Biosorption of uranium by Myxococcus xanthus

This paper deals with uranium biosorption by Myxococcus xanthus biomass in which dry biomass, accumulating up to 2.4 mM of uranium g⁻¹, is demonstrated to be a more efficient biosorbent than wet biomass. For uranium concentrations of 0.1–0.3 mM, between 95.79% and 95.99% of the uranium was taken up from the solution. Dry biomass biosorption was found to be relatively rapid, reaching equilibrium after 5–10 min. In addition, the pH influenced biosorption, pH 4.5 promoting maximum uptake. It was also established that the biosorbed uranium is located on the cellular wall and within the extracellular mucopolysaccharide of this microorganism. Furthermore, using sodium carbonate as a desorbent agent, 80.82% of the biosorbed uranium could be recovered. The results obtained indicate the possible utilization of M. xanthus biomass to solve some problems of the water contaminated by uranium.     

Studies on the biosorption of uranium by Talaromyces emersonii CBS 814.70 biomass

Residual biomass, produced by the thermophilic fungus, Talaromyces emersonii CBS 814.70, following growth on glucose-containing media, was examined for its ability to take up uranium from aqueous solution. It was found that the biomass had a relatively high observed biosorption capacity for the uranium (280 mg/g dry weight biomass). The calculated maximum biosorption capacity obtained by fitting the data to a Langmuir model was calculated to be 323 mg uranium/g dry weight biomass. Pretreatment of the biomass with either dilute HCl or NaOH brought about a significant decrease in biosorptive capacity for uranium. Studies on the effects of variation in temperature on the biosorptive capacity demonstrated no significant change in binding between 20°C and 60°C. However, a significant decrease in biosorptive capacity was observed at 5°C. Binding of uranium to the biomass at all temperatures reached equilibrium within 2 min. While the routine binding assays were performed at pH 5.0, adjustment of the pH to 3.0 gave rise to a significant decrease in biosorption capacity by the biomass. The biosorptive capacity of the biomass for uranium was increased when extraction from solution in sea-water was examined.     

Biosorption of uranium and thorium

Selected samples of waste microbial biomass originating from various industrial fermentation processes and biological treatment plants have been screened for biosorbent properties in conjunction with uranium and thorium in aqueous solutions. Biosorption isotherms have been used for the evaluation of biosorptive uptake capacity of the biomass which was also compared to an activated carbon and the ion exchange resin currently used in uranium production processes. Determined uranium and thorium biosorption isotherms were independent of the initial U or Th solution concentration. Solution pH affected the exhibited uptake. In general, lower biosorptive uptake was exhibited at pH 2 than at pH 4. No discernible difference in uptake was observed between pH 4 and pH 5 where the optimum pH for biosorption lies. The biomass of Rhizopus arrhizus at pH 4 exhibited the highest uranium and thorium biosorptive uptake capacity (g) in excess of 180 mg/g. At an equilibrium uranium concentration of 30 mg/liter, R. arrhizus removed approximately 2.5 and 3.3 times more uranium than the ion exchange resin and activated carbon, respectively. Under the same conditions, R. arrhizus removed 20 times more thorium than the ion exchange resin and 2.3 times more than the activated carbon. R. arrhizus also exhibited higher uptake and a generally more favorable isotherm for both uranium and thorium than all other biomass types examined.     

Isolation and analyses of uranium tolerant <Emphasis Type="Italic">Serratia marcescens</Emphasis> strains and their utilization for aerobic uranium U(VI) bioadsorption

