Proteomic analysis of Escherichia coli biofilms reveals the overexpression of the outer membrane protein OmpA

Bacterial colonisation and biofilm formation on the surface of urinary catheters is a common cause of nosocomial infection, and as such is a major impediment to their long-term use. Understanding the mechanisms of biofilm formation on urinary catheters is critical to their control and will aid the future development of materials used in their manufacture. In this report we have used proteomic analysis coupled with immunoassays to show that the major outer membrane protein (OmpA) of Escherichia coli is overexpressed during biofilm formation. A series of synthetic hydrogels being developed for potential use as catheter coatings were used as the substrata and OmpA expression was increased in biofilms on all these surfaces, as well as being a feature of both a laboratory and a clinical strain of E. coli. Up-regulation of OmpA may, therefore, be a common feature of E. coli biofilms. These findings present OmpA as a potential target for biofilm inhibition and may contribute to the rational design of biofilm inhibiting hydrogel coatings for urinary catheters.     

Cell surface exposure of the outer membrane protein OmpA of Escherichia coli K-12

The 325-residue OmpA protein is one of the major outer membrane proteins of Escherichia coli K-12. A model, in which this protein crosses the membrane eight times in an antiparallel beta-sheet conformation and in which regions around amino acids 25, 70, 110 and 154 are exposed at the cell surface, had been proposed. Linkers were inserted into the ompA gene with the result that OmpA proteins, carrying non-OmpA sequences between residues 153 and 154 or 160 and 162, were synthesized. Intact cells possessing these proteins were treated with proteases. Insertion of 15 residues between residues 153 and 154 made the protein sensitive to proteinase K and the sizes of the two cleavage products were those expected following proteolysis at the area of the insertion. Addition of at least 17 residues between residues 160 and 162 left the protein completely refractory to protease action. Thus, the former area is cell surface exposed while the latter area appears not to be. The insertions did not cause a decrease in the concentration of the hybrid proteins as compared to that of the OmpA protein, and in neither case was synthesis of the protein deleterious to cell growth. It is suggested that this method may serve to carry peptides of practical interest to the cell surface and that it can be used to probe surface-located regions of other membrane proteins.     

Bacteriophage receptor area of outer membrane protein OmpA of Escherichia coli K-12.

A number of T-even-like bacteriophages use the outer membrane protein OmpA of Escherichia coli as a receptor. We had previously analyzed a series of ompA mutants which are resistant to such phages and which still produce the OmpA protein (R. Morona, M. Klose, and U. Henning, J. Bacteriol. 159:570-578, 1984). Mutational alterations were found near or at residues 70, 110 and 154. Based on these and other results a model was proposed showing the amino-terminal half of the 325-residue protein crossing the outer membrane repeatedly and being cell surface exposed near residues 25, 70, 110, and 154. We characterized, by DNA sequence analysis, an additional 14 independently isolated phage-resistant ompA mutants which still synthesize the protein. Six of the mutants had alterations identical to the ones described before. The other eight mutants possessed seven new alterations: Ile-24----Asn, Gly-28----Val, deletion of Glu-68, Gly-70----Cys, Ser-108----Phe, Ser-108----Pro, and Gly-154----Asp (two isolates). Only the latter alteration resulted in a conjugation-deficient phenotype. The substitutions at Ile-24 and Gly-28 confirmed the expectation that this area of the protein also participates in its phage receptor region. It is unlikely that still other such sites of the protein are involved in the binding of phage, and it appears that the phage receptor area of the protein has now been characterized completely.     

