DABCO-based chiral ionic liquids as recoverable and reusable organocatalyst for asymmetric Diels–Alder reaction

New DABCO-based chiral ionic liquids were synthesized and evaluated in asymmetric Diels–Alder reaction of cyclopentadiene with α,β-unsaturated aldehydes or 4-phenyl-3-buten-2-one. Chiral ionic liquid of modified MacMillan catalyst having a DABCO cation and hexafluorophosphate anion acts as organocatalyst (5 mol%) for the Diels–Alder reaction of crotonaldehyde and cyclopentadiene producing 98% of the product and 87% ee (endo) in CH₃CN/H₂O (95/5) at 25°C in 2 h. The scope and limitations of the catalysis were also studied by using cyclopentadiene and α,β-unsaturated aldehydes, and the Diels–Alder products were obtained in 18%–92% yields with 68%–93% ee. The catalyst was recycled and reused up to 6 cycles with a slight drop in ee and conversion of the product.     

Enzymatic resolution of amino acid esters using ionic liquid N-ethyl pyridinium trifluoroacetate

A new ionic liquid, N-ethyl pyridinium trifluoroacetate, was used with a commercial protease to resolve N-acetyl amino acid esters in place of traditional organic solvents. Products with enantiomeric excess (ee) between 86–97% were obtained. These results show that with low concentration of this new ionic liquid, the enzymatic resolution can be increased considerably depending upon the substrate being used.     

AN EFFICIENT SYSTEM FOR THE ASYMMETRIC ACYLATION OF (R,S)-3-n-BUTYLPHTHALIDE CATALYZED BY NOVOZYME 435

Novozyme 435 could be a highly efficient catalyst in the asymmetric acylation of (R,S)-3-n-butylphthalide in tetrahydrofuran–hexane solvents. The effect of various reaction parameters such as agitation velocity, water content, mixed media, temperature, concentration of Novozyme 435, molar ratio of acetic anhydride to (R,S)-3-n-butylphthalide, reaction time, enantiomeric excess of substrate (ee_S), enantiomeric excess of product (ee_P), and enantioselective ratio (E) were studied. Tetrahydrofuran markedly improved (R,S)-3-n-butylphthalide conversion, enantiomeric excess of remaining 3-n-butylphthalide, and enantiomeric ratio. The optimum media were 50% (v/v) tetrahydrofuran and 50% (v/v) hexane. Other ideal reaction conditions were an agitation velocity of 150 rpm, 0.4% (v/v) water content, temperature of 30°C, 8 mg/mL dosage of Novozyme 435, 8:1 (0.4 mmol: 0.05 mmol) molar ratio of acetic anhydride to (R,S)-3-n-butylphthalide, and a reaction time of 48 hr. Under the optimum conditions, 96.4% ee_S and 49.3% conversion of (R,S)-3-n-butylphthalide were achieved. In addition, enantiomeric excess of the product was above 98.0%.     

Asymmetric alkene epoxidation by Mn(III)salen catalyst in ionic liquids

The enantioselective epoxidation of 6-cyano-2,2-dimethylchromene (Chrom) catalysed by the Jacobsen catalyst, using sodium hypochlorite (NaOCl) as oxygen source, at room temperature, was performed in a series of 1,3-dialkylimidazolium and tetra-alkyl-dimethylguanidium based ionic liquids. All the room temperature ionic liquids (RTILs) could be used as reaction media for the enantioselective epoxidation of the alkene giving, generally, moderate to good epoxide yields and enantiomeric excesses (ee%).For the series of ionic liquids derived from the 1,3-dialkylimidazolium cation, it was observed some relationship between the RTILs physical properties and the catalytic reaction parameters, exemplified by linear correlations between (i) the ee% and the α Kamlet-Taft parameter (hydrogen bond acidity of the solvent) for CH₂Cl₂ and [C₄m_nim][BF₄] ionic liquids (n = 1 or 2), and (ii) the ee% and the β Kamlet-Taft parameter (hydrogen bond basicity of the solvent) for CH₂Cl₂ and [C₄mim][X] ionic liquids (X = PF₆, NTf₂ or BF₄).All the RTILs could be reused in further catalytic cycles, with the exception of [C₈mim][PF₆]. The reutilisation of the Jacobsen catalyst for four times generally led to a decrease in the epoxide yield and to a slight decrease in the enantioselectivity. The recycling of the catalyst could be improved by imparting an ionic character to the complex through abstraction of the axially coordinated chloride anion (Cat 2). Other oxygen sources, such as iodosylbenzene, hydrogen peroxide and urea-hydrogen peroxide adduct, were also tested coupled with Jacobsen catalyst, but the best results were achieved with NaOCl.     