Enrichment-based methods targeted at uranium-tolerant populations among the culturable, aerobic, chemo-heterotrophic bacteria from the subsurface soils of Domiasiat (India’s largest sandstone-type uranium deposits, containing an average ore grade of 0.1 % U₃O₈), indicated a wide occurrence of Serratia marcescens. Five representative S. marcescens isolates were characterized by a polyphasic taxonomic approach. The phylogenetic analyses of 16S rRNA gene sequences showed their relatedness to S. marcescens ATCC 13880 (≥99.4% similarity). Biochemical characteristics and random amplified polymorphic DNA profiles revealed significant differences among the representative isolates and the type strain as well. The minimum inhibitory concentration for uranium U(VI) exhibited by these natural isolates was found to range from 3.5–4.0 mM. On evaluation for their uranyl adsorption properties, it was found that all these isolates were able to remove nearly 90–92% (21–22 mg/L) and 60–70% (285–335 mg/L) of U(VI) on being challenged with 100 μM (23.8 mg/L) and 2 mM (476 mg/L) uranyl nitrate solutions, respectively, at pH 3.5 within 10 min of exposure. his capacity was retained by the isolates even after 24 h of incubation. Viability tests confirmed the tolerance of these isolates to toxic concentrations of soluble uranium U(VI) at pH 3.5. This is among the first studies to report uranium-tolerant aerobic chemoheterotrophs obtained from the pristine uranium ore-bearing site of Domiasiat.     

Biosorption of Copper(II) by Live and Dried Biomass of the White Rot Fungi Phanerochaete chrysosporium and Funalia trogii

Biosorption is an innovative and alternative technology to remove heavy metal pollutants from aqueous solution using live, inactive and dead biomasses such as algae, bacteria and fungi. In this study, live and dried biomass of Phanerochaete chrysosporium and Funalia trogii was applied as heavy metal adsorbent material. Biosorption of copper(II) cations in aqueous solution by live and dried biomass of Phanerochaete chrysosporium and Funalia trogii was investigated to study the effects of initial heavy metal concentration, pH, temperature, contact time, agitation rate and amount of fungus. Copper(II) was taken up quickly by fungal biomass (live or dried) during the first 15 min and the most important factor which affected the copper adsorption by live and dried biomass was the pH value. An initial pH of around 5.0 allowed for an optimum adsorption performance. Live biomass of two white rot fungi showed a high copper adsorption capacity compared with dried biomass. Copper(II) uptake was found to be independent of temperature in the range of 20–45 °C. The initial metal ion concentration (10–300 mg/L) significantly influenced the biosorption capacity of these fungi. The results indicate that a biosorption as high as 40–60 % by live and dried biomass can be obtained under optimum conditions.     

Nonreductive Biomineralization of Uranium(VI) Phosphate Via Microbial Phosphatase Activity in Anaerobic Conditions

The remediation of uranium from soils and groundwater at Department of Energy (DOE) sites across the United States represents a major environmental issue, and bioremediation has exhibited great potential as a strategy to immobilize U in the subsurface. The bioreduction of U(VI) to insoluble U(IV) uraninite has been proposed to be an effective bioremediation process in anaerobic conditions. However, high concentrations of nitrate and low pH found in some contaminated areas have been shown to limit the efficiency of microbial reduction of uranium. In the present study, nonreductive uranium biomineralization promoted by microbial phosphatase activity was investigated in anaerobic conditions in the presence of high nitrate and low pH as an alternative approach to the bioreduction of U(VI). A facultative anaerobe, Rahnella sp. Y9602, isolated from soils at DOE's Oak Ridge Field Research Center (ORFRC), was able to respire anaerobically on nitrate as a terminal electron acceptor in the presence of glycerol-3-phosphate (G3P) as the sole carbon and phosphorus source and hydrolyzed sufficient phosphate to precipitate 95% total uranium after 120 hours in synthetic groundwater at pH 5.5. Synchrotron X-ray diffraction and X-ray absorption spectroscopy identified the mineral formed as chernikovite, a U(VI) autunite-type mineral. The results of this study suggest that in contaminated subsurfaces, such as at the ORFRC, where high concentrations of nitrate and low pH may limit uranium bioreduction, the biomineralization of U(VI) phosphate minerals may be a more attractive approach for in situ remediation providing that a source of organophosphate is supplied for bioremediation.     

