Intimate coupling of photocatalysis and biodegradation in a photocatalytic circulating-bed biofilm reactor

Coupling advanced oxidative pretreatment with subsequent biodegradation demonstrates potential for treating wastewaters containing biorecalcitrant and inhibitory organic constituents. However, advanced oxidation is indiscriminate, producing a range of products that can be too oxidized, unavailable for biodegradation, or toxic themselves. This problem could be overcome if advanced oxidation and biodegradation occurred together, an orientation called intimate coupling; then, biodegradable organics are removed as they are formed, focusing the chemical oxidant on the non-biodegradable fraction. Intimate coupling has seemed impossible because the conditions of advanced oxidation, for example, hydroxyl radicals and sometimes UV-light, are severely toxic to microorganisms. Here, we demonstrate that a novel photocatalytic circulating-bed biofilm reactor (PCBBR), which utilizes macro-porous carriers to protect biofilm from toxic reactants and UV light, achieves intimate coupling. We demonstrate the viability of the PCBBR system first with UV only and acetate, where the carriers grew biofilm and sustained acetate biodegradation despite continuous UV irradiation. Images obtained by scanning electron microscopy and confocal laser scanning microscopy show bacteria living behind the exposed surface of the cubes. Second, we used slurry-form Degussa P25 TiO2 to initiate photocatalysis of inhibitory 2,4,5-trichlorophenol (TCP) and acetate. With no bacterial carriers, photocatalysis and physical processes removed TCP and COD to 32% and 26% of their influent levels, but addition of biofilm carriers decreased residuals to 2% and 4%, respectively. Biodegradation alone could not remove TCP. Photomicrographs clearly show that biomass originally on the exterior of the carriers was oxidized (charred), but biofilm a short distance within the carriers was protected. Finally, we coated TiO2 directly onto the carrier surface, producing a hybrid photocatalytic-biological carrier. These carriers likewise demonstrated the concept of photocatalytic degradation of TCP coupled with biodegradation of acetate, but continued TCP degradation required augmentation with slurry-form TiO2.     

Iridium Oxide‐Assisted Plasmon‐Induced Hot Carriers: Improvement on Kinetics and Thermodynamics of Hot Carriers

Plasmonic nanostructures are capable of driving photocatalysis through absorbing photons in the visible region of the solar spectrum. Unfortunately, the short lifetime of plasmon‐induced hot carriers and sluggish surface chemical reactions significantly limit their photocatalytic efficiencies. Moreover, the thermodynamically favored excitation mechanism of plasmonic photocatalytic reactions is unclear. The mechanism of how the plasmonic catalyst could enhance the performance of chemical reaction and the limitation of localized surface plasmon resonance devices is proposed. In addition, a design is demonstrated through co‐catalyst decorated plasmonic nanoparticles Au/IrO_X upon a semiconductor nanowire‐array TiO₂ electrode that are able to considerably improve the lifetime of plasmon‐induced charge‐carriers and further facilitate the kinetics of chemical reaction. A thermodynamically favored excitation with improved kinetics of hot carriers is revealed through electrochemical studies and characterization of X‐ray absorption spectrum. This discovery provides an opportunity to efficiently manage hot carriers that are generated from metal nanostructures through surface plasmon effects for photocatalysis applications.     

Integrated photocatalytic-biological reactor for accelerated phenol mineralization

An integrated photocatalytic-biological reactor (IPBR) was developed for accelerated phenol degradation and mineralization. In the IPBR, photodegradation and biodegradation occurred simultaneously, but in two separated zones: a piece of mat-glass plate coated with TiO₂ film and illuminated by UV light was connected by internal circulation to a honeycomb ceramic that was the biofilm carrier for biodegradation. This arrangement was designed to give intimate coupling of photocatalysis and biodegradation. Phenol degradation was investigated by following three protocols: photocatlysis with TiO₂ film under ultraviolet light, but no biofilm (photodegradation); biofilm biodegradation with no UV light (biodegradation); and simultaneous photodegradation and biodegradation (intimately coupled photobiodegradation). Photodegradation alone could partly degrade phenol, but was not able to achieve significant mineralization, even with an HRT of 10 h. Biodegradation alone could completely degrade phenol, but it did not mineralize the COD by more than 74%. Photobiodegradation allowed continuous rapid degradation of phenol, but it also led to more complete mineralization of phenol (up to 92%) than the other protocols. The results demonstrate that intimate coupling was achieved by protecting the biofilm from UV and free-radical inhibition. With phenol as the target compound, the main advantage of intimate coupling in the IPBR was increased mineralization, presumably because photocatalysis made soluble microbial products more rapidly biodegradable.     

