Development of an aspartic acid-based cross-linking monomer for improved bioseparations

Improved specificity and binding affinity by molecularly imprinted polymers is possible by development of novel functional materials. Furthermore, increasing the cross-link density of imprinted polymers by using cross-linking functional groups was anticipated to improve polymer molecular recognition. A novel cross-linking monomer derived from an L-aspartic acid precursor was synthesized and employed in molecularly imprinted polymers to mimic more closely the scaffolding of proteins, and thus provide more protein-like selectivity. Chromatographic results revealed a more than 7-fold improvement in polymers imprinted using the new monomer versus a traditionally formulated polymer imprinted with methacrylic acid as the functional monomer.     

Molecular imprinting and solid phase extraction of flavonoid compounds

Molecularly imprinted polymers (MIPs) for quercetin have been successfully prepared by a thermal polymerization method using 4-vinylpyridine (4-VP) and ethylene glycol dimethacrylate (EDMA) as functional monomer and cross-linker, respectively. The obtained molecularly imprinted polymers were evaluated by HPLC using organic eluents, with respect to their selective recognition properties for quercetin and related compounds of the flavonoid class. Two equivalent control polymers, a blank polymer and a polymer imprinted with a structural analogous template, were synthesized, in order to confirm the obtained results. Furthermore, preliminary experiments confirm the applicability of the prepared MIPs for solid phase extraction (SPE), as rapid and facile clean-up of wine samples for HPLC analysis is an envisaged field of application. The successful preparation of molecularly imprinted polymers for flavones provides an innovative opportunity for the development of advanced separation materials, with applications in the field of wine and fermentation analysis.     

Controlling size and uniformity of molecularly imprinted nanoparticles using auxiliary template

Molecularly imprinted nanomaterials are gaining substantial importance. As a simple and efficient synthetic method, precipitation polymerization has been used to prepare uniform molecularly imprinted microspheres for numerous template compounds. Despite of its general applicability, the difficulty of obtaining uniform particles for some difficult templates by precipitation polymerization has been reported. In this work, we attempted to produce uniform atrazine-imprinted nanoparticles using propranolol as an auxiliary template under standard precipitation polymerization condition. When propranolol was added in the prepolymerization mixture for atrazine imprinting, it displayed a significant effect on particle size and size distribution of atrazine-imprinted polymers. The molecular binding characteristics of the molecularly imprinted polymer (MIP) nanoparticles were found to be dependent on the relative ratios of the two templates. Under an optimal template propranolol-atrazine ratio of 1:3 mol/mol, very uniform imprinted nanoparticles (d(H) =?106?nm) with a polydispersity index of 0.07 were obtained. The loading of the auxiliary template (propranolol) could be reduced to as low as 5% without sacrificing the uniformity of the MIP nanoparticles. The uniform MIP nanoparticles could be easily encapsulated into polyethylene terephthalate nanofibers using a simple electrospinning technique. The composite nanofibers containing the MIP nanoparticles maintained specific molecular binding capability for both atrazine and propranolol.     

Synthesis and evaluation of a selective molecularly imprinted polymer for the contraceptive drug levonorgestrel

A molecularly imprinted polymer (MIP) has been prepared using levonorgestrel (LEV) as template. The polymer was synthesised in a non-covalent approach using methacrylic acid (MAA) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linking monomer via a free radical polymerization. An equivalent blank polymer was also synthesised in the absence of the template compound. Batch adsorption experiments were used to evaluate the binding affinity of the imprinted polymer. After packing MIP into a stainless steel column (150 mm x 4.6 mm i.d.), retention and elution of the template and related compounds were evaluated by high-performance liquid chromatography (HPLC). This LEV imprinted polymer was further applied for selective solid phase extraction (SPE) of LEV from human serum. It was confirmed that the binding ability of the prepared MIP for LEV was essentially sufficient in the presence of other compounds coexisting in serum sample. Therefore, as a selective and efficient solid phase material, LEV imprinted polymer has a high potential application in analysis of this steroidal hormone in clinical purposes.     

