Lovastatin biosynthesis by Aspergillus terreus with the simultaneous use of lactose and glycerol in a discontinuous fed-batch culture

The influence of various combinations of glycerol and lactose feed on the biosynthesis of two polyketide metabolites, lovastatin and (+)-geodin, by Aspergillus terreus ATCC20542 in a discontinuous fed-batch culture was presented. In these experiments lactose and/or glycerol were also used as the initial carbon substrates in the cultivation media. The application of glycerol feed, when lactose is the initial substrate, leads to the appreciable lovastatin concentration in the broth (122.4 mg l⁻¹), nevertheless the abundant (+)-geodin level is at the same time obtained (255.5 mg l⁻¹). The cultures with glycerol as the initial substrate and fed with lactose produce less lovastatin and (+)-geodin. The application of the various combined glycerol and/or lactose feeds allows for improving lovastatin production up to 161.8 mg l⁻¹ and decreases (+)-geodin concentration to 98.7 mg l⁻¹. The analysis of product formation rates and yield coefficients indicates that lovastatin is more efficiently produced on lactose, especially in the initial stages of the cultivation. Glycerol efficiently sustains fungal activity to form these polyketides in the late idiophase but it mainly favours (+)-geodin formation, if solely used in the feed. The feeds performed both with lactose and glycerol occur to be the most desired to maximise lovastatin and minimise (+)-geodin formation.     

KatG from Salmonella Typhimurium is a peroxynitritase

Pathogenic bacteria elicit protective responses to oxidative and nitrosative stresses. Although such responses are generally distinct, it was recently reported in Mycobacterium tuberculosis that catalase-peroxidase (KatG), a classical defence against peroxides, also exhibits peroxynitritase activity. Here, the katG gene from Salmonella Typhimurium was cloned and protein purified and characterised. An increase in the rate of decomposition of peroxynitrite was observed for KatG from the enterobacterium with a second-order rate constant of 4.2 × 10⁴ M⁻¹ s⁻¹ at pH 7.4, 25 °C. This enzyme was able to reduce dihydrorhodamine oxidation by peroxynitrite to ∼83%. Given the peroxynitritase activity demonstrated here it is likely that KatG may play a wider role in the detoxification of oxidative stresses than previously thought.     

Rewarming rates of two large hibernators: Comparison of a monotreme and a eutherian

We measured body temperatures in two large hibernating mammals, the eutherian alpine marmot (Marmota marmota) and the egg-laying echidna (Tachyglossus aculeatus) from unrestrained animals in their natural environment. In both species hibernation is broken every 13 days on average by rewarming to euthermic temperatures. We found that the time course of a rewarming could be closely fitted with a sigmoid curve, allowing calculation of peak rewarming rate and corresponding body temperature. Maximum rewarming rates were twice as high in marmots as in echidnas (12.1±1.3 °C h⁻¹, n=10 cf. 6.2±1.2 °C h⁻¹, n=10). Peak rewarming rates were positively correlated with body temperature in echidnas, but negatively correlated in marmots.     

Kinetics and mechanism of the aquation of the trinuclear cation, [μ3-oxo-triaqua-hexakis(acetato)tris(iron(III))]in perchloric acid media

The aquation of the title complex cation in aqueous perchloric acid proceeded via two steps, both postulated to be the proton attack on the oxygen atom which binds the acetate ligand to the metal centre, followed by Fe-O bond cleavage. This was followed by rapid decomposition to produce aqueous iron(III) and acetate ions. The first-order rate constants for the first and second steps at 25 °C are: k₁ = (4.16 ± 0.58) × 10⁻² s⁻¹ and k₂ = (2.09 ± 0.42) × 10⁻³ s⁻¹, respectively, and their corresponding activation parameters are . The spontaneous hydrolysis rate constants for the first and second steps were also determined at 25 °C and ionic strength of 1 mol dm⁻³ and they are k₀ = (3.10 ± 0.82) × 10⁻³ s⁻¹ and , respectively. The corresponding activation parameters are .     