Membrane topology and assembly of the outer membrane protein OmpA of Escherichia coli K12

The 325-residue outer membrane protein OmpA of Escherichia coli has been proposed to consist of a membrane-embedded moiety (residues 1 to about 170) and a C-terminal periplasmic region. The former is thought to comprise eight transmembrane segments in the form of antiparallel β-strands, forming an amphiphilic β connected by exposed turns. Several questions concerning this model were addressed. Thus no experimental evidence had been presented for the turns at the inner leaflet of the membrane and it was not known whether or not the periplasmic part of the polypeptide plays a role in the process of membrane incorporation. Oligonucleotides encoding trypsin cleavage sites were inserted at the predicted turn sites of the ompA gene and it was shown that the encoded proteins indeed become accessible to trypsin at the modified sites. Together with previous results, these data also show that the turns on both sides of the membrane do not possess specifically topogenic information. In two cases one of the two expected tryptic fragments was lost and could be detected at low concentration in only one case. Therefore, bilateral proteolytic digestion of outer membranes can cause loss of β-strands and does not necessarily produce a reliable picture of protein topology. When ompA genes were constructed coding for proteins ending at residue 228 or 274, the membrane assembly of these proteins was shown to be partially defective with about 20% of the proteins not being assembled. No such defect was observed when, following the introduction of a premature stop codon, a truncated protein was produced ending with residue 171. It is concluded that (1) the proposed β-barrel structure is essentially correct and (2) the periplasmic part of OmpA does not play an active role in, but can, when present in mutant form, interfere with membrane assembly.     

The N-terminal region of Escherichia coli lactose permease mediates membrane contact of the nascent polypeptide chain

Plasmids encoding N-terminal segments of the Escherichia coli lactose permease (also referred to as lactose carrier) have been used to analyze the biosynthesis and membrane insertion of this complex integral protein of the cytoplasmic membrane. Such truncated polypeptides were found to be stably associated with the membrane and to resemble the full-length protein with respect to their solubilization characteristics. Membrane-bound and free cytoplasmic polysomes were prepared from plasmid-bearing cells and incubated in the presence of [35S]methionine to permit completion of polypeptides initiated in vivo. Under these conditions, lactose permease was found to be radiolabeled in the fraction of membrane-bound polysomes; beta-galactosidase, used as a control, was translated almost exclusively by free polysomes. From similar experiments with N-terminal segments of lactose permease, we estimate that at most a polypeptide of 120 amino acid residues emerging from the ribosome is needed to target the nascent chain to the lipid bilayer and to mediate attachment of the ribosome to the membrane during elongation. Additional data support the idea that even shorter N-terminal sequences of 50 and 71 amino acid residues contain sufficient 'information' to provide contact with the membrane.     

Conjugation-deficient mutants of Escherichia coli distinguish classes of functions of the outer membrane OmpA protein

Summary Sixty-two E. coli mutants, selected as being deficient as recipients in F factor conjugation, are altered either in the amount or function of the outer membrane OmpA protein or in lipopolysaccharide structure. These two components may function together in conjugation, since the residual conjugation activity of a mutant lacking OmpA protein was unaffected by the additional presence of a lipopolysaccharide defect. Sixty of the strains carried mutations mapping to ompA, and these could be divided into classes depending on the amount of OmpA protein in their membranes. Representatives of these classes of mutant alleles failed to complement in diploids, indicating that they all affect the ompA structural gene and nearby sequences needed for its expression. The properties of these classes distinguish three groups of OmpA protein functions: 1) the structural function in the outer membrane in providing resistance to chelating agents and the hydrophobic antibiotic novobiocin, 2) the receptor functions in phage Tull^* and K3 infection, and 3) the functions of binding cells together during conjugation, facilitating the uptake of receptorbound colicin K or L, and allowing phage Ox2 to infect. Different cellular amounts or sites in OmpA protein are thus required for these three groups of functions.     