Simultaneous synthesis of enantiomerically pure (S)-amino acids and (R)-amines using α/ω-aminotransferase coupling reactions with two-liquid phase reaction system

An efficient simultaneous synthesis of enantiopure (S)-amino acids and chiral (R)-amines was achieved using α/ω-aminotransferase (α/ω-AT) coupling reaction with two-liquid phase system. As, among the enzyme components in the α/ω-AT coupling reaction systems, only ω-AT is severely hampered by product inhibition by ketone product, the coupled reaction cannot be carried out above 60 mM substrates. To overcome this problem, a two-liquid phase reaction was chosen, where dioctylphthalate was selected as the solvent based upon biocompatibility, partition coefficient and effect on enzyme activity. Using 100 mM of substrates, the AroAT/ω-AT and the AlaAT/ω-AT coupling reactions asymmetrically synthesized (S)-phenylalanine and (S)-2-aminobutyrate with 93% (>99% ee^S) and 95% (>99% ee^S) of conversion yield, and resolved the racemic α-methylbenzylamine with 56% (95% ee^R) and 54% (96% ee^R) of conversion yield, respectively. Moreover, using 300 mM of 2-oxobutyrate and 300 mM of racemic α-methylbenzylamine as substrates, the coupling reactions yielded 276 mM of (S)-2-aminobutyrate (>99% ee) and 144 mM of (R)-α-methylbenzylamine (>96% ee) in 9 h. Here, most of the reactions take place in the aqueous phase, and acetophenone mainly moved to the organic phase according to its partition coefficient.     

Lipase-catalyzed naproxen methyl ester hydrolysis in water-saturated ionic liquid: significantly enhanced enantioselectivity and stability

The lipase selective hydrolysis of Naproxen methyl ester was explored in both water-saturated isooctane and water-saturated ionic liquid 1-butyl-3-methylimidazolium hexafluoro-phoshate ([bmim]PF₆) to see any significant differences in terms of enantioselectivity and stability between two different classes of reaction media. It is shown that polar and hydrophobic of [bmim]PF₆ made it an unearthly reaction medium for hydrolysis of Naproxen methyl ester. It not only decreases the equilibrium constant (K) and enhances the enantiomeric ratio (E), consequently improves the equilibrium conversion (C_Eq) of the hydrolysis reaction and enantiomeric excess of product (ee_p), but also maintains the lipase activity. Because the lipase would not dissolve in the 1-butyl-3-methylimidazolium hexafluoro-phoshate, it can be filtrated up from 1-butyl-3-methylimidazolium hexafluoro-phoshate and recycled for several runs. The stability of lipase was improved due to the higher solubility of methanol in 1-butyl-3-methylimidazolium hexafluoro-phoshate than in isooctane.     

Microbial asymmetric reduction of ethyl 4-chloro-3-oxobutanoate to optically active ethyl-4-chloro-3-hydroxybutanoate

Summary The synthesis of ethyl (R)-4-chloro-3-hydroxybutanoate through the asymmetric reduction of ethyl 4-chloro-3-oxobutanoate with the NADPH-dependent aldehyde reductase ofSporobolomyces salmonicolor AKU 4429 is described. Under preparative scale reaction conditions with the acetone-fractionated aldehyde reductase, the amount of ethyl-4-chloro-3-hydroxybutanoate reached 33.1 mg/ml (85%ee; molar yield, 74.0%). Furthermore, conversion to ethyl (S)-4-chloro-3-hydroxybutanoate occurred on incubation with washed cells ofTrichosporon cutaneum AKU 4864 as the catalyst.     

Fractional Reactive Extraction for Symmetrical Separation of 4‐Nitro‐D,L‐Phenylalanine in Centrifugal Contactor Separators: Experiments and Modeling

The enantioselective liquid–liquid extraction of 4‐nitro‐D,L‐phenylalanine (D,L‐Nphy) using PdCl₂{(s)‐BINAP} as extractant in dichloroethane was studied experimentally in a countercurrent cascade of 10 centrifugal contactor separators (CCSs) at 5°C, involving flow ratio, extractant concentration, and Cl^? concentration. The steady‐state enantiomeric excess (ee) in both stream exits was 90.86% at a 93.29% yield. The predicted value was modeled using an equilibrium stage approach. The correlation between model and experiment was satisfactory. The model was applied to optimize the production of both enantiomers in >97% ee and >99% ee. 14 stages and 16 stages are required for 97% ee and 99% ee for both enantiomers, respectively. Chirality 27:75–81, 2015. © 2014 Wiley Periodicals, Inc.     

