Dissolution and immunochemical analysis of the sheath of the archaeobacterium Methanospirillum hungatei GP1.

The sheath of Methanospirillum hungatei GP1 was degraded by three dissolution techniques, which produced a range of soluble products. By using 0.05 M L-arginine buffer (pH 12.6) at 90 degrees C for 10 min, 74% (dry weight) of the sheath was dissolved; however, the solubilized polypeptides were extensively degraded. Treatment with 2% beta-mercaptoethanol and 2% sodium dodecyl sulfate at 90 degrees C in 0.05 M 2(N-cyclohexylamino)ethanesulfonic acid (CHES) buffer (pH 9.0) solubilized 42% (dry weight) of the sheath as a group of polypeptides of 30 to 40 kDa. At 100 degrees C for 2 h, 5% beta-mercaptoethanol, 2% sodium dodecyl sulfate (SDS), and 20 mM EDTA released 74% of the sheath's mass as a group of polypeptides of 10 to 40 kDa. All solubilized products were examined by SDS-polyacrylamide gel electrophoresis, and a range of high- and low-molecular-weight polypeptides was identified. None were glycoproteins. Hoops, which comprise the sheath's structure, were seen by electron microscopy after all of the attempted dissolutions. Monoclonal antibodies were produced against the 10- to 40-kDa range of solubilized products and against the approximately 40-kDa polypeptides, and polyclonal antiserum was produced against an 18-kDa polypeptide. These immunological markers were used in Western immunoblotting and protein A-colloidal gold-antibody probing by electron microscopy to identify the structural location of the various polypeptides. Native sheath, which possesses 2.8-nm particles on its outer surface (M. Stewart, T.J. Beveridge, and G.D. Sprott, J. Mol. Biol. 183:509-515, 1985; P.J. Shaw, G.J. Hills, J.A. Henwood, J.E. Harris, and D.B. Archer, J. Bacteriol. 161:750-757, 1985), presented a gentle wave-form surface in platinum-shadowed specimens. In contrast, the inner face of the sheath was highlighted by ridges lying perpendicular to the longitudinal axis of the sheath and likely corresponded to hoop boundaries. Both the polyclonal and monoclonal antibodies were specific for different faces; polyclonal antibodies labeled the inner face, whereas monoclonal antibodies labeled the outer face. Accordingly, the apparent asymmetry of structure between the two faces of the sheath can be correlated by our immunochemical probing with a distinct asymmetry in the distribution of exposed polypeptides between the faces. The possible implications of this asymmetry for growth and maturation of the sheath are explained.     

Isolation and characterization of a FAD-dependent NADH diaphorase from Methanospirillum hungatei strain GP1

Crude extracts of Methanospirillum hungatei strain GP1 contained NADH and NADPH diaphorase activities. After a 483-fold purification of the NADH diaphorase the enzyme was further separated from contaminating proteins by polyacrylamide disc gel electrophoresis. Two distinct activity bands were extracted from the acrylamide, each one having oxygen, 2,6-dichlorophenolindophenol, and cytochrome c linked activities. In these preparations NADPH could not replace NADH as electron donor. During the initial purification steps all activity was lost due to the removal of a readily released cofactor. Enzyme activity was restored by either FAD or a FAD fraction isolated from M. hungatei. Oxidase activity exhibited a broad pH optimum from 7.0 to 8.5 and apparent Km values of 26 microM for NADH and 0.2 microM for FAD. Superoxide anion, formed in the presence of oxygen, accounted for all of the NADH consumed in the reaction. The molecular weight of the diaphorase was about 117 500 by sodium dodecyl sulfate gel electrophoresis. Sulfhydryl reagents and chelating agents were inhibitory. Inactivation, which occurred during storage in phosphate buffer at 4 degrees C, was delayed by dithiothreitol. The isolated NADH diaphorase lacked NADPH:NAD transhydrogenase and NAD reductase activities.     

