Smart hydrogels based on semi-interpenetrating polymeric networks of collagen-polyurethane-alginate for soft/hard tissue healing,drug delivery devices,and anticancer therapies

In this work, hydrogels based on semi-interpenetrating polymeric networks (semi-IPN) based on collagen-polyurethane-alginate were studied physicochemically and from different approaches for biomedical application. It was determined that the matrices in the hydrogel state are crosslinked by the formation of urea and amide bonds between the biopolymer chains and the polyurethane crosslinker. The increment in alginate content (0–40 wt%) significantly increases the swelling capacity, generating semi-crystalline granular structures with improved storage modulus and resistance to thermal, hydrolytic, and proteolytic degradation. The in vitro bioactivity results indicated that the composition of these novel hydrogels stimulates the metabolic activity of monocytes and fibroblasts, benefiting their proliferation; while in cancer cell lines, it was determined that the composition of these biomaterials decreases the metabolic activity of breast cancer cells after 48 h of stimulation, and for colon cancer cells their metabolic activity decreases after 72 h of contact for the hydrogel with 40 wt% alginate. The matrices show a behavior of multidose release of ketorolac, and a higher concentration of analgesic is released in the semi-IPN matrix. The inhibition capacity of Escherichia coli is higher if the polysaccharide concentration is low (10 wt%). The in vitro wound closure test (scratch test) results indicate that the hydrogel with 20 wt% alginate shows an improvement in wound closure at 15 days of contact. Finally, the bioactivity of mineralization was evaluated to demonstrate that these hydrogels can induce the formation of carbonated apatite on their surface. The engineered hydrogels show biomedical multifunctionality and they could be applied in soft and hard tissue healing strategies, anticancer therapies, and drug release devices.     

Facile synthesis and characterization of disulfide-cross-linked hyaluronic acid hydrogels for protein delivery and cell encapsulation

Injectable hyaluronic acid (HA) hydrogels cross-linked via disulfide bond are synthesized using a thiol-disulfide exchange reaction. The production of small-molecule reaction product, pyridine-2-thione, allows the hydrogel formation process to be monitored quantitatively in real-time by UV spectroscopy. Rheological tests show that the hydrogels formed within minutes at 37 °C. Mechanical properties and equilibrium swelling degree of the hydrogels can be controlled by varying the ratio of HA pyridyl disulfide and macro-cross-linker PEG-dithiol. Degradation of the hydrogels was achieved both enzymatically and chemically by disulfide reduction with distinctly different kinetics and profiles. In the presence of hyaluronidase, hydrogel mass loss over time was linear and the degradation was faster at higher enzyme concentrations, suggesting surface-limited degradation. The kinetics of hydrogel erosion by glutathione was not linear, nor did the erosion rate correlate linearly with glutathione concentration, suggesting a bulk erosion mechanism. A cysteine-containing chemokine, stromal cell-derived factor 1α, was successfully encapsulated in the hydrogel and released in vitro without chemical alteration. Several different cell types, including fibroblasts, endothelial cells, and mesenchymal stem cells, were successfully encapsulated in the hydrogels with high cell viability during and after the encapsulation process. Substantial cell viability in the hydrogels was maintained up to 7 days in culture despite the lack of adhesion between the HA matrix and the cells. The facile synthesis of disulfide-cross-linked, dual-responsive degradable HA hydrogels may enable further development of bioactive matrices potentially suitable for tissue engineering and drug delivery applications.     

Synthesis and characterizations of in situ cross-linkable gelatin and 4-arm-PPO-PEO hybrid hydrogels via enzymatic reaction for tissue regenerative medicine

In situ cross-linkable hybrid hydrogels composed of gelatin and 4-arm-polypropylene oxide-polyethylene oxide (Tetronic) was developed as an injectable scaffold for tissue regeneration. The gelatin was modified by hydroxyphenyl propionic acid (HPA) and the Tetronic was conjugated with tyramines (Tet-TA). The hydrogels were rapidly formed by mixing the polymer solutions containing horseradish peroxidase (HRP) and hydrogen peroxide (H(2)O(2)). The gelation time and mechanical properties of the hydrogels could be controlled by varying the HRP and H(2)O(2) concentrations. In vitro degradation study of the hybrid hydrogels was carried out using collagenase and the prolonged proteolytic degradation was obtained due to the presence of the Tetronic. Human dermal fibroblast (hDFB) was cultured in the hydrogel matrices to evaluate the cyto-compatibility. The encapsulated cells were shown to be highly viable and spread over the gel matrices, suggesting that the hybrid hydrogels have an excellent cyto-compatibility. The hydrogels were also subcutaneously injected in the back of mice and the results demonstrated that the hydrogels were rapidly formed at the injected site. From these results, we demonstrate that the in situ cross-linkable hydrogels formed by hybridization of gelatin and Tetronic via enzyme-mediated reactions hold great promise for use as injectable matrices for tissue regenerative medicine due to their tunable physico-chemical properties and excellent bioactivity.     