Changes in Volatile Fatty Acids and Free Amino Acids during Air-Tobacco Stalks

In our searching program for novel sorbicillin related compounds, three novel compounds, spirosorbicillinols A (1), B (2), and C (3), were isolated from the fermentation broth of the USF-4860 strain isolated from a soil sample. The planar structures of compounds 1–3 were determined from spectroscopic evidence and degradation reaction, and that of 1 was the same as that of 2. The relative stereochemistries of compounds 1–3 were determined by ¹H-¹H coupling constants, the elucidation of HMBC and NOESY spectra in detail. 1 and 2 were stereoisomers at C8 position, each other. We propose that compounds 1 and 2 were formed by exo and endo intermolecular Diels-Alder reaction between sorbicillinol as a diene and scytolide (proposed precursor-1) as a dienophile, respectively. Similarly, we propose that compound 3 was formed by an endo intermolecular Diels-Alder reaction between sorbicillinol and proposed precursor-2.     

Enantioselective hydrogenation in ionic liquids: Recyclability of the [Rh(COD)(DIPAMP)]BF4 catalyst in [bmim][BF4]

Asymmetric hydrogenation of (Z)-α-acetamidocinnamic acid and methyl-(Z)-α-acetamidocinnamate by [Rh(COD)(DIPAMP)][BF₄] catalyst was studied in ionic liquid/isopropanol two-phase catalytic system. In this system 97–100% conversion was achieved and the enantioselectivity values were over 90%. Application of [bmim][BF₄] ionic liquid made it possible to recycle the catalyst in consecutive cycles. After four cycles, neither significant conversion nor enantioselectivity decrease was observed.     

Novozym 435-catalyzed regioselective benzoylation of 1-β-d-arabinofuranosylcytosine in a co-solvent mixture of C4MIm·PF6 and pyridine

Regioselective acylation of 1-β-d-arabinofuranosylcytosine (ara-C), using vinyl benzoate (VB) as acyl donor and Novozym 435 as catalyst, was carried out in various reaction media including pure organic solvents, organic solvent mixtures, and ionic liquid (IL)-containing systems. Although the reaction was highly regioselective in all the media assayed, remarkable enhancement of substrate conversion was achieved with a co-solvent mixture of 1-butyl-3-methylimidazolium hexafluorophosphate (C₄MIm·PF₆) and pyridine as the reaction medium, compared with other media tested. Additionally, the results demonstrated that the anions of ILs had a significant effect on the initial rate and substrate conversion. To better understand the reaction performed in IL-containing system, several variables were examined. The optimum molar ratio of VB to ara-C, initial water activity, temperature and shaking rate were 25:1, 0.11, 40°C and 250rpm, respectively. Under these optimum reaction conditions, the initial rate, substrate conversion, and regioselectivity were 0.49mMmin^?1, 99.4 and 99%, respectively. The product of the lipase-catalyzed reaction was characterized by ¹³C NMR and was shown to be 5′-O-benzoyl ara-C.     

Ab initio and DFT study on the electrophilic addition of bromine to endo-tricyclo[3.2.1.02,4]oct-6-ene

Full geometric optimization of endo-tricyclo[3.2.1.0^2,4]oct-6-ene (endo-TCO) by ab initio and DFT methods allowed us to investigate the structure of the molecule. The double bond is endo-pyramidalized and its two faces are no longer found to be equivalent. The exo face of the double bond has regions with far more electron density (q_i,HOMO) and more negative electrostatic potential. The endo-TCO-Br₂ system was investigated at the B3LYP/6-311+G** level and the endo-TCO···Br₂(exo) molecular complex was found to be relatively more stable than the endo-TCO···Br₂(endo) complex. The cationic intermediates of the reaction were studied by ab initio and DFT methods. The bridged exo-bromonium cation(I) is relatively more stable than the endo-bromonium cation(II). An absolute exo-facial selectivity should be observed in the addition reaction of Br₂ to endo-TCO, which is caused by steric and electronic factors. The nonclassical rearranged cation IV was found to be the most stable ion among the cationic intermediates and the ionic addition occurs via the formation of this cation. The mechanism of the addition reaction is also discussed.     

