An Escherichia coli system for assay of Flp site-specific recombination on substrate plasmids

We have developed an Escherichia coli system for testing the behaviour of plasmids carrying target sites for the Flp site-specific recombinase. The E. coli strain BL-FLP is described, which carries a chromosomally integrated bacteriophage T7 RNA polymerase gene expressed from a lac promoter, and harbours the plasmid pMS40. pMS40 has the features: (i) it carries the FLP recombinase gene under the control of a bacteriophage T7 promoter, (ii) it confers kanamycin resistance, and (iii) it uses an R6K origin of replication; these two latter features make it compatible with most conventional cloning vectors. Substrate plasmids carrying Flp-recognition targets (FRT) are transformed into BL-FLP, and the consequences of Flp-mediated recombination can be analysed after subsequent extraction of plasmid DNA. We show that this system is capable of base-perfect Flp-mediated recombination on plasmid substrates. We also present a corrected sequence of the commonly used Flp substrate plasmid, pNEOβGAL (O'Gorman et al. (1991) Science 251, 1351–1355).     

Geometry of site alignment during int family recombination: antiparallel synapsis by the Flp recombinase

The Flp site-specific recombinase functions in the copy number amplification of the yeast 2 microm plasmid. The recombination reaction is catalyzed by four monomers of Flp bound to two separate, but identical, recombination sites (FRT sites) and occurs in two sequential pairs of strand exchanges. The relative orientation of the two recombination sites during synapsis was examined. Topoisomerase relaxation and nick ligation were used to detect topological nodes introduced by the synapse prior to the chemical steps of recombination. A single negative supercoil was found to be trapped by Flp in substrates with inverted FRT sites whereas no trapped supercoils were observed with direct repeats. The topology of products resulting from Flp-mediated recombination adjacent to a well characterised synapse, that of Tn3 resolvase/res, was analyzed. The deletion and inversion reactions yielded the four noded catenane and the three noded knot, respectively, as the simplest and the most abundant products. The linking number change introduced by the Flp-mediated inversion reaction was determined to be +/-2. The most parsimonious explanation of these results is that Flp aligns its recombination sites with antiparallel geometry. The majority of synapses appear to occur without entrapment of additional random plectonemic DNA supercoils between the sites and no additional crossings are introduced as a result of the chemical steps of recombination.     

Brief expression of a GFP cre fusion gene in embryonic stem cells allows rapid retrieval of site-specific genomic deletions.

The Cre DNA recombinase of bacteriophage P1 has become a useful tool for precise genomic manipulation in embryonic stem (ES) cells that have been gene modified by homologous recombination. We have re-engineered the cre gene to allow ready identification of living Cre+cells by constructing a functional fusion between Cre and an enhanced green fluorescent protein from Aequorea victoria (GFPS65T). The GFP cre fusion gene product rapidly targeted the nucleus in the absence of any exogenous nuclear localization signal. Moreover, GFPCre catalyzed efficient DNA recombination in both a mouse 3T3 derivative cell line and in murine ES cells. Fluorescence- activated cell sorting (FACS) of transiently GFP cre -transfected ES cells not only allowed rapid and efficient isolation of Cre+cells after DNA transfection but also demonstrated that a burst of Cre expression is sufficient to commit cells to Cre-mediated 'pop-out' of loxP -tagged DNA from the genome. Thus, GFP cre allows rapid identification of living cells in which loxP - flanked DNA sequences are destined to be removed from the genome by Cre-mediated recombination without reliance on recombinational activation or inactivation of a marker gene at the target locus. In addition, the GFP cre fusion gene will prove useful in tracing tissue-specific Cre expression in transgenic animals, thereby facilitating the generation and analysis of conditional gene knockout mice.     

DNA sequence determinant for Flp-induced DNA bending

The Flp site-specific recombinase from Saccharomyces cerevisiae induces DNA bending upon interaction with the Flp recognition target (FRT) site. The minimal FRT site comprises the inverted a and b binding elements, which flank a central 8 bp core region. The DNA bend in a complex of two Flp monomers bound to the FRT site is located in the middle of the core region. When the central AT basepair was replaced with a CG, the DNA bend was positioned at the outside end of the core region adjacent to the a binding element. The other basepairs surrounding the central AT basepair were not important to the position of Flp-induced bends. The change also decreased Flp-mediated cleavage of the top strand of the FRT site and increased Flp-mediated cleavage of the bottom strand. The overall recombination proficiency of the site was impaired. We conclude that the central AT basepair provides a point of flexure in the FRT site, which Flp uses to position the bend in dimeric Flp–DNA complexes, and that the structure of the core DNA influences the functionality of the site.     