Integrated photocatalytic-biological reactor for accelerated 2,4,6-trichlorophenol degradation and mineralization

An integrated photocatalytic-biological reactor (IPBR) was used for accelerated degradation and mineralization of 2,4,6-trichlorophenol (TCP) through simultaneous, intimate coupling of photocatalysis and biodegradation in one reactor. Intimate coupling was realized by circulating the IPBR’s liquid contents between a TiO₂ film on mat glass illuminated by UV light and honeycomb ceramics as biofilm carriers. Three protocols—photocatalysis alone (P), biodegradation alone (B), and integrated photocatalysis and biodegradation (photobiodegradation, P&B)—were used for degradation of different initial TCP concentrations. Intimately coupled P&B also was compared with sequential P and B. TCP removal by intimately coupled P&B was faster than that by P and B alone or sequentially coupled P and B. Because photocatalysis relieved TCP inhibition to biodegradation by decreasing its concentration, TCP biodegradation could become more important over the full batch P&B experiments. When phenol, an easy biodegradable compounds, was added to TCP in order to promote TCP mineralization by means of secondary utilization, P&B was superior to P and B in terms of mineralization of TCP, giving 95% removal of chemical oxygen demand. Cl⁻ was only partially released during P experiments (24%), and this corresponded to its poor mineralization in P experiments (32%). Thus, intimately coupled P&B in the IPBR made it possible obtain the best features of each: rapid photocatalytic transformation in parallel with mineralization of photocatalytic products.     

2,4,6-trichlorophenol (TCP) photobiodegradation and its effect on community structure

The mechanisms occurring in a photolytic circulating-bed biofilm reactor (PCBBR) treating 2,4,6-trichlorophenol (TCP) were investigated using batch experiments following three protocols: photodegradation alone (P), biodegradation alone (B), and intimately coupled photodegradation and biodegradation (P&B). Initially, the ceramic particles used as biofilm carriers rapidly adsorbed TCP, particularly in the B experiments. During the first 10 min, the TCP removal rate for P&B was equal to the sum of the rates for P and B, and P&B continued to have the greatest TCP removal, with the TCP concentration approaching zero only in the P&B experiments. When phenol, an easily biodegradable compound, was added along with TCP in order to promote TCP mineralization by means of secondary utilization, P&B was superior to P and B in terms of mineralization of TCP, giving 95% removal of chemical oxygen demand (COD). The microbial communities, examined by clone libraries, changed dramatically during the P&B experiments. Whereas Burkholderia xenovorans, a known degrader of chlorinated aromatics, was the dominant strain in the TCP-acclimated inoculum, it was replaced in the P&B biofilm by strains noted for biofilm formation and biodegrading non-chlorinated aromatics.     

Long‐Lived,Visible‐Light‐Excited Charge Carriers of TiO2/BiVO4 Nanocomposites and their Unexpected Photoactivity for Water Splitting

Different mole ratios of TiO₂/BiVO₄ nanocomposites with effective contacts have are fabricated by putting BiVO₄ nanoparticles into the TiO₂ sol, followed by thermal treatment at 450 °C. Based on the transient‐state surface photovoltage responses and the atmosphere‐controlled steady‐state surface photovoltage spectra, it is concluded that the photogenerated charge carriers in the TiO₂/BiVO₄ nanocomposite with a proper mole ratio (5%) display much longer lifetime and higher separation than those in the BiVO₄ alone. This is responsible for the unexpected activity for photoelectrochemical oxidation of water, for photocatalytic production of H₂, and for photocatalytic degradation of phenol as a model pollutant under visible irradiation. Moreover, it is suggested that the prolonged lifetime and increased separation of photogenerated charges in the fabricated TiO₂/BiVO₄ nanocomposite is attributed to the unusual spatial transfer of visible‐excited high‐energy electrons of BiVO₄ to TiO₂. This work will provide feasible routes to synthesize visible‐light responsive nanomaterials for efficient solar utilization.     

