Ferroceneacetyl naphthalene diimide as a new electrochemical ligand for DNA sensing.

New electrochemically active DNA ligand 1 was synthesized by the connection of ferroceneacetic acid at the terminal amino moieties of two imide substituents of naphthalene diimide. Electrochemical experiments in aqueous solution containing DMSO showed that the selectivity for double stranded DNA of 1 has increased from that of ligand 2 previously reported. The peak current of 1 shifted toward the negative side from that of 2, thereby shortening the time required for gene detection.     

QCM detection of DNA targets with single-base mutation based on DNA ligase reaction and biocatalyzed deposition amplification

A novel biosensing technique for highly specific identification of gene with single-base mutation is proposed based on the implementation of the DNA ligase reaction and the biocatalyzed deposition of an insoluble product. The target gene mediated deposition of an insoluble precipitate is then transduced by quartz crystal microbalance (QCM) measurements. In this method, the DNA target hybridizes with a capture DNA probe tethered onto the gold electrode and then with a biotinylated allele-specific detection DNA. A ligase reaction is performed to generate the ligation between the capture and the detection probes, provided there is perfect match between the DNA target and the detection probe. Otherwise even when there is an allele mismatch between them, no ligation would take place. After thermal treatment at an elevated temperature, the formed duplex melts apart that merely allows the detection probe perfectly matched with the target to remain on the electrode surface. The presence of the biotinylated allele-matched probe is then detected by the QCM via the binding to streptavidin-peroxide horseradish (SA-HRP), which catalyzes the oxidative precipitation of 3,3-diaminobenzidine (DAB) by H2O2 on the electrode and provides an amplified frequency response. The proposed approach has been successfully implemented for the identification of single-base mutation in -28 site of the beta-thalassemia gene with a detection limit of 0.1 nM, demonstrating that this method provides a highly specific and cost-efficient approach for point mutation detection.     

Electrochemical release of ethidium into and fluorescence detection of DNA-ethidium complexes in the diffusion layer at a carbon paste electrode.

The electrochemically controlled release of the ethidium cation from the surface of carbon paste composite electrode was demonstrated using laser-induced fluorescence detection. The electrode contained an ethidium tetracyanoquinodimethane salt. The following experimental parameters were varied in order to optimize the fluorescence intensity: carbon paste composition, electrode potential, voltage pulse time, and laser power. In the presence of calf thymus DNA the fluorescence signal from the diffusion layer was linearly dependent on the logarithm of the DNA concentration over the range from 0.1 to 10(4) ppb.     

Electrochemical growth of gold nanoparticles on horizontally aligned carbon nanotubes: a new platform for ultrasensitive DNA sensing

A new platform based on electrochemical growth of Au nanoparticles on horizontally aligned single walled carbon nanotube (SWCNT) array was developed for ultrasensitive DNA detection. The as-prepared DNA-functionalized SWCNT-Au platform, in which every gold-coated SWCNT acts as an isolated micro electrode, could detect lower than 10 zmol complimentary 10-base DNA, which corresponded to having 6 DNA molecules in a 1 mL sample solution. For a 1-base mismatched DNA, the experimental detection limit was 100 amol. A linear relationship between the change of charge transfer resistance and target DNA concentration was achieved at low concentration range. Over the extended DNA concentration range, the change of charge transfer resistance was found to have a linear relationship with respect to the logarithm of the target DNA concentration. The sensor also showed great stability and could be conveniently regenerated via dehybridization in hot water. The significant improvement in sensitivity illustrates that combining Au nanoparticles with the on-site fabricated SWCNT array represents a promising platform for achieving ultrasensitive biosensor.     

