Effects of petroleum refinery wastewater exposure on gill ATPase and selected blood parameters in the Pacific staghorn sculpin (leptocottus armatus)

1. The effects of in vivo exposure to various concentrations of petroleum refinery wastewater on gill ATPase, plasma protein, plasma osmolarity, and hematocrit were measured in the euryhaline fish, Leptocottus armatus. 2. The extent of the reduction in Na,K-ATPase activity resulting from the exposure to the two refineries wastewaters may be related to wastewater chemical composition. 3. Changes in the blood chemistry parameters did not follow a consistent or easily explainable pattern.     

Use of adapted Aspergillus niger in the bioleaching of spent refinery processing catalyst

Spent refinery processing catalyst is listed as a hazardous waste; the toxicity characteristic leaching procedure (TCLP) extracts of the catalyst are found to contain heavy metals at concentrations exceeding the regulated levels. In the present investigation, Aspergillus niger was adapted to single metal ions Ni, Mo or Al (at 100-2,000 mg/L in steps of 100mg/L) and then to a mixture of Ni, Mo and Al (at a mass ratio of 1:2:6, as approximately present in the spent catalyst). Adaptation experiments with single metals showed that the fungus could tolerate up to 1,000 mg/L Ni, 1,200 mg/L Mo and 2,000 mg/L Al. In the presence of a mixture of these metals, the fungus was able to tolerate up to 100mg/L Ni, 200mg/L Mo and 600 mg/L Al. One-step bioleaching experiments with 1 wt% spent catalyst (of particle size <37 microm) were carried out using un-adapted and various adapted fungal strains. In contrast to the adapted strains, the un-adapted strain showed no growth in the presence of the catalyst. Ni:Mo:Al-adapted strain was the most efficient in the leaching of metals from the catalyst (at 78.5% Ni, 82.3% Mo and 65.2% Al) over 30 days due to its tolerance to the toxic elements at 1 wt%. More importantly, the Ni:Mo:Al-adapted strain was capable of bioleaching up to 3 wt% spent catalyst. The TCLP extracts of the spent catalyst after bioleaching using the Ni:Mo:Al-adapted strain showed the concentrations of Ni and Mo were well within the regulated levels.     

Evaluation of genotoxicity in a group of workers from a petroleum refinery aromatics plant

Petroleum refinery workers are potentially exposed to a wide range of petroleum-derived hydrocarbons and chemical substances used in the manufacturing of petroleum derivatives. Benzene, toluene and xylene (BTX) are produced by distillation in the aromatics units and used as raw materials for petrol and petrochemical products. The aim of this study was to evaluate the genotoxic effects of occupational exposure to BTX in a petroleum refinery in the North of Portugal. The exposed group consisted of 48 workers from the aromatics plant and the control group consisted of 30 persons matched for various confounding factors. Chromosome aberrations (CA), micronuclei (MN), and DNA damage (evaluated by means of the comet assay) were measured in peripheral blood leukocytes. t,t-Muconic acid (t,t-MA), hippuric acid (HA) and methylhippuric acid (MHA) concentrations were measured in urine samples collected at the end of the workshift. The results suggest that occupational exposure to toluene and xylene is very low. A statistically significant increase in t,t-MA excretion was found in the exposed group although t,t-MA levels were found to be lower than the biological exposure index (BEI). Significant increases were found for CA, MN and comet tail length (TL) in the exposed group (p<0.05). No association was found between tobacco smoking and the effect biomarkers analysed. A positive association was found between CA and MN with age in the control group (p<0.05).     

Photoproduction of molecular hydrogen from waste water of a sugar refinery by photosynthetic bacteria

Summary From enrichment cultures inoculated with water and sediments of a waste-water pond of a sugar refinery several photosynthetic nonsulphur bacteria have been isolated and tested for the ability to produce molecular hydrogen in the light. Strains have been found that utilize the freshly used, untreated waste substrate with higher yields than the laboratory strain used so far. Under the test conditions one strain showed higher hydrogen production rates from waste water than from any synthetic substrate.     

Effects of biodrying process on municipal solid waste properties

In this paper, the effect of biodrying process on municipal solid waste (MSW) properties was studied. The results obtained indicated that after 14 d, biodrying reduced the water content of waste, allowing the production of biodried waste with a net heating value (NHV) of 16,779 ± 2,074 kJ kg⁻¹ wet weight, i.e. 41% higher than that of untreated waste. The low moisture content of the biodried material reduced, also, the potential impacts of the waste, i.e. potential self-ignition and potential odors production. Low waste impacts suggest to landfill the biodried material obtaining energy via biogas production by waste re-moistening, i.e. bioreactor. Nevertheless, results of this work indicate that biodrying process because of the partial degradation of the organic fraction contained in the waste (losses of 290 g kg⁻¹ VS), reduced of about 28% the total producible biogas.     

