High-resolution AFM imaging of single-stranded DNA-binding (SSB) protein--DNA complexes

DNA in living cells is generally processed via the generation and the protection of single-stranded DNA involving the binding of ssDNA-binding proteins (SSBs). The studies of SSB-binding mode transition and cooperativity are therefore critical to many cellular processes like DNA repair and replication. However, only a few atomic force microscopy (AFM) investigations of ssDNA nucleoprotein filaments have been conducted so far. The point is that adsorption of ssDN A-SSB complexes on mica, necessary for AFM imaging, is not an easy task. Here, we addressed this issue by using spermidine as a binding agent. This trivalent cation induces a stronger adsorption on mica than divalent cations, which are commonly used by AFM users but are ineffective in the adsorption of ssDNA-SSB complexes. At low spermidine concentration (<0.3 mM), we obtained AFM images of ssDNA-SSB complexes (E. coli SSB, gp32 and yRPA) on mica at both low and high ionic strengths. In addition, partially or fully saturated nucleoprotein filaments were studied at various monovalent salt concentrations thus allowing the observation of SSB-binding mode transition. In association with conventional biochemical techniques, this work should make it possible to study the dynamics of DNA processes involving DNA-SSB complexes as intermediates by AFM.     

Association of protein-DNA recognition complexes: electrostatic and nonelectrostatic effects

In this study the electrostatic and nonelectrostatic contributions to the binding free energy of a number of different protein-DNA recognition complexes are investigated. To determine the electrostatic effects in the protein-DNA association the Poisson-Boltzmann approach was applied. Overall the salt-dependent electrostatic free energy opposed binding in all protein-DNA complexes except one, and the salt-independent electrostatic contribution favored binding in more than half of the complexes. Further the salt-dependent electrostatic free energy increased with higher ionic concentrations and therefore complex association is stronger opposed at higher ionic concentrations. The hydrophobic effect in the protein-DNA complexes was determined from the buried accessible surface area and the surface tension. A majority of the complexes showed more polar than nonpolar buried accessible surface area. Interestingly the buried DNA-accessible surface area was preferentially hydrophilic, only in one complex a slightly more hydrophobic buried accessible surface area was observed. A quite sophisticated balance between several different free energy components seems to be responsible for determining the free energy of binding in protein-DNA systems.     

High-resolution AFM imaging of single-stranded DNA-binding (SSB) protein—DNA complexes

DNA in living cells is generally processed via the generation and the protection of single-stranded DNA involving the binding of ssDNA-binding proteins (SSBs). The studies of SSB-binding mode transition and cooperativity are therefore critical to many cellular processes like DNA repair and replication. However, only a few atomic force microscopy (AFM) investigations of ssDNA nucleoprotein filaments have been conducted so far. The point is that adsorption of ssDN A–SSB complexes on mica, necessary for AFM imaging, is not an easy task. Here, we addressed this issue by using spermidine as a binding agent. This trivalent cation induces a stronger adsorption on mica than divalent cations, which are commonly used by AFM users but are ineffective in the adsorption of ssDNA–SSB complexes. At low spermidine concentration (<0.3mM), we obtained AFM images of ssDNA–SSB complexes (E. coli SSB, gp32 and yRPA) on mica at both low and high ionic strengths. In addition, partially or fully saturated nucleoprotein filaments were studied at various monovalent salt concentrations thus allowing the observation of SSB-binding mode transition. In association with conventional biochemical techniques, this work should make it possible to study the dynamics of DNA processes involving DNA–SSB complexes as intermediates by AFM.     

DNA binding to mica correlates with cationic radius: assay by atomic force microscopy.