2,4-DNT removal in intimately coupled photobiocatalysis: the roles of adsorption, photolysis, photocatalysis, and biotransformation

The removal of 2,4-dinitrotoluene (2,4-DNT) by simultaneous UV-photo(cata)lysis and biodegradation was explored using intimately coupled photolysis/photocatalysis and biodegradation (ICPB) with two novel porous carriers. First, a porous ceramic carrier was used to attach the photocatalyst (TiO?) on its exterior and accumulate biomass in its interior. UV irradiation alone decomposed 71% of the 2,4-DNT in 60 h, and TiO? catalyst improved the photolysis to 77%. Second, a macroporous sponge carrier was used to strongly adsorb 2,4-DNT and protect microorganisms from 2,4-DNT inhibition and UV irradiation. The main photolytic reactions were reduction of the nitryl to amino and hydrolysis of the amino to release NH??. The main biodegradation reactions were oxidative release of NO?? and accelerated reductive release of NH??. ICPB more thoroughly released inorganic N, with nearly equal amounts being oxidized to nitrate and reduced to ammonium. The genera Burkholderia and Bacillus were found inside the sponge carriers, and they are associated with biodegradation of DNT and its photolysis intermediates. Therefore, using an adsorbent and macroporous biofilm carrier enabled the effective removal of 2,4-DNT by ICPB.     

Azo dyes decolorization under high alkalinity and salinity conditions by Halomonas sp. in batch and packed bed reactor

Biodecolorization and biodegradation of azo dyes are a challenge due to their recalcitrance and the characteristics of textile effluents. This study presents the use of Halomonas sp. in the decolorization of azo dyes Reactive Black 5 (RB5), Remazol Brilliant Violet 5R (RV5), and Reactive Orange 16 (RO16) under high alkalinity and salinity conditions. Firstly, the effect of air supply, pH, salinity and dye concentration was evaluated. Halomonas sp. was able to remove above 84% of all dyes in a wide range of pH (6–11) and salt concentrations (2–10%). The decolorization efficiency of RB5, RV5, and RO16 was found to be ≥ 90% after 24, 13 and 3 h, respectively, at 50 mg L⁻¹ of dyes. The process was monitored by HPLC-DAD, finding a reduction of dyes along the time. Further, Halomonas sp. was immobilized in volcanic rocks and used in a packed bed reactor for 72 days, achieving a removal rate of 3.48, 5.73, and 8.52 mg L⁻¹ h⁻¹, for RB5, RV5 and RO16, respectively, at 11.8 h. The study has confirmed the potential of Halomonas sp. to decolorize azo dyes under high salinity and alkalinity conditions and opened a scope for future research in the treatment of textile effluents.

     

Microplate-based assays for the evaluation of antibacterial effects of photocatalytic coatings

Three microplate-based viability assays for assessing the antibacterial effects of photocatalytic coatings were compared to the conventional colony count method. In the experimental design, cultured Escherichia coli were exposed to photocatalysis on various TiO₂ films in the presence of either UVA or visible light. The photocatalytic effects on the bacterial physiology were determined by real-time measurements of metabolic activity (XTT assay), biomass formation in the liquid medium (growth assay), and by assessing membrane integrity (with propidium iodide and SYTO 9 fluorescent nucleic acid binding dyes—BacLight assay). All three methods proved to be more sensitive and reproducible than colony count for the evaluation of the bactericidal effect of photocatalysis, XTT, and growth assay succeeded in detecting differences in both UVA and visible light-activated photocatalytic coatings. BacLight could efficiently detect the visible light-dependent photocatalytic effect on bacteria and identify membrane damage, but resulted inadequate for evaluating the UVA-dependent antibacterial effects. The described microplate-based evaluation methods proved being more effective and rapid than the colony count assay for assessing the antibacterial effect of various photocatalytic coatings.     