The effects of bioleaching conditions on the nonferrous metals content in copper-zinc concentrate

The effects of pH and ferrous iron concentration in cultural medium on the bioleaching of copper-zinc concentrate by mesophilic and moderately thermophilic acidophilic microorganisms were studied. It was revealed that the optimum pH for bioleaching in presence of 5 g/L of ferrous iron was 1.4–1.5. It was shown that bioleaching under optimal conditions led to an increase in the copper content in solid phase from 10.1 to 14% and a decrease in the zinc content from 7.4 to 1.4%. The results of the present work demonstrate that acidophilic microorganisms can be used for treatment of complex sulfide concentrates containing copper and zinc.     

Application of oil refinery waste in the biosynthesis of glycolipids by yeast

Candida antarctica or Candida apicola synthesized surfactants (glycolipids) in the cultivation medium supplemented with oil refinery waste, either with soapstock (from 5.0% to 12.0% v/v) or post-refinery fatty acids (from 2.0% to 5.0% v/v). The efficiency of glycolipids synthesis was determined by the amount of waste supplemented to the medium and was from 7.3 to 13.4 g/l and from 6.6 to 10.5 g/l in the medium supplemented with soapstock and post-refinery fatty acids, respectively. The studied yeast also synthesized glycolipids in the non-supplemented medium however, by the enrichment of medium with the oil refinery waste, a 7.5-8.5-fold greater concentration of glycolipids was obtained in the post-culture liquid then in the medium without addition of oil refinery waste. The yeast synthesized from 6.6 to 10.3 g dry biomass/l and the intra-cellular fat content was from 16.8% to 30.2%. The efficiency of glycolipids synthesis was determined by yeast species, medium acidity and culture period. The surface tension of the post-culture liquid separated from yeast biomass was reduced to 35.6 mN/m, which corresponded to the surface tension obtained at the critical micelle concentration of glycolipids.     

New insights into polyurethane biodegradation and realistic prospects for the development of a sustainable waste recycling process

Polyurethanes are polymeric plastics that were first used as substitutes for traditional polymers suspected to release volatile organic hazardous substances. The limitless conformations and formulations of polyurethanes enabled their use in a wide variety of applications. Because approximately 10 Mt of polyurethanes is produced each year, environmental concern over their considerable contribution to landfill waste accumulation appeared in the 1990s. To date, no recycling processes allow for the efficient reuse of polyurethane waste due to their high resistance to (a)biotic disturbances. To find alternatives to systematic accumulation or incineration of polyurethanes, a bibliographic analysis was performed on major scientific advances in the polyurethane (bio)degradation field to identify opportunities for the development of new technologies to recondition this material. Until polymers exhibiting oxo- or hydro-biodegradative traits are generated, conventional polyurethanes that are known to be only slightly biodegradable are of great concern. The research focused on polyurethane biodegradation highlights recent attempts to reprocess conventional industrial polyurethanes via microbial or enzymatic degradation. This review describes several wonderful opportunities for the establishment of new processes for polyurethane recycling. Meeting these new challenges could lead to the development of sustainable management processes involving polymer recycling or reuse as environmentally safe options for industries. The ability to upgrade polyurethane wastes to chemical compounds with a higher added value would be especially attractive.     

Autophagic recycling: lessons from yeast help define the process in plants

The autophagic engulfment of cytoplasm and organelles and their delivery to the vacuole have long been speculated to play an essential role in bulk protein turnover in plants. Until recently, however, the importance and the mechanism(s) of action of these processes have remained obscure. Aided by the discovery of numerous orthologs of the yeast AUTOPHAGY (ATG) protein system in Arabidopsis, significant advances have been now made in understanding these processes. Both reverse genetic analyses of the Arabidopsis ATG genes and the use of the encoded proteins as cytological markers have confirmed the presence of autophagy in plants and have demonstrated its importance in nutrient recycling, especially during senescence and growth under carbon- or nitrogen-limiting conditions.     