Effect of environmental factors and precursors on oxalic acid production,mycelial biomass and virulence of a potential bioherbicide isolate of Sclerotium rolfsii SC64 produced in liquid culture

The fungus Sclerotium rolfsii is presently under development as a bioherbicide for broadleaf weed species using fungus-infested substrates as application material in this laboratory. The effect of environmental factors and three precursors (citric acid, ascorbic acid, and sodium succinate) on mycelial growth, oxalic acid production, and virulence by SC64 in liquid culture were investigated. The results showed that for mycelia growth the optimum liquid medium was Modified Richard's solution (MRS) among the five tested media, but potato dextrose broth (PDB) produced the maximum oxalic acid production and virulence on detached Solidago canadensis leaves. When PDB was used as the basic medium, the oxalic acid/mycelial dry weight (mg g^–1) ratio reached the peak 4 days after inoculation. The optimum temperature for oxalic acid production was at 27°C, but increased mycelial dry weight and virulence were observed at 30°C. The optimum range of initial pH value for oxalic acid accumulation was 4.0–6.0, with the optimal pH 5.0; highest mycelial growth was with an initial pH 3.5–6.0 (optimum pH 5.0) and subsequently pH 3.5–5.5 (maximum at pH 3.5). Both mycelial dry weight and oxalic acid production showed a decreasing trend as a result of the precursor of oxalic acid being added to PDB. Among the three precursors, the greatest decrease in mycelial dry weight, and oxalic acid production was caused by sodium succinate. This clarification of optimal conditions for production of mycelial biomass while insuring high concentrations of oxalic acid and high virulence should be useful for further development of this fungus as biocontrol agent.     

Flotation as a bioseparation process for fungi removal

Summary Collectorless flotation has been investigated at a laboratory scale, as a separation technique applied effectively to biomass fine particles (dead free) of Penicillium and Rhizopus; these were previously used for cadmium (a priority toxic pollutant) biosorption from dilute aqueous solutions. The basic parameters of dispersea-air flotation were studied, i.e. solution pH, flotation time, ethanol addition (used as a convenient frother), Cd and biomass concentration.     

Biosorption of sterols from tobacco waste extract using living and dead of newly isolated fungus Aspergillus fumigatus strain LSD-1

ABSTRACT

Sterols are verified to be able to produce polycyclic aromatic hydrocarbons during its pyrolysis. In this study, a kind of Aspergillus fumigatus (LSD-1) was isolated from cigar leaves, and the biosorption effects on the stigmasterol, β-sitosterol, campesterol, cholesterol, and ergosterol by using living and dead biomass of LSD-1 were investigated. The results showed that both living and dead biomass could efficiently remove these sterols in aqueous solution and tobacco waste extract (TWE). Interestingly, compared with the living biomass of LSD-1, the dead biomass of LSD-1 not only kept a high adsorption efficiency but also did not produce ergosterol. Overall, dead biomass of LSD-1 was a more suitable biosorbent to sterols in TWE. Furthermore, Brunner-Emmet-Teller (BET), Fourier transformed infrared spectrometer (FTIR) and scanning electron microscope (SEM) analysis were used to explore the biosorption process of living and dead biomass and their differences, suggesting that the biosorption of sterols was a physical process.     

Biosorbents for recovery of metals from industrial solutions

Summary Biosorbent materials are a potential alternative to conventional processes of metal recovery from industrial solutions. Algal biomass ofSargassum natans andAscophyllum nodosum outperformed ion exchange resins in sequestering respectively gold and cobalt from solutions. Non-living biomass ofSaccharomyces cerevisiae andRhizopus arrhizus exhibited higher metal-uptake capacity than the living biomass for the uptake of copper, zinc, cadmium, uranium. The solution pH affected the metal-uptake capacity of the biomass whereas the equilibrium biosorption isotherms were independent of the initial concentration of the metal in the solution. Desorption of the metal from the biosorbent and recycle of the biosorbent have also been demonstrated.     