ENANTIOSELECTIVE ACYLATION OF β-PHENYLALANINE ACID AND ITS DERIVATIVES CATALYZED BY PENICILLIN G ACYLASE FROM Alcaligenes faecalis

This study developed a simple, efficient method for producing racemic β-phenylalanine acid (BPA) and its derivatives via the enantioselective acylation catalyzed by the penicillin G acylase from Alcaligenes faecalis (Af-PGA). When the reaction was run at 25°C and pH 10 in an aqueous medium containing phenylacetamide and BPA in a molar ratio of 2:1, 8 U/mL enzyme and 0.1 M BPA, the maximum BPA conversion efficiency at 40 min only reached 36.1%, which, however, increased to 42.9% as the pH value and the molar ratio of phenylacetamide to BPA were elevated to 11 and 3:1, respectively. Under the relatively optimum reaction conditions, the maximum conversion efficiencies of BPA derivatives all reached about 50% in a relatively short reaction time (45–90 min). The enantiomeric excess value of product (ee_p ) and enantiomeric excess value of substrate (ee_s ) were all above 98% and 95%, respectively. These results suggest that the method established in this study is practical, effective, and environmentally benign and may be applied to industrial production of enantiomerically pure BPA and its derivatives.     

Enantioselectivity of lipase-catalyzed hydrolysis of some 2-chloroethyl 2-arylpropanoates studied by chiral reversed-phase liquid chromatography

A technique based exclusively on chiral reversed-phase liquid chromatography has been shown to greatly facilitate studies of enantioselectivity in lipase-catalyzed hydrolysis of chiral organic esters. Only two sets of experimental data are needed to calculate the enantioselectivity (E) of a kinetically controlled enantiomer-differentiating reaction of this kind, viz. the enantiomeric excess of the product (ee_p) or substrate (ee_s), and the degree of substrate conversion (c). The product enantiomers are well separated on a BSA-based column, giving ee_p directly. In addition, separation of the (unresolved) ester substrate from the enantiomeric products gives c by integration. Via an optimization of the mobile phase used in the chiral chromatographic system, both these parameters can often be determined in a single run. Highly precise and detailed kinetic studies of the enzymatic reaction can thus be performed. In this way, E-values have been determined for a series of 2-chloroethyl 2-arylpropanoates hydrolyzed in the presence of a Candida cylindracea lipase at pH 6.0 and 7.1. Effects on the E-values from a partial purification and further processing of the lipase have also been studied.     

Enhancing cofactor recycling in the bioconversion of racemic alcohols to chiral amines with alcohol dehydrogenase and amine dehydrogenase by coupling cells and cell-free system

Alcohol dehydrogenase (ADH) and amine dehydrogenase (AmDH)-catalyzed one-pot cascade conversion of an alcohol to an amine provides a simple preparation of chiral amines. To enhance the cofactor recycling in this reaction, we report a new concept of coupling whole-cells with the cell-free system to enable separated intracellular and extracellular cofactor regeneration and recycling. This was demonstrated by the respective biotransformation of racemic 4-phenyl-2-butanol 1a and 1-phenyl-2-propanol 1b to (R)-4-phenylbutan-2-amine 3a and (R)-1-phenylpropan-2-amine 3b . Escherichia coli cells expressing S-enantioselective CpsADH, R-enantioselective PfODH, and NADH oxidase (NOX) was developed to oxidize racemic alcohols 1a–b to ketones 2a–b with full conversion via intracellular NAD⁺ recycling. AmDH and glucose dehydrogenase (GDH) were used to convert ketones 2a–b to amines (R)- 3a–b with 89–94% conversion and 891–943 times recycling of NADH. Combining the cells and enzymes for the cascade transformation of racemic alcohols 1a–b gave 70% and 48% conversion to the amines (R)- 3a and (R)-3 b in 99% ee, with a total turnover number (TTN) of 350 and 240 for NADH recycling, respectively. Improved results were obtained by using the E. coli cells with immobilized AmDH and GDH: (R)- 3a was produced in 99% ee with 71–84% conversion and a TTN of 1410-1260 for NADH recycling, the highest value so far for the ADH–AmDH-catalyzed cascade conversion of alcohols to amines. The concept might be generally applicable to this type of reactions.     