A DNA intercalation-based electrochemical method for detection of Chlamydia trachomatis utilizing peroxidase-catalyzed signal amplification

A sensitive electrochemical DNA detection method for the diagnosis of sexually transmitted disease (STD) caused by Chlamydia trachomatis was developed. The method utilizes a DNA-intercalating agent and a peroxidase promoted enzymatic precipitation reaction and involves the following steps. After hybridization of the target C. trachomatis gene with an immobilized DNA capture probe on a gold electrode surface, the biotin-tagged DNA intercalator (anthraquinone) was inserted into the resulting DNA duplex. Subsequently, the polymeric streptavidin/peroxidase complex was applied to the biotin-decorated electrode. Peroxidase catalyzed 4-chloronaphthol to produce insoluble product, which is precipitated on the electrode surface in the presence of hydrogen peroxide. Cyclic voltammograms with the gold electrode exhibited a peak current of ferrocenemethanol in electrolyte, which decreased in a proportional way to increasing concentration of target DNA owing to insulation of electrode surface by the growing insoluble precipitate. Using this strategy, we were able to detect picomolar concentrations of C. trachomatis gene in a sample taken from a real patient.     

Hybridization assay at a disposable electrochemical biosensor for the attomole detection of amplified human cytomegalovirus DNA

A disposable electrochemical biosensor for the detection of DNA sequences related to the human cytomegalovirus (HCMV) is described. The sensor relies on the adsorption of an amplified human cytomegalovirus DNA strand onto the sensing surface of a screen-printed carbon electrode, and to its hybridization to a complementary single-stranded biotinylated DNA probe. The extent of hybrids formed was determined with streptavidin conjugated to horseradish peroxidase. The peroxidase label was indirectly quantified by measuring the amount of the chromophore and electroactive product 2,2'-diaminoazobenzene generated from the o-phenylenediamine substrate. The intensity of differential pulse voltammetric peak currents resulting from the reduction of the enzyme-generated product was related to the number of target HCMV-amplified DNA molecules present in the sample, and the results were compared to those obtained with standard methods, i.e., agarose gel electrophoresis quantification and colorimetric hybridization assay in a microtiter plate. A detection limit of 0.6 amol/ml of HCMV-amplified DNA fragment was obtained with the electrochemical DNA biosensor. The electrochemical method was 23,000-fold more sensitive than the gel electrophoresis technique and 83-fold more sensitive than the colorimetric hybridization assay in a microtiter plate.     

Improved detection limit for catecholamines using liquid chromatography-electrochemistry with a carbon interdigitated array microelectrode

The detection limit of catecholamines can be lowered by using a carbon-based interdigitated array (IDA) microelectrode as a detector for liquid chromatography (LC). The IDA electrode is more sensitive than conventional glassy carbon electrodes due to the high current density caused by radial diffusion at each microband, and redox cycling between two microband arrays. Since the number of redox cycles increases at lower flow-rates, the carbon IDA is particularly useful for microbore LC. In an LC system with a 1-mm microbore column and a carbon IDA electrode, the peak height of dopamine (DA) and DOPAC did not decrease with decreasing flow-rate because of this redox cycling. A low detection limit of 5 fg (32 amol) and 9.6 fg (57 amol) was obtained for DA and DOPAC due to the high current density and low background noise level (0.1 pA) at the carbon IDA electrode. The total charge generated by oxidizing DA at the anodic array was more than the value calculated by assuming that all the DA molecules were oxidized.     

A new approach to the construction of potentiometric immunosensors.

An electrochemical immunosensor based on a new detection principle was developed. Laccase, which is able to catalyse the electroreduction of oxygen via the direct (mediatorless) mechanism was used as an enzyme label. The new detection method does not require the presence of an electrochemically active mediator, and the reaction substrates are atmospheric oxygen and electrons, the latter being taken by the active site of the enzyme label directly from the electrode. The formation of the complex between laccase-labelled antibody and antigen on the electrode surface resulted in a considerable (more than 300 mV) shift of the electrode potential. The rate of the increase of the electrode potential was inversely proportional to the concentration of the free antigen in the sample. The non-specific adsorption of conjugate and other proteins on the electrode could be eliminated by using a polyethylenimine-based polymer on the electrode surface. Insulin was used as a model analyte. The sensitivity limit for this antigen was approximately 3 micrograms ml-1.     