Flexible polymer TiO2 modified film photocatalysts active in the photodegradation of azo-dyes in solution

This review summarizes the recent developments of thin film polymer coated photocatalysis with TiO₂ mediating the discoloration/degradation of the azo-dye Orange II under light irradiation. The stable anchoring of TiO₂ on non-heat resistant but chemically inert flexible polymer films is described. The nature of the polymer films used, the pretreatment of the film for the TiO₂ loading and the testing of the photocatalytic activity are addressed for different inert polymer films not having the conventional functional surface groups to bind TiO₂. The discoloration of Orange II in the presence of LDPE/TiO₂ is completed in about 10 h. This is a significantly longer times than the one observed for the same process when Tedlar/TiO₂ and Parylene/TiO₂ were used in the dye discoloration process. This points out to specific effects particular to each the polymer support used to graft the photoactive TiO₂ particles.     

Photobiodegradation of phenol with ultraviolet irradiation of new ceramic biofilm carriers

Activated sludge acclimated to biodegrade phenol was allowed to attach on and in light porous ceramic carriers and to function as a biofilm in a photolytic circulating-bed bioreactor (PCBBR). Phenol degradation in the PCBBR was investigated following three protocols: photolysis with ultraviolet light alone (P), biodegradation alone (B), and the two mechanisms operating simultaneously (P/B). Phenol was degraded at approximately equal rates by B and P/B, each of which was much faster than the rate by P. Furthermore, phenol was mineralized to a significantly greater extent with P/B than with either P or B. SEM showed that the biofilm survived well inside macropores that presumably shaded the microorganisms from UV irradiation, even though the UV light greatly reduced biofilm on outer surface of the carriers in the P/B experiments. Rapid biodegradation of phenol, enhanced mineralization, and survival of bacteria inside macropores demonstrated that being in a biofilm inside the porous carriers protected the bacteria from UV-light toxicity, allowing intimate coupling of photolysis and biodegradation.     

Effect of TiO2 nanoparticles on some photophysical characteristics of ketocyanine dyes

The effect of titanium dioxide (TiO₂) nanoparticles (NPs) on photophysical characteristics of 2,5‐di[(E)‐1‐(4‐dimethylaminophenyl) methylidine]‐1‐cyclopentanone (2,5‐DMAPMC) and 2,5‐di[(E)‐1‐(4‐diethylaminophenyl)methylidine]‐1‐cyclopentanone (2,5‐DEAPMC) ketocyanine dyes has been studied using absorption, steady‐state and time‐resolved fluorescence spectroscopy. The magnitudes of association constants determined based on modified absorption spectrum of dyes due to the presence of TiO₂ NPs indicate the interaction of TiO₂ NPs with dye molecules. The quenching of fluorescence intensity of dyes by TiO₂ NPs is observed and it follows linear Stern‐Volmer (S‐V) equation. The magnitude of quenching rate parameter suggests the involvement of static quenching mechanism. The involvement of electron transfer process in reducing fluorescence intensity of dyes has been discussed. Also, varying influence of TiO₂ NPs on two dyes is explained based on the presence of different alkyl substituent in two dyes.     

Photocatalytic Water Splitting for Solar Hydrogen Production Using the Carbonate Effect and the Z‐Scheme Reaction

The development of innovative technologies for solar energy conversion and storage is important for solving the global warming problem and for establishing a sustainable society. The photocatalytic water‐splitting reaction using semiconductor powders has been intensively studied as a promising technology for direct and simple solar energy conversion. However, the evolution of H₂ and O₂ gases in a stoichiometric ratio (H₂/O₂ = 2) is very difficult owing to various issues, such as an unfavorable backward reaction and mismatched band potentials. Two important findings have widened the variety of photocatalysts available for stoichiometric water‐splitting, viz. the carbonate anion effect and the Z‐scheme photocatalytic reaction using a redox mediator. The bicarbonate anion has been found to act as a redox catalyst via preferential peroxide formation and subsequent decomposition to O₂. As the Z‐scheme reaction using a redox mediator mitigates band potential mismatches, it is widely applicable for various visible‐light‐active photocatalysts. This review describes the development of photocatalytic water‐splitting for solar hydrogen production using the carbonate anion effect and the Z‐scheme reaction. Moreover, recent developments in photocatalysis–electrolysis hybrid systems, an advanced Z‐scheme reaction concept, are also reviewed for practical and economical hydrogen production.     