New biomedical devices with selective peptide recognition properties. Part 1: Characterization and cytotoxicity of molecularly imprinted polymers

Molecular imprinting is a technique for the synthesis of polymers capable to bind target molecules selectively. The imprinting of large proteins, such as cell adhesion proteins or cell receptors, opens the way to important and innovative biomedical applications. However, such molecules can incur into important conformational changes during the preparation of the imprinted polymer impairing the specificity of the recognition cavities. The "epitope approach" can overcome this limit by adopting, as template, a short peptide sequence representative of an accessible fragment of a larger protein. The resulting imprinted polymer can recognize both the template and the whole molecule thanks to the specific cavities for the epitope. In this work two molecularly imprinted polymer formulations (a macroporous monolith and nanospheres) were obtained using the protected peptide Z-Thr-Ala-Ala-OMe, as template, and Z-Thr-Ile-Leu-OMe, as analogue for the selectivity evaluation, methacrylic acid, as functional monomer, and trimethylolpropane trimethacrylate and pentaerythritol triacrylate (PETRA), as cross-linkers. Polymers were synthesized by precipitation polymerization and characterized by standard techniques. Polymerization and rebinding solutions were analyzed by high performance liquid chromatography. The highly cross-linked polymers retained about 70% of the total template amount, against (20% for the less cross-linked ones). The extracted template amount and the rebinding capacity decreased with the cross-linking degree, while the selectivity showed the opposite behaviour. The PETRA cross-linked polymers showed the best recognition (MIP 2-, alpha=1.71) and selectivity (MIP 2+, alpha'=5.58) capabilities. The cytotoxicity tests showed normal adhesion and proliferation of fibroblasts cultured in the medium that was put in contact with the imprinted polymers.     

Direct rapid synthesis of MIP beads in SPE cartridges

Selecting optimal compositions for non-covalent molecularly imprinted polymers (MIPs) and screening for appropriate rebinding conditions necessitates synthesising a large number of polymers. This is extremely labour-intensive and usually results in very limited "optimisation" in studies of MIPs. Here, a new method is proposed for rapid synthesis of MIPs in a beaded form that can be used directly in many different performance evaluation studies. The method is based on synthesis of spherical particles by suspension polymerisation in liquid fluorocarbon [Mayes, A., Mosbach, K., 1996. Molecularly imprinted polymer beads: suspension polymerisation using a liquid perfluorocarbon as the dispersing phase. Anal. Chem. 68, 3769-3774]. The polymers were directly polymerised under UV light in solid phase extraction (SPE) cartridges, then washed and extracted in the same cartridges where they had been synthesised, resulting in a rapid and automatable process that requires no transfer or manipulation of the polymer particles. The particles were similar in terms of size, morphology and functional performance to particles obtained by suspension polymerisation in fluorocarbon solvent using a conventional reactor. In this initial study, 36 polymers were synthesised to study the effect of a variation in the type and amount of four different functional monomers, methacrylic acid (MAA), acrylic acid (AA), hydroxyethyl methacrylate (HEMA) and 2-vinylpyridine (2-VPy), for the imprinting of propranolol and morphine. The performance of polymers synthesised using MAA was as expected, but those synthesised with AA as functional monomer showed more surprising rebinding properties as a function of monomer to cross-linker ratios, demonstrating the potential value of pragmatic synthesis and screening approaches to polymer optimisation.     

Combinatorial screening of polymer precursors for preparation of benzo[α] pyrene imprinted polymer: an ab initio computational approach

A combinatorial screening procedure was used for the selection of polymer precursors in the preparation of molecularly imprinted polymer (MIP), which is useful in the detection of the air pollution marker molecule benzo[a]pyrene (BAP). Molecular imprinting is a technique for the preparation of polymer materials with specific molecular recognition receptors. The preparation of imprinted polymers requires polymer precursors such as functional monomer, cross-linking monomer, solvent, an initiator of polymerization and thermal or UV radiation. A virtual library of functional monomers was prepared based on interaction binding scores computed using HyperChem Release 8.0 software. Initially, the possible minimum energy conformation of the monomers and BAP were optimized using the semi-empirical (PM3) quantum method. The binding energy between the functional monomer and the template (BAP) was computed using the Hartree-Fock (HF) method with 6-31 G basis set, which is an ab initio approach based on Moller-Plesset second order perturbation theory (MP2). From the computations, methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA) were selected for preparation of BAP imprinted polymer. The larger interaction energy (ΔE) represents possibility of more affinity binding sites formation in the polymer, which provides high binding capacity. The theoretical predictions were complimented through adsorption experiments. There is a good agreement between experimental binding results and theoretical computations, which provides further evidence of the validity of the usefulness of computational screening procedures in the selection of appropriate MIP precursors in an experiment-free way.     

