Ferrocene labelings as inhibitors and dual electrochemical sensors of human glutathione S-transferase P1-1

The inhibitory and sensor properties of two ferrocene conjugates, in which the ferrocene and glutathione are linked through a spacer arm of different length and chemical structure, on human Pi glutathione S-transferase, were examined by activity assays, ITC, fluorescence spectroscopy and voltammetry. Such ferrocene conjugates are strong competitive inhibitors of this enzyme with an enhanced binding affinity, the one bearing the longest spacer arm being the most potent inhibitor. Voltammetric measurements showed a strong decrease of the peak current intensity and an increase of the oxidation potential upon binding of ferrocene–glutathione conjugates to GST P1-1 showing that both conjugates can be used as dual electrochemical sensors for GST P1-1.     

Peptide-and Biotin-Oligonucleotide-Pyrrole Conjugates for Electrochemical Addressing on Silicon Chip

Abstract

The syntheses of pyrrole-oligonucleotide-peptide conjugates and pyrrole-oligonucleotide-biotin conjugates were described. The oligonucleotide moiety acted as an ?active linker? which allowed the easy purification and quantitation of the conjugates and in turn controlled the grafting. The peptide conjugates were immobilised on silicon array and their immunoreactivity was tested using biotinylated antibodies and a phycoerythrin-streptavidin staining. The biotin conjugate provided a fluorescence scale.     

Design and synthesis of ferrocene probe molecules for detection by electrochemical methods

A series of ferrocenyl conjugates to fatty acids have been designed and synthesized to establish the key properties required for use in biomolecular binding studies. Amperometric detection of the ferrocene conjugates was sought in the region of 0.3 V (vs Ag/AgCl) for use in protein/blood solutions. Different linkers and solubilizing moieties were incorporated to produce a conjugate with optimal electrochemical properties. In electrochemical studies, the linker directly attached to the ferrocene was found to affect significantly the E(1/2) value and the stability of the ferrocenium cation. Ester-linked ferrocene conjugates had E(1/2) ranging from +400 to +410 mV, while amide-linked compounds ranged from +350 to +370 mV and the amines +260 to +270 mV. Folding of long-chain substituents around the ferrocene, also significantly affected by the choice of linker, was inferred as a secondary effect that increased E(1/2). The stability of the ferrocenium cation decreased systematically as E(1/2) increased. Disubstituted ferrocene ester and amide conjugates, with oxidation potentials of +640 and +570 mV, respectively, showed only a barely discernible reduction wave in cyclic voltammetry at 50 mV/s. Electrochemical measurements identified two lead compounds with the common structural characteristics of an amide and carbamate linker (compounds 17 and 21) with a C(11) fatty acid chain attached. It is envisaged that such molecules can be used to mimic and study the biomolecular binding interaction between fatty acids and molecules such as human serum albumin.     

A miniaturised electrochemical affinity assay based on a wall-free sample droplet and micro-dispensing of the redox-labelled binding partner.

An affinity-assay was developed that is based on the modulation of the diffusion coefficient of a redox-labelled hapten upon complementary recognition of the analyte leading to an increase of molecular weight and hence to a decrease of the diffusion coefficient. The slower diffusion is monitored by means of cyclic voltammetry. In order to demonstrate the feasibility of this assay format, recognition of biotin by streptavidin has been chosen as a model system. Labelling of biotin was achieved by covalent binding of a ferrocene derivative to the biotin unit. To reduce the consumption of expensive compounds and to allow automatisation of the assay a novel miniaturised set-up was developed based on a wall-free sample droplet which forms the electrochemical cell with typical volumes of up to 10 microl. This droplet is dispensed by means of a step-motor driven syringe pump through a specially designed electrode holder spanning the gap between a micro-working electrode and a macroscopic counter electrode. By means of a piezo-driven micro-dispenser a predefined number of nano-droplets (100 pl volume each) containing the redox-labelled hapten are shot into the sample droplet. By this, any physical contact and hence any cross-contamination between the sample and the reagent solution could be avoided. Signal amplification can be achieved by redox recycling between the micro-electrode and the perpendicular positioned macroscopic counter electrode.     