In buffers containing selected transition metal salts, DNA binds to mica tightly enough to be directly imaged in the buffer in the atomic force microscope (AFM, also known as scanning force microscope). The binding of DNA to mica, as measured by AFM-imaging, is correlated with the radius of the transition metal cation. The transition metal cations that effectively bind DNA to mica are Ni(II), Co(II), and Zn(II), which have ionic radii from 0.69 to 0.74 A. In Mn(II), ionic radius 0.82 A, DNA binds weakly to mica. In Cd(II) and Hg(II), respective ionic radii of 0.97 and 1.1 A, DNA does not bind to mica well enough to be imaged with the AFM. These results may to relate to how large a cation can fit into the cavities above the recessed hydroxyl groups in the mica lattice, although hypotheses based on hydrated ionic radii cannot be ruled out. The dependence of DNA binding on the concentrations of the cations Ni(II), Co(II), or Zn(II) shows maximal DNA binding at approximately 1-mM cation. Mg(II) does not bind DNA tightly enough to mica for AFM imaging. Mg(II) is a Group 2 cation with an ionic radius similar to that of Ni(II). Ni(II), Co(II), and Zn(II) have anomalously high enthalpies of hydration that may relate to their ability to bind DNA to mica. This AFM assay for DNA binding to mica has potential applications for assaying the binding of other polymers to mica and other flat surfaces.     

Study of the DNA/ethidium bromide interactions on mica surface by atomic force microscope: influence of the surface friction

The influence of mica surface on DNA/ethidium bromide interactions is investigated by atomic force microscopy (AFM). We describe the diffusion mechanism of a DNA molecule on a mica surface by using a simple analytical model. It appears that the DNA diffusion on a mica surface is limited by the surface friction due to the counterion correlations between the divalent counterions condensed on both mica and DNA surfaces. We also study the structural changes of linear DNA adsorbed on mica upon ethidium bromide binding by AFM. It turns out that linear DNA molecules adsorbed on a mica surface are unable to relieve the topological constraint upon ethidium bromide binding. In particular, strongly adsorbed molecules tend to be highly entangled, while loosely bound DNA molecules appear more extended with very few crossovers. Adsorbed DNA molecules cannot move freely on the surface because of the surface friction. Therefore, the topological constraint increases due to the ethidium bromide binding. Moreover, we show that ethidium bromide has a lower affinity for strongly bound molecules due to the topological constraint induced by the surface friction.     

Adsorption of DNA to mica mediated by divalent counterions: a theoretical and experimental study

The adsorption of DNA molecules onto a flat mica surface is a necessary step to perform atomic force microscopy studies of DNA conformation and observe DNA-protein interactions in physiological environment. However, the phenomenon that pulls DNA molecules onto the surface is still not understood. This is a crucial issue because the DNA/surface interactions could affect the DNA biological functions. In this paper we develop a model that can explain the mechanism of the DNA adsorption onto mica. This model suggests that DNA attraction is due to the sharing of the DNA and mica counterions. The correlations between divalent counterions on both the negatively charged DNA and the mica surface can generate a net attraction force whereas the correlations between monovalent counterions are ineffective in the DNA attraction. DNA binding is then dependent on the fractional surface densities of the divalent and monovalent cations, which can compete for the mica surface and DNA neutralizations. In addition, the attraction can be enhanced when the mica has been pretreated by transition metal cations (Ni(2+), Zn(2+)). Mica pretreatment simultaneously enhances the DNA attraction and reduces the repulsive contribution due to the electrical double-layer force. We also perform end-to-end distance measurement of DNA chains to study the binding strength. The DNA binding strength appears to be constant for a fixed fractional surface density of the divalent cations at low ionic strength (I < 0.1 M) as predicted by the model. However, at higher ionic strength, the binding is weakened by the screening effect of the ions. Then, some equations were derived to describe the binding of a polyelectrolyte onto a charged surface. The electrostatic attraction due to the sharing of counterions is particularly effective if the polyelectrolyte and the surface have nearly the same surface charge density. This characteristic of the attraction force can explain the success of mica for performing single DNA molecule observation by AFM. In addition, we explain how a reversible binding of the DNA molecules can be obtained with a pretreated mica surface.     