The Escherichia coli outer membrane protein OmpA acquires secondary structure prior to its integration into the membrane

Almost all proteins that reside in the outer membrane (OM) of Gram-negative bacteria contain a membrane-spanning segment that folds into a unique β barrel structure and inserts into the membrane by an unknown mechanism. To obtain further insight into outer membrane protein (OMP) biogenesis, we revisited the surprising observation reported over 20 years ago that the Escherichia coli OmpA β barrel can be assembled into a native structure in vivo when it is expressed as two noncovalently linked fragments. Here, we show that disulfide bonds between β strand 4 in the N-terminal fragment and β strand 5 in the C-terminal fragment can form in the periplasmic space and greatly increase the efficiency of assembly of “split” OmpA, but only if the cysteine residues are engineered in perfect register (i.e., they are aligned in the fully folded β barrel). In contrast, we observed only weak disulfide bonding between β strand 1 in the N-terminal fragment and β strand 8 in the C-terminal fragment that would form a closed or circularly permutated β barrel. Our results not only demonstrate that β barrels begin to fold into a β-sheet-like structure before they are integrated into the OM but also help to discriminate among the different models of OMP biogenesis that have been proposed.     

Export and sorting of theEscherichia coli outer membrane protein OmpA

Results of studies, mostly using the outer membrane, 325 residue protein OmpA, are reviewed which concern its translocation across the plasma membrane and incorporation into the outer membrane ofEscherichia coli. For translocation, neither a unique export signal, acting in a positive fashion within the mature part of the precursor, nor a unique conformation of the precursor is required. Rather, the mature part of a secretory protein has to be export-compatible. Export-incompatibility can be caused by a stretch of 16 (but not 8 or 12) hydrophobic residues, too low a size of the polypeptide (smaller than 75 residue precursors), net positive charge at the N-terminus, or lack of a turn potential at the same site. It is not yet clear whether binding sites for chaperonins (SecB, trigger factor, GroEL) within OmpA are importantin vivo. The mechanism of sorting of outer membrane proteins is not yet understood. The membrane part of OmpA, encompassing residues 1 to about 170, it thought to traverse the membrane eight times in antiparallel -sheet conformation. At least the structure of the last -strand (residues 160–170) is of crucial importance for membrane assembly. It must be amphiphilic or hydrophobic, these properties must extend over at least nine residues, and it must not contain a proline residue at or near its center. Membrane incorporation of OmpA involves a conformational change of the protein and it could be that the last -strand initiates folding and assembly in the outer membrane.     

Restoration of membrane incorporation of an Escherichia coli outer membrane protein (OmpA) defective in membrane insertion

The mechanism of sorting, to the outer membrane, of the 325-residue Escherichia coli protein OmpA has been investigated. It is thought to traverse the membrane eight times in antiparallel beta-strands, forming an amphiphilic beta-barrel which encompasses residues 1 to about 170; the COOH-terminal moiety is periplasmic. A mutant, carrying the substitutions Leu164----Pro and Val166----Asp within the last beta-strand (residues 160-170), has been described which was unable to assemble in the membrane (Klose, M., MacIntyre, S., Schwarz, H., and Henning, U. (1988) J. Biol. Chem. 263, 13297-13302). Linkers were inserted between the codons for residues 164 and 165 of the mutant protein. Of 13 different genes recovered, five encoded proteins which had regained the ability to assemble in the membrane. The properties of the mutant proteins, together with a structure prediction method, indicate the following rules for the final beta-strand to be compatible with, or possibly initiate, membrane insertion: (i) it must be amphiphilic or hydrophobic while its primary structure as such is fairly unimportant, (ii) it must extend over at least 9 residues, and (iii) it must not contain a proline residue around its center. One of the genes recovered coded for OmpA up to residue 164 and then followed by 10 linker-encoded residues. This 174-residue polypeptide was assembled in the membrane but did not, in contrast to all other proteins, expose sites sensitive to trypsin at the inner face of the membrane. This behavior agrees perfectly well with the OmpA model.     