Protonation and hydrogen bonding of Ca2+ site residues in the E2P phosphoenzyme intermediate of sarcoplasmic reticulum Ca2+-ATPase studied by a combination of infrared spectroscopy and electrostatic calculations

Protonation of the Ca²⁺ ligands of the SR Ca²⁺-ATPase (SERCA1a) was studied by a combination of rapid scan FTIR spectroscopy and electrostatic calculations. With FTIR spectroscopy, we investigated the pH dependence of CO bands of the Ca²⁺-free phosphoenzyme (E2P) and obtained direct experimental evidence for the protonation of carboxyl groups upon Ca²⁺ release. At least three of the infrared signals from protonated carboxyl groups of E2P are pH dependent with pK_a values near 8.3: a band at 1758 cm⁻¹ characteristic of nonhydrogen-bonded carbonyl groups, a shoulder at 1720 cm⁻¹, and part of a band at 1710 cm⁻¹, both characteristic of hydrogen-bonded carbonyl groups. The bands are thus assigned to H⁺ binding residues, some of which are involved in H⁺ countertransport. At pH 9, bands at 1743 and 1710 cm⁻¹ remain which we do not attribute to Ca²⁺/H⁺ exchange. We also obtained evidence for a pH-dependent conformational change in β-sheet or turn structures of the ATPase. With MCCE on the E2P analog E2(), we assigned infrared bands to specific residues and analyzed whether or not the carbonyl groups of the acidic Ca²⁺ ligands are hydrogen bonded. The carbonyl groups of Glu⁷⁷¹, Asp⁸⁰⁰, and Glu⁹⁰⁸ were found to be hydrogen bonded and will thus contribute to the lower wave number bands. The carbonyl group of some side-chain conformations of Asp⁸⁰⁰ is left without a hydrogen-bonding partner; they will therefore contribute to the higher wave number band.     

The naturally split Npu DnaE intein exhibits an extraordinarily high rate in the protein trans-splicing reaction

We have studied the naturally split α subunit of the DNA polymerase III (DnaE) intein from Nostoc punctiforme PCC73102 (Npu) using purified proteins and determined an apparent first-order rate constant of (1.1±0.2)×10^-2 s⁻¹ at 37 °C. This represents the highest rate reported for the protein trans-splicing reaction so far (t_1/2 of ∼ 60 s). Furthermore, the reaction was very robust and high-yielding with respect to different extein sequences, temperatures from 6 to 37 °C, and the presence of up to 6 M urea. Given these outstanding properties, the Npu DnaE intein appears to be the intein of choice for many applications in protein and cellular chemistry.     

Enhanced production of recombinant streptokinase in Escherichia coli using fed-batch culture

Fed-batch culture strategy is often used for increasing production of heterologous recombinant proteins in Escherichia coli. This study was initiated to investigate the effects of dissolved oxygen concentration (DOC), complex nitrogen sources and pH control agents on cell growth and intracellular expression of streptokinase (SK) in recombinant E. coli BL21(DE3). Increase in DOC set point from 30% to 50% did not affect SK expression in batch culture where as similar increase in fed-batch cultivation led to a significant improvement in SK expression (from 188 to 720 mg l⁻¹). This increase in SK could be correlated with increase in plasmid segregational stability. Supplementation of production medium with yeast extract and tryptone and replacement of liquid ammonia with NaOH as pH control agent further enhanced SK expression without affecting cell growth. Overall, SK concentration of 1120 mg l⁻¹ representing 14-fold increase in SK production on process scale-up from flask to bioreactor scale fed-batch culture is the highest reported concentration of SK to date.     