Molecular imprinting of nitrophenol and hydroxybenzoic acid isomers: effect of molecular structure and acidity on imprinting

Three nitrophenol isomer-imprinted polymers were prepared under the same conditions using 4-vinylpyridine as a functional monomer. Different recognition capacities for template molecules were observed for the three polymers. Another imprinting system with stronger acidity than nitrophenol isomers, 2-hydroxybenzoic acid (salicylic acid) and 4-hydroxybenzoic acid, was imprinted using 4-vinylpyridine or acrylamide as functional monomer respectively. Both 4-hydroxybenzoic acid-imprinted polymers using the two monomers showed recognition ability for the template molecule. However, when acrylamide was chosen as functional monomer, the salicylic acid-imprinted polymer showed very weak recognition for the template molecule, whereas strong recognition ability of the resultant polymer for salicylic acid was observed with 4-vinylpyridine as functional monomer. It seems that the structure and acidity of template molecules is responsible for the difference in recognition, by influencing the formation and strength of interaction between template molecule and functional monomer during the imprinting process. An understanding of the mechanism of molecular imprinting and molecular recognition of MIPs will help to predict the selectivity of MIPs on the basis of template molecule properties.     

Molecularly imprinted micro and nanospheres for the selective recognition of 17beta-estradiol

A one-step precipitation polymerization procedure for the synthesis of molecularly imprinted polymers selective for 17beta-estradiol yielding imprinted micro and nanospheres was developed in this study and compared to templated materials obtained by conventional bulk polymerization. The polymer particles prepared by precipitation polymerization exhibited a regular spherical shape at the micro and nanoscale with a high degree of monodispersity. Moreover, the influence of the polymerization temperature, and the ratio of functional monomer to cross-linker on the size of the obtained particles was investigated. The selectivity of the imprinted micro and nanospheres was evaluated by HPLC analysis and via radioligand binding assays. HPLC separation experiments revealed that the imprinted microspheres provide higher or similar affinity to the template in contrast to imprinted polymers prepared by conventional bulk polymerization or synthesized by multi-step swelling/polymerization methods. The dimensions of the imprinted nanospheres facilitate suspension in solution rendering them ideal for binding assay applications. Results from saturation and displacement assays prove that the imprinted nanospheres exhibit superior specific affinity to the target molecule in contrast to control materials. The binding properties of the nanospheres including binding isotherms and affinity distribution were studied via Freundlich isotherm affinity distribution (FIAD) analysis. Moreover, release experiments show that 70% of rebound 17beta-estradiol was released from the imprinted nanospheres within the first 2 h, while more intimately bound 17beta-estradiol molecules (approx. 16%) were released in the following 42 h. Fitting Brunnauer-Emmet-Teller (BET) multi-point adsorption isotherms to the obtained results indicated that the micro and nanospheres are characterized by a comparatively homogenous and narrow distribution of mesopores in contrast to the corresponding bulk polymers.     

Influence of polymerization temperature on the molecular recognition of imprinted polymers

This paper aimed at investigating the influence of polymerization temperature on the molecular recognition of molecularly imprinted polymers (MIPs) based on multiple non-covalent interactions. 3-l-Phenylalanylaminopyridine (3-l-PheNHPy) imprinted polymers were prepared using azobisnitriles as either thermal initiators or photoinitiators at various temperatures of 10, 40 and 60 degrees C, respectively. These polymers were subsequently evaluated in the high-performance liquid chromatographic (HPLC) mode for enantioselectivity. An unexpected result shows that polymer prepared at 40 degrees C has the highest enantioselectivity, but not the polymer prepared at lower temperature of 10 degrees C. Further, the effect of elution temperature and sample load on the selectivity of polymers was investigated in detail. In order to get a better understanding of the "exception", the influence of polymerization temperature on the polymerization extent and polymer morphology was studied by FT-IR spectrum test, cross-polarization magic angle spinning (CP-MAS) (13)NMR spectra experiment and pore analysis. Based on these results we attribute this "exception" to that there is a tradeoff between the extent of polymerization and stabilization of the template-functional monomer complexes. And an optimal polymerization temperature can be found for each combination of template and monomer.     

Direct detection of analyte binding to single molecularly imprinted polymer particles by confocal Raman spectroscopy

We describe the use of Raman spectroscopy to detect and quantify, for the first time, the presence of the imprinting template in single molecularly imprinted polymer microspheres. The polymers were imprinted with the β-blocking drugs propranolol and atenolol, and precipitation polymerization was used to obtain spherical particles of diameters of 200 nm and 1.5 μm. The size of the Raman laser spot being between 1 μm and a few μm, the nanoparticles were used for bulk detection whereas with micrometer-sized particles, quantitative measurements on single particles were possible. The laser power, and consequently the acquisition times, needed to be adapted as a function of the polymer and template used in order to avoid burning. Analyte quantification from Raman spectra is straightforward by determining the peak height of a typical Raman band of the analyte, and by using a typical polymer peak for normalization. Relatively low detection limits down to 1 μM have been reached for the detection of S-propranolol through bulk measurements on MIP nanoparticles.     

