Simultaneous mutation scanning and genotyping by high-resolution DNA melting analysis

This protocol permits the simultaneous mutation scanning and genotyping of PCR products by high-resolution DNA melting analysis. This is achieved using asymmetric PCR performed in the presence of a saturating fluorescent DNA dye and unlabeled oligonucleotide probes. Fluorescent melting curves of both PCR amplicons and amplicon-probe duplexes are analyzed. The shape of the PCR amplicon melting transition reveals the presence of heterozygotes, whereas specific genotyping is enabled by melting of the unlabeled probe-amplicon duplex. Unbiased hierarchal clustering of melting transitions automatically groups different sequence variants; this allows common variants to be easily recognized and genotyped. This technique may be used in both laboratory research and clinical settings to study single-nucleotide polymorphisms and small insertions and deletions, and to diagnose associated genetic disorders. High-resolution melting analysis accomplishes simultaneous gene scanning and mutation genotyping in a fraction of the time required when using traditional methods, while maintaining a closed-tube environment. The PCR requires <30 min (capillaries) or 1.5 h (96- or 384-well plates) and melting acquisition takes 1-2 min per capillary or 5 min per plate.     

Application of high-resolution DNA melting for genotyping in lepidopteran non-model species: Ostrinia furnacalis (Crambidae)

Development of an ideal marker system facilitates a better understanding of the genetic diversity in lepidopteran non-model organisms, which have abundant species, but relatively limited genomic resources. Single nucleotide polymorphisms (SNPs) discovered within single-copy genes have proved to be desired markers, but SNP genotyping by current techniques remain laborious and expensive. High resolution melting (HRM) curve analysis represents a simple, rapid and inexpensive genotyping method that is primarily confined to clinical and diagnostic studies. In this study, we evaluated the potential of HRM analysis for SNP genotyping in the lepidopteran non-model species Ostrinia furnacalis (Crambidae). Small amplicon and unlabeled probe assays were developed for the SNPs, which were identified in 30 females of O. furnacalis from 3 different populations by our direct sequencing. Both assays were then applied to genotype 90 unknown female DNA by prior mixing with known wild-type DNA. The genotyping results were compared with those that were obtained using bi-directional sequencing analysis. Our results demonstrated the efficiency and reliability of the HRM assays. HRM has the potential to provide simple, cost-effective genotyping assays and facilitates genotyping studies in any non-model lepidopteran species of interest.     

Rapid genotyping of APOA5 -1131T>C polymorphism using high resolution melting analysis with unlabeled probes

The APOA5 -1131 T/C polymorphism (rs662799) exhibits a very strong association with elevated TG levels in different racial groups. High resolution melting (HRM) analysis with the use of unlabeled probes has shown to be a convenient and reliable tool to genotyping, but not yet been used for detecting rs662799 polymorphism. We applied the unlabeled probe HRM analysis and direct DNA sequencing to assay the -1131T>C SNP in 130 cases DNA samples blindly. This HRM analysis can be completed in <3 min for each sample. The two melting peaks were displayed at 66.1±0.4°C for CC homozygote and 68.7±0.2°C for TT homozygote; TC heterozygote showed the both melting peaks. The genotyping results by HRM method were completely concordant with direct DNA sequencing. The distribution of CC, TC, and TT genotypes for the -1131T>C SNP was 9.2, 49.2, and 41.5%, respectively. This assay was sensitive enough to detect C allele down to 20% and 10% for T allele. The limit of detection for C and T allele was 6.2 and 2.5 ng/μL DNA, respectively. The developed unlabeled probe HRM method provides an alternative mean to detect ApoA5 -1131T>C SNP rapidly and accurately.     