Tethered-Hopping Model for Protein-DNA Binding and Unbinding Based on Sox2-Oct1-Hoxb1 Ternary Complex Simulations

The sliding and hopping models encapsulate the essential protein-DNA binding process for binary complex formation and dissociation. However, the effects of a cofactor protein on the protein-DNA binding process that leads to the formation of a ternary complex remain largely unknown. Here we investigate the effect of the cofactor Sox2 on the binding and unbinding of Oct1 with the Hoxb1 control element. We simulate the association of Oct1 with Sox2-Hoxb1 using molecular dynamics simulations, and the dissociation of Oct1 from Sox2-Hoxb1 using steered molecular dynamics simulations, in analogy to a hopping event of Oct1. We compare the kinetic and thermodynamic properties of three model complexes (the wild-type and two mutants) in which the Oct1-DNA base-specific interactions or the Sox2-Oct1 protein-protein interactions are largely abolished. We find that Oct1-DNA base-specific interactions contribute significantly to the total interaction energy of the ternary complex, and that nonspecific Oct1-DNA interactions are sufficient for driving the formation of the protein-DNA interface. The Sox2-Oct1 protein-protein binding interface is largely hydrophobic, with remarkable shape complementarity. This interface promotes the formation of the ternary complex and slows the dissociation of Oct1 from its DNA-binding site. We propose a simple two-step reaction model of protein-DNA binding, called the tethered-hopping model, that explains the importance of the cofactor Sox2 and may apply to similar ternary protein-DNA complexes.     

Heat capacity effects of water molecules and ions at a protein-DNA interface

The interaction of the TATA-box binding protein from the thermophilic and halophilic archaea Pyrococcus woesei (PwTBP) with an oligonucleotide containing a specific binding site is stable over a very broad range of temperatures and ionic strengths, and is consequently an outstanding system for characterising general features of protein-DNA thermodynamics. In common with other specific protein-DNA recognition events, the PwTBP-TATA box interaction is accompanied by a large negative change in heat capacity (ΔC_p) arising from the total change in solvation that occurs upon binding, which in this case involves a net uptake of cations. Contrary to previous hypotheses, we find no overall effect of ionic strength on this heat capacity change. We investigate the local contributions of site-specific ion and water binding to the overall change in heat capacity by means of a series of site-directed mutations of PwTBP. We find that although changes in the local ion binding capacity affect the enthalpic and entropic contributions to the free energy of the interaction, they do not affect the change in heat capacity. In contrast, we find remarkably large heat capacity effects arising from two particular symmetry-related mutations. The great magnitude of these effects is not explicable in terms of current semi-empirical models of heat capacity change. Previously reported X-ray crystal structures show that these mutated residues are at the centre of an evolutionarily conserved network of water-mediated hydrogen bonds between the protein and the DNA backbone. Consequently, we conclude that, in addition to water molecules buried in the protein-DNA interface that have been previously shown to influence heat capacity, bridging water molecules in a highly polar surface environment can also contribute substantially to negative heat capacity change on formation of a protein-DNA complex.     

Differences between EcoRI nonspecific and "star" sequence complexes revealed by osmotic stress

The binding of the restriction endonuclease EcoRI to DNA is exceptionally specific. Even a single basepair change ("star" sequence) from the recognition sequence, GAATTC, decreases the binding free energy of EcoRI to values nearly indistinguishable from nonspecific binding. The difference in the number of waters sequestered by the protein-DNA complexes of the "star" sequences TAATTC and CAATTC and by the specific sequence complex determined from the dependence of binding free energy on water activity is also practically indistinguishable at low osmotic pressures from the 110 water molecules sequestered by nonspecific sequence complexes. Novel measurements of the dissociation rates of noncognate sequence complexes and competition equilibrium show that sequestered water can be removed from "star" sequence complexes by high osmotic pressure, but not from a nonspecific complex. By 5 Osm, the TAATTC "star" sequence complex has lost almost 90 of the approximately 110 waters initially present. It is more difficult to remove water from the CAATTC "star" sequence complex. The sequence dependence of water loss correlates with the known sequence dependence of "star" cleavage activity.     