Fixed-bed decolorization of Reactive Blue 172 by Proteus vulgaris NCIM-2027 immobilized on Luffa cylindrica sponge

Proteus vulgaris NCIM-2027 cells immobilized on Luffa cylindrica (Loofa) completely decolorized C.I. Reactive Blue 172 at 37 °C and pH 8.0 under 5-h static incubation with high total organic carbon (TOC) and chemical oxygen demand (COD) reduction. The repeated-batch decolorization experiments also indicate good reusability of the immobilized biocatalyst. Some oxidoreductive enzymes were shown to be involved in the decolorization and degradation process. Loofa immobilized cells were also able to decolorize a mixture of reactive dyes in batch mode (in terms of ADMI value) with significant reduction in TOC and COD. Loofa immobilized cells were also used for continuous decolorization of individual and mixture of reactive dyes in a fixed bed bioreactor.     

Treatment and kinetic modelling of a simulated dye house effluent by enzymatic catalysis

Biocatalytic treatment of a synthetic dye house effluent, simulating a textile wastewater containing various reactive dyestuffs (Reactive Yellow 15, Reactive Red 239 and Reactive Black 5) and auxiliary chemicals, was investigated in a batch reactor using a commercial laccase. A high decolourisation (above 86%) was achieved at the maximum wavelength of Reactive Black 5. The decolourisation at the other dyes wavelengths (above 63% for RY15 and around 41% for RR239) and the total decolourisation based on all the visible spectrum (around 55%) were not so good, being somewhat lower than in the case of a mixture of the dyes (above 89% for RB5, 77% for RY15, 68% for RR239 and above 84% for total decolourisation). Even so, these results suggest the applicability of this method to treat textile dyeing wastewaters. Kinetic models were developed to simulate the synthetic effluent decolourisation by commercial laccase. The kinetic constants of the models were estimated by minimizing the difference between the predicted and the experimental time courses. The close correlation between the experimental data and the simulated values seems to demonstrate that the models are able to describe with remarkable accuracy the simulated effluent degradation. Water quality parameters such as TOC, COD, BOD₅ and toxicity were found to be under the maximum permissible discharge limits for textile industries wastewaters.     

TiO2 Photocatalysis Damages Lipids and Proteins in Escherichia coli

This study investigates the mechanisms of UV-A (315 to 400 nm) photocatalysis with titanium dioxide (TiO₂) applied to the degradation of Escherichia coli and their effects on two key cellular components: lipids and proteins. The impact of TiO₂ photocatalysis on E. coli survival was monitored by counting on agar plate and by assessing lipid peroxidation and performing proteomic analysis. We observed through malondialdehyde quantification that lipid peroxidation occurred during the photocatalytic process, and the addition of superoxide dismutase, which acts as a scavenger of the superoxide anion radical (O₂·⁻), inhibited this effect by half, showing us that O₂·⁻ radicals participate in the photocatalytic antimicrobial effect. Qualitative analysis using two-dimensional electrophoresis allowed selection of proteins for which spot modifications were observed during the applied treatments. Two-dimensional electrophoresis highlighted that among the selected protein spots, 7 and 19 spots had already disappeared in the dark in the presence of 0.1 g/liter and 0.4 g/liter TiO₂, respectively, which is accounted for by the cytotoxic effect of TiO₂. Exposure to 30 min of UV-A radiation in the presence of 0.1 g/liter and 0.4 g/liter TiO₂ increased the numbers of missing spots to 14 and 22, respectively. The proteins affected by photocatalytic oxidation were strongly heterogeneous in terms of location and functional category. We identified several porins, proteins implicated in stress response, in transport, and in bacterial metabolism. This study reveals the simultaneous effects of O₂·⁻ on lipid peroxidation and on the proteome during photocatalytic treatment and therefore contributes to a better understanding of molecular mechanisms in antibacterial photocatalytic treatment.     