Effect of culture conditions on antifouling compound production of a sponge-associated fungus

Microorganisms associated with invertebrate hosts have long been suggested to be a source for bioactive metabolites. In this study, we reported that a sponge-associated fungus, Letendraea helminthicola, produced two antifouling compounds: 3-methyl-N-(2-phenylethyl) butanamide and cyclo(D-Pro-D-Phe). To optimize the production of these antifouling compounds, we then examined the production of compounds under different culture conditions (temperature, salinity, pH, and carbon and nitrogen sources). This fungus grew well and produced more compounds at temperatures between 18 and 30°C; the fungus grew well at 75 parts per thousand (ppt) salinity but produced the highest amount of antifouling compounds at 30 and 45 ppt. The optimal initial pH value for mycelial growth was 5.5 to 6.5, whereas the production of the antifouling compounds was maximized at pH 3.5 and 4.5. Glucose and xylose (as carbon sources) increased the production of antifouling compounds. Yeast extract and peptone (as nitrogen sources) maximized the production of mycelial biomass and antifouling compounds. Our results indicate that culture conditions greatly affect the production of bioactive compounds from mycelial fungal cultures as exemplified by strain L. helminthicola and that the conditions favorable for fungal growth may not be the best conditions for bioactive compound production.     

Production of cellulases by Thermomucor indicae-seudaticae: characterization of a thermophilic β-glucosidase

Abstract

The current study evaluated the production and characterization of β-glucosidase by the thermophilic fungus Thermomucor indicae-seudaticae in solid-state fermentation of wheat bran. Isolated fungi have significant amounts of β-glucosidase, an enzyme that may be applied to different industrial processes, such as the production of fuels, food, and other chemical compounds. Maximal enzyme activity occurred in pH 3.5–4.5 and at 70?°C. The enzyme exhibited high thermostability, for 1?h, up to 60?°C, and good tolerance to glucose (10?mM) and ethanol (10%). The optimization of fermentative parameters on the production of β-glucosidase was carried out by evaluating the best supplementary nutrient source, pH of nutrient solution, initial substrate moisture and fermentation temperature. The optimization of the above fermentation parameters increased enzyme activity by 120.0%. The highest enzymatic activity (164.0?U/g) occurred with wheat bran containing 70% initial moisture, supplemented with 1.0% (NH₄)₂SO₄ solution at pH 5.5–6.0 and fungus incubated at 40?°C. A more detailed study of β-glucosidase suggested that Sulfur is an important component of the main amino acid present in this enzyme. The enhancer of the enzyme activity occurred when the fungus was grown on wheat bran supplemented with a sulfur-containing solution. In fact, increasing the concentration of sulfur in the solution increased its activity.     

Phosphate uptake and polyphosphate metabolism of mycorrhizal and nonmycorrhizal roots of pine and of Suillus bovinus at varying external pH measured by in vivo 31P-NMR

 Comparative in vivo ³¹P-NMR analyses of mycorrhizal and nonmycorrhizal roots of Pinus sylvestris and the fungus of Suillus bovinus in pure culture were used to investigate alterations in phosphate metabolism due to changes in external pH in the range 3.5–8.5. All control samples maintained a constant pH in both cytoplasm and vacuole. Mycorrhizal roots and pure fungus, but not nonmycorrhizal roots, transformed accumulated inorganic phosphate into mobile polyphosphate with a medium chain length. Phosphate uptake rates and polyphosphate accumulation responded differently to external pH. In all cases, maximal phosphate uptake occurred at an external pH close to 5.5. At an external pH of 8.5, both roots and fungus showed a distinct lag in phosphate uptake, which was abolished when the external pH was lowered to 7.5. An irreversible effect on phosphate uptake as a consequence of variation in external pH was also observed. The central role of the fungus in regulating mycorrhizal phosphate metabolism is discussed. Accepted: 15 April 1997     

Effects of carbon and nitrogen sources,carbon-to-nitrogen ratio,and initial pH on the growth of nematophagous fungus <Emphasis Type="Italic">Pochonia chlamydosporia</Emphasis> in liquid culture

The effects of carbon and nitrogen sources, carbon-to-nitrogen ratio (C:N) and initial pH value on the growth and sporulation of the nematophagous fungus Pochonia chlamydosporia in liquid culture were examined. Among the 21 carbon sources and 15 nitrogen compounds tested, the optimal carbon and nitrogen sources for mycelial growth were sweet potato and L-tyrosine, and for sporulation were sweet potato and casein peptone. A C:N ratio of 10:1 at pH 3.7 gave the maximum yield of conidia and a C:N ratio of 40:1 at pH 6.8 gave the maximum biomass. The initial pH value had a significant effect on mycelial growth and conidial production, with the optimal ranges being 3.5–4.5 for sporulation and 5–6 for growth. Maximum conidial production was obtained at an initial pH of 4.0 and the maximum biomass at pH 6.0. The results also showed that the final pH after 7 days cultivation was always higher than the initial value. The variability in growth and sporulation of seven strains of P. chlamydosporia in liquid culture was also compared and discussed.     