A saccharide-based supramolecular hydrogel for cell culture

It is well known that the saccharides forming the intricate sugar coat that surrounds the cells play important biological roles in intercellular communication and cell differentiation. Therefore, it is worthwhile developing saccharide-based hydrogels for cell culture study. In this study, three novel saccharide-based compounds were designed and synthesized. It was found that one of them could form hydrogels efficiently, while the other two precipitated from water. The stability of the resulting hydrogel was tested, and the supramolecular nanofiber with fiber diameters in the range of 80–300 nm was characterized as the structural element by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Fluorescence microscopy revealed that extensive hydrogen bonds between sugar rings assisted the formation of efficient π–π stacking between aromatic naphthalene groups, thus resulting in the formation of a stable hydrogel in aqueous solution. When the gel was applied for mouse embryonic fibroblast (NIH 3T3), human hepatocellular carcinoma (HepG2), AD293 and HeLa cells culture in two dimensional environments, all of them showed a very good adhesion and good proliferation rate on the top of the hydrogel. These results indicates that the biocompatible hydrogel reported here has a potential to be developed into useful materials for in vitro cell culture, drug delivery, and tissue engineering.     

Characterization of photo-cross-linked oligo[poly(ethylene glycol) fumarate] hydrogels for cartilage tissue engineering

Photo-cross-linkable oligo[poly(ethylene glycol) fumarate] (OPF) hydrogels have been developed for use in tissue engineering applications. We demonstrated that compressive modulus of these hydrogels increased with increasing polymer concentration, and hydrogels with different mechanical properties were formed by altering the ratio of cross-linker/polymer in precursor solution. Conversely, swelling of hydrogels decreased with increasing polymer concentration and cross-linker/polymer ratio. These hydrogels are degradable and degradation rates vary with the change in cross-linking level. Chondrocyte attachment was quantified as a method for evaluating adhesion of cells to the hydrogels. These data revealed that cross-linking density affects cell behavior on the hydrogel surfaces. Cell attachment was greater on the samples with increased cross-linking density. Chondrocytes on these samples exhibited spread morphology with distinct actin stress fibers, whereas they maintained their rounded morphology on the samples with lower cross-linking density. Moreover, chondrocytes were photoencapsulated within various hydrogel networks. Our results revealed that cells encapsulated within 2-mm thick OPF hydrogel disks remained viable throughout the 3-week culture period, with no difference in viability across the thickness of hydrogels. Photoencapsulated chondrocytes expressed the mRNA of type II collagen and produced cartilaginous matrix within the hydrogel constructs after three weeks. These findings suggest that photo-cross-linkable OPF hydrogels may be useful for cartilage tissue engineering and cell delivery applications.     

Modulation of bone marrow mesenchymal stem cell secretome by ECM-like hydrogels

It has been demonstrated that bone marrow mesenchymal stem cell (BM-MSCs) transplantation has beneficial effects on several central nervous system (CNS) debilitating conditions. Growing evidence indicate that trophic factors secreted by these cells are the key mechanism by which they are acting. These cells are frequently used in combination with 3D artificial matrices, for instance hydrogels, in tissue engineering-based approaches. However, so far, no study has been reported on the influence of such matrices, namely the presence or absence of extracellular matrix motifs, on BM-MSCs secretome and its effects in neuronal cell populations. In this sense, we herein studied the impact of a hydrogel, gellan gum, on the behavior and secretome of BM-MSCs, both in its commercial available form (commonly used in tissue engineering) and in a fibronectin peptide-modified form. The results showed that in the presence of a peptide in the gellan gum hydrogel, BM-MSCs presented higher proliferation and metabolic activity than in the regular hydrogel. Moreover, the typical spindle shape morphology of BM-MSCs was only observed in the modified hydrogel. The effects of the secretome of BM-MSCs were also affected by the chemical nature of the extracellular matrix. BM-MSCs cultured in the modified hydrogel were able to secrete factors that induced higher metabolic viabilities and neuronal cell densities, when compared to those of the unmodified hydrogel. Thus adding a peptide sequence to the gellan gum had a significant effect on the morphology, activity, proliferation and secretome of BM-MSCs. These results highlight the importance of mimicking the extracellular matrix when BM-MSCs are cultured in hydrogels for CNS applications.     