Antigenic determinants distinctive of Methanospirillum hungatei and Methanogenium cariaci identified by monoclonal antibodies

Monoclonal antibodies were prepared against two species of Methanomicrobiaceae. Antibody 1A is specific for Methanospirillum hungatei strain JF1 and the determinant it recognizes is expressed on the surface of JF1 cells, where it is exposed and accessible to antibody. The determinant is found in a polypeptide (MW<12,000) in the sheath that covers the bacterial cell; it is not present in Methanospirillum hungatei strain GP1; and it is not expressed on the surface of whole cells of the other 24 methanogenic bacteria tested. It is therefore a marker of strain JF1, consequently, antibody 1A is potentially useful for tracking JF1 and fragments thereof in a variety of samples. Antibody 7A is specific for Methanogenium cariaci JR1c. It did not react with any other methanogen tested, not even with Mg. marisnigri or Ms. hungatei JF1, although these cross-react with Mg. cariaci if tested with polyclonal antisera. Therefore antibody 7A recognizes specifically a marker of Mg. cariaci JR1c.Abbreviations SIA slide immunoenzymatic assay - SDS-PAGE sodium dodecylsulfate polyacrylamide gel electrophoresis     

Characterization of the cell wall of the sheathed methanogen Methanospirillum hungatei GP1 as an S layer.

The cell wall of Methanospirillum hungatei GP1 is a labile structure that has been difficult to isolate and characterize because the cells which it encases are contained within a sheath. Cell-sized fragments, 560 nm wide by several micrometers long, of cell wall were extracted by a novel method involving the gradual drying of the filaments in 2% (wt/vol) sodium dodecyl sulfate and 10% (wt/vol) sucrose in 50 mM N-2-hydroxyethylpiperazine-N'-2-ethanesulfonic acid (HEPES) buffer containing 10 mM EDTA. The surface was a hexagonal array (a = b = 15.1 nm) possessing a helical superstructure with a ca. 2.5 degrees pitch angle. In shadowed relief, the smooth outer face was punctuated with deep pits, whereas the inner face was relatively featureless. Computer-based two-dimensional reconstructed views of the negatively stained layer demonstrated 4.0- and 2.0-nm-wide electron-dense regions on opposite sides of the layer likely corresponding to the openings of funnel-shaped channels. The face featuring the larger openings best corresponds to the outer face of the layer. The smaller opening was encircled by a stalk-like mass from which 2.2-nm-wide protrusions were resolved. The cell wall in situ was degraded at pH 9.6 at 56 degrees C but was unaffected at pH 7.4 at the same temperature. The cell wall was composed of two nonglycosylated polypeptides (114 and 110 kDa). The cell wall resembled an archaeal S layer and may function in regulating the passage of small (< 10-kDa) sheath precursor proteins.     

Heavy metal uptake by plankton and other seston particles

Abstract

The distribution of heavy metals Cd, Cu and Pb between the dissolved phase and the suspended matter has been studied in a stagnant fresh-water lake Zoommeer with the aim of finding a link between heavy metals and seston particles. Phytoplankton and Zooplankton were identified to species level and their density was determined. The average surface area and average volume, respectively, of each plankton species was calculated from the measured dimensions of 20–200 specimens of each species. Heavy metal concentrations in the dissolved phase and the particulate matter were determined by differential pulse anodic stripping voltammetry.

The seston particles were divided into 10 subdivisions and the total surface area and volume, respectively, of each subdivision was taken as an independent variable for the subsequent multiple regression analysis to find the possible correlations with the heavy metal concentrations. The obtained models can explain a very large part (up to 98% for Pb, 99% for Cd and 87% for Cu) of the variation in heavy metal concentration. An adsorption process appears to govern Cd and Pb uptake by Chlorophyceae and Dinophyceae. In addition, both Cd and Pb can penetrate into Chlorophyceae. In the case of Cu, a specific interaction with the Cyanophyceae has been found. In general, the uptake of heavy metals is highly specific for both the respective metal and the organism.     