Two-dimensional crystallization of Escherichia coli lactose permease

A chimeric protein consisting of lactose permease with cytochrome b562 in the middle cytoplasmic loop and six His residues at the C terminus (LacY/L6cytb562/417H6 or "red permease") was overexpressed in Escherichia coli and isolated by nickel affinity chromatography after solubilization with dodecyl-beta,d-maltopyranoside. Red permease was then reconstituted in the presence of phospholipids, yielding densely packed vesicles and well-ordered two-dimensional (2D) crystals as shown by electron microscopy of negatively stained specimens. Single-particle analysis of 16 383 protein particles in densely packed vesicles reveals a 5.4-nm-long trapeziform protein of 4.1 to 5.1 nm width, with a central stain-filled indentation. Depending on reconstitution conditions, trigonal and rectangular crystallographic packing arrangements of these elongated particles assembled into trimers are observed. The best ordered 2D crystals exhibit a rectangular unit cell, of dimensions a = 9.9 nm, b = 17.4 nm, that houses two trimeric complexes. Projection maps calculated to a resolution of 2 nm show that these crystals consist of two layers.     

Escherichia coli K-12 outer membrane protein (OmpA) as a bacteriophage receptor: analysis of mutant genes expressing altered proteins.

The outer membrane protein OmpA of Escherichia coli K-12 serves as a receptor for a number of T-even-like phages. We have isolated a series of ompA mutants which are resistant to such phages but which still produce the OmpA protein. None of the mutants was able to either irreversibly or reversibly bind the phage with which they had been selected. Also, the OmpA protein is required for the action of colicins K and L and for the stabilization of mating aggregates in conjugation. Conjugal proficiency was unaltered in all cases. Various degrees of colicin resistance was found; however, the resistance pattern did not correlate with the phage resistance pattern. DNA sequence analyses revealed that, in the mutants, the 325-residue OmpA protein had suffered the following alterations: Gly-65----Asp, Gly-65----Arg, Glu-68----Gly, Glu-68----Lys (two isolates), Gly-70----Asp (four isolates), Gly-70----Val, Ala-Asp-Thr-Lys-107----Ala-Lys (caused by a 6-base-pair deletion), Val-110----Asp, and Gly-154----Ser. These mutants exhibited a complex pattern of resistance-sensitivity to 14 different OmpA-specific phages, suggesting that they recognize different areas of the protein. In addition to the three clusters of mutational alterations around residues 68, 110, and 154, a site around residue 25 has been predicted to be involved in conjugation and in binding of a phage and a bacteriocin (R. Freudl, and S. T. Cole, Eur. J. Biochem, 134:497-502, 1983; G. Braun and S. T. Cole, Mol. Gen. Genet, in press). These four areas are regularly spaced, being about 40 residues apart from each other. A model is suggested in which the OmpA polypeptide repeatedly traverses the outer membrane in cross-beta structure, exposing the four areas to the outside.     

Topography of lactose permease from Escherichia coli

The topography of lactose permease, in native membrane vesicles and after reconstitution of the purified protein into proteoliposomes, has been investigated by labeling the membrane-embedded portions of the protein using photoactivatable, hydrophobic reagents and by labeling the exposed portions of the protein with water-soluble, electrophilic reagents. Some sites of modification have been localized in fragments of the protein produced by chemical and enzymatic cleavage. These define a number of hydrophilic loops and membrane-spanning regions and give some substance to topographic models of the permease. The N-terminal third of the molecule was labeled by three photoactivatable reagents (3-(trifluoromethyl)-3-m-iodophenyldiazirine and the phospholipid analogues 2-(aceto-(4-benzoylphenylether]-1-palmitoylphosphatidylcholine) and 2-(4-azido-2-nitrophenylaminoacetyl)-1-palmitoylphosphatidylcholin e) as well as the water soluble, electrophilic reagents. The C-terminal part of the molecule is labeled by the diazirine and, to a lesser extent, by the phospholipid analogues. It apparently has more nucleophilic groups accessible to water-soluble reagents than the N-terminal domain, in which the density of apparently unreactive ionizable residues proved to be unexpectedly high. The apparent lack of reactivity of some of these residues may be explained either by their being buried in the protein moiety within the membrane domain, or by their close association with other ionizable residues on the surface of the protein.     