Horizontal or vertical photobioreactors? How to improve microalgae photosynthetic efficiency

The productivity of a vertical outdoor photobioreactor was quantitatively assessed and compared to a horizontal reactor. Daily light cycles in southern Spain were simulated and applied to grow the microalgae Chlorella sorokiniana in a flat panel photobioreactor.The maximal irradiance around noon differs from 400 μmol photons m⁻² s⁻¹ in the vertical position to 1800 μmol photons m⁻² s⁻¹ in the horizontal position. The highest volumetric productivity was achieved in the simulated horizontal position, 4 g kg culture⁻¹ d⁻¹. The highest photosynthetic efficiency was found for the vertical simulation, 1.3 g of biomass produced per mol of PAR photons supplied, which compares favorably to the horizontal position (0.85 g mol⁻¹) and to the theoretical maximal yield (1.8 g mol⁻¹). These results prove that productivity per unit of ground area could be greatly enhanced by placing the photobioreactors vertically.     

Effects of agronomic application of olive mill wastewater in a field of olive trees on carbohydrate profiles, chlorophyll a fluorescence and mineral nutrient content

Olive mill wastewater (OMW) management is a serious environmental issue for the Mediterranean area where there is the most production of olive oil. OMW contains a high organic load, substantial amounts of plant nutrients but also several compounds with recognized toxicity towards living organisms. Moreover, OMW may represent a low cost source of water. We studied the influence of irrigation with OMW (amounts applied: 30, 60, 100 and 150 m³ h⁻¹) in a field of olive trees on root colonization, photosynthesis, chlorophyll fluorescence, leaf nutrient concentration and soluble carbohydrate. The soil fatty acid methyl ester (FAME) 16:1ω5 was used to quantify biomass of arbuscular mycorrhizal (AM) fungi and the root FAME 16:1ω5 analysis was used as index for the development of colonization in the roots. Agronomic application of OMW decreased significantly the abundance of the soil FAME 16:1ω5 and the root FAME 16:1ω5 in the soil amended with 60, 100 and 150 m³ ha⁻¹ OMW. Decreased root FAME 16:1ω5 due to OMW amendment was associated with a significant reduction of tissue nutrient concentrations in the olive trees. The highest application of OMW to the soil reduced significantly the olive trees uptake of N, P, K, Ca, Mg, Fe, Cu, Mn and Zn. Land spreading of OMW increased concentration of soluble carbohydrate in the olive leaves, mostly due to decreased sink demand for carbon by the root. In the olive trees amended with 150 m³ ha⁻¹ OMW, net CO₂ uptake rate (A), quantum yield of photosystem II electron transport (Φ_PSII), maximal photochemical efficiency of photosystem II (Fv/Fm), photochemical quenching (q_p) and the electron transport rate (ETR) were significantly depressed, whereas non-photochemical quenching (NPQ) was found to increase. Taken with data from experiments in field conditions, our results suggest that agronomic application of OMW alters the functioning of arbuscular mycorrhizas and can even disrupt the relationship between AM fungi and olive trees.     

Cultivation of microalgae for oil production with a cultivation strategy of urea limitation

The microalgae, Chlorella sp., were cultivated in various culture modes to assess biomass and lipid productivity in this study. In the batch mode, the biomass concentrations and lipid content of Chlorella sp. cultivated in a medium containing 0.025–0.200 g L⁻¹ urea were 0.464–2.027 g L⁻¹ and 0.661–0.326 g g⁻¹, respectively. The maximum lipid productivity of 0.124 g d⁻¹ L⁻¹ occurred in a medium containing 0.100 g L⁻¹ urea. In the fed-batch cultivation, the highest lipid content was obtained by feeding 0.025 g L⁻¹ of urea during the stationary phase, but the lipid productivity was not significantly increased. However, a semi-continuous process was carried out by harvesting the culture and renewing urea at 0.025 g L⁻¹ each time when the cultivation achieved the early stationary phase. The maximum lipid productivity of 0.139 g d⁻¹ L⁻¹ in the semi-continuous culture was highest in comparison with those in the batch and fed-batch cultivations.     