Characterization of novel, phenol-soluble polypeptides which confer rigidity to the sheath of Methanospirillum hungatei GP1.

Treatment of the Methanospirillum hungatei GP1 sheath with 90% (wt/vol) phenol resulted in the solubilization of a novel phenol-soluble group of polypeptides. These polypeptides were purified by the removal of insoluble material by ultracentrifugation and represented approximately 19% of the mass of the sheath. The phenol-insoluble material resembled untreated sheath but had lost its rigidity and cylindrical form. Recombination of phenol-soluble and phenol-insoluble fractions by dialysis to remove phenol resulted in cylindrical reassembly products. Although bona fide sheath (complete with the 2.8-nm lattice) was not produced, a role for the phenol-soluble polypeptides in the maintenance of sheath rigidity is implied. The phenol-soluble polypeptides have limited surface exposure as detected by antibodies on intact sheath; therefore, they are not responsible for the 2.8-nm repeat occurring on the outer face of the sheath. However, longitudinal and transverse linear labeling by protein A-colloidal gold on the outer and inner faces, respectively, occurred with monoclonal antibodies specific to the phenol-soluble polypeptides. Restricted surface exposure of phenol-soluble polypeptides on the sheath highlighted molecular defects in sheath architecture. These lattice faults may indicate sites of sheath growth to accommodate cell growth or division (longitudinal immunogold label) and filament division (transverse immunogold label). The identification of a second group of polypeptides within the infrastructure of the sheath suggests that the sheath is a trilaminar structure in which phenol-soluble polypeptides are sandwiched between sodium dodecyl sulfate-beta-mercaptoethanol-EDTA-soluble polypeptides (G. Southam and T. J. Beveridge, J. Bacteriol. 173:6213-6222, 1991) (phenol-insoluble material).     

Detection of growth sites in and protomer pools for the sheath of Methanospirillum hungatei GP1 by use of constituent organosulfur and immunogold labeling.

Methanospirillum hungatei GP1 integrated approximately 9% of cellular [35S]cysteine into its sheath. Autoradiography of sodium dodecyl sulfate-polyacrylamide gels revealed that [35S]cysteine was confined to the proteins released by the sodium dodecyl sulfate-beta-mercaptoethanol-EDTA solubilization method (G. Southam and T. J. Beveridge, J. Bacteriol. 173:6213-6222, 1991) and was not present in the proteins released by treatment with phenol (G. Southam and T. J. Beveridge, J. Bacteriol. 174:935-946, 1992). Limited labeling of exposed sulfhydryl groups on hoops produced from sheath material suggested that most organosulfur groups occur within hoops and therefore help contribute to resilience. Electron microscopic autoradiography demonstrated that sheath growth, which is most active at the sites of cell division (spacer region), occurs through the de novo development of hoops. For growth to occur in the spacer region, sheath precursors must transverse several periodic envelope layers, including the cell wall (a single layer) and the various lamellae of the spacer plug (T. J. Beveridge, G. D. Sprott, and P. Whippey, J. Bacteriol. 173:130-140, 1991).     

pH值和产甲烷抑制剂对两相耦合系统污泥发酵定向产乙酸的影响

采用产氢产乙酸/同型产乙酸两相耦合工艺对剩余污泥进行了半连续式厌氧发酵,主要研究了pH值和产甲烷抑制剂2-bromoethanesulphonate(BES)对耦合系统定向产乙酸的影响.结果表明:碱性pH(pH=10.0)和添加BES都能促进A相乙酸的积累,提高乙酸的产率,同时碱性pH比添加BES更有利于污泥的水解.当...     

