exonuclease III (Exo III)-aided target recycling strategy to achieve signal amplification. Exo III has a specifical exo-deoxyribonuclease activity for duplex DNAs in the direction from 3' to 5' terminus, however its activity on the duplex DNAs with 3'-overhang and single-strand DNA is limited. In response to the specific features of Exo III, the proposed E-DNA sensor is designed such that, in the presence of target DNA, the electrode self-assembled signaling probe hybridizes with the target DNA to form a duplex in the form of a 3'-blunt end at signaling probe and a 3'-overhang end at target DNA. In this way, Exo III specifically recognizes this structure and selectively digests the signaling probe. As a result, the target DNA dissociates from the duplex and recycles to hybridize with a new signaling probe, leading to the digestion of a large amount of signaling probes gradually. A redox mediator, Ru(NH(3))(6)(3+) (RuHex) is employed to electrostatically adsorbed onto signaling probes, which is directly related to the amount and the length of the signaling probes remaining in the electrode, and provides a quantitative measure of sequence-specific DNA with the experimentally measured (not extrapolated) detection limit as low as 20 fM. Moreover, this E-DNA sensor has an excellent differentiation ability for single mismatches with fairly good stability.     

Quantitative detection of Sphingomonaschlorophenolica in soil via competitive polymerase chain reaction

The 16S ribosomal RNA gene sequence of the pentachlorophenol degrader Sphingomonas chlorophenolica strain RA2 was used to generate specific polymerase chain reaction (PCR) primers for the detection of this strain in soil, whereas a region internal to the two primers was used to provide an S. chlorophenolica strain RA2-specific oligonucleotide probe. The PCR detection system resulted in a 727 bp product detectable via gel electrophoresis and hybridization. It was specific for strain RA2 and its close relative, S. chlorophenolica ATCC 39723, as evidenced by PCR amplifications of a range of bacterial genomic DNAs. Tests of total microbial community DNA obtained from five uninoculated and two RA2-inoculated soils confirmed this specificity for introduced S. chlorophenolica RA2. Strain RA2 could be detected in soil down to a level of 10³ cfu g⁻¹ soil. Two strategies were followed to generate internal standard DNA for competitive PCR. First, a 479 bp MIMICS fragment was obtained based on a previously constructed gene cassette; however, this standard did not reliably quantify RA2 targets. Low stringency PCR performed with a range of bacterial genomic DNAs resulted in the generation of an amplicon with a Paenibacillus azotofixans strain that was slightly smaller than the RA2-derived product. Both products were easily separable via conventional gel electrophoresis. The use of this competitor in a threefold dilution scheme applied to the target DNA allowed for the quantitative detection of RA2-specific target DNA molecules from pure culture and from soil. The fate of strain RA2 in pentachlorophenol-contaminated soil was described using this competitive PCR approach, and the organism was shown to persist at two inoculum levels over prolonged periods of time.     

Introduction of hematoxylin as an electroactive label for DNA biosensors and its employment in detection of target DNA sequence and single-base mismatch in human papilloma virus corresponding to oligonucleotide

For the detection of DNA hybridization, a new electrochemical biosensor was developed on the basis of the interaction of hematoxylin with 20-mer deoxyoligonucleotides (from human papilloma virus, HPV). The study was performed based on the interaction of hematoxylin with an alkanethiol DNA probe self-assembled gold electrode (ss-DNA/AuE) and its hybridization form (ds-DNA/AuE). The optimum conditions were found for the immobilization of HPV probe on the gold electrode (AuE) surface and its hybridization with the target DNA. Electrochemical detection of the self-assembled DNA and the hybridization process were performed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) over the potential range where the accumulated hematoxylin at the modified electrode was electroactive. Observing a remarkable difference between the voltammetric signals of the hematoxylin obtained from different hybridization samples (non-complementary, mismatch and complementary DNAs), we confirmed the potential of the developed biosensor in detecting and discriminating the target complementary DNA from non-complementary and mismatch oligonucleotides. Under optimum conditions, the electrochemical signal had a linear relationship with the concentration of the target DNA ranging from 12.5 nM to 350.0 nM, and the detection limit was 3.8 nM.     