Mammalian cell-seeded hydrogel microarrays printed via dip-pin technology

Although significant advances have been made in the development of DNA and protein microarrays, less effort has been put toward developing mammalian cell microarrays. Such cellular microarrays may be useful in examining the effects of biological or chemical agents on cells, particularly in drug development and toxicological applications. Here, mammalian cell-seeded hydrogel microarrays were created using two different commercial microarrayers, with four different pin types. Human dermal fibroblasts were used here as a model cell type, seeded within polyethylene glycol-based hydrogels similar to those under investigation as tissue engineering scaffolds, which serve as synthetic extracellular matrices for the cells. Spot sizes of the hydrogels were found to vary with pin type. Multiple touches on a slide following a single dip in the reservoir print solution led to decreasing spot size with each touch; therefore, subsequent microarrays were printed with single touches after a dip. Individual pins of the same type and tip diameter had significantly different spot sizes, likely due to wear of the pins at the tip. However there was high run-to-run reproducibility between subsequent microarrays. Cell viability varied with pin type, and the number of cells per spot varied with cell density in the print solution, as expected.     

Stiffness of photocrosslinkable gelatin hydrogel influences nucleus pulposus cell propertiesin vitro

A key early sign of degenerative disc disease (DDD) is the loss of nucleus pulposus (NP) cells (NPCs). Accordingly, NPC transplantation is a treatment strategy for intervertebral disc (IVD) degeneration. However, in advanced DDD, due to structural damage of the IVD and scaffold mechanical properties, the transplanted cells are less viable and secrete less extracellular matrix, and thus, are unable to efficiently promote NP regeneration. In this study, we evaluated the encapsulation of NPCs in a photosensitive hydrogel made of collagen hydrolysate gelatin and methacrylate (GelMA) to improve NP regeneration. By adjusting the concentration of GelMA, we prepared hydrogels with different mechanical properties. After examining the mechanical properties, cell compatibility and tissue engineering indices of the GelMA-based hydrogels, we determined the optimal hydrogel concentration of the NPC-encapsulating GelMA hydrogel for NP regeneration as 5%. NPCs effectively combined with GelMA and proliferated. As the concentration of the GelMA hydrogel increased, the survival, proliferation and matrix deposition of the encapsulated NPCs gradually decreased, which is the opposite of NPCs grown on the surface of the hydrogel. The controllability of the GelMA hydrogels suggests that these NPC-encapsulating hydrogels are promising candidates to aid in NP tissue engineering and repairing endogenous NPCs.     

In vitro study of the interaction of polyalkilimide and polyvinyl alcohol hydrogels with cells

Hydrogels are a class of polymers that in the last decade have had a great development and application for soft tissue augmentation, due to their similarity to this tissue for their high water content. The in vitro effects of polyalkylmide hydrogel (pAI) and polyvinyl alcohol hydrogel (pVOH) on human lymphocytes and U937 cells viability, apoptosis and cell shape were investigated. Cell viability was always higher than 70%, thus showing the hydrogels were not cytotoxic for both cell lines. Some differences were, however, found. At short time, lymphocytes were very sensitive to the hydrogels incubation, while at long time, U937 cells were the most sensitive cells. Other differences on cell viability were related to the time of incubation, to the type of hydrogel and to the polymers concentration. Cell viability decreased only at the longest time of incubation and with the highest hydrogel concentration. Accordingly, cell death by apoptosis increased; necrosis was never observed in the cultures. Concentration- and hydrogel-dependent modifications of cell shape (bigger cell volume, elongations of cells) were observed in a few percentage of viable cells. In conclusion, the very high in vitro degree of biocompatibility shown by both hydrogels encourages their use as dermal fillers.     