Biomethanation of spent wash: Heavy metal inhibition of methanogenesis in synthetic medium

Five heavy metals detected in distillery waste were lead (1.0–8.8 μg/ml), copper (1.7–15.7 μg/ml), zinc (3.1–11.8 μg/ml), iron (36.0–43.5 μg/ml), and manganese (3.0–5.1 μg/ml). Their toxicity to biomethanogenesis in a synthetic medium containing 1% sodium acetate, propionate, or butyrate was measured by batch fermentation, after cultivating the bacterial biomass semicontinuously. Lead, copper, and zinc in decreasing order were found to be toxic to biomethanogenesis. Lead at the concentration of 10 μg/ml completely stopped methane production. Iron did not produce any notable change in the process while manganese stimulated the rate of methane production. The toxicity of lead, copper, and zinc to methanogenic bacteria and methane production was dose-dependent but the growth of acetogenic bacteria was impaired at higher concentrations (2.5–10.0 μg/ml) of lead, copper, and zinc. Manganese stimulated the growth of only methanogenic bacteria, but not that of non-methanogenic bacteria or acetic acid production. The reduction in the synthesis of acetic acid via butyrate was more in the presence of these three metals than the synthesis of this acid via propionate.     

Heavy Metal Ions Inhibition of Jack Bean Urease: Potential for Rapid Contaminant Probing

The kinetics of heavy metal ions inhibition of jack bean urease was studied by progress curve analysis in a reaction system without enzyme-inhibitor preincubation. The inhibition was found to be biphasic with an initial, small inhibitory phase changing over the time course of 5–10?min into a final linear steady state with a lower velocity. This time-dependent pattern was best described by mechanism B of slow-binding inhibition, involving the rapid formation of an EI complex that subsequently undergoes slow conversion to a more stable EI* complex. The kinetic parameters of the process, the inhibition constants Ki and K_i^* and the forward k5 and reverse k6 rate constants for the conversion, were evaluated from the reaction progress curves by nonlinear regression treatment. Based on the values of the overall inhibition constant K_i^*, the heavy metal ions were found to inhibit urease in the following decreasing order: Hg2+ >?Cu2+ >?Zn2+ >?Cd2+ >?Ni2+ >?Pb2+ >?Co2+ >?Fe3+ >?As3+. With the K_i^* values as low as 1.9?nM for Hg2+ and 7.1?nM for Cu2+, 100–1000 times lower than those of the other ions, urease may be utilized as a bioindicator of the trace levels of these ions in environmental monitoring, bioprocess control or pharmaceutical analysis.     

Pathway of propionate oxidation by a syntrophic culture of Smithella propionica and Methanospirillum hungatei

The pathway of propionate conversion in a syntrophic coculture of Smithella propionica and Methanospirillum hungatei JF1 was investigated by (13)C-NMR spectroscopy. Cocultures produced acetate and butyrate from propionate. [3-(13)C]propionate was converted to [2-(13)C]acetate, with no [1-(13)C]acetate formed. Butyrate from [3-(13)C]propionate was labeled at the C2 and C4 positions in a ratio of about 1:1.5. Double-labeled propionate (2,3-(13)C) yielded not only double-labeled acetate but also single-labeled acetate at the C1 or C2 position. Most butyrate formed from [2,3-(13)C]propionate was also double labeled in either the C1 and C2 atoms or the C3 and C4 atoms in a ratio of about 1:1.5. Smaller amounts of single-labeled butyrate and other combinations were also produced. 1-(13)C-labeled propionate yielded both [1-(13)C]acetate and [2-(13)C]acetate. When (13)C-labeled bicarbonate was present, label was not incorporated into acetate, propionate, or butyrate. In each of the incubations described above, (13)C was never recovered in bicarbonate or methane. These results indicate that S. propionica does not degrade propionate via the methyl-malonyl-coenzyme A (CoA) pathway or any other of the known pathways, such as the acryloyl-CoA pathway or the reductive carboxylation pathway. Our results strongly suggest that propionate is dismutated to acetate and butyrate via a six-carbon intermediate.     