高分辨率熔解曲线法的非标记探针基因分型技术

PCR反应中利用荧光检测技术对已知位点进行基因分型时常采用荧光标记的寡核苷酸做探针。近年来新兴起的高分辨率熔解曲线技术可以采用非标记的探针对已知位点的SNP(single nucleotide polymorphism)或突变进行基因分型研究。采用非标记探针法对已知位点的基因分型研究具有廉价、快速、简便等特点,因此被大量应用在和疾病、形状等相关的一些多肽位点的研究中。本文较详细地介绍该技术的基本原理和实验中的注意事项。     

High resolution melting analysis for gene scanning

High resolution melting is a new method of genotyping and variant scanning that can be seamlessly appended to PCR amplification. Limitations of genotyping by amplicon melting can be addressed by unlabeled probe or snapback primer analysis, all performed without labeled probes. High resolution melting can also be used to scan for rare sequence variants in large genes with multiple exons and is the focus of this article. With the simple addition of a heteroduplex-detecting dye before PCR, high resolution melting is performed without any additions, processing or separation steps. Heterozygous variants are identified by atypical melting curves of a different shape compared to wild-type homozygotes. Homozygous or hemizygous variants are detected by prior mixing with wild-type DNA. Design, optimization, and performance considerations for high resolution scanning assays are presented for rapid turnaround of gene scanning. Design concerns include primer selection and predicting melting profiles in silico. Optimization includes temperature gradient selection of the annealing temperature, random population screening for common variants, and batch preparation of primer plates with robotically deposited and dried primer pairs. Performance includes rapid DNA preparation, PCR, and scanning by high resolution melting that require, in total, only 3 h when no variants are present. When variants are detected, they can be identified in an additional 3 h by rapid cycle sequencing and capillary electrophoresis. For each step in the protocol, a general overview of principles is provided, followed by an in depth analysis of one example, scanning of CYBB, the gene that is mutated in X-linked chronic granulomatous disease.     

Single nucleotide polymorphism genotyping using allele-specific PCR and fluorescence melting curves

We present a PCR method for identification of single nucleotide polymorphisms (SNPs), using allele-specific primers designed for selective amplification of each allele. Matching the SNP at the 3' end of the forward or reverse primer, and additionally incorporating a 3' mismatch to prevent amplification of the incorrect allele, results in selectivity of the allele-specific primers. DNA melting analysis with fluorescent SYBR Green affords detection of the PCR products. By incorporating a GC-rich sequence into one of the two allele-specific primers to increase the melting temperature, both alleles can be measured simultaneously at their respective melting temperatures. Applying the DNA melting analysis to SNPs in ApoE and ABCA1 yielded results identical to those obtained with other genotyping methods. This provides a cost-effective, high-throughput method for amplification and scoring of SNPs.     

Biochip development for determining Y-haplogroups that occur in Russian populations

A biochip has been developd that enables one to determine Y-chromosome haplogroups C, DE, G, H, I, J, L, N, O, and R in the DNA sample. SNPs M130, M145, P257, M69, U179, M304, M185, M231, M175, P224 were selected as haplogroup markers, correspondingly. The genotyping included two-round PCR with fluorescent labeling of the product followed by hybridization with immobilized probes on the biochip. An analysis of the ratios of fluorescent signals for immobilized wild-type probe-group specific probe pairs for each of the chosen polymorphic markers showed a high accuracy Y-haplogroup genotyping using the biochip. The reliability of genotyping was confirmed by direct sequencing.     

Multiplex Amplicon Genotyping by High-Resolution Melting

High-resolution amplicon melting is a simple method for genotyping that uses only generic PCR primers and a saturating DNA dye. Multiplex amplicon genotyping has previously been reported in a single color, but two instruments were required: a carousel-based rapid cycler and a high-resolution melting instrument for capillaries. Manual transfer of capillaries between instruments and sequential melting of each capillary at 0.1°C/s seriously limited the throughput. In this report, a single instrument that combines rapid-cycle real-time PCR with high-resolution melting [LightScanner-32 (LS-32), Idaho Technology, Salt Lake City, UT] was used for multiplex amplicon genotyping. The four most common mutations associated with thrombophilia, F5 (factor V Leiden 1691G>A), F2 (prothrombin 20210G>A), and methylenetetrahydrofolate reductase (MTHFR; 1298A>C and 677C>T) were genotyped in a single homogeneous assay with internal controls to adjust for minor chemistry and instrument variation. Forty temperature cycles required 9.2 min, and each capillary required 2.2 min by melting at 0.3°C/s, 3× the prior rate. Sample volume was reduced from 20 μl to 10 μl. In a blinded study of 109 samples (436 genotypes), complete concordance with standard assays was obtained. In addition, the rare variant MTHFR 1317T>C was genotyped correctly when present. The LS-32 simplifies more complex high-resolution melting assays by reducing hands-on manipulation, total time of analysis, and reagent cost while maintaining the resolution necessary for multiplex amplicon genotyping.     