Synthesis of biotinylated glycoconjugates and their use in a novel ELISA for direct comparison of HIV-1 Gp120 recognition of GalCer and related carbohydrate analogues

As part of our program directed toward the design and synthesis of high-affinity ligands for the GalCer-binding site on the HIV cell surface glycoprotein, gp120, we required a reliable method for qualitatively assessing relative binding affinities for related analogues. Due to the hydrophilic nature of these synthetic conjugates, difficulties were encountered with typical ELISA methods, which rely upon hydrophobic interactions to anchor the ligand to a microtiter plate. Other types of assays were also problematic due to nonspecific binding of gp120. Therefore, we developed a general method for plating water-soluble ligands on microtiter plates using biotin/NeutrAvidin recognition for adhesion. A water-soluble GalCer analogue was prepared by conjugating psychosine to biotin using a novel tetraethylene glycol linker. In a similar manner, LacCer and GlcCer analogues were prepared and these conjugates were plated into microtiter wells containing NeutrAvidin. Unoccupied sites were blocked using biotin functionalized as a primary amide. Gp120 binding to galactosyl sphingosine, GalSph (19), GlcSph (22), and LacSph (23) conjugates was assessed through incubation with recombinant HRP-gp120. It was determined that LacSph has the strongest interaction with gp120. The binding affinities of GalSph and GlcSph were similar to each other and less strong than LacSph. These data contradict earlier studies where HPTLC showed that LacCer and GlcCer do not significantly bind gp120. They also contradict liposome-based assays that reported psychosine is not recognized by gp120. The extent of plating for each biotinylated molecule was quantified using HRP-biotin, allowing direct comparison of ligand plating efficiencies for the first time. Several other synthetic biotin conjugates were prepared and tested, demonstrating the feasibility of performing ELISA on water-soluble ligands.     

Immunosensor for Mycobacterium tuberculosis on screen-printed carbon electrodes

In this work, two methods have been compared to produce enzymatic voltammetric immunosensors for the determination of Mycobacterium tuberculosis antigens (Ag360 and Ag231), using a pre-oxidised screen-printed carbon electrode (SPCE) as a signal transduction element. The enzyme alkaline phosphatase (AP) was used in combination with the substrate 3-indoxyl phosphate (3-IP). In one design, the immune complexes between M. tuberculosis antigens and monoclonal antibodies against M. tuberculosis were formed out of the electrode surface. Then, the immune complexes were captured by biotinylated rabbit anti-M. tuberculosis antibodies, immobilised on the streptavidin modified SPCEs through the streptavidin:biotin reaction. Finally, an alkaline phosphatase (AP) labelled rabbit IgG anti-mouse immunoglobulin G was used as a detector antibody. In the other design, the M. tuberculosis antigens were captured by monoclonal antibodies against M. tuberculosis, which were immobilised on the electrode surface through the reaction with rabbit IgG passively adsorbed on the SPCEs. The biotinylated rabbit anti-M. tuberculosis antibodies were used with an alkaline phosphatase labelled streptavidin as detector antibodies. The best results for M. tuberculosis antigen determination were obtained using the immunosensor on the streptavidin modified SPCEs and the immune complexes between antigen Ag231 and monoclonal antibodies MabF184-3, with a detection limit of 1.0 ng/ml. The immunosensor was also applied to Ag231 spiked proteic matrices.     

Mechanistic investigation of smart polymer-protein conjugates

Many affinity separation and diagnostic applications rely upon both capture and release steps. There is thus a need for methods to enhance the reversibility of biomolecular interactions. We have previously demonstrated that stimuli-responsive polymers can be used to gate biomolecular reactions when conjugated near the active site of proteins. Here we have used a new smart polymer, N,N-dimethyl acrylamide-co-4-phenylazophenylacrylate that has allowed a mechanistic investigation of the smart polymer switches. This polymer was conjugated via a vinyl sulfone terminus to cysteine residues of genetically engineered streptavidin mutant E116C, where the polymer is conjugated close to the biotin-binding site, and streptavidin mutant S139C, where the conjugation site is distant. The biotin binding switching activity was strongly dependent on conjugation position, as the E116C conjugate displayed a large thermal response while the S139C conjugate displayed only small effects. Kinetic measurements of biotin release demonstrated that the off-rate of biotin was unperturbed and that the thermally triggered release of biotin with the E116C conjugate was due to the blocking the reassociation of biotin. The addition of free polymer to purified E116C conjugates was also shown to increase the blocking and release properties of the switch. This effect was site dependent, suggesting that the conjugated polymers were directing a physical aggregation near the binding site that effectively enhanced the switching activity. These investigations provide mechanistic insight that can be utilized to design better molecular switches for a variety of stimuli-responsive polymer-protein conjugates.     