Expression of Flp Protein in a Baculovirus/Insect Cell System for Biotechnological Applications

The Saccharomyces cerevisiae Flp protein is a site-specific recombinase that recognizes and binds to the Flp recognition target (FRT) site, a specific sequence comprised of at least two inverted repeats separated by a spacer. Binding of four monomers of Flp is required to mediate recombination between two FRT sites. Because of its site-specific cleavage characteristics, Flp has been established as a genome engineering tool. Amongst others, Flp is used to direct insertion of genes of interest into eukaryotic cells based on single and double FRT sites. A Flp-encoding plasmid is thereby typically cotransfected with an FRT-harboring donor plasmid. Moreover, Flp can be used to excise DNA sequences that are flanked by FRT sites. Therefore, the aim of this study was to determine whether Flp protein and its step-arrest mutant, FlpH305L, recombinantly expressed in insect cells, can be used for biotechnological applications. Using a baculovirus system, the proteins were expressed as C-terminally 3?×?FLAG-tagged proteins and were purified by anti-FLAG affinity selection. As demonstrated by electrophoretic mobility shift assays (EMSAs), purified Flp and FlpH305L bind to FRT-containing DNA. Furthermore, using a cell assay, purified Flp was shown to be active in recombination and to mediate efficient insertion of a donor plasmid into the genome of target cells. Thus, these proteins can be used for applications such as DNA-binding assays, in vitro recombination, or genome engineering.     

Generation of an Fsp1 (fibroblast‐specific protein 1)‐Flpo transgenic mouse strain

Recombination systems represent a major breakthrough in the field of genetic model engineering. The Flp recombinases (Flp, Flpe, and Flpo) bind and cleave DNA Frt sites. We created a transgenic mouse strain ([Fsp1‐Flpo]) expressing the Flpo recombinase in fibroblasts. This strain was obtained by random insertion inside mouse zygotes after pronuclear injection. Flpo expression was placed under the control of the promoter of Fsp1 (fibroblast‐specific protein 1) gene, whose expression starts after gastrulation at Day 8.5 in cells of mesenchymal origin. We verified the correct expression and function of the Flpo enzyme by several ex vivo and in vivo approaches. The [Fsp1‐Flpo] strain represents a genuine tool to further target the recombination of transgenes with Frt sites specifically in cells of mesenchymal origin or with a fibroblastic phenotype.     

The Flp recombinase cleaves Holliday junctions in trans

The Flp site-specific recombinase is encoded by the 2 µm plasmid of Saccharomyces cerevisiae and is a member of the integrase family of recombinases. Like all members of the integrase family studied, Flp mediates recombination in two steps. First, a pair of strand exchanges creates a Holliday-like intermediate; second, this intermediate is resolved to recombinant products by a second pair of strand exchanges.
Evidence derived from experiments using linear substrates indicates that Flp's active site is composed of two Flp protomers. One binds to the Flp recognition target site (FRT site) and activates the scissile phosphodiester bond for cleavage. Another molecule of Flp bound elsewhere in the synaptic complex ( in trans ) donates the nucleophilic tyrosine that executes cleavage and thereby becomes covalently attached to the 3' phosphoryl group at the cleavage site.
It has previously been shown that Flp efficiently resolves synthetic, Holliday-like (χ) structures to linear products. In this paper, we examined whether resolution of χ structures by Flp also occurs via the trans cleavage mechanism. We used in vitro complementation studies of mutant Flp proteins as well as nicked χ structures to show that Flp resolves χ structures by trans cleavage. We propose a model for Flp-mediated recombination that incorporates trans cleavage at both the initial and resolution steps of strand exchange.     

Expression of the bacteriophage P1 cin recombinase gene from its own and heterologous promoters

The cin recombinase of bacteriophage P1, a protein that catalyses site-specific DNA inversions, has been identified and its structural gene has been cloned under the control of different promoters. One of the DNA sequences used for the site-specific recombination, cixL, overlaps with the 3' end of the gene, but we show that the presence of this site does not affect cin gene expression from strong promoters. To assay cin activity we have constructed plasmids that carry antibiotic resistance genes within the invertible segment that are transcribed from promoters outside the segment. DNA inversion switches on or off genes for chloramphenicol or kanamycin resistance. These tester plasmids are used to study cin-mediated DNA inversion both in vivo and in vitro.     

Site-specific recombination in Zea mays

The elimination of marker genes after selection is recommended for the commercial use of genetically modified plants. We compared the applicability of the two site-specific recombination systems Cre/lox and Flp/FRT for marker gene elimination in maize plants. The selection marker gene pat surrounded by two identically directed lox or FRT sites was introduced into maize. Sexual crossing with plants harboring the corresponding constitutively expressed recombinase led to the precise and complete excision of the lox-flanked marker gene in the F₁ progeny, whereas Flp-mediated recombination of FRT sequences occurred rarely. Further examination of site-specific integration was done by biolistic bombardment of immature embryos harboring only one lox site with a lox.uidA sequence with results indicating directed integration.     