Nano-mechanical measurements of protein-DNA interactions with a silicon nitride pulley

Proteins adhere to DNA at locations and with strengths that depend on the protein conformation, the underlying DNA sequence and the ionic content of the solution. A facile technique to probe the positions and strengths of protein-DNA binding would aid in understanding these important interactions. Here, we describe a ‘DNA pulley’ for position-resolved nano-mechanical measurements of protein-DNA interactions. A molecule of λ DNA is tethered by one end to a glass surface, and by the other end to a magnetic bead. The DNA is stretched horizontally by a magnet, and a nanoscale knife made of silicon nitride is manipulated to contact, bend and scan along the DNA. The mechanical profile of the DNA at the contact with the knife is probed via nanometer-precision optical tracking of the magnetic bead. This system enables detection of protein bumps on the DNA and localization of their binding sites. We study theoretically the technical requirements to detect mechanical heterogeneities in the DNA itself.     

Interaction of the adeno-associated virus Rep protein with a sequence within the A palindrome of the viral terminal repeat.

We have characterized a Rep binding sequence which is within the A stem region of the adeno-associated virus terminal repeat (TR) and compared its affinity with that of the complete hairpinned TR for pure Rep68. Both the A stem and the complete TR substrates produced a complex pattern of protein-DNA complexes in which at least six different bound species could be distinguished. Competition experiments suggested that the dissociation constant for the A stem sequence is approximately 125-fold higher than that for the complete TR. The competition experiments also suggested that the average number of Rep molecules per TR substrate molecule under conditions of saturating substrate is 3.7:1, while for the A stem substrate, the ratio is 10:1. In spite of the apparent difference in protein-to-DNA ratio in the complexes, no major difference was seen in the mobility or the pattern of the protein-DNA complexes with the two kinds of substrates, suggesting that the difference in protein-to-DNA ratio was due to the lower stability of the A stem complex rather than the actual number of Rep molecules per DNA molecule. At least some of the difference in stability of the two kinds of complexes was due to the fact that the dissociation rate of the A stem substrate from the protein-DNA complexes was approximately fourfold faster than that of the complete TR. The dissociation rate curves for both substrates, however, were complex, suggesting that substrate was being released from at least two different kinds of protein-DNA complexes at different rates. In addition, we have analyzed binding to several substitution mutants within the A stem of the TR. A five-base mutant near the terminal resolution site (trs site) had little effect on binding. Two other mutants produced seven- or five-base substitutions within the 25-bp sequence of the A stem that had been identified in the accompanying report (D. M. McCarty, D. J. Pereira, I. Zolotukhin, X. Zhou, J. H. Ryan, and N. Muzyczka, J. Virol. 68:4988-4997, 1994) as essential for binding. Each of these mutants eliminated some but not all of the repeating GAGC motifs in the 25-bp A stem region. Both of these mutants completely abolished binding to the A stem substrate but only partially reduced binding in the context of the complete hairpinned TR. Furthermore, neither mutant altered the pattern of Rep-DNA complexes produced.(ABSTRACT TRUNCATED AT 400 WORDS)     

Phosphorylated protamines. II. Circular dichroism of complexes with DNA, dependency on ionic strength.

The influence of protamine phosphorylation upon the conformation of nucleoprotamine complexes was studied at different ionic strengths using circular dichroism. The sharp onset of CD spectral changes upon decreasing the NaC1 concentrationwas correlated with the beginning of complex formation and can be used to determine apparent binding affinities in terms of a critical ionic strength. It is show that phosphorylation strongly reduces the binding strength of protamines towards DNA. Directly mixed and reconstituted complexes reveal differences in their CD spectra, which decrease with increasing ionic strength. Spectra of complexes between threefold phosphorylated clupeine Z and DNA obtained by reconstitution or direct mixing at higher ionic strength resemble the phi-type spectra of DNA and are unique for the phosphorylated species. The implications of protamine phosphorylation for chromatin or DNA condensation havebeen discussed.     