An approach to modulate degradation and mesenchymal stem cell behavior in poly(ethylene glycol) networks

A simple, sequential approach for creation of hydrolytically degradable poly(ethylene glycol) (PEG) hydrogels has been developed and characterized. The chemistry involves an initial step growth polymerization reaction between PEG-diacrylate and dithiothreitol (DTT) to form acrylate-terminated (-PEG-DTT-)n PEG chains, followed by photocross-linking to form a hydrogel network. Varying the extent of step growth polymerization prior to photocross-linking allowed for control over the equilibrium swelling ratio, degradation, and erosion of PEG hydrogels. Hydrogel degradability had a significant effect on behavior of human mesenchymal stem cells (hMSCs) encapsulated within PEG hydrogels, both in the presence and absence of an RGDSP cell adhesion ligand. In particular, enhanced network degradability resulted in enhanced hMSC viability and spreading during in vitro culture. Comparison of degradable and nondegradable hydrogels with similar physical properties (e.g., equilibrium swelling ratio) demonstrated that hMSC viability and spreading were dependent on network degradability. This study demonstrates that hydrolytically degradable PEG hydrogels can be formed via a sequential step growth polymerization and photocross-linking process and the resulting materials may serve as promising matrices for 3-dimensional stem cell culture and tissue engineering applications.     

Synthesis and characterization of thermally and chemically gelling injectable hydrogels for tissue engineering

Novel, injectable hydrogels were developed that solidify through a physical and chemical dual-gelation mechanism upon preparation and elevation of temperature to 37 °C. A thermogelling, poly(N-isopropylacrylamide)-based macromer with pendant epoxy rings and a hydrolytically degradable polyamidoamine-based diamine cross-linker were synthesized, characterized, and combined to produce in situ forming hydrogel constructs. Network formation through the epoxy-amine reaction was shown to be rapid and facile, and the progressive incorporation of the hydrophilic polyamidoamine cross-linker into the hydrogel was shown to mitigate the often problematic tendency of thermogelling materials to undergo significant postformation gel syneresis. The results suggest that this novel class of injectable hydrogels may be attractive substrates for tissue engineering applications due to the synthetic versatility of the component materials and beneficial hydrogel gelation kinetics and stability.     

In vitro cytotoxicity of unsaturated oligo[poly(ethylene glycol) fumarate] macromers and their cross-linked hydrogels

Currently, oligo[poly(ethylene glycol) fumarate] (OPF) hydrogels are being investigated as an injectable and biodegradable system for tissue engineering applications. In this study, cytotoxicity of each component of the OPF hydrogel formulation and the resulting cross-linked network was examined. Specifically, OPF synthesized with poly(ethylene glycol) (PEG) of different molecular weights (MW), the cross-linking agent [PEG-diacrylate (PEG-DA)], and the redox initiator pair [ammonium persulfate (APS) and ascorbic acid (AA)] were evaluated for cytotoxicity at 2 and 24 h using marrow stromal cells (MSCs) as model cells. The effect of leachable byproducts of OPF hydrogels on cytotoxicity was also investigated. Upon exposure to various concentrations of OPF for 2 h, greater than 50% of the MSCs were viable, regardless of OPF molecular weight or concentration in the media. After 24 h, the MSCs maintained more than 75% viability except for OPF concentrations higher than 25% (w/v). When examining the cross-linking agent, PEG-DA of higher MW (3400) demonstrated significantly higher viability compared to PEG-DA with MW 575 at all concentrations tested. Considering initiators, when MSCs were exposed to AA and APS, as well as the combination of AA and APS, higher viability was observed at lower concentrations. Once cross-linked, the leachable products from the OPF hydrogels had minimal adverse effects on the viability of MSCs (percentage of live cells was higher than 90% regardless of hydrogel types). The results suggest that, after optimization of cross-linking parameters, OPF-based hydrogels hold promise as novel injectable scaffolds or cell carriers in tissue engineering.     

Arginine functionalization of hydrogels for heparin binding—a supramolecular approach to developing a pro‐angiogenic biomaterial

Our aim was to synthesize a biomaterial that stimulates angiogenesis for tissue engineering applications by exploiting the ability of heparin to bind and release vascular endothelial growth factor (VEGF). The approach adopted involved modification of a hydrogel with positively charged peptides (oligolysine or oligoarginine) to achieve heparin binding. Precursor hydrogels were produced from copolymerization of N‐vinyl pyrolidone, diethylene glycol bis allyl carbonate and acrylic acid (PNDA) and functionalized after activation of the carboxylic acid groups with trilysine or triarginine peptides (PNDKKK and PNDRRR). Both hydrogels were shown to bind and release bioactive VEGF165 with arginine‐modified hydrogel outperforming the lysine‐modified hydrogel. Cytocompatibility of the hydrogels was confirmed in vitro with primary human dermal fibroblasts and human dermal microvascular endothelial cells (HUDMECs). Proliferation of HUDMECs was stimulated by triarginine‐functionalized hydrogels, and to a lesser extent by lysine functionalized hydrogels once loaded with heparin and VEGF. The data suggests that heparin‐binding hydrogels provide a promising approach to a pro‐angiogenic biomaterial. Biotechnol. Bioeng. 2013; 110: 296–317. © 2012 Wiley Periodicals, Inc.     