New recombination methods for Sinorhizobium meliloti genetics

The availability of bacterial genome sequences has created a need for improved methods for sequence-based functional analysis to facilitate moving from annotated DNA sequence to genetic materials for analyzing the roles that postulated genes play in bacterial phenotypes. A powerful cloning method that uses lambda integrase recombination to clone and manipulate DNA sequences has been adapted for use with the gram-negative alpha-proteobacterium Sinorhizobium meliloti in two ways that increase the utility of the system. Adding plasmid oriT sequences to a set of vehicles allows the plasmids to be transferred to S. meliloti by conjugation and also allows cloned genes to be recombined from one plasmid to another in vivo by a pentaparental mating protocol, saving considerable time and expense. In addition, vehicles that contain yeast Flp recombinase target recombination sequences allow the construction of deletion mutations where the end points of the deletions are located at the ends of the cloned genes. Several deletions were constructed in a cluster of 60 genes on the symbiotic plasmid (pSymA) of S. meliloti, predicted to code for a denitrification pathway. The mutations do not affect the ability of the bacteria to form nitrogen-fixing nodules on Medicago sativa (alfalfa) roots.     

Involvement of the inverted repeat of the yeast 2-micron plasmid in Flp site-specific and RAD52-dependent homologous recombination

Site-specific recombination within the Saccharomyces cerevisiae 2-micron DNA plasmid is catalyzed by the Flp recombinase at specific Flp Recognition Target (FRT) sites, which lie near the center of two precise 599-bp Inverted Repeats (IRs). However, the role of IR DNA sequences other than the FRT itself for the function of the Flp reaction in vivo is not known. In the present work we report that recombination efficiency differs depending on whether the FRT or the entire IR serves as the substrate for Flp. We also provide evidence for the involvement of the IR in RAD52-dependent homologous recombination. In contrast, the catalysis of site-specific recombination between two FRTs does not require the function of RAD52. The efficiency of Flp site-specific recombination between two IRs cloned in the same orientation is about one hundred times higher than that obtained when only the two FRTs are present. Moreover, we demonstrate that a single IR can activate RAD52-dependent homologous recombination between two flanking DNA regions, providing new insights into the role of the IR as a substrate for recombination and a new experimental tool with which to study the molecular mechanism of homologous recombination. Received: 14 June 1999 / Accepted: 3 November 1999     

Flp recombinase transgenic mice of C57BL/6 strain for conditional gene targeting

We constructed an expression vector of Flp recombinase modified by adding a nuclear localization signal. Injection of the expression vector into fertilized eggs of the C57BL/6 strain yielded transgenic mouse lines expressing the Flp recombinase transgene in the testis. We crossed the transgenic mice to reporter mice carrying the neomycin phosphotransferase gene flanked by target sites of Flp recombinase. Examination of the deletion of the neomycin phosphotransferase gene in the progeny showed that Flp-mediated recombination took place efficiently in vivo in FLP66 transgenic mouse line. These results suggest that the Flp recombinase system is effective in mice and in combination with the Cre recombinase system extends the potentials of gene manipulation in mice. One of the useful applications of FLP66 transgenic mouse line is the removal of marker genes from mice manipulated for the conditional gene targeting with the Cre/loxP system in the pure C57BL/6 genetic background.     

DNA topology and geometry in Flp and Cre recombination

The Flp recombinase of yeast and the Cre recombinase of bacteriophage P1 both belong to the lambda-integrase (Int) family of site-specific recombinases. These recombination systems recognize recombination-target sequences that consist of two 13bp inverted repeats flanking a 6 or 8bp spacer sequence. Recombination reactions involve particular geometric and topological relationships between DNA target sites at synapsis, which we investigate using nicked-circular DNA molecules. Examination of the tertiary structure of synaptic complexes formed on nicked plasmid DNAs by atomic-force microscopy, in conjunction with detailed topological analysis using the mathematics of tangles, shows that only a limited number of recombination-site topologies are consistent with the global structures of plasmids bearing directly and inversely repeated sites. The tangle solutions imply that there is significant distortion of the Holliday-junction intermediate relative to the planar structure of the four-way DNA junction present in the Flp and Cre co-crystal structures. Based on simulations of nucleoprotein structures that connect the two-dimensional tangle solutions with three-dimensional models of the complexes, we propose a recombination mechanism in which the synaptic intermediate is characterized by a non-planar, possibly near-tetrahedral, Holliday-junction intermediate. Only modest conformational changes within this structure are needed to form the symmetric, planar DNA junction, which may be characteristic of shorter-lived intermediates along the recombination pathway.     