Biotin-4-fluorescein based fluorescence quenching assay for determination of biotin binding capacity of streptavidin conjugated quantum dots

The valency of quantum dot nanoparticles conjugated with biomolecules is closely related to their performance in cell tagging, tracking, and imaging experiments. Commercially available streptavidin conjugates (SAv QDs) are the most commonly used tool for preparing QD-biomolecule conjugates. The fluorescence quenching of biotin-4-fluorscein (B4F) provides a straightforward assay to quantify the number of biotin binding sites per SAv QD. The utility of this method was demonstrated by quantitatively characterizing the biotin binding capacity of commercially available amphiphilic poly(acrylic acid) Qdot ITK SAv conjugates and poly(ethylene glycol) modified Qdot PEG SAv conjugates with emission wavelengths of 525, 545, 565, 585, 605, 625, 655, 705, and 800 nm. Results showed that 5- to 30-fold more biotin binding sites are available on ITK SAv QDs compared to PEG SAv QDs of the same color with no systematic variation of biotin binding capacity with size.     

Probing the adenosine receptor with adenosine and xanthine biotin conjugates

Biotin-containing analogs of a potent agonist (N6-phenyladenosine) and a potent antagonist (1,3-dipropyl-8-phenylxanthine) of adenosine receptor activity have been synthesized. A spacer chain to the biotin moiety is attached in both cases to the para-position of the phenyl ring. Two biotin conjugates of N6-phenyladenosine differing only in the length of the spacer chain bind to the adenosine receptor and to avidin simultaneously. The shorter-chain derivative was more potent in inhibiting binding of N6-[3H]cyclohexyladenosine to rat cerebral cortical membranes (Ki of 11 nM in the absence of avidin, 36 nM for the avidin complex). Three biotin conjugates of 1,3-dipropyl-8-phenylxanthine bound competitively to the adenosine receptor, but only in the absence of avidin. The results are interpreted in terms of the possible orientation of the ligands at the receptor binding site.     

Development of a one-step immunochromatographic strip test for the detection of sennosides A and B

An immunochromatographic strip test was developed to detect sennoside A (1) and sennoside B (2) using anti-1 and anti-2 monoclonal antibodies. The qualitative assay was based on a competitive immunoassay in which the detector reagent consisted of colloidal gold particles coated with the respective sennoside antibodies. The capture reagents were 1- and 2-human serum albumin (HSA) conjugates immobilised on a nitrocellulose membrane on the test strip. The sample containing 1 and 2, together with detector reagent, passed over the zone where the capture reagents had been immobilised. The analytes in the sample competed for binding to the limited amount of antibodies in the detector reagent with the immobilised 1- and 2-HSA conjugates on the membrane and hence positive samples showed no colour in the capture spot zone. Detection limits for the strip test were 125 ng/mL for both sennosides. The assay system is useful as a rapid and simple screening method for the detection of 1 and 2 in plants, drugs and body fluids.     

Bioelectrocatalyzed signal amplification for affinity interactions at chemically modified electrodes

A comparative study was performed to evaluate the signal amplification strategies in electrochemical affinity sensing, which included the direct electron transfer and diffusible-group mediated electron transfer between label enzymes that were specifically bound to target proteins and chemically modified electrode surfaces. As a platform surface for affinity recognition reactions, a double functionalized poly(amido amine) dendrimer monolayer that was modified with ferrocene and biotin groups was constructed on a gold surface. With the chemically modified electrode, a model affinity sensing with avidin was investigated. The advantages of adopting the diffusible-group mediated signaling strategy were demonstrated in terms of signal sensitivity and stability.     