An electrical probe of protein-DNA interactions on DNA-modified surfaces

DNA charge transport chemistry is found to provide a sensitive method for probing protein-dependent changes in DNA structure and enzymatic reactions. Here we describe the development of an electrochemical assay of protein binding to DNA-modified electrodes based upon the detection of associated perturbations in DNA base stacking. Gold electrode surfaces that were modified with loosely packed DNA duplexes, covalently crosslinked to a redox-active intercalator and containing the binding site of the test protein, were constructed. Charge transport through DNA as a function of protein binding was then assayed. Substantial attenuation in current is seen in the presence of the base-flipping enzymes HhaI methylase and uracil DNA glycosylase, as well as with TATA-binding protein. When restriction endonuclease PvuII (R.PvuII) binds to its methylated target, little base-stacking perturbation occurs and little diminution in current flow is observed. Importantly, the kinetics of restriction by R.PvuII of its nonmethylated target is also easily monitored electrochemically. This approach should be generally applicable to assaying protein--DNA interactions and reactions on surfaces.     

Electrochemically amplified molecular beacon biosensor for ultrasensitive DNA sequence-specific detection of Legionella sp

An electrochemically amplified molecular beacon (EAMB) biosensor is constructed using thiolated hairpin DNA-ferrocene probes on gold electrode. The switching from "on" to "off" states of individual probes in the presence of complementary DNA target influences the electrode potential, besides the current, owing to changes in surface density of the electroactive hairpin DNA-ferrocene probes. The EAMB biosensor demonstrates linear range over 8 orders of magnitude with ultrasensitive detection limit of 2.3 × 10(-14)M for the quantification of a 21-mer DNA sequence. Its applicability is tested against PCR amplicons derived from genomic DNA of live Legionella pneumophila. Excellent specificity down to one and three nucleotides mismatches in another strain of L. pneumophila and a different bacterium species, respectively, is demonstrated.     

Enzymatic amplification detection of DNA based on "molecular beacon" biosensors

We described a novel electrochemical DNA biosensor based on molecular beacon (MB) probe and enzymatic amplification protocol. The MB modified with a thiol at its 5' end and a biotin at its 3' end was immobilized on the gold electrode through mixed self-assembly process. Hybridization events between MB and target DNA cause the conformational change of the MB, triggering the attached biotin group on the electrode surface. Following the specific interaction between the conformation-triggered biotin and streptavidin-horseradish peroxidase (HRP), subsequent quantification of DNA was realized by electrochemical detection of enzymatic product in the presence of substrate. The detection limit is obtained as low as 0.1nM. The presented DNA biosensor has good selectivity, being able to differentiate between a complementary target DNA sequence and one containing G-G single-base mismatches.     

Nanoparticle based DNA biosensor for tuberculosis detection using thermophilic helicase-dependent isothermal amplification

The present study describes the development of a DNA based biosensor to detect Mycobacterium tuberculosis using thermophilic helicase-dependent isothermal amplification (tHDA) and dextrin coated gold nanoparticles (AuNPs) as electrochemical reporter. The biosensor is composed of gold nanoparticles (AuNPs) and amine-terminated magnetic particles (MPs) each functionalized with a different DNA probe that specifically hybridize with opposite ends of a fragment within the IS6110 gene, which is M. tuberculosis complex (MTC) specific. After hybridization, the formed complex (MP-target-AuNP) is magnetically separated from the solution and the AuNPs are electrochemically detected on a screen printed carbon electrode (SPCE) chip. The obtained detection limit is 0.01 ng/μl of isothermally amplified target (105 bp). This biosensor system can be potentially implemented in peripheral laboratories with the use of a portable, handheld potentiostat.     

Colorimetric detection of the tuberculosis complex using cycling probe technology and hybridization in microplates

Cycling probe technology (CPT) is a simple signal amplification method for the detection of specific target DNA sequences. CPT uses a chimeric DNA-RNA-DNA probe that is cut by RNase H when bound to its complementary target sequence. In this study, a hybridization assay was developed to detect biotinylated CPT products that result from the amplification of a Mycobacterium tuberculosis complex sequence. The chimeric probe was specifically designed to avoid the formation of secondary structures. The chosen capture probe was perfectly complementary to and was the same size as OL2, one of the two CPT products. The assay was based on the observation that a long sequence, such as the initial probe, was destabilized when bound to a small capture probe as a result of steric hindrance. The capture probe preferentially bound OL2 rather than the long initial probe. We added a prehybridization step with a helper DNA to enhance this discrimination between the two sequences. Colorimetric detection was performed using a peroxidase-streptavidin conjugate. After optimization, the non-isotopic hybridization assay allowed the detection of around 10 amol of target DNA. Besides being faster and easier to perform, this detection method was compared to electrophoresis separation and gave similar results.     