Production of ethanol and biomass from thin stillage by Neurospora intermedia: A pilot study for process diversification

Dry mill ethanol processes produce ethanol and animal feed from whole grains, where the wastewater after the distillation and separation of solid materials is called “thin stillage.” In this work, similar production of ethanol (3.5 g/L) and biomass (5 g/L) from thin stillage was obtained during batch cultivation of the edible fungus Neurospora intermedia in a 2‐m high airlift reactor and bubble column. The fungal biomass, containing 50% w/w protein and 12% w/w lipids, was rich in essential amino acids and omega‐3 and ‐6 fatty acids. In a continuous mode of fermentation, dilution rates of up to 0.2 h^?1 could be applied without cell washout in the bubble column at 0.5 vvm. At 0.1 h^?1, around 5 g/L of ethanol and 4 g/L of biomass containing ca. 50% w/w protein were produced. The fungus was able to assimilate saccharides in the liquid fraction as well as sugar backbones such as xylan and arabinan in the solid fraction. The inclusion of the current process could potentially lead to the production of 11 000 m³ of ethanol (5.5% improvement vs. normal industrial process) and around 6300 tons of high‐quality biomass for animal feed at a typical facility producing 200 000 m³ ethanol per year.     

Feasibility of using <Emphasis Type="Italic">Trichoderma harzianum</Emphasis> biomass for the removal of erioglaucine from aqueous solution

The test fungus Trichoderma harzianum was isolated from the Western Ghats area of Tamilnadu, India. The study involves the feasibility of using T.harzianum to remove erioglaucine from an aqueous solution in batch mode. The batch mode experimental parameters such as effect of agitation time and initial dye concentration, adsorbent mass and pH were determined. The results revealed that, the fungal biomass at 1.5 g/50 ml adsorbent mass removed 75.67–88.05% of dye (10–50 mg/l) in 105 min at pH 4.0. The adsorption equilibrium data followed both Langmuir and Freundlich isotherms. From the Langmuir isotherm, the adsorbent had adsorption capacity (Q ₀ ) of 3.09 mg/g. Pseudo first and second order rate kinetic equations were applied to the experimental adsorption data. The results indicate that the adsorbent system followed second order rate kinetics.     

Use of GEOCHEM-PC to predict rare earth element (REE) species in nutrient solutions

The interpretation of results of some experiments examining effects of rare earth elements (REE) on plant growth may have been complicated by rare earth phosphate precipitation. Simulations were undertaken using the computer model GEOCHEM-PC to define REE solubility limits and predict REE species in low and high ionic strength nutrient solutions. In low ionic strength solutions containing 5 M P, lanthanum phosphate (LaPO₄) precipitation is predicted to occur at solution pH>4.0, reaching a maximum (>95% of total) at pH 5.5. In high ionic strength solutions (1000 M P) over 95% of the La is predicted to precipitate as phosphate at pH>4.0. The predicted behaviour of cerium (Ce) was closely similar to that for La.At pH 5.5, the concentration of REE species in solution can be increased only after virtually all the P has been precipitated. Consequently, it is important to consider REE-P interactions in nutrient solutions when investigating REE effects on plant growth.     