Preparation of Hydroxy-PAAm Hydrogels for Decoupling the Effects of Mechanotransduction Cues

It is now well established that many cellular functions are regulated by interactions of cells with physicochemical and mechanical cues of their extracellular matrix (ECM) environment. Eukaryotic cells constantly sense their local microenvironment through surface mechanosensors to transduce physical changes of ECM into biochemical signals, and integrate these signals to achieve specific changes in gene expression. Interestingly, physicochemical and mechanical parameters of the ECM can couple with each other to regulate cell fate. Therefore, a key to understanding mechanotransduction is to decouple the relative contribution of ECM cues on cellular functions.Here we present a detailed experimental protocol to rapidly and easily generate biologically relevant hydrogels for the independent tuning of mechanotransduction cues in vitro. We chemically modified polyacrylamide hydrogels (PAAm) to surmount their intrinsically non-adhesive properties by incorporating hydroxyl-functionalized acrylamide monomers during the polymerization. We obtained a novel PAAm hydrogel, called hydroxy-PAAm, which permits immobilization of any desired nature of ECM proteins. The combination of hydroxy-PAAm hydrogels with microcontact printing allows to independently control the morphology of single-cells, the matrix stiffness, the nature and the density of ECM proteins. We provide a simple and rapid method that can be set up in every biology lab to study in vitro cell mechanotransduction processes. We validate this novel two-dimensional platform by conducting experiments on endothelial cells that demonstrate a mechanical coupling between ECM stiffness and the nucleus.     

RNA extraction from polysaccharide-based cell-laden hydrogel scaffolds

An effective method for obtaining high-quality RNA from polysaccharide-rich hydrogels would be of great interest to biomaterialists and tissue engineers. Based on the similarities between polysaccharide-based hydrogels and plant tissues, we used a plant-specific RNA extraction kit to extract RNA from mammalian cells encapsulated in hydrogel scaffolds. The results indicate that this method can be reliably used in isolating high-purity RNA from polysaccharide hydrogels.     

基于天然水凝胶的生物材料在骨组织工程中的应用*

天然水凝胶是指原材料来自于天然生物材料的水凝胶。由于这种天然的聚合物含有构成生物体的天然成分,与天然组织具有生物学和化学相似性,而受到特别关注。天然水凝胶由于其与细胞外基质高度的相似性被认为是骨组织工程中优良的仿生基质材料。而针对天然水凝胶机械性能差、成骨诱导性能弱等缺陷,通常需要对天然水凝胶进行改性、引入其他材料或生物活性因子,以此来获得更适用于骨组织工程支架材料。对近年来基于天然水凝胶的生物材料在骨组织工程的应用,与其不同的应用形式(可注射水凝胶、多孔水凝胶支架、3D生物打印水凝胶支架等)进行了概述,以期对这类基于天然水凝胶的生物材料在未来骨组织工程中的应用提供参考。     

Synthesis and evaluation of novel biodegradable hydrogels based on poly(ethylene glycol) and sebacic acid as tissue engineering scaffolds

Novel biodegradable poly(ethylene glycol) (PEG) based hydrogels, namely, PEG sebacate diacrylate (PEGSDA) were synthesized, and their properties were evaluated. Chemical structures of these polymers were confirmed by Fourier transform infrared and proton nuclear magnetic resonance (1H NMR) spectroscopy. After photopolymerization, the dynamic shear modulus of the hydrogels was up to 0.2 MPa for 50% PEGSDA hydrogel, significantly higher than conventional hydrogels such as PEG diacrylate (PEGDA). The swelling ratios of these macromers were significantly lower than PEGDA. The in vitro degradation study demonstrated that these hydrogels were biodegradable with weight losses about 66% and 32% for 25% and 50% PEGSDA after 8 weeks of incubation in phosphate-buffered saline at 37 degrees C. In vitro biocompatibility was assessed using cultured rat bone marrow stromal cells (MSCs) in the presence of unreacted monomers or degradation products. Unlike conventional PEGDA hydrogels, PEGSDA hydrogel without RGD peptide modification induced MSC cell adhesion similar to tissue culture polystyrene. Finally, complex three-dimensional structures of PEGSDA hydrogels using solid free form technique were fabricated and their structure integrity was better maintained than PEGDA hydrogels. These hydrogels may find use as scaffolds for tissue engineering applications.     