Development of an electrochemical DNA biosensor with a high sensitivity of fM by dendritic gold nanostructure modified electrode

In this paper, dendritic gold nanostructure (DenAu) modified electrode was obtained by direct electrodeposition of planar electrode into 2.8 mM HAuCl(4) and 0.1 M H(2)SO(4) solution under a very negative potential of -1.5 V. Scanning electron microscopy was used to characterize the growth evolution of DenAu with time. The whole DNA biosensor fabrication process based on the DenAu modified electrode was characterized by cyclic voltammetry and electrochemical impedance spectroscopy methods with the use of ferricyanide as an electrochemical redox indicator. The probe DNA immobilization and hybridization with target DNA on the modified electrode could be well distinguished by using methylene blue as an electrochemical hybridization indicator. The DenAu modified electrode could realize an ultra sensitivity of 1 fM toward complementary target DNA and a very wide dynamic detection range (from 1 fM to 1 nM).     

Nucleic acid hybridization assays employing dA-tailed capture probes. II. Advanced multiple capture methods

A fourth capture is added to the reversible target capture procedure of the preceding paper. This results in an improved radioisotopic detection limit of 7.3 x 10(-21) mol of target. In addition, the standard triple capture method is converted into a nonradioactive format with a detection limit of under 1 amol of target. The principal advantage of nonradioactive detection is that the entire assay can be performed in about 1 h. Nucleic acids are released from cells in the presence of the ('capture probe') which contains a 3'-poly(dA) sequence and the ('labeled probe') which contains a detectable nonradioactive moiety such as biotin. After a brief hybridization in solution, the target is captured on oligo(dT) magnetic particles. The target is further purified from sample impurities and excess labeled probe by recapture either once or twice more on fresh magnetic particles. The highly purified target is then concentrated to 200 nl by recapture onto a poly(dT) nitrocellulose filter and rapidly detected with streptavidin-alkaline phosphatase using bromochloroindolyl phosphate and nitroblue tetrazolium. Using this procedure, as little as 0.25 amol of a target plasmid has been detected nonradioactively in crude samples in just 1 h without prior purification of the DNA and RNA. Finally, a new procedure called background capture is introduced to complement the background-reducing power of RTC.     

DNA point mutation detection based on DNA ligase reaction and nano-Au amplification: a piezoelectric approach

A novel piezoelectric method for DNA point mutation detection based on DNA ligase reaction and nano-Au-amplified DNA probes is proposed. A capture probe was designed with the potential point mutation site located at the 3' end and a thiol group at the 5' end to be immobilized on the gold electrode surface of quartz crystal microbalance (QCM). Successive hybridization with the target DNA and detection probe of nano-Au-labeled DNA forms a double-strand DNA (dsDNA). After the DNA ligase reaction and denaturing at an elevated temperature, the QCM frequency would revert to the original value for the target with single-base mismatch, whereas a reduced frequency response would be obtained for the case of the perfect match target. In this way, the purpose of point mutation discrimination could be achieved. The current approach is demonstrated with the identification of a single-base mutation in artificial codon CD17 of the beta-thalassemia gene, and the wild type and mutant type were discriminated successfully. The scanning electron microscope (SEM) image showing that plenty of gold nanoparticles remained on the electrode surface demonstrated that the nano-Au label served as an efficient signal amplification agent in QCM assay. A detection limit of 2.6 x 10(-9)mol/L of oligonucleotides was achieved. Owing to its ease of operation and low detection limit, it is expected that the proposed procedure may hold great promise in both research-based and clinical genomic assays.     