Study on the recognition of templates and their analogues on molecularly imprinted polymer using computational and conformational analysis approaches

A simplified computational model was proposed to simulate the synthesis of molecularly imprinted polymers (MIP), removal of template and recognition of the template and its analogues by MIP. The MIPs with nicotinamide and iso-nicotinamide as templates were prepared using methacrylic acid as functional monomer. Based on our computational model, the interaction energies between the monomer and the template or its analogues were calculated, which were well correlated with the retention factors and imprinting factors obtained on HPLC columns packed with the corresponding MIP particles. The imprinting effects of the template and its analogues were also investigated from the viewpoint of conformational analysis. The computational data were successfully used to predict the chromatographic behaviour of some chemicals in separation on HPLC columns. We believe that the computational method will find application in designing monomers for MIP synthesis and in studying recognition of templates and their analogues on MIP.     

Development of a Selective Molecularly Imprinted Polymer-Based Solid-Phase Extraction for Copper from Food Samples

In this study is proposed a pre-concentration procedure using molecular imprinted polymer for the determination of copper in food samples. The copper imprinted polymer was prepared by free radical solution polymerization in a tube containing copper, morin, 4-vinylpyridine as a functional monomer, ethyleneglycoldimethacrylate as a cross-linking monomer, and 2,2′-azobisisobutyronitrile as an initiator. The polymer particles synthesized both before and after leaching have been characterized by infrared and X-ray diffraction studies. The effect of different variables such as pH of solution, adsorption and desorption time, type, and least amount of eluent for elution of the complex of polymer was evaluated. Extraction efficiencies more than 99% were obtained by elution of the polymer with 10 mL of 0.5 mol L^?1 EDTA. The detection limit of the proposed procedure was 0.14 μg L^?1. The method was applied to the determination of copper in food real samples.     

Characterization of molecularly imprinted polymers using a new polar solvent titration method

A new method of characterizing molecularly imprinted polymers (MIPs) was developed and tested, which provides a more accurate means of identifying and measuring the molecular imprinting effect. In the new polar solvent titration method, a series of imprinted and non‐imprinted polymers were prepared in solutions containing increasing concentrations of a polar solvent. The polar solvent additives systematically disrupted the templation and monomer aggregation processes in the prepolymerization solutions, and the extent of disruption was captured by the polymerization process. The changes in binding capacity within each series of polymers were measured, providing a quantitative assessment of the templation and monomer aggregation processes in the imprinted and non‐imprinted polymers. The new method was tested using three different diphenyl phosphate imprinted polymers made using three different urea functional monomers. Each monomer had varying efficiencies of templation and monomer aggregation. The new MIP characterization method was found to have several advantages. To independently verify the new characterization method, the MIPs were also characterized using traditional binding isotherm analyses. The two methods appeared to give consistent conclusions. First, the polar solvent titration method is less susceptible to false positives in identifying the imprinting effect. Second, the method is able to differentiate and quantify changes in binding capacity, as measured at a fixed guest and polymer concentration, arising from templation or monomer aggregation processes in the prepolymerization solution. Third, the method was also easy to carry out, taking advantage of the ease of preparing MIPs. Copyright © 2014 John Wiley & Sons, Ltd.     

Protein-responsive imprinted polymers with specific shrinking and rebinding

Stimuli-responsive protein imprinted polymers were obtained via a combination of molecular imprinting and reversible stimuli-responsive polymer using lysozyme or cytochrome c as template, N-isopropylacrylamide (NIPA) as major monomer, methacrylic acid (MAA) and acrylamide (AAm) as functional co-monomers, and N,N-methylenebisacrylamide (MBAAm) as crosslinker. The molecularly imprinted polymers (MIPs) can respond not only to external stimuli such as temperature and salt concentration, but also to the corresponding template protein with significant specific volume shrinking. This specific shrinking behavior was attributed to the synergistic effect of multiple-site weak interactions (electrostatic force, hydrogen bonding and hydrophobic interaction) and the cavity effect. The MIPs showed highly selective adsorption of template proteins with specific shrinking compared with the non-imprinted polymers. The results indicated that the MIPs seemed to change shape to accommodate the conformation of the template protein leading to the formation of a shape complementary cavity.     