A nucleic acid biosensor for the detection of a short sequence related to the hepatitis B virus using bis(benzimidazole)cadmium(II) dinitrate as an electrochemical indicator

A novel hybridization indicator, bis(benzimidazole)cadmium(II) dinitrate (Cd(bzim)(2)(NO(3))(2)), was utilized to develop an electrochemical DNA biosensor for the detection of a short DNA sequence related to the hepatitis B virus (HBV). The sensor relies on the immobilization and hybridization of the 21-mer single-stranded oligonucleotide from the HBV long repeat at the glassy carbon electrode (GCE). The hybridization between the probe and its complementary sequence as the target was studied by enhancement of the peak of the Cd(bzim)(2)(2+) indicator using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Numerous factors affecting the probe immobilization, target hybridization, and indicator binding reactions were optimized to maximize the sensitivity and speed of the assay time. With this approach, a sequence of the HBV could be quantified over the range from 1.49x10(-7)M to 1.06x10(-6)M, with a linear correlation of r=0.9973 and a detection limit of 8.4x10(-8)M. The Cd(bzim)(2)(2+) signal observed from the probe sequence before and after hybridization with a four-base mismatch containing sequence was lower than that observed after hybridization with a complementary sequence, showing good selectivity. These results demonstrate that the Cd(bzim)(2)(2+) indicator provides great promise for the rapid and specific measurement of the target DNA.     

DNA probe functionalized QCM biosensor based on gold nanoparticle amplification for Bacillus anthracis detection

The rapid detection of Bacillus anthracis, the causative agent of anthrax disease, has gained much attention since the anthrax spore bioterrorism attacks in the United States in 2001. In this work, a DNA probe functionalized quartz crystal microbalance (QCM) biosensor was developed to detect B. anthracis based on the recognition of its specific DNA sequences, i.e., the 168 bp fragment of the Ba813 gene in chromosomes and the 340 bp fragment of the pag gene in plasmid pXO1. A thiol DNA probe was immobilized onto the QCM gold surface through self-assembly via Au-S bond formation to hybridize with the target ss-DNA sequence obtained by asymmetric PCR. Hybridization between the target DNA and the DNA probe resulted in an increase in mass and a decrease in the resonance frequency of the QCM biosensor. Moreover, to amplify the signal, a thiol-DNA fragment complementary to the other end of the target DNA was functionalized with gold nanoparticles. The results indicate that the DNA probe functionalized QCM biosensor could specifically recognize the target DNA fragment of B. anthracis from that of its closest species, such as Bacillus thuringiensis, and that the limit of detection (LOD) reached 3.5 × 10(2)CFU/ml of B. anthracis vegetative cells just after asymmetric PCR amplification, but without culture enrichment. The DNA probe functionalized QCM biosensor demonstrated stable, pollution-free, real-time sensing, and could find application in the rapid detection of B. anthracis.     

SNP detection for cytochrome P450 alleles by target-assembled tandem oligonucleotide systems based on exciplexes

We report the first use of exciplex-based split-probes for detection of the wild type and *3 mutant alleles of human cytochrome P450 2C9. A tandem 8-mer split DNA oligonucleotide probe system was designed that allows detection of the complementary target DNA sequence. This exciplex-based fluorescence detector system operates by means of a contiguous hybridization of two oligonucleotide exciplex split-probes to a complementary target nucleic acid target. Each probe oligonucleotide is chemically modified at one of its termini by a potential exciplex-forming partner, each of which is fluorescently silent at the wavelength of detection. Under conditions that ensure correct three-dimensional assembly, the chemical moieties on suitable photoexcitation form an exciplex that fluoresces with a large Stokes shift (in this case 130 nm). Preliminary proof-of-concept studies used two 8-mer probe oligonucleotides, but in order to give better specificity for genomic applications, probe length was extended to give coverage of 24 bases. Eight pairs of tandem 12-mer oligonucleotide probes spanning the 2C9*3 region were designed and tested to find the best set of probes. Target sequences tested were in the form of (i) synthetic oligonucleotides, (ii) embedded in short PCR products (150 bp), or (iii) inserted into plasmid DNA (approximately 3 Kbp). The exciplex system was able to differentiate wild type and human cytochrome P450 2C9 *3 SNP (1075 A-->C) alleles, based on fluorescence emission spectra and DNA melting curves, indicating promise for future applications in genetic testing and molecular diagnostics.     

Hybridization signal enhancement via long-stranded probe for detection of DNA using aquadichloro (benzimidazole)-copper(II) as hybridization indicator

A simple and sensitive method for electrochemical detection of DNA was designed. This DNA sensor was based on a "sandwich" detection strategy, which involved a long capture probe DNA immobilized on glassy carbon electrodes that flanked both the reference DNA and target DNA. Electrochemical signals were measured by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) using aquadichloro(benzimidazole)-copper(II), Cu(bzim)(H(2)O)Cl(2), as an electroactive indicator. An improving amount of Cu(bzim)(H(2)O)Cl(2) was interacted with the hybrid DNA via the incorporation of a long-probe DNA and a reference DNA in this sensor. As a result of this effect, this sensor design significantly enhanced the sensitivity. With 48-mer probe DNA and 27-mer reference DNA, the proposed method could be used for detection of 21-mer ssDNA ranging from 1.32 x 10(-7) to 2.52 x 10(-6) M with a detection limit of 2.94 x 10(-8) M. Electrochemical DNA biosensors were also developed using the same long-probe sequence as the target sequence with the novel hybridization indicator, Cu(bzim) (H(2)O)Cl(2). The detection limits for the complementary 21-mer target and 27-mer target were 9.52 x 10(-8) M and 5.81 x 10(-8) M, respectively. The results showed that the sensor with long-probe DNA and reference DNA is far more sensitive than that with nonswitch assay.     