Effects of hypoxia and petroleum on the genotoxic and morphological parameters of Hippocampus reidi

Hypoxia events are common in many aquatic systems, which may be a natural event or provoked by anthropogenic actions, as well as accidents involving oil occurring throughout the world are frequent. Thus, through the possibility of occurrence of these two situations in same place the purpose of this study was to evaluate if damage caused by crude oil on genotoxic and morphological parameters in the marine fish species Hippocampus reidi will be aggravated by events of severe hypoxia. Sea horses were exposed during 8h to the following conditions: crude oil (OIL), severe hypoxia (HYP), association of severe hypoxia and crude oil (HYP+OIL) and normoxia without contaminant (CONT). An increase in micronuclei observed in OIL and HYP+OIL groups indicates that the crude oil exposure was a determining factor in the micronuclei induction and hypoxia did not intensify this result. In comet assays, both petroleum and hypoxia provoke DNA damage. The most frequent histopathology in the control groups and in those exposed to OIL and HYP+OIL groups were: hypertrophy and capillary dilation; hypertrophy and hyperplasia; hypertrophy, epithelial "lifting" and epithelial hyperplasia. An elongation of the lamellae was observed in fish from the two groups exposed to hypoxia, probably due to the fact that these groups required a greater flow of blood in the gills to increase the efficiency of gas exchange, since they were in a hypoxic environment. In summary, the micronuclei test and comet assay can be used as a good biomarker of contamination by petroleum. The association of hypoxia with crude oil in some aspects may exacerbate the responses of fish, in the light of the increase in DNA damage and the alterations in thickness of the gill epithelium.     

Degradation of naphthalene to salicylic acid by cultures ofPseudomonas denitrificans andAchromobacter sp. from the effluents of petroleum refinery

The microbial degradation of aromatic hydrocarbons from effluents of a petroleum refinery was investigated, with emphasis on the breakdown of naphthalene to salicylic acid. The microorganisms were grown in a synthetic medium with naphthalene as the sole carbon source. The effects of pH, temperature, aeration and naphthalene concentration were studied. The optimum conditions for degradation were found to be: pH 6.0, 28°C, 25 ml medium with 1% naphthalene in 500 ml flasks. Salicylic acid was estimated by colorimetric and chromatographic methods. Maximum of growth was found on the 5th day of cultivation.Pseudomonas denitrificans produced 9.0 μg salicylic acid per ml medium,Achromobacter sp. produced 7.1 μg/ml.     

Bioconversion of biodiesel refinery waste in the bioemulsifier by Trichosporon mycotoxinivorans CLA2

ABSTRACT: BACKGROUND: The microbial bioemulsifiers was surface active compounds, are more effective in stabilizing oil-in-water emulsions. The yeasts have been isolated to produce bioemulsifiers from vegetable oils and industrial wastes. RESULTS: Trichosporon mycotoxinivorans CLA2 is bioemulsifier-producing yeast strain isolated from effluents of the dairy industry, with ability to emulsify different hydrophobic substrates. Bioemulsifier production (mg/L) and the emulsifying activity (E24) of this strain were optimized by response surface methodology using mineral minimal medium containing refinery waste as the carbon source, which consisted of diatomaceous earth impregnated with esters from filters used in biodiesel purification. The highest bioemulsifier production occurred in mineral minimal medium containing 75 g/L biodiesel residue and 5 g/L ammonium sulfate. The highest emulsifying activity was obtained in medium containing 58 g/L biodiesel refinery residue and 4.6 g/L ammonium sulfate, and under these conditions, the model estimated an emulsifying activity of 85%. Gas chromatography and mass spectrometry analysis suggested a bioemulsifier molecule consisting of monosaccharides, predominantly xylose and mannose, and a long chain aliphatic groups composed of octadecanoic acid and hexadecanoic acid at concentrations of 48.01% and 43.16%, respectively. The carbohydrate composition as determined by GC-MS of their alditol acetate derivatives showed a larger ratio of xylose (49.27%), mannose (39.91%), and glucose (10.81%). 1 H NMR spectra confirmed by COSY suggested high molecular weight, polymeric pattern, presence of monosaccharide's and long chain aliphatic groups in the bioemulsifier molecule. CONCLUSIONS: The biodiesel residue is an economical substrate, therefore seems to be very promising for the low-cost production of active emulsifiers in the emulsification of aromatics, aliphatic hydrocarbons, and kerosene.     

The method of contact angle measurements and estimation of work of adhesion in bioleaching of metals

In this paper, we present our method for the measurement of contact angles on the surface of minerals during the bioleaching process because the standard deviation obtained in our measurements achieved unexpectedly low error. Construction of a goniometer connected with a specially prepared computer program allowed us to repeat measurements several times over a short time course, yielding excellent results. After defining points on the outline of the image of a drop and its baseline as well of the first approximation of the outline of the drop, an iterative process is initiated that is aimed at fitting the model of the drop and baseline. In turn, after defining the medium for which measurements were made, the work of adhesion is determined according to Young-Dupré equation. Calculations were made with the use of two methods named the L-M and L-Q methods.     