Efficient enrichment of phosphopeptides by magnetic TiO₂-coated carbon-encapsulated iron nanoparticles

Titanium dioxide (TiO₂) has been widely used for phosphopeptide enrichment. Several approaches have been reported to produce magnetic TiO₂ affinity probes. In this report, we present a facile approach to immobilize TiO₂ onto poly(acrylic acid)‐functionalized magnetic carbon‐encapsulated iron nanoparticles as affinity probes for efficient enrichment of phosphopeptides. By using the new magnetic TiO₂ affinity probes, denoted as TiO₂‐coated Fe@CNPs, rapid and effective MALDI‐TOF MS profiling of phosphopeptides was demonstrated in different model systems such as tryptic digests of β‐casein, and complex β‐casein/BSA mixture. The TiO₂‐coated Fe@CNPs out‐performed the commercial TiO₂‐coated magnetic beads for detection of phosphopeptides from tryptic digests of β‐casein/BSA mixture with a molar ratio of 1:100. The new TiO₂‐coated magnetic probes were also proven to be applicable for real life samples. The magnetic TiO₂‐coated Fe@CNPs were employed to selectively isolate phosphopeptides from tryptic digests of HeLa cell lysates and out‐performed the commercial magnetic TiO₂ beads in the number of identified phosphopeptides and phosphorylation sites. In a 200‐μg equivalent of HeLa cell lysates, we identified 1415 unique phosphopeptides and 1093 phosphorylation sites, indicating the good performance of the new approach.     

UV‐Inert ZnTiO3 Electron Selective Layer for Photostable Perovskite Solar Cells

Although planar‐structured perovskite solar cells (PSCs) have power conversion efficiencies exceeding 24%, the poor photostability, especially with ultraviolet irradiance (UV) severely limits commercial application. The most commonly‐used TiO₂ electron selective layer has a strong photocatalytic effect on perovskite/TiO₂ interface when TiO₂ is excited by UV light. Here a UV‐inert ZnTiO₃ is reported as the electron selective layer in planar PSCs. ZnTiO₃ is a perovskite‐structured semiconductor with excellent chemical stability and poor photocatalysis. Solar cells are fabricated with a structure of indium doped tin oxide (ITO)/ZnTiO₃/Cs_0.05FA_0.81MA_0.14PbI_2.55Br_0.45/Sprio‐MeOTAD/Au. The champion device exhibits a stabilized power conversion efficiency of 19.8% with improved photostability. The device holds 90% of its initial efficiency after 100 h of UV soaking (365 nm, 8 mW cm^?2), compared with 55% for TiO₂‐based devices. This work provides a new class of electron selective materials with excellent UV stability in perovskite solar cell applications.     

Biosorption of reactive dyes by dried activated sludge: equilibrium and kinetic modelling

The biosorption of reactive dyes (Reactive Blue 2 - RB2 and Reactive Yellow 2 - RY2) onto dried activated sludge was investigated. The dye binding capacity of biosorbent was shown as a function of initial pH, initial dye concentration and type of dye. The equilibrium data fitted very well to both the Freundlich and Langmuir adsorption models. The results showed that both the dyes uptake processes followed the second-order rate expression.     

Interfacial Charge Modulation: An Efficient Strategy for Boosting Spatial Charge Separation on Semiconductor Photocatalysts

Surface modulation via injection or extraction of charge carriers in microelectric devices has been used to tune the energy band alignment for desired electrical and optical properties, yet not well recognized in photocatalysis field. Here, taking semiconductor bismuth tantalum oxyhalides (Bi₄TaO₈X) as examples, chemically inactive molybdenum oxide (MoO₃) with a large work function is introduced to qualitatively tune the properties of interfacial charges, achieving an evidently enhanced upward band bending and intensive built‐in electric field. Such a simple charge modulation exhibits a remarkable improvement in photocatalytic water oxidation, reaching an apparent quantum efficiency of 25% at the input wavelength of 420 nm. The validity and generality of surface charge modulating strategy are further demonstrated using other semiconductors (e.g., C₃N₄) and decorators (e.g., V₂O₅). The findings not only provide a promising strategy for rationally manipulating the interfacial built‐in electric field in photocatalysis but also pave the way to learn from microelectronic technologies to construct artificial photosynthesis systems for solar energy conversion.