In silico optimization and low structured kinetic model of poly[(R)-3-hydroxybutyrate] synthesis by Cupriavidus necator DSM 545 by fed-batch cultivation on glycerol

Glycerol was utilized by Cupriavidus necator DSM 545 for production of poly-3-hydroxybutyrate (PHB) in fed-batch fermentation. Maximal specific growth rates (0.12 and 0.3 h⁻¹) and maximal specific non-growth PHB production rate (0.16 g g⁻¹ h⁻¹) were determined from two experiments (inocula from exponential and stationary phase). Saturation constants for nitrogen (0.107 and 0.016 g L⁻¹), glycerol (0.05 g L⁻¹), non-growth related PHB synthesis (0.011 g L⁻¹) and nitrogen/PHB related inhibition constant (0.405 g L⁻¹), were estimated. Five relations for specific growth rate were tested using mathematical models. In silico performed optimization procedures (varied glycerol/nitrogen ratio and feeding) has resulted in a PHB content of 70.9%, shorter cultivation time (23 h) and better PHB yield (0.347 g g⁻¹). Initial concentration of biomass 16.8 g L⁻¹ and glycerol concentration in broth between 3 and 5 g L⁻¹ were decisive factors for increasing of productivity.     

Metabolic and energetic aspects of biohydrogen production of Clostridium tyrobutyricum: The effects of hydraulic retention time and peptone addition

This study evaluates the microbial metabolism and energy demand in fermentative biohydrogen production using Clostridium tyrobutyricum FYa102 at different hydraulic retention times (HRT) over a period of 1-18 h. The hydrogen yield shows a positive correlation with the butyrate yield, the B/A ratio, and the Y_H2/2(Y_HAc+Y_HBu) ratio, but a negative correlation with the lactate yield. A decrease in HRT, which is accompanied by an increased biomass growth, tends to decrease the B/A ratio, due presumably to a higher energy demand for microbial growth. The production of lactate at a low HRT, however, may involve an unfavorable change in e⁻ equiv distribution to result in a reduced hydrogen production. Finally, the relatively high hydrogen yields observed in the bioreactor with the peptone addition may be ascribed to the utilization of peptone as an additional energy and/or amino-acid source, thus reducing the glucose demand for biomass growth during the hydrogen production process.     

Influence of ammonium sulphate feeding time on fed-batch Arthrospira (Spirulina) platensis cultivation and biomass composition with and without pH control

Previous work demonstrated that a mixture of NH₄Cl and KNO₃ as nitrogen source was beneficial to fed-batch Arthrospira (Spirulina) platensis cultivation, in terms of either lower costs or higher cell concentration. On the basis of those results, this study focused on the use of a cheaper nitrogen source mixture, namely (NH₄)₂SO₄ plus NaNO₃, varying the ammonium feeding time (T = 7-15 days), either controlling the pH by CO₂ addition or not. A. platensis was cultivated in mini-tanks at 30 °C, 156 μmol photons m⁻² s⁻¹, and starting cell concentration of 400 mg L⁻¹, on a modified Schlösser medium. T = 13 days under pH control were selected as optimum conditions, ensuring the best results in terms of biomass production (maximum cell concentration of 2911 mg L⁻¹, cell productivity of 179 mg L⁻¹ d⁻¹ and specific growth rate of 0.77 d⁻¹) and satisfactory protein and lipid contents (around 30% each).     

PS II model based analysis of transient fluorescence yield measured on whole leaves of Arabidopsis thaliana after excitation with light flashes of different energies