AFM for analysis of structure and dynamics of DNA and protein-DNA complexes

This paper describes protocols for studies of structure and dynamics of DNA and protein-DNA complexes with atomic force microscopy (AFM) utilizing the surface chemistry approach. The necessary specifics for the preparation of functionalized surfaces and AFM probes with the use of silanes and silatranes, including the protocols for synthesis of silatranes are provided. The methodology of studies of local and global conformations DNA with the major focus on the time-lapse imaging of DNA in aqueous solutions is illustrated by the study of dynamics of Holliday junctions including branch migration. The analysis of nucleosome dynamics is selected as an example to illustrate the application of the time-lapse AFM to studies of dynamics of protein-DNA complexes. The force spectroscopy is the modality of AFM with a great importance to various fields of biomedical studies. The AFM force spectroscopy approach for studies of specific protein-DNA complexes is illustrated by the data on analysis of dynamics of synaptic SfiI-DNA complexes. When necessary, additional specifics are added to the corresponding example.     

The V(D)J recombination signal sequence and kappa B binding protein Rc binds DNA as dimers and forms multimeric structures with its DNA ligands.

The murine DNA binding protein Rc binds to the heptamer motif of the V(D)J recombination signal sequences and to the kappa B motif of the immunoglobulin enhancer. Bacterial fusion proteins for Rc and DNA ligands of Rc form multiple protein-DNA complexes in electrophoretic mobility shift assays (EMSA). Large complexes formation is favored by an increased Rc concentration. In order to determine the architecture of these complexes, the apparent molecular weights of the protein-DNA complexes were first determined by their gel mobilities. The data suggest that Rc binds to its DNA ligands as dimers, tetramers, and multiples of tetramers. The inference that Rc binds DNA as dimers was substantiated by the formation of chimeric complexes when two electrophoretically distinguishable Rc proteins were employed in EMSA. Methylation interference experiments show that there are no contiguous protein binding sites evident in the DNA of the larger complexes. Apparently, multimerization occurs via protein-protein interactions. Such interaction was demonstrated by the formation of Rc dimers and tetramers in a chemical crosslinking experiment. Significantly, the multimerization of DNA-bound Rc could be involved in bringing the variable region gene segments together for the somatic V(D)J recombination.     

DNA-induced polymerization of HIV-1 integrase analyzed with fluorescence fluctuation spectroscopy

Human immunodeficiency virus type 1 (HIV-1) integrase is essential for viral replication. Integrase inserts the viral DNA into the host DNA. We studied the association of integrase to fluorescently labeled oligonucleotides using fluorescence correlation spectroscopy. The binding of integrase to the fluorescent oligonucleotides resulted in the appearance of bright spikes during fluorescence correlation spectroscopy measurements. These spikes arise from the formation of high molecular mass protein-DNA complexes. The fluorescence of the free DNA was separated from the spikes with a statistical method. From the decrease of the concentration of free oligonucleotides, a site association constant was determined. The DNA-protein complexes were formed rapidly in a salt-dependent manner with site association constants ranging between 5 and 40 microm(-1) under different conditions. We also analyzed the kinetics of the DNA-protein complex assembly and the effect of different buffer components. The formation of the fluorescent protein-DNA complex was inhibited by guanosine quartets, and the inhibition constant was determined at 1.8 +/- 0.6 x 10(8) m(-1). Displacement of bound DNA with G-quartets allowed the determination of the dissociation rate constant and proves the reversibility of the association process.     

Direct visualization of the EcoRII-DNA triple synaptic complex by atomic force microscopy

Interactions between distantly separated DNA regions mediated by specialized proteins lead to the formation of synaptic protein-DNA complexes. This is a ubiquitous phenomenon which is critical in various genetic processes. Although such interactions typically occur between two sites, interactions among three specific DNA regions have been identified, and a corresponding model has been proposed. Atomic force microscopy was used to test this model for the EcoRII restriction enzyme and provide direct visualization and characterization of synaptic protein-DNA complexes involving three DNA binding sites. The complex appeared in the images as a two-loop structure, and the length measurements proved the site specificity of the protein in the complex. The protein volume measurements showed that an EcoRII dimer is the core of the three-site synaptosome. Other complexes were identified and analyzed. The protein volume data showed that the dimeric form of the protein is responsible for the formation of other types of synaptic complexes as well. The applications of these results to the mechanisms of the protein-DNA interactions are discussed.