Target-assembled ExciProbes: application to DNA detection at the level of PCR product and plasmid DNA

Recently, we introduced a novel exciplex-based approach for detection of nucleic acids using a model DNA-mounted exciplex system, consisting of two 8-mer ExciProbes hybridized to a complementary 16-mer DNA target. We now show, for the first time, that this approach can be used to detect DNA at the level of PCR product and plasmid, when the target sequence (5'-GCCAAACACAGAATCG-3') was embedded in long DNA molecules (PCR products and approximately 3 Kbp plasmid). A remarkably stringent demand is made of the solvent conditions for this exciplex emission to occur, viz., emission is optimal for DNA at 80% trifluoroethanol, even in the plasmid situations, raising the question of the molecular structural basis of this system. We show that a perfectly matched plasmid target can be differentiated from target containing single nucleotide substitutions; hence, ExciProbes could be applied to SNP analysis. The effect of counter cations (Na(+), K(+), and Mg(2+)) and PCR additives on exciplex emission has been also examined.     

DNAzyme-functionalized Pt nanoparticles/carbon nanotubes for amplified sandwich electrochemical DNA analysis

A novel DNAzyme-functionalized Pt nanoparticles/carbon nanotubes (DNAzyme/Pt NPs/CNTs) bioconjugate was fabricated as trace tag for ultrasensitive sandwich DNA detection. The Pt NPs/CNTs were prepared via layer-by-layer (LBL) assembly of the Pt NPs and polyelectrolyte on the carboxylated CNTs, followed by the functionalization with the DNAzyme and reporter probe DNA through the platinum-sulfur bonding. The subsequent sandwich-type DNA specific reaction would confine numerous DNAzyme/Pt NPs/CNTs bioconjugate onto the gold electrode surface for amplifying the signal. In the presence of 3,3',5,5' tetramethylbenzidine (TMB) which could be oxidized by the DNAzyme, electrochemical signals could be generated by chronoamperometry via the interrogation of reduction electrochemical signal of oxidized TMB. The constructed DNA sensor exhibited a wide linear response to target DNA ranging from 1.0fM to 10pM with the detection limit down to 0.6fM and exhibited excellent selectivity against even a single base mismatch. In addition, this novel DNA sensor showed fairly good reproducibility, stability, and reusability.     

Tag/hybridization-based sensitive detection of polymerase chain reaction products

The polymerase chain reaction (PCR) is an important technology to amplify a single copy or a few copies of DNA segment in genomic DNAs, visualizing the segment as DNA fragment. Thus, PCR is frequently used in various examinations such as detection of bacteria and fungi in the food industry. Here, we report a simple and sensitive method for detection of PCR products using single-strand tag sequence and hybridization of the tag sequence to the complementary tag sequence immobilized on solid material (STH). The detection sensitivity was found to be at least 50 times higher than electrophoresis/ethidium bromide (EtBr) visualization for approximately a 500-bp fragment and higher than the ordinary hybridization, that is, hybridization of denatured PCR product to probe sequence immobilized on solid material.     

An ultrasensitive supersandwich electrochemical DNA biosensor based on gold nanoparticles decorated reduced graphene oxide

In this article, a supersandwich-type electrochemical biosensor for sequence-specific DNA detection is described. In design, single-strand DNA labeled with methylene blue (MB) was used as signal probe, and auxiliary probe was designed to hybridize with two different regions of signal probe. The biosensor construction contained three steps: (i) capture DNA labeled with thiol was immobilized on the surface of gold nanoparticles decorated reduced graphene oxide (Au NPs/rGO); (ii) the sandwich structure formation contained “capture–target–signal probe”; and (iii) auxiliary probe was introduced to produce long concatamers containing signal molecule MB. Differential pulse voltammetry (DPV) was used to monitor the DNA hybridization event using peak current changes of MB in phosphate-buffered saline (PBS) containing 1.0 M NaClO₄. Under optimal conditions, the peak currents of MB were linear with the logarithm of the concentration of target DNA in the range of 0.1 μM to 0.1 fM with a detection limit of 35 aM (signal/noise = 3). In addition, this biosensor exhibited good selectivity even for single-base mismatched target DNA detection.