Our recently presented PS II model (Belyaeva et al., 2008) was improved in order to permit a consistent simulation of Single Flash Induced Transient Fluorescence Yield (SFITFY) traces that were earlier measured by Steffen et al. (2005) on whole leaves of Arabidopsis (A.) thaliana at four different energies of the actinic flash. As the essential modification, the shape of the actinic flash was explicitly taken into account assuming that an exponentially decaying rate simulates the time dependent excitation of PS II by the 10 ns actinic flash. The maximum amplitude of this excitation exceeds that of the measuring light by 9 orders of magnitude. A very good fit of the SFITFY data was achieved in the time domain from 100 ns to 10 s for all actinic flash energies (the maximum energy of 7.5 × 10¹⁶ photons/(cm² flash) is set to 100%, the relative energies of weaker actinic flashes were of ∼8%, 4%, ∼1%). Our model allows the calculation and visualization of the transient PS II redox state populations ranging from the dark adapted state, via excitation energy and electron transfer steps induced by pulse excitation, followed by final relaxation into the stationary state eventually attained under the measuring light. It turned out that the rate constants of electron transfer steps are invariant to intensity of the actinic laser flash. In marked contrast, an increase of the actinic flash energy by more than two orders of magnitude from 5.4 × 10¹⁴ photons/(cm² flash) to 7.5 × 10¹⁶ photons/(cm² flash), leads to an increase of the extent of fluorescence quenching due to carotenoid triplet (³Car) formation by a factor of 14 and of the recombination reaction between reduced primary pheophytin (Phe⁻) and P680⁺ by a factor of 3 while the heat dissipation in the antenna complex remains virtually constant.The modified PS II model offers new opportunities to compare electron transfer and dissipative parameters for different species (e.g. for the green algae and the higher plant) under varying illumination conditions.     

Pullulan-sodium alginate based edible films: Rheological properties of film forming solutions

Rheological properties of pullulan, sodium alginate and blend solutions were studied at 20 °C, using steady shear and dynamic oscillatory measurements. The intrinsic viscosity of pure sodium alginate solution was 7.340 dl/g, which was much higher than that of pure pullulan (0.436 dl/g). Pure pullulan solution showed Newtonian behavior between 0.1 and 100 s⁻¹ shear rate range. However, increasing sodium alginate concentration in pullulan-alginate blend solution led to a shear-thinning behavior. The effect of temperature on viscosities of all solutions was well-described by Arrhenius equation. Results from dynamical frequency sweep showed that pure sodium alginate and blend solutions at 4% (w/w) polymer concentration were viscoelastic liquid, whereas the pure pullulan exhibited Newtonian behavior. The mechanical properties of pure sodium alginate and pullulan-alginate mixture were analyzed using the generalized Maxwell model and their relaxation spectra were determined. Correlation between dynamic and steady-shear viscosity was analyzed with the empirical Cox-Merz rule.     

Proton transport coupled ATP synthesis by the purified yeast H-ATP synthase in proteoliposomes

The H⁺/ATP synthase from yeast mitochondria, MF₀F₁, was purified and reconstituted into liposomes prepared from phosphatidylcholine and phosphatidic acid. Analysis by mass spectrometry revealed the presence of all subunits of the yeast enzyme with the exception of the K-subunit. The MF₀F₁ liposomes were energized by acid-base transitions (ΔpH) and a K⁺/valinomycin diffusion potential (Δφ). ATP synthesis was completely abolished by the addition of uncouplers as well as by the inhibitor oligomycin. The rate of ATP synthesis was optimized as a function of various parameters and reached a maximum value (turnover number) of 120 s^− 1 at a transmembrane pH difference of 3.2 units (at pH_in = 4.8 and pH_out = 8.0) and a Δφ of 133 mV (Nernst potential). Functional studies showed that the monomeric MF₀F₁ was fully active in ATP synthesis. The turnover increased in a sigmoidal way with increasing internal and decreasing external proton concentration. The dependence of the turnover on the phosphate concentration and the dependence of K_M on pH_out indicated that the substrate for ATP synthesis is the monoanionic phosphate species H₂PO₄⁻.     