Optimization of (R,S)-1-phenylethanol kinetic resolution over Candida antarctica lipase B in ionic liquids

The kinetic resolution of racemates constitutes one major route to manufacture optically pure compounds. The enzymatic kinetic resolution of (R,S)-1-phenylethanol over Candida antarctica lipase B (CALB) by using vinyl acetate as the acyl donor in the acylation reaction was chosen as model reaction. A systematic screening and optimization of the reaction parameters, such as enzyme, ionic liquid and substrates concentrations with respect to the final product concentration, were performed. The enantioselectivity of immobilized CALB commercial preparation, Novozym 435, was assayed in several ionic liquids as reaction media. In particular, three different ionic liquids: (i) 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], (ii) 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF₄] and (iii) 1-ethyl-3-methylimidazolium triflimide [emim][NTf₂] were tested. At 6.6% (w/w) of Novozym 435, dispersed in 9.520 M of [bmim][PF₆] at 313.15 K, using an equimolar ratio of vinyl acetate/(R,S)-1-phenylethanol after 3 h of bioconversion, the highest possible conversion (50%) was reached with enantiomeric excess for substrate higher than 99%.     

Enzymatic synthesis of poly(ε-caprolactone) in monocationic and dicationic ionic liquids

Enzymatic polymerization can offer metal-free routes to polymer materials that could be used in biomedical applications. To take advantage of the unique properties of ionic liquids (ILs) for enzyme stability, monocationic ionic liquid (MIL) and dicationic ionic liquid (DIL) were used to promote the ring-opening polymerization of ε-caprolactone (ε-CL) using Candida antarctica lipase B as catalyst. Considering the molecular weight (M _n ) and reaction yield of the resulting polymer (PCL), high density and viscosity of ILs would be good, especially in the case of DIL. With the same total alkyl chain length, the density and viscosity of [C₄(C₆Im)₂][PF₆]₂ were higher than that of [C₁₂MIm][PF₆]. Using a lipase/CL/ILs ratio of 1:20:20 (by wt) for 48 h at 90 °C, the highest M _n and reaction yield of PCL were 26,200 g/mol and 62 % with [C₄(C₆Im)₂][PF₆]₂, while the M _n and reaction yield of PCL obtained in [C₁₂MIm][PF₆] were 11,700 g/mol and 37 %.     

Resolution of (R,S)‐ibuprofen catalyzed by immobilized Novozym40086 in organic phase

The enantioselective esterification of ibuprofen catalyzed by Novozym40086 was successfully conducted in organic solvent. Removing‐water reagent was added into the reaction mixture to remove water produced in the esterification. The effects of temperature, n‐hexanol concentration, ibuprofen concentration, and loading of enzymes were investigated. Under the condition of equilibrium, the thermodynamic equilibrium constant (K) of 7.697 and enantioselectivity (E) of 8.512 were obtained. The esterification reaction achieved its equilibrium in approximately 30 hours with conversion of 56% and ee_S of 93.78%. The predicted values of X and ee_S were 67.90% and 95.60%, respectively. The experimental value is approximately equal to the theoretical value, which indicates the feasibility of ideal models.     

New catalyst design for polymerization of norbornene esters by reducing intramolecular interaction

We have used density functional theory to study palladium-based catalysts commonly used for the polymerization of norbornene derivatives with an ester group. Exo–exo, exo–endo, and endo–endo isomers of catalyst complexes were investigated; the endo–endo isomer was the most stable and inactive due to an intramolecular interaction between Pd and O of the carbonyl group. Phosphine groups are effective in minimizing the Pd–O interaction in the endo–endo isomer and P(C₆H₁₁)₃ was found to be the most efficient reagent. The intramolecular Pd–O interactions were estimated using model complexes, and it was demonstrated that they play a crucial role in stabilizing the endo–endo isomer.Figure Methyl ester norbornene complex for endo–endo isomers with P(C₆H₁₁)₃     

Extracting keratin from chicken feathers by using a hydrophobic ionic liquid

Keratin was extracted from chicken feathers by using a hydrophobic ionic liquid (IL), 1-hydroxyethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide ([HOEMIm][NTf₂]). Extracted keratin has good solubility in water while the ionic liquid is immiscible with water, and therefore the extracted keratin could be easily separated from the reaction system by water. The effects of ionic liquid, NaHSO₃, reaction temperature and time were investigated and extracting conditions were optimized. The maximum yield of keratin was up to about 21% with mass ratio of feathers to NaHSO₃1:1 and mass ratio of feathers to ionic liquid 1:40 at 80 °C for 4 h. Moreover, there was no obvious loss in the yield after ionic liquid was reused for five batches under optimized conditions. In addition, the recovery of ionic liquid was about 95% each time. The results indicated that [HOEMIm][NTf₂] was very efficient as catalyst and solvent for dissolving feathers and could be easily recovered due to its hydrophobicity.