PCR amplification on magnetic nanoparticles: application for high-throughput single nucleotide polymorphism genotyping

A novel approach for the genotyping of single nucleotide polymorphisms (SNPs) based on solidphase PCR on magnetic nanoparticles (MNPs) is described. PCR products were amplified directly on MNPs. The genotypes of a given SNP were differentiated by hybridization with a pair of allele-specific probes labeled with dual-color fluorescence (Cy3, Cy5). The results were analyzed by scanning the microarray printed with the denatured fluorescent probes on an unmodified glass slide. Electrophoresis analysis indicated that PCR could proceed successfully when MNPs-bound primers were used. Furthermore, nine different samples were genotyped and their fluorescent signals were quantified. Genotyping results showed that three genotypes for the locus were very easily discriminated. The fluorescent ratios (match probe:mismatch probe signal) of homozygous samples were over 9.3, whereas heterozygous samples had ratios near 1.0. Without any purification and concentration of PCR products, this new MNP-PCR based genotyping assay potentially provides a rapid, labor-saving method for genotyping of a large number of individuals.     

Automated DNA Extraction,Quantification, Dilution,and PCR Preparation for Genotyping by High-Resolution Melting

Genotyping by high-resolution amplicon melting uses only two PCR primers per locus and a generic, saturating DNA dye that detects heteroduplexes as well as homoduplexes. Heterozygous genotypes have a characteristic melting curve shape and a broader width than homozygous genotypes, which are usually differentiated by their melting temperature (T_m). The H63D mutation, associated with hemochromatosis, is a single nucleotide polymorphism, which is impossible to genotype based on T_m, as the homozygous WT and mutant amplicons melt at the same temperature. To distinguish such homozygous variants, WT DNA can be added to controls and unknown samples to create artificial heterozygotes with all genotypes distinguished by quantitative heteroduplex analysis. By automating DNA extraction, quantification, and PCR preparation, a hands-off integrated solution for genotyping is possible. A custom Biomek® NX robot with an onboard spectrophotometer and custom programming was used to extract DNA from whole blood, dilute the DNA to appropriate concentrations, and add the sample DNA to preprepared PCR plates. Agencourt® Genfind™ v.2 chemistry was used for DNA extraction. PCR was performed on a plate thermocycler, high-resolution melting data collected on a LightScanner-96, followed by analysis and automatic genotyping using custom software. In a blinded study of 42 H63D samples, 41 of the 42 sample genotypes were concordant with dual hybridization probe genotyping. The incorrectly assigned genotype was a heterozygote that appeared to be a homozygous mutant as a result of a low sample DNA concentration. Automated DNA extraction from whole blood with quantification, dilution, and PCR preparation was demonstrated using quantitative heteroduplex analysis. Accuracy is critically dependent on DNA quantification.     

High-resolution melting molecular signatures for rapid identification of human papillomavirus genotypes

Background

Genotyping of human papillomarvirus (HPV) is crucial for patient management in a clinical setting. This study accesses the combined use of broad-range real-time PCR and high-resolution melting (HRM) analysis for rapid identification of HPV genotypes.

Methods

Genomic DNA sequences of 8 high-risk genotypes (HPV16/18/39/45/52/56/58/68) were subject to bioinformatic analysis to select for appropriate PCR amplicon. Asymmetric broad-range real-time PCR in the presence of HRM dye and two unlabeled probes specific to HPV16 and 18 was employed to generate HRM molecular signatures for HPV genotyping. The method was validated via assessment of 119 clinical HPV isolates.

Results

A DNA fragment within the L1 region was selected as the PCR amplicon ranging from 215–221 bp for different HPV genotypes. Each genotype displayed a distinct HRM molecular signature with minimal inter-assay variability. According to the HRM molecular signatures, HPV genotypes can be determined with one PCR within 3 h from the time of viral DNA isolation. In the validation assay, a 91% accuracy rate was achieved when the genotypes were in the database. Concomitantly, the HRM molecular signatures for additional 6 low-risk genotypes were established.