Rate-limiting mass transfer in immunosorbents: characterisation of the adsorption of paraquat-protein conjugates to anti-paraquat Sepharose 4B

A series of paraquat-protein conjugates of different molecular size has been prepared by the coupling of paraquat hexanoate to the proteins lysozyme, ovalbumin, bovine serum albumin. The characteristics of the adsorption of these conjugates to an immunosorbent consisting of monoclonal anti-paraquat antibodies covalently immobilised to Sepharose 4B have been determined. Equilibrium adsorption isotherms were found to obey the Langmuir equation and indicated that 80% or more of the antibody binding sites were accessible to the conjugates. The rates of mass transfer of the conjugates to their adsorption sites on the immobilised antibodies was well described by a model in which mass transfer is controlled by transfer across the external film and diffusion within the porous adsorbent bead. The effective diffusivities of the conjugates within the immunosorbent were measured and has allowed the effect of the size of the adsorbing molecule on the rate of adsorption to be considered. The amount of paraquat that could be adsorbed and the rates of adsorption decreased as the size of the protein to which it is conjugated increased. The diffusivity of the conjugates within the pores of the adsorbent is reduced between two and five times compared to their diffusivities in free solution. The reduction is greater for the larger proteins and the variations of the effective diffusivities and the pore diffusivities with the molecular weight of the conjugate can be well described with simple correlations.     

Wiring of PQQ-dehydrogenases

The performance of pyrroloquinoline quinone (PQQ) dependent alcohol dehydrogenase (ADH) and two types of PQQ-glucose dehydrogenases in solution and when immobilized on the carbon paste electrodes modified with ferrocene derivatives is investigated. The immobilization of ADH consisting of PQQ and four hemes improves its stability up to 10 times. Both PQQ and heme moieties are involved in the electron transport from substrate to electrode. The ferrocene derivatives improve the electron transport 10-fold. Membrane-bound alcohol dehydrogenase from Gluconobacter sp. 33, intracellular soluble glucose dehydrogenase from Acinetobacter calcoaceticus L.M.D. 79.41 (s-GDH), and the membrane-bound enzyme (m-GDH) from Erwinia sp. 34-1 were purified and investigated. Soluble and membrane-bound PQQ-glucose dehydrogenases display different behavior during the immobilization on the modified carbon electrodes. The immobilization of s-GDH leads to a decrease in both stability and substrate specificity of the enzyme. This suggests that PQQ dissociates from the enzyme active center and operates as a free-diffusing mediator. The rate-limiting step of the process is likely the loading of PQQ onto the apo-enzyme. The immobilization of m-GDH leads to its substantial stabilization and improves the substrate specificity. The nature of m-GDH binding to the electrode surface is presumably similar to the binding to the cell membrane through its anchor-subunit. The enzyme operates as an enzyme and mediator complex.     

Esterase 2-oligodeoxynucleotide conjugates as sensitive reporter for electrochemical detection of nucleic acid hybridization

A thermostable, single polypeptide chain enzyme, esterase 2 from Alicyclobacillus acidocaldarius, was covalently conjugated in a site specific manner with an oligodeoxynucleotide. The conjugate served as a reporter enzyme for electrochemical detection of DNA hybridization. Capture oligodeoxynucleotides were assembled on gold electrode via thiol-gold interaction. The esterase 2-oligodeoxynucleotide conjugates were brought to electrode surface by DNA hybridization. The p-aminophenol formed by esterase 2 catalyzed hydrolysis of p-aminophenylbutyrate was amperometrically determined. Esterase 2 reporters allows to detect approximately 1.5 x 10(-18)mol oligodeoxynucleotides/0.6 mm2 electrode, or 3 pM oligodeoxynucleotide in a volume of 0.5 microL. Chemically targeted, single site covalent attachment of esterase 2 to an oligodeoxynucleotide significantly increases the selectivity of the mismatch detection as compared to widely used, rather unspecific, streptavidin/biotin conjugated proteins. Artificial single nucleotide mismatches in a 510-nucleotide ssDNA could be reliably determined using esterase 2-oligodeoxynucleotide conjugates as a reporter.     