Transmission electron microscopy, scanning tunneling microscopy, and atomic force microscopy of the cell envelope layers of the archaeobacterium Methanospirillum hungatei GP1.

Methanospirillum hungatei GP1 possesses paracrystalline cell envelope components including end plugs and a sheath formed from stacked hoops. Both negative-stain transmission electron microscopy (TEM) and scanning tunneling microscopy (STM) distinguished the 2.8-nm repeat on the outer surface of the sheath, while negative-stain TEM alone demonstrated this repeat around the outer circumference of individual hoops. Thin sections revealed a wave-like outer sheath surface, while STM showed the presence of deep grooves that precisely defined the hoop-to-hoop boundaries at the waveform nodes. Atomic force microscopy of sheath tubes containing entrapped end plugs emphasized the end plug structure, suggesting that the sheath was malleable enough to collapse over the end plugs and deform to mimic the shape of the underlying structure. High-resolution atomic force microscopy has revised the former idea of end plug structure so that we believe each plug consists of at least four discs, each of which is approximately 3.5 nm thick. PT shadow TEM and STM both demonstrated the 14-nm hexagonal, particulate surface of an end plug, and STM showed the constituent particles to be lobed structures with numerous smaller projections, presumably corresponding to the molecular folding of the particle.     

Pathway of Propionate Oxidation by a Syntrophic Culture of Smithella propionica and Methanospirillum hungatei

The pathway of propionate conversion in a syntrophic coculture of Smithella propionica and Methanospirillum hungatei JF1 was investigated by ¹³C-NMR spectroscopy. Cocultures produced acetate and butyrate from propionate. [3-¹³C]propionate was converted to [2-¹³C]acetate, with no [1-¹³C]acetate formed. Butyrate from [3-¹³C]propionate was labeled at the C2 and C4 positions in a ratio of about 1:1.5. Double-labeled propionate (2,3-¹³C) yielded not only double-labeled acetate but also single-labeled acetate at the C1 or C2 position. Most butyrate formed from [2,3-¹³C]propionate was also double labeled in either the C1 and C2 atoms or the C3 and C4 atoms in a ratio of about 1:1.5. Smaller amounts of single-labeled butyrate and other combinations were also produced. 1-¹³C-labeled propionate yielded both [1-¹³C]acetate and [2-¹³C]acetate. When ¹³C-labeled bicarbonate was present, label was not incorporated into acetate, propionate, or butyrate. In each of the incubations described above, ¹³C was never recovered in bicarbonate or methane. These results indicate that S. propionica does not degrade propionate via the methyl-malonyl-coenzyme A (CoA) pathway or any other of the known pathways, such as the acryloyl-CoA pathway or the reductive carboxylation pathway. Our results strongly suggest that propionate is dismutated to acetate and butyrate via a six-carbon intermediate.     

Evaluation and elimination of inhibitory effects of salts and heavy metal ions on biodegradation of Congo red by Pseudomonas sp. mutant

In this study, it was attempted to evaluate the influences and also recommended some elimination methods for inhibitory effects offered by salts and heavy metal ions. Congo red dye solution treated with mutant Pseudomonas sp. was taken as a model system for study. The salts used in this study are NaCl, CaCl₂ and MgSO₄·7H₂O. Though the growth was inhibited at concentrations above 4 g/l, toleration was achieved by acclimatization process. In case of heavy metal ions, Cr (VI) showed low inhibition up to 500 mg/l of concentration, compared to Zn (II) and Cu (II). It was due to the presence of chromium reductase enzyme which was confirmed by SDS-PAGE. Zn (II) and Cu (II) ion inhibitions were eliminated by chelation with EDTA. The critical ion concentrations obtained as per Han-Levenspiel model for Cr (VI), Zn (II) and Cu (II) were 0.8958, 0.3028 and 0.204 g/l respectively.     