Probing the limits of molecular imprinting: strategies with a template of limited size and functionality

A series of polymers molecularly imprinted with the general anaesthetic propofol were synthesized using both semi- and non-covalent approaches. The polymers were evaluated with respect to template rebinding in both aqueous and organic media. In aqueous media, the observed propofol binding in these polymer systems was largely hydrophobic and non-specific in nature. In non-polar solvents such as hexane, electrostatic (hydrogen bonding) interactions dominate resulting in some selectivity. The implication of these results, in conjunction with those obtained using structures of similar size in other studies, is that propofol, a template possessing limited functionality and size, appears to define the lower limit for template size and degree of functionalization that can be used for the creation of ligand-selective recognition sites in molecularly imprinted polymers. Furthermore, studies with alternative ligands indicate that the steric crowding of a ligand's functionality to the polymer contributes to the extent of polymer-ligand recognition.     

Synthesis and evaluation of uniformly sized nalidixic acid-imprinted nanospheres based on precipitation polymerization method for analytical and biomedical applications

For the first time in this work, uniform molecularly imprinted polymer (MIP) nanoparticles were prepared using nalidixic acid as a template. The MIP nanoparticles were successfully synthesized by precipitation polymerization applying methacrylic acid (MAA) as a functional monomer and trimethylolpropane trimethacrylate (TRIM) as a cross-linking monomer at different mole ratios. The morphology, binding, recognition, selectivity, and in vitro release behaviors of obtained particles were studied. The produced polymers were characterized by Fourier transform infrared spectroscopy and differential scanning calorimetric. Furthermore, their morphology was analyzed accurately by scanning electron microscopy, photon correlation spectroscopy, and Brunauer-Emmett-Teller analysis. The nanospheres and microspheres with mean diameter values of 94 nm, 256 nm, and 1.2 μm were obtained using nalidixic acid-MAA-TRIM various mole ratios. Among the MIPs, the product with nalidixic acid-MAA-TRIM mole ratio of 1:12:12 established nanospheres with the lowest polydispersity index (0.003), an average pore diameter (12 nm), and the highest specific surface area (280 m(2) g(-1)) and selectivity factor (10.4). Results from binding experiments demonstrated that the imprinted nanospheres with a 94-nm mean diameter and a binding capacity of 28 mg of nalidixic acid per gram of polymer had higher specific affinity to nalidixic acid in contrast with the other imprinted nanospheres, microspheres, and nonimprinted particles. However, the binding performance of imprinted nanospheres in human serum was estimated using high-performance liquid chromatography analysis (binding approximately 98% of nalidixic acid). In addition, release experiments proved to be successful in the controlled release of nalidixic acid during a long period. The 20% of loaded nalidixic acid was released from the imprinted nanospheres within the first 20 h, whereas the remaining 80% was released in the after 120 h. The nalidixic acid release kinetics from the MIPs was highly affected by properties of the particles.     

Chiral separation using molecularly imprinted heteroaromatic polymers

Novel molecularly imprinted polymer systems utilizing 4-vinylpyridine and 1-vinylimidazole as functional monomers have been developed for enantioselective recognition of carboxylic and N-protected amino acids. Non-covalent interactions between the functional monomers and the template molecules were the source of the subsequent recognition sites in the resultant polymers. The capacity of the polymers for molecular recognition was investigated by using them as stationary phases in the HPLC mode. Polymers prepared with 4-vinylpyridine were found to be more efficient in racemic resolution than those prepared with 1-vinylimidazole. When applying a racemic mixture of the template molecule, the polymers showed highest affinity for the enantiomer used as template. Imprints of a racemic template molecule, as expected, did not exhibit enantioselectivity. The optimal molar ratio of 4-vinylpyridine to the template Cbz-L -Asp-OH in the polymerization mixture was determined to be 12:1. In addition to enantioselectivity, the investigated polymers demonstrated ‘ligand selectivity’ e.g., a Cbz-L -Asp-OH-imprinted polymer was able to separate Cbz-D ,L -Asp-OH, but was unable to separate Cbz-D ,L -Glu-OH.     

Mechanisms underlying molecularly imprinted polymer molecular memory and the role of crosslinker: resolving debate on the nature of template recognition in phenylalanine anilide imprinted polymers

A series of molecular dynamics simulations of prepolymerization mixtures for phenylalanine anilide imprinted co-(ethylene glycol dimethacrylate-methacrylic acid) molecularly imprinted polymers have been employed to investigate the mechanistic basis for template selective recognition in these systems. This has provided new insights on the mechanisms underlying template recognition, in particular the significant role played by the crosslinking agent. Importantly, the study supports the occurrence of template self-association events that allows us to resolve debate between the two previously proposed models used to explain this system's underlying recognition mechanisms. Moreover, the complexity of the molecular level events underlying template complexation is highlighted by this study, a factor that should be considered in rational molecularly imprinted polymer design, especially with respect to recognition site heterogeneity.