A genome-wide analysis of FRT-like sequences in the human genome

Efficient and precise genome manipulations can be achieved by the Flp/FRT system of site-specific DNA recombination. Applications of this system are limited, however, to cases when target sites for Flp recombinase, FRT sites, are pre-introduced into a genome locale of interest. To expand use of the Flp/FRT system in genome engineering, variants of Flp recombinase can be evolved to recognize pre-existing genomic sequences that resemble FRT and thus can serve as recombination sites. To understand the distribution and sequence properties of genomic FRT-like sites, we performed a genome-wide analysis of FRT-like sites in the human genome using the experimentally-derived parameters. Out of 642,151 identified FRT-like sequences, 581,157 sequences were unique and 12,452 sequences had at least one exact duplicate. Duplicated FRT-like sequences are located mostly within LINE1, but also within LTRs of endogenous retroviruses, Alu repeats and other repetitive DNA sequences. The unique FRT-like sequences were classified based on the number of matches to FRT within the first four proximal bases pairs of the Flp binding elements of FRT and the nature of mismatched base pairs in the same region. The data obtained will be useful for the emerging field of genome engineering.     

Evolution of variants of yeast site-specific recombinase Flp that utilize native genomic sequences as recombination target sites

As a tool in directed genome manipulations, site-specific recombination is a double-edged sword. Exquisite specificity, while highly desirable, makes it imperative that the target site be first inserted at the desired genomic locale before it can be manipulated. We describe a combination of computational and experimental strategies, based on the tyrosine recombinase Flp and its target site FRT, to overcome this impediment. We document the systematic evolution of Flp variants that can utilize, in a bacterial assay, two sites from the human interleukin 10 gene, IL10, as recombination substrates. Recombination competence on an end target site is acquired via chimeric sites containing mixed sequences from FRT and the genomic locus. This is the first time that a tyrosine site-specific recombinase has been coaxed successfully to perform DNA exchange within naturally occurring sequences derived from a foreign genomic context. We demonstrate the ability of an Flp variant to mediate integration of a reporter cassette in Escherichia coli via recombination at one of the IL10-derived sites.     

Directed protein replacement in recombination full sites reveals trans-horizontal DNA cleavage by Flp recombinase.

One round of site-specific recombination between two DNA partners mediated by the Flp recombinase requires the breakage and reformation of four phosphodiester bonds. The reaction is accomplished by the combined action of four Flp monomers. Within the recombination complex, what is the relative disposition of a Flp monomer with respect to the target diester that it cleaves? To address this question, we have devised a strategy for the targeted orientation of Flp monomers within full-site recombination substrates. Our experimental design is not dependent on ''altered binding specificity'' of the recombinase. Analysis of the pattern of DNA cleavage by this method reveals no evidence for DNA cleavage in cis. A Flp monomer bound to its recognition element within the full site does not cleave the scissile phosphodiester bond adjacent to it. Our results are most consistent with ''trans-horizontal cleavage''. Cleavage by Flp occurs at the scissile phosphodiester distal to it, but within the same full site. The general experimental design employed here will be of widespread utility in mechanistic analyses of nucleic acid transactions involving multimeric DNA-protein assemblies.     

Functional analysis of box I mutations in yeast site-specific recombinases Flp and R: pairwise complementation with recombinase variants lacking the active-site tyrosine.

The site-specific recombinases Flp and R from Saccharomyces cerevisiae and Zygosaccharomyces rouxii, respectively, are related proteins that belong to the yeast family of site-specific recombinases. They share approximately 30% amino acid matches and exhibit a common reaction mechanism that appears to be conserved within the larger integrase family of site-specific recombinases. Two regions of the proteins, designated box I and box II, also harbor a significantly high degree of homology at the nucleotide sequence level. We have analyzed the properties of Flp and R variants carrying point mutations within the box I segment in substrate-binding, DNA cleavage, and full-site and half-site strand transfer reactions. All mutations abolish or seriously diminish recombinase function either at the substrate-binding step or at the catalytic steps of strand cleavage or strand transfer. Of particular interest are mutations of Arg-191 of Flp and R, residues which correspond to one of the two invariant arginine residues of the integrase family. These variant proteins bind substrate with affinities comparable to those of the corresponding wild-type recombinases. Among the binding-competent variants, only Flp(R191K) is capable of efficient substrate cleavage in a full recombination target. However, this protein does not cleave a half recombination site and fails to complete strand exchange in a full site. Strikingly, the Arg-191 mutants of Flp and R can be rescued in half-site strand transfer reactions by a second point mutant of the corresponding recombinase that lacks its active-site tyrosine (Tyr-343). Similarly, Flp and R variants of Cys-189 and Flp variants at Asp-194 and Asp-199 can also be complemented by the corresponding Tyr-343-to-phenylalanine recombinase mutant.