Design of a sandwich-mode amperometric biosensor for detection of PML/RARα fusion gene using locked nucleic acids on gold electrode

In this study, a novel DNA electrochemical probe (locked nucleic acid, LNA) was designed and involved in constructing an electrochemical DNA biosensor for detection of promyelocytic leukemia/retinoic acid receptor alpha (PML/RARα) fusion gene in acute promyelocytic leukemia for the first time. This biosensor was based on a 'sandwich' sensing mode, which involved a pair of LNA probes (capture probe immobilized at electrode surface and biotinyl reporter probe as an affinity tag for streptavidin-horseradish peroxidase (streptavidin-HRP). Since biotin can be connected with streptavidin-HRP, this biosensor offered an enzymatically amplified electrochemical current signal for the detection of target DNA. In the simple hybridization system, DNA fragment with its complementary DNA fragment was evidenced by amperometric detection, with a detection limit of 74 fM and a linear response range of 0.1-10 pM for synthetic PML/RARα fusion gene in acute promyelocytic leukemia (APL). Otherwise, the biosensor showed an excellent specificity to distinguish the complementary sequence and different mismatch sequences. The new pattern also exhibited high sensitivity and selectivity in mixed hybridization system.     

High-sensitive electrochemical detection of point mutation based on polymerization-induced enzymatic amplification

Here a highly sensitive electrochemical method is described for the detection of point mutation in DNA. Polymerization extension reaction is applied to specifically initiate enzymatic electrochemical amplification to improve the sensitivity and enhance the performance of point mutation detection. In this work, 5'-thiolated DNA probe sequences complementary to the wild target DNA are assembled on the gold electrode. In the presence of wild target DNA, the probe is extended by DNA polymerase over the free segment of target as the template. After washing with NaOH solution, the target DNA is removed while the elongated probe sequence remains on the sensing surface. Via hybridizing to the designed biotin-labeled detection probe, the extended sequence is capable of capturing detection probe. After introducing streptavidin-conjugated alkaline phosphatase (SA-ALP), the specific binding between streptavidin and biotin mediates a catalytic reaction of ascorbic acid 2-phosphate (AA-P) substrate to produce a reducing agent ascorbic acid (AA). Then the silver ions in solution are reduced by AA, leading to the deposition of silver metal onto the electrode surface. The amount of deposited silver which is determined by the amount of wild target can be quantified by the linear sweep voltammetry (LSV). The present approach proved to be capable of detecting the wild target DNA down to a detection limit of 1.0×10(-14) M in a wide target concentration range and identifying -28 site (A to G) of the β-thalassemia gene, demonstrating that this scheme offers a highly sensitive and specific approach for point mutation detection.     

Highly sensitive amperometric detection of genomic DNA in animal tissues

A simple and highly sensitive method for the detection of genomic DNA in tissue samples is described. It is based on amperometric detection of target DNA by forming an analyte/polymeric activator bilayer on a gold electrode. The biotinylated target DNA is hybridized to oligonucleotide capture probes immobilized on the gold electrode, forming the first layer. A subsequent binding of glucose oxidase– avidin conjugate to the target DNA and the introduction of a second layer of a redox polymer to the electrode, via layer-by-layer electrostatic self-assembly, allow for electrochemical detection of the catalytic oxidation current of glucose in a PBS solution. Less than 2.0 fg of rat genomic DNA, for both regulated and house-keeping genes, can be easily detected in 2.5 µl droplets. The proposed procedure shows very high specificity for genomic DNA in a RT–PCR mixture.     

Attomole DNA detection assay via rolling circle amplification and single molecule detection

A bead-based assay was developed for highly sensitive single molecule DNA detection. Rolling circle amplification (RCA), an isothermal amplification technique that creates tandem repeated sequences, was used in combination with a fluorescent complementary DNA to create dense clusters of fluorescence. These clusters, each corresponding to a single target molecule, can be detected unambiguously due to their high signal/noise ratios. The limit of detection of this assay is approximately 1 amol. This simple single molecule assay allows high detection sensitivity without the use of complex equipment.