Entrapment and in vitro release of delta-sleep inducing peptide from polymer hydrogels based on modified polyvinyl alcohol

The aim of this study was to entrap delta-sleep inducing peptide (DSIP) in cross-linked poly(vinyl alcohol)-based hydrogels of different structures and to determine kinetics of the peptide release from these hydrogels using an in vitro model. Isotropic and macroporous hydrogels based on poly(vinyl alcohol) acrylic derivative (Acr-PVA) and also macroporous epoxy groups containing hydrogels synthesized by copolymerization of this macromer and glycidyl methacrylate, have been used in this study. Isotropic hydrogels were prepared at positive temperatures while macroporous ones were obtained by formation in cryo-conditions. The peptide was entrapped into macroporous PVA hydrogels by adding the peptide solution onto preformed matrices, while peptide immobilization on PVA-GMA hydrogels, containing free epoxy groups, was carried out by sorption of peptide from its aqueous solution. In the case of DSIP entrapment into isotropic PVA gel the peptide solution was added into the polymer mixture at hydrogel formation. The kinetics of peptide release from hydrogels was studied by incubating matrices in PBS solution (pH 7.4), in physiological solution (0.9% NaCl) and in water. DSIP concentration in supernatants was determined by reverse-phase HPLC. Incubation of macroporous PVA gels in PBS, 0.9% NaCl, and water for 30 min caused release of 74, 70, and 64% DSIP, respectively, and this processes completed within 3 h. From hydrogel containing epoxy groups the release of neither peptide nor its degradation products was observed even after incubation for 48 h. For freshly prepared isotropic hydrogel the release kinetics was as follows: 27 and 78% DSIP were released within first 30 min and 33 h, relatively. For the lyophilized hydrogel samples the peptide release was 63% after incubation for 30 min, while drying of samples at room temperature for 3 days caused significant peptide loss because of its structure damage.     

Dextran and hyaluronan methacrylate based hydrogels as matrices for soft tissue reconstruction

Polysaccharide hydrogels have become increasingly studied as matrices in soft tissue engineering because of their known cytocompatibility. In this work cross-linkable dextran methacrylates and hyaluronan methacrylate were synthesized and their transformation into stable hydrogels was studied. The in vitro degradation behaviour of the formed hydrogels could be controlled by the polysaccharide structure and the cross-linking density. Under in vitro conditions, the formed gels had no cytotoxic effects against fibroblasts, but cells could adhere only inefficiently in long term experiments. The use of composite gels improved the adherence of cells. Different scaffold architectures were studied including porous structures and perforated gel layers. Selected hydrogels were examined in an in vivo pilot study using a rabbit model to evaluate their biocompatibility, stability and degradation. No signs of inflammation were seen and with prolonged duration the material was degraded and lacunas were formed by immigrating or ingrowing cells. Optimizing their mechanical properties, the formed hydrogels represent promising candidates as matrices for soft tissue reconstruction.     

One-step synthesis of biodegradable curcumin-derived hydrogels as potential soft tissue fillers after breast cancer surgery

A one-step synthesis of a curcumin-derived hydrogel (curcumin content of 25-75 mol %) is reported. Curcumin is incorporated into the hydrogel backbone and cross-linked through biodegradable carbonate linkages. Curcumin as a part of the polymer backbone is protected from oxidation and degradation, while hydrogel hydrolysis results in the release of active curcumin. Nontoxic poly(ethylene glycol) and desaminotyrosyl-tyrosine ethyl ester are used to tune the hydrophilic/hydrophobic hydrogel properties. In this way, hydrogels with a wide range of physical properties including water-uptake (100-550%) and compression moduli (7-100 kPa) were obtained. Curcumin release is swelling-controlled and could be extended to 80 days. In vitro, curcumin-derived hydrogels showed selective cytotoxicity against MDA-MB-231 (IC(50) 9 μM) breast cancer cells but no cytotoxicity to noncancerous quiescent human dermal fibroblasts even at high curcumin concentrations (160 μM). One possible application of these curcumin-derived hydrogels is as soft tissue filler after surgical removal of cancerous tissue.