Evaluation of progesterone-ovalbumin conjugates with different length linkers in enzyme-linked immunosorbant assay and surface plasmon resonance-based immunoassay

A series of progesterone-4-ovalbumin (OVA) conjugates with different length linkers (4-, 11-, and 18-atoms long) were synthesized by successive aminocaproic acid homologation of 3-(pregn-4-ene-3,20-dione-4-yl)thiopropanoic acid (1) before conjugation to ovalbumin. The performance studies of these progesterone-4-ovalbumin conjugates showed that the effects of the length of linker on the antibody binding are dependent upon different immunoassay formats. In a rapid flow biosensor surface, on a BIAcore Surface Plasmon Resonance (SPR) instrument, antibody-binding capacities and response rate were dramatically increased for progesterone-4-ovalbumin conjugates when the length of the linker was incremented from 4 atoms to 11 or 18 atoms. Thus, highly sensitive SPR-based immunoassays for progesterone over a range of 0.1-50 ng ml(-1) were developed using biosensor surfaces immobilized with progesterone-ovalbumin conjugates having extended linkers. The SPR-based assays were fully competitive with conventional enzyme-linked immunosorbant assay (ELISA) but much more rapid and simple. However, there were little changes in antibody-binding performance using a conventional ELISA for the same conjugates. The progesterone-4-ovalbumin conjugate (1-OVA) had better antibody binding than its progesterone-7alpha-ovalbumin analog (2-OVA) in the SPR-based assay, but with a conventional ELISA there was no significant difference between these two isomeric conjugates.     

Evaluation of biotin-dye conjugates for use in an HPLC assay to assess relative binding of biotin derivatives with avidin and streptavidin

In this investigation, studies were conducted to determine if size exclusion HPLC could be used to assess relative association rates (on-rates) and dissociation rates (off-rates) of biotin derivatives from avidin (Av) and streptavidin (SAv). For easy detection and quantification of biotin derivatives, molecules that can be detected by UV absorbance were conjugated to biotin. Concern that conjugation of the chromophoric moieties (dyes) might affect biotin binding with Av and SAv or might interact with the HPLC column led to evaluation of 10 biotin-dye conjugates. The dyes conjugated with biotin included dansyl, cyanocobalamin (CN-Cbl), coumarin 343, Lissamine-rhodamine, fluorescein, Cascade Blue, Lucifer Yellow, Oregon Green, tetramethylrhodamine, and Alexa Fluor 594. The biotin-dye conjugates were initially evaluated to determine their peak characteristics on two different size exclusion HPLC columns. Measurement of the percent of biotin-dye conjugate bound with Av in the presence of an equal quantity of biotin provided an association rate relative to biotin. All of the biotin-dyes tested had association rates within a factor of 3x (slower) that of biotin. The relative dissociation rate of biotin-dye conjugates was assessed by challenging the biotin conjugate bound to Av or SAv with a large excess of biotin. All of the initial biotin-dye conjugates tested bound Av and SAv tightly resulting in very slow dissociation rates. From the biotin-dye conjugates studied, biotin-CN-Cbl, 6b, was selected as the best conjugate for the HPLC assay. To test the HPLC assay, an iminobiotin-CN-Cbl conjugate, 13a, and a biotin-sarcosine-CN-Cbl conjugate, 13b, were synthesized. The fact that the iminobiotin does not bind with Av at physiological pH was easily detected in the size exclusion HPLC assay. The biotin-sarcosine-CN-Cbl conjugate was expected to have a more rapid dissociation rate than the other biotin-dye conjugates. This was confirmed in that HPLC assay. Although 13b bound tightly with Av in the absence of added biotin, it was completely released within 1 h when challenged by an excess of biotin. A slower dissociation of 13b was noted with SAv. The results obtained indicate that CN-Cbl conjugates of biotin derivatives can be used to determine relative on-rates and off-rates of biotin derivatives with Av and SAv. The studies also demonstrated that the biotin-CN-Cbl conjugate, 6b, can be used as a reference compound to compare on-rates and off-rates of nonchromophoric biotin derivatives.     