Interactions among ammonia fungi on MY agar medium with varying pH

Five early-phase ammonia fungi (EP fungi) – Amblyosporium botrytis, Ascobolus denudatus, Peziza moravecii, Pseudombrophila petrakii, Coprinopsis phlyctidospora, and Tephrocybe tesquorum, and one late-phase ammonia fungus (LP fungus), Hebeloma vinosophyllum – were co-cultured on malt extract-yeast extract agar media at pH 5.5, 7.0, 8.0, and 9.0. The co-cultures among the early-stage EP fungi Amblyosporium botrytis, Ascobolus denudatus, Peziza moravecii, and Pseudombrophila petrakii, generally did not inhibit or accelerate the reproductive structure formation of the opposed fungi. Among the EP fungi, Am. botrytis, As. denudatus, and Pe. moravecii intermingled with each other. The late-stage EP fungus T. tesquorum inhibited the growth of other EP fungi. Another late-stage EP fungus, C. phlyctidospora, showed ability to invade other EP fungi, but it did not deeply invade into the territories of early-stage EP fungi. The LP fungus H. vinosophyllum tended to accelerate basidioma formation of C. phlyctidospora at pH 5.5 and 9.0. H. vinosophyllum formed the highest numbers of basidomata at pH 5.5. These results show that successive occurrence of ammonia fungi is caused by the interspecific interactions among ammonia fungi as well as by the physiological characteristic of each fungus associated with conditions of its inhabiting soils, such as pH and nitrogen concentration.     

Identification and characterization of uranium accumulation potential of a uranium mine isolated <Emphasis Type="Italic">Pseudomonas</Emphasis> strain

Uranium accumulation by a Pseudomonas strain was characterized in terms of kinetics, effect on cell viability and role of various regulatory factors (viz. pH, Co ions and metabolism). This strain was identified as Pseudomonas aeruginosa based on 16S rRNA gene and Fatty Acid Methyl Ester (FAME) analyses. The bacterium exhibited rapid, concentration and pH dependent, uranium accumulation with maximum loading of 275 mg uranium g⁻¹ dry wt. at pH 4.0. Survival studies during the period of uranium exposure indicated a viable but non growing state of the cells. Uranium accumulation remains largely insensitive to metabolic activity and presence of other co-ions except Fe³⁺. Transmission electron microscopy (TEM) confirmed the deposition of bioaccumulated uranium by live cells within the cell envelope region. Our findings suggest that the P. aeruginosa J007 has intrinsic uranium-removal and -resistance properties. Accumulated uranium is deposited within the cell envelope region providing a possible survival strategy to the bacterium. Our study contributed significantly to gain insight into bacterial interaction with uranium and will be useful in understanding the role of native microorganisms inhabiting in uranium contaminated sites in biogeochemical cycling of uranium and in bioremediation applications.     

Effects of Some Environmental Factors on Growth Characteristics of Candida utilis on Peat Hydrolysates

Samples of peat from Pine Island and Brookston bogs in Minnesota were hydrolyzed with various concentrations of HCl or H₂SO₄ solutions, before or after debituminization (an extraction process used to remove waxy materials, bitumens, from peat), to produce peak hydrolysates as growth substrates for Candida utilis. Hydrolysates were neutralized with concentrated NaOH solution to pH 3.5, 4.5, 5.0, 5.5, 6.0, and 7.0. The precipitated humates were removed by filtration. The resulting peat hydrolysates were amended with reagent-grade K₂HPO₄, K₂SO₄, and MgSO₄, 200, 100, and 50 mg per liter of peat hydrolysate, respectively. The debituminized peat produced more total nitrogen (TN) and reducing substances (RS) than the nondebituminized peat. Peat hydrolysates produced by HCl solutions contained slightly higher RS and TN than those produced by H₂SO₄ solutions; however, the latter were better growth substrates than the former. The yield coefficients in both H₂SO₄ and HCl hydrolysates initially decreased at 12 to 24 h and then increased gradually over the remaining incubation period (24 to 96 h). As TN and RS were increased, an increase in cell density, biomass, and productivity was observed. In contrast, a decrease in specific growth rate occurred as the RS and TN were increased. The generation time of C. utilis was affected by the concentrations of RS and TN. A peak substrate yield coefficient was found at pH 5.0 in HCl hydrolysates and at pH 6.0 to 6.5 in H₂SO₄ hydrolysates. Good linear correlation coefficients were found between RS and biomass of C. utilis. The coefficients of correlation increased as the TN level in hydrolysates was increased.