霉菌吸附重金属离子的研究进展

介绍了目前国内外采用霉菌吸附分离废水中重金属离子的研究情况,总结了不同霉菌的吸附能力,讨论了霉菌吸附重金属离子的影响因素、机理以及固定化技术,最后展望了霉菌吸附重金属的发展趋势.     

水生生物对重金属吸收和积累研究进展

综述了国内外在水生生物对重金属吸收和积累研究方面的最新进展。着重阐述了重金属毒性影响因素和鱼类对重金属吸收和积累机理方面的研究现状和趋势。     

Composition of Methanospirillum hungatii GP1 during growth on different media

Growth of Methanospirillum hungatii GP1 as determined by optical density measurement wsa comparable to growth assessed by cell dry weight, ribonucleic acid content, and deoxyribonucleic acid content. Cultivation of M. hungatii on synthetic medium containing mineral salts, vitamins, and acetic acid indicated that, on a dry weight basis, cell constituents such as protein (71%), ribonucleic acid (15.8%), deoxyribonucleic acid (1.6%), and total carbohydrate (3.2%) did not vary significantly with the growth phase. Cells grown in the synthetic medium supplemented with yeast extract and tryptone had slightly higher protein content (76%), but the concentrations of the other cell constituents were similar and did not fluctuate much during growth. Nitrogen limiting growth resulted in somewhat lower ribonucleic acid content as well as slightly higher protein content than that in cells grown in nonlimiting medium. Methanospirillum hungatii did not accumulate any of the commonly known reserve materials under nitrogen or carbon and hydrogen limiting growth.     

Heavy metal ions are potent inhibitors of protein folding

Environmental and occupational exposure to heavy metals such as cadmium, mercury and lead results in severe health hazards including prenatal and developmental defects. The deleterious effects of heavy metal ions have hitherto been attributed to their interactions with specific, particularly susceptible native proteins. Here, we report an as yet undescribed mode of heavy metal toxicity. Cd²⁺, Hg²⁺ and Pb²⁺ proved to inhibit very efficiently the spontaneous refolding of chemically denatured proteins by forming high-affinity multidentate complexes with thiol and other functional groups (IC₅₀ in the nanomolar range). With similar efficacy, the heavy metal ions inhibited the chaperone-assisted refolding of chemically denatured and heat-denatured proteins. Thus, the toxic effects of heavy metal ions may result as well from their interaction with the more readily accessible functional groups of proteins in nascent and other non-native form. The toxic scope of heavy metals seems to be substantially larger than assumed so far.     

High-resolution topography of the S-layer sheath of the archaebacterium Methanospirillum hungatei provided by scanning tunneling microscopy.

The inner and outer surfaces of the sheath of Methanospirillum hungatei GP1 have been imaged for the first time by using a bimorph scanning tunneling microscope (STM) on platinum-coated or uncoated specimens to a nominal resolution in height of ca. 0.4. nm. Unlike more usual types of microscopy (e.g., transmission electron microscopy), STM provided high-resolution topography of the surfaces, giving good depth detail which confirmed the sheath to be a paracrystalline structure possessing minute pores and therefore impervious to solutes possessing a hydrated radius of greater than 0.3 nm. STM also confirmed that the sheath consisted of a series of stacked hoops approximately 2.5 nm wide which were the remnants of the sheath after treatment with 2% (wt/vol) sodium dodecyl sulfate-2% (vol/vol) beta-mercaptoethanol (pH 9.0). No topographical infrastructure could be seen on the sides of the hoops. This research required the development of a new long-range STM capable of detecting small particles such as bacteria on graphite surfaces as well as a new "hopping" STM mode which did not deform the poorly conducting bacterial surface during high-resolution topographical analysis.     

植物修复——治理土壤重金属污染的新途径

介绍了重金属污染土壤的植物修复的概念、原理与研究动态以及重金属超积累植物的特性 ,及其在治理污染土壤中的潜力 ,为土壤重金属污染的整治及其生态的修复提出新途径。