Conclusions

This assay provides a novel approach for HPV genotyping in a rapid and cost-effective manner.     

The Use of EGFR Exon 19 and 21 Unlabeled DNA Probes to Screen for Activating Mutations in Non–Small Cell Lung Cancer

Activating mutations in epidermal growth factor receptor-1 (EGFR) are found in 10–15% of Caucasian patients with non–small cell lung carcinoma (NSCLC). Approximately 90% of the mutations are deletions of several amino acids in exon 19 or point mutations in exon 21. Some studies suggest that these mutations identify patients that might benefit from targeted EGFR inhibitor therapy. DNA melting analysis of polymerase chain reaction products can screen for these mutations to identify this patient population. However, amplicon DNA melting analysis, although easily capable of detecting heterozygous mutations by heterodimer formation, becomes more difficult if mutations are homozygous or if the mutant allele is selectively amplified over wild type. Amplification of EGFR is common in NSCLC and this could compromise mutation detection by amplicon melting analysis. To overcome this potential limitation, we developed unlabeled, single-stranded DNA probes, complimentary to EGFR exon 19 and exon 21 where the common activating mutations occur. The unlabeled probes are incorporated into a standard polymerase chain reaction during the amplification of EGFR exons 19 and 21. The probe melting peak is easily distinguished from the amplicon melting peak, and probe melting is altered if mutations are present. This allows for easy identification of activating mutations even in homozygous or amplified states and is useful in the screening of NSCLC for the common EGFR activating mutations.     

Estimation of relative allele frequencies of single-nucleotide polymorphisms in different populations by microarray hybridization of pooled DNA

Single-nucleotide polymorphisms (SNPs) are considered useful polymorphic markers for genetic studies of polygenic traits. A new practical approach to high-throughput genotyping of SNPs in a large number of individuals is needed in association study and other studies on relationships between genes and diseases. We have developed an accurate and high-throughput method for determining the allele frequencies by pooling the DNA samples and applying a DNA microarray hybridization analysis. In this method, the combination of the microarray, DNA pooling, probe pair hybridization, and fluorescent ratio analysis solves the dual problems of parallel multiple sample analysis, and parallel multiplex SNP genotyping for association study. Multiple DNA samples are immobilized on a slide and a single hybridization is performed with a pool of allele-specific oligonucleotide probes. The results of this study show that hybridization of microarray from pooled DNA samples can accurately obtain estimates of absolute allele frequencies in a sample pool. This method can also be used to identify differences in allele frequencies in distinct populations. It is amenable to automation and is suitable for immediate utilization for high-throughput genotyping of SNP.     

High-throughput polymorphism screening and genotyping with high-density oligonucleotide arrays

A highly reliable and efficient technology has been developed for high-throughput DNA polymorphism screening and large-scale genotyping. Photolithographic synthesis has been used to generate miniaturized, high-density oligonucleotide arrays. Dedicated instrumentation and software have been developed for array hybridization, fluorescent detection, and data acquisition and analysis. Specific oligonucleotide probe arrays have been designed to rapidly screen human STSs, known genes and full-length cDNAs. This has led to the identification of several thousand biallelic single-nucleotide polymorphisms (SNPs). Meanwhile, a rapid and robust method has been developed for genotyping these SNPs using oligonucleotide arrays. Each allele of an SNP marker is represented on the array by a set of perfect match and mismatch probes. Prototype genotyping chips have been produced to detect 400, 600 and 3000 of these SNPs. Based on the preliminary results, using oligonucleotide arrays to genotype several thousand polymorphic loci simultaneously appears feasible.     