Redox labelled avidin for enzyme sensor architectures

Conjugates of avidin with ferrocene and with microperoxidase 8 have been used as electrochemically active molecular building blocks. Assemblies of the conjugates with biotinylated glucose oxidase or lactate oxidase on gold electrodes were tested as enzyme sensors for glucose and lactate. The electrochemical detection is based either on ferrocene-mediated oxidation of the substrate in oxygen-free solution, or on microperoxidase-catalysed reduction of H2O2 which is enzymatically produced from the substrate and molecular oxygen. Glucose and lactate were detectable with both detection principles in concentrations down to 1 or 0.1 mM, respectively. The molecular architecture concept allows quick adaptation of the sensors to other analytes, and it provides a platform for arrays of sensors with different selectivity.     

A homogeneous electrode-based bioelectrochemical immunoassay for human chorionic gonadotrophin

An amperometric, electrode-based technique for the quantification of human chorionic gonadotrophin (HCG) is described. Glucose oxidase and an anti-HCG monoclonal antibody are co-immobilised onto a glassy carbon electrode. The activity of the enzyme is measured electrochemically by use of an electron transfer mediator (dimethylaminomethyl ferrocene). Binding of HCG to the antibody modulates the activity of the immobilised glucose oxidase, permitting quantification of HCG. Sensitivity of the assay is 7mIUHCGml⁻¹ in serum (First International Reference Preparation). Soaking in 50% ethylene glycol permits reuse of the electrode. Crossreactivity of the electrode with other hormones has been examined.     

Impact of linker and conjugation chemistry on antigen binding,Fc receptor binding and thermal stability of model antibody-drug conjugates

Antibody-drug conjugates (ADCs) with biotin as a model cargo tethered to IgG1 mAbs via different linkers and conjugation methods were prepared and tested for thermostability and ability to bind target antigen and Fc receptor. Most conjugates demonstrated decreased thermostability relative to unconjugated antibody, based on DSC, with carbohydrate and amine coupled ADCs showing the least effect compared with thiol coupled conjugates. A strong correlation between biotin-load and loss of stability is observed with thiol conjugation to one IgG scaffold, but the stability of a second IgG scaffold is relatively insensitive to biotin load. The same correlation for amine coupling was less significant. Binding of antibody to antigen and Fc receptor was investigated using surface plasmon resonance. None of the conjugates exhibited altered antigen affinity. Fc receptor FcγIIb (CD32b) interactions were investigated using captured antibody conjugate. Protein G and Protein A, known inhibitors of Fc receptor (FcR) binding to IgG, were also used to extend the analysis of the impact of conjugation on Fc receptor binding. H10_NPEG4 was the only conjugate to show significant negative impact to FcR binding, which is likely due to higher biotin-load compared with the other ADCs. The ADC aHIS_NLC and aHIS_TPEG8 demonstrated some loss in affinity for FcR, but to much lower extent. The general insensitivity of target binding and effector function of the IgG1 platform to conjugation highlight their utility. The observed changes in thermostability require consideration for the choice of conjugation chemistry, depending on the system being pursued and particular application of the conjugate.     

Imaging biomolecule arrays by atomic force microscopy.

We describe here a method for constructing ordered molecular arrays and for detecting binding of biomolecules to these arrays using atomic force microscopy (AFM). These arrays simplify the discrimination of surface-bound biomolecules through the spatial control of ligand presentation. First, photolithography is used to spatially direct the synthesis of a matrix of biological ligands. A high-affinity binding partner is then applied to the matrix, which binds at locations defined by the ligand array. AFM is then used to detect the presence and organization of the high-affinity binding partner. Streptavidin-biotin arrays of 100 x 100 microns and 8 x 8 microns elements were fabricated by this method. Contact and noncontact AFM images reveal a dense lawn of streptavidin specific to the regions of biotin derivatization. These protein regions are characterized by a height profile of approximately 40 A over the base substrate with a 350-nm edge corresponding to the diffraction zone of the photolithography. High resolution scans reveal a granular topography dominated by 300 A diameter features. The ligand-bound protein can then be etched from the substrate using the AFM tip, leaving an 8 A shelf that probably corresponds to the underlying biotin layer.