Transport by the lactose permease of Escherichia coli as the basis of lactose killing.

Lactose killing is a peculiar phenomenon in which 80 to 98% of the Escherichia coli cells taken from a lactose-limited chemostat die when plated on standard lactose minimal media. This unique form of suicide is caused by the action of the lactose permease. Since uptake of either lactose or galactose by the lactose permease caused death, the action of rapid transport across the membrane must be the cause of the phenomenon. Alternative causes of lactose killing, such as accumulation of toxic metabolic intermediates or action of the beta-galactosidase, have been eliminated. It is proposed that rapid uptake of sugars by the lactose permease disrupts membrane function, perhaps causing collapse of the membrane potential.     

Pseudomonas aeruginosa outer membrane protein F: structural role and relationship to the Escherichia coli OmpA protein.

A Pseudomonas aeruginosa outer membrane protein F-deficient omega-insertion mutant strain H636, in contrast to its protein F-sufficient parent strain H103, was unable to grow on unsupplemented Proteose Peptone no. 2 broth (Difco Laboratories, Detroit, Mich.). Addition of high concentrations of NaCl, KCl, glucose, sucrose, or potassium succinate permitted growth of strain H636 at rates approaching those of the parent strain H103. Strain H636 cells were 33% shorter and had a 46% smaller cross-sectional area than did the parent strain growing at similar rates on the same medium. These properties of the oprF::omega mutant were analogous to those previously observed for Escherichia coli ompA mutants in an lpp (Braun lipoprotein-deficient) mutant background. Therefore, we compared P. aeruginosa protein F and the E. coli OmpA protein. In addition to many similarities previously described, sequence alignment demonstrated substantial amino acid sequence homology throughout the carboxy-terminal 168 to 180 amino acids of the two proteins. Consistent with this observation, polyclonal antiserum specific for OmpA reacted on Western blots (immunoblots) with protein F. Expression of protein F from the cloned oprF gene in an E. coli ompA lpp double mutant resulted in a 1.7-fold increase in cell length and a 2.1-fold increase in cross-sectional area compared with values for the same mutant containing only the plasmid vector onto which the oprF gene had been cloned. These results favor a structural role for P. aeruginosa protein F and suggest that it is strongly related to the E. coli OmpA protein.     

TolB protein of Escherichia coli K-12 interacts with the outer membrane peptidoglycan-associated proteins Pal, Lpp and OmpA

The Tol–Pal proteins of Escherichia coli are involved in maintaining outer membrane integrity. Transmembrane domains of TolQ, TolR and TolA interact in the cytoplasmic membrane, while TolB and Pal form a complex near the outer membrane. TolB and the central domain of TolA interact in vitro with the outer membrane porins. In this study, both genetic and biochemical analyses were carried out to analyse the links between TolB, Pal and other components of the cell envelope. It was shown that TolB could be cross-linked in vivo with Pal, OmpA and Lpp, while Pal was associated with TolB and OmpA. The isolation of pal and tolB mutants disrupting some interactions between these proteins represents a first approach to characterizing the residues contributing to the interactions. We propose that TolB and Pal are part of a multiprotein complex that links the peptidoglycan to the outer membrane. The Tol–Pal proteins might form transenvelope complexes that bring the two membranes into close proximity and help some outer membrane components to reach their final destination.     

Conformation of Escherichia coli outer membrane protein OmpA produced in Bacillus subtilis: Influence of lipopolysaccharide

Abstract The conformation of the outer membrane protein OmpA of Escherichia coli produced in Bacillus subtilis and solubilized in Sarkosyl was studied by measuring its ability to bind OmpA-specific phage K3 and to inhibit F-mediated conjugation. The partially purified protein was inactive in both these assays. Refolding of the protein in the presence of lipopolysaccharide resulted in preparations with full phage-binding and conjugation-inhibiting capacity, indicating the formation of surface-exposed loops of OmpA of native conformation. The finding is of importance for the potential use of outer membrane proteins of Gram-negative bacteria as vaccines.     