Evidence of cell surface iron speciation of acidophilic iron-oxidizing microorganisms in indirect bioleaching process

While indirect model has been widely accepted in bioleaching, but the evidence of cell surface iron speciation has not been reported. In the present work the iron speciation on the cell surfaces of four typically acidophilic iron-oxidizing microorganism (mesophilic Acidithiobacillus ferrooxidans ATCC 23270, moderately thermophilic Leptospirillum ferriphilum YSK and Sulfobacillus thermosulfidooxidans St, and extremely thermophilic Acidianus manzaensis YN25) grown on different energy substrates (chalcopyrite, pyrite, ferrous sulfate and elemental sulfur (S⁰)) were studied in situ firstly by using synchrotron-based micro- X-ray fluorescence analysis and X-ray absorption near-edge structure spectroscopy. Results showed that the cells grown on iron-containing substrates had apparently higher surface iron content than the cells grown on S⁰. Both ferrous iron and ferric iron were detected on the cell surface of all tested AIOMs, and the Fe(II)/Fe(III) ratios of the same microorganism were affected by different energy substrates. The iron distribution and bonding state of single cell of A. manzaensis were then studied in situ by scanning transmission soft X-ray microscopy based on dual-energy contrast analysis and stack analysis. Results showed that the iron species distributed evenly on the cell surface and bonded with amino, carboxyl and hydroxyl groups.     

Induction of micronucleus and nuclear alterations in fish (Oreochromis niloticus) by a petroleum refinery effluent

In this study, micronucleus and nuclear alterations tests were performed on erythrocytes of Oreochromis niloticus (Perciformes, Cichlidae) in order to evaluate the water quality of the Atibaia river, in an area that receives effluents discharge of a petroleum refinery and also to evaluate the effectiveness of the treatments used by the refinery. Water samples were collected in five different sites related with a refinery from S?o Paulo State, Brazil. For the micronucleus and nuclear alterations tests, O. niloticus specimens were exposed for 72 h to the water samples and in pure ground water (negative control). The results herein obtained indicated that the treatments used by the refinery diminished the cytogenetic damage; however they were not fully effective, since the final mill has induced damages in the genetic material of the test organism.     

Waste recycling: utilization of coffee grounds and kitchen waste in vermicomposting

Vermicomposting using Lumbricus rubellus for 49 days was conducted after 21 days of pre-composting. Three different combination of treatments were prepared with eight replicates for each treatment namely cow dung: kitchen waste in 30:70 ratio (T(1)), cow dung: coffee grounds in 30:70 ratio (T(2)), and cow dung: kitchen waste: coffee grounds in 30:35:35 ratio (T(3)). The multiplication of earthworms in terms of numbers and weight were measured at the end of vermicomposting. Consequently, only T(2) showed significant increase (from it initial stage) compared to other treatments. The presence of coffee grounds in T(2) and T(3) showed higher percentage of nutrient elements in vermicompost produced. The data reveal that coffee grounds can be decomposed through vermicomposting and help to enhance the quality of vermicompost produced rather than sole use of kitchen waste in vermicomposting.     

Removal of heavy metals from stainless steel effluents by waste biomass from Brazilian alcoholic beverage production

The capacity of waste biomasses from sugar-cane aguardente, a traditional Brazilian spirit, for metal biosorption was assessed. Free biomass and biomass immobilized onto chitin and Dowex (ion-exchange resin) were utilized to remove chromium, iron and nickel from both synthetic solutions and stainless steel effluents. The best performance in terms of metal sorbed was observed in with free biomass, with the following adsorption capacity: 70% chromium, 50% iron and 20% nickel at pH 4.0.     

Effects of physico-chemical parameters on the bacterial and fungal communities during agricultural waste composting

The goal of this study was to identify and prioritize some of the physico-chemical parameters that contributed to bacterial and fungal community compositions during agricultural waste composting. Relationships between those parameters and microbial community compositions determined by PCR-DGGE were simultaneously evaluated by redundancy analysis (RDA). The results showed that the temporal variation of bacterial community composition was significantly related to water soluble carbon (WSC), ammonium and nitrate (P<0.05), while the most variation in distribution of fungal community composition was statistically explained by pile temperature, WSC, and moisture content (P<0.05). Significant amounts of the variation (54.9% and 56.0% for bacterial and fungal species data, respectively) were explained by those parameters, suggesting that those parameters were the most likely ones to influence, or be influenced by the bacterial and fungal species. Variation partitioning analyses indicated that WSC and pile temperature showed predominant effect on the bacterial and fungal community composition, respectively.