Localization-controlled specificity of FAD:threonine flavin transferases in Klebsiella pneumoniae and its implications for the mechanism of Na-translocating NADH:quinone oxidoreductase

The Klebsiella pneumoniae genome contains genes for two putative flavin transferase enzymes (ApbE1 and ApbE2) that add FMN to protein Thr residues. ApbE1, but not ApbE2, has a periplasm-addressing signal sequence. The genome also contains genes for three target proteins with the Dxx(s/t)gAT flavinylation motif: two subunits of Na⁺-translocating NADH:quinone oxidoreductase (Na⁺-NQR), and a 99.5 kDa protein, KPK_2907, with a previously unknown function. We show here that KPK_2907 is an active cytoplasmically-localized fumarate reductase. K. pneumoniae cells with an inactivated kpk_2907 gene lack cytoplasmic fumarate reductase activity, while retaining this activity in the membrane fraction. Complementation of the mutant strain with a kpk_2907-containing plasmid resulted in a complete recovery of cytoplasmic fumarate reductase activity. KPK_2907 produced in Escherichia coli cells contains 1 mol/mol each of covalently bound FMN, noncovalently bound FMN and noncovalently bound FAD. Lesion in the ApbE1 gene in K. pneumoniae resulted in inactive Na⁺-NQR, but cytoplasmic fumarate reductase activity remained unchanged. On the contrary, lesion in the ApbE2 gene abolished the fumarate reductase but not the Na⁺-NQR activity. Both activities could be restored by transformation of the ApbE1- or ApbE2-deficient K. pneumoniae strains with plasmids containing the Vibrio cholerae apbE gene with or without the periplasm-directing signal sequence, respectively. Our data thus indicate that ApbE1 and ApbE2 bind FMN to Na⁺-NQR and fumarate reductase, respectively, and that, contrary to the presently accepted view, the FMN residues are on the periplasmic side of Na⁺-NQR. A new, “electron loop” mechanism is proposed for Na⁺-NQR, involving an electroneutral Na⁺/electron symport. This article is part of a Special Issue entitled: 18th European Bioenergetic Conference.     

3-Phenyllactic acid production by substrate feeding and pH-control in fed-batch fermentation of Lactobacillus sp. SK007

3-Phenyllactic acid (PLA), which is produced by some strains of lactic acid bacteria (LAB), is a known antimicrobial agent with a broad spectrum. Batch and fed-batch fermentation by the strain Lactobacillus sp. SK007 for PLA production have been reported. With batch fermentation without pH-control, PLA production yield was 2.42 g L⁻¹. When fed-batch fermentation by Lactobacillus sp. SK007 was conducted in 3 L initial volume with pH-control at 6.0 and intermittent feeding, which was developed after fermentation for 12 h and every 2 h with 120 mL 100 g L⁻¹ PPA phenylpyruvic acid (PPA) and 50 mL 500 g L⁻¹ glucose each time, PLA production yield reached 17.38 g L⁻¹. The final conversion ratio of PPA to PLA was 51.1%, and the PLA production rate was 0.241 g L⁻¹ h⁻¹. This indicated that PPA was the ideal substrate for PLA fermentation production, and fed-batch fermentation with intermittent PPA feeding and pH-control was an effective approach to improve PLA production yield.     

Actinoplanes utahensis ZJB-08196 fed-batch fermentation at elevated osmolality for enhancing acarbose production

Acarbose, a potent α-glucosidase inhibitor, is as an oral anti-diabetic drug for treatment of the type two, noninsulin-dependent diabetes. Actinoplanes utahensis ZJB-08196, an osmosis-resistant actinomycete, had a broad osmolality optimum between 309 mOsm kg⁻¹ and 719 mOsm kg⁻¹. Utilizing this unique feature, an fed-batch culture process under preferential osmolality was constructed through intermittently feeding broths with feed medium consisting of 14.0 g l⁻¹ maltose, 6.0 g l⁻¹ glucose and 9.0 g l⁻¹ soybean meal, at 48 h, 72 h, 96 h and 120 h. This intermittent fed-batch culture produced a peak acarbose titer of 4878 mg l⁻¹, increased by 15.9% over the batch culture.