An outer membrane protein (OmpA) of Escherichia coli K-12 undergoes a conformational change during export

Pulse-chase experiments were performed to follow the export of the Escherichia coli outer membrane protein OmpA. Besides the pro-OmpA protein, which carries a 21-residue signal sequence, three species of ompA gene products were distinguishable. One probably represented an incomplete nascent chain, another the mature protein in the outer membrane, and the third, designated imp-OmpA (immature processed), a protein which was already processed but apparently was still associated with the plasma membrane. The pro- and imp-OmpA proteins could be characterized more fully by using a strain overproducing the ompA gene products; pro- and imp-OmpA accumulated in large amounts. It could be shown that the imp- and pro-OmpA proteins differ markedly in conformation from the OmpA protein. The imp-OmpA, but not the pro-OmpA, underwent a conformational change and gained phage receptor activity upon addition of lipopolysaccharide. Utilizing a difference in detergent solubility between the two polypeptides and employing immunoelectron microscopy, it could be demonstrated that the pro-OmpA protein accumulated in the cytoplasm while the imp-OmpA was present in the periplasmic space. The results suggest that the pro-OmpA protein, bound to the plasma membrane, is processed, and the resulting imp-OmpA, still associated with the plasma membrane, recognizes the lipid A moiety of the lipopolysaccharide. The resulting conformational change may then force the protein into the outer membrane.     

Sugar recognition by the lactose permease of Escherichia coli

Biochemical, luminescence and mass spectroscopy approaches indicate that Trp-151 (helix V) plays an important role in hydrophobic stacking with the galactopyranosyl ring of substrate and that Glu-269 (helix VIII) is essential for substrate affinity and specificity. The x-ray structure of the lactose permease (LacY) with bound substrate is consistent with these conclusions and suggests that a possible H-bond between Glu-269 and Trp-151 may play a critical role in the architecture of the binding site. We have now probed this relationship by exploiting the intrinsic luminescence of a single Trp-151 LacY with various replacements for Glu-269. Mutations at position 269 dramatically alter the environment of Trp-151 in a manner that correlates with binding affinity of LacY substrates. Furthermore, chemical modification of Trp-151 with N-bromosuccinimide indicates that Glu-269 forms an H-bond with the indole N. It is concluded that 1) an H-bond between the indole N and Glu-269 optimizes the formation of the substrate binding site in the inward facing conformation of LacY, and 2) the disposition of the residues implicated in sugar binding in different conformers suggests that sugar binding by LacY involves induced fit.     

Limited proteolysis of lactose permease from Escherichia coli

Escherichia coli lactose permease (also referred to as lactose carrier) is an integral protein of the cytoplasmic membrane. Using lactose permease either radiolabeled biosynthetically in plasmid-bearing E. coli minicells or radioalkylated post-synthetically by chemical modification, we have determined sites on the membrane-bound protein accessible to proteolytic attack and we have characterized several high-molecular-mass products. The most prominent polypeptide obtained from lactose permease radiolabeled biosynthetically is observed after digestion with different proteases. The fragment produced by thermolysin was shown to contain the intact N-terminus and to extend into the region around amino acid residue 140 which, according to secondary structure models, is presumed to be less tightly folded than the rest of the molecule. Evidence is presented that the corresponding fragments obtained after digestion with several other proteases also originate from the N-terminal part of the protein. This N-terminal segment of the lactose carrier is resistant to proteolytic digestion even in the presence of non-ionic detergents and it may represent a tightly folded domain. Additional proteolytic cleavage sites located C-terminal of the Cys148 residue can be inferred.