Allele-specific extension allows base-pair neutral homozygotes to be discriminated by high-resolution melting of small amplicons

Not all single-nucleotide polymorphisms (SNPs) can be determined using high-resolution melting (HRM) of small amplicons, especially class 3 and 4 SNPs. This is due mainly to the small shift in the melting temperature (Tm) between two types of homozygote. Choosing rs1869458 (a class 4 SNP) as a sample, we developed a modified small amplicon HRM assay. An allele-specific extension (ASE) primer, which ended at an SNP site and matched only one of the alleles, was added to the reaction as well as additional thermal steps for ASE. Following asymmetric polymerase chain reaction and melting curve analysis, heterozygotes were easily identified. Two types of homozygote were also distinguishable, indicating that extension primers 11 to 13 bases in length worked efficiently in an allele-specific way. Modification of the limiting amplification primer with locked nucleic acid increased the Tm difference between extension and amplification peaks and facilitated subsequent genotyping. In addition, 194 human genomic DNA samples were genotyped with the developed assay and by direct sequencing, with the different methods providing identical genotyping results. In conclusion, ASE-HRM is a simple, inexpensive, closed-tube genotyping method that can be used to examine all types of SNP.     

Melting curve analysis of SNPs (McSNP): a gel-free and inexpensive approach for SNP genotyping

High-throughput methods for assaying DNA variation require two important steps: (i) discriminating the variation and (ii) detecting the signal. In this report, we describe a novel SNP genotyping method that we refer to as melting curve analysis of SNPs (McSNP). McSNP combines a classic approach for discriminating alleles, restriction enzyme digestion, with a more recent method for detecting DNA fragments, melting curve analysis. Melting curve analysis is performed by slowly heating DNA fragments in the presence of the dsDNA-specific fluorescent dye SYBR Green I. As the sample is heated, fluorescence rapidly decreases when the melting temperature of a particular fragment is reached. We show that it is possible to determine the composition of simple mixtures of DNA fragments, such as those that result from restriction enzyme digestions of short PCR products. McSNP is well suited for high-throughput genotyping because 96 samples can be analyzed and automatically scored in 20 min. Our results clearly demonstrate that McSNP is a simple, inexpensive, and accurate means of genotyping SNP variation.     

Closed-tube genotyping of apolipoprotein E by isolated-probe PCR with multiple unlabeled probes and high-resolution DNA melting analysis

Isolated-probe PCR (IP-PCR) is a method that combines asymmetric PCR, unlabeled probes, and high-resolution DNA melting while maintaining a closed tube system. A double-stranded DNA (dsDNA) dye LCGreen I was used to detect the unlabeled probes. LCGreen I is also used to detect the 277-base pair PCR product peak as an internal amplification control. To accomplish this, IP-PCR separates the asymmetric PCR amplification step and the detection step of the unlabeled probes. This prevents the probes from interfering with the amplification of the DNA target. The samples are then melted using a high-resolution DNA melting instrument: the HR-1. The closed tube system virtually eliminates PCR product contamination or sample carryover The target apolipoprotein E (APOE) was chosen to test the IP-PCR technique. APOE contains two single nucleotide polymorphisms (SNPs) located 139 base pairs apart in a GC-rich region of the human genome. The results from this study show that the IP-PCR technique was able to determine the correct APOE genotype for each of the 101 samples. The IP-PCR technique should also be useful in detecting SNPs in other high-GC regions of the human genome.     

Identification of ryanodine receptor 1 single-nucleotide polymorphisms by high-resolution melting using the LightCycler 480 System

High-resolution melting (HRM) allows single-nucleotide polymorphism (SNP) detection/typing using inexpensive generic heteroduplex-detecting double-stranded DNA (dsDNA) binding dyes. Until recently HRM has been a post-PCR process. With the LightCycler 480 System, however, the entire mutation screening process, including post-PCR analysis, can be performed using a single instrument. HRM assays were developed to allow screening of the ryanodine receptor gene (RYR1) for potential mutations causing malignant hyperthermia (MH) and/or central core disease (CCD) using the LightCycler 480 System. The assays were validated using engineered plasmids and/or genomic DNA samples that are either homozygous wild type or heterozygous for one of three SNPs that lead to the RyR1 amino acid substitutions T4826I, H4833Y, and/or R4861H. The HRM analyses were conducted using two different heteroduplex-detecting dsDNA binding dyes: LightCycler 480 HRM dye and LCGreen Plus. Heterozygous samples for each of the HRM assays were readily distinguished from homozygous samples with both dyes. By using engineered plasmids, it was shown that even homozygous sequence variations can be identified by using either small amplicons or the addition of exogenous DNA after PCR. Thus, the LightCycler 480 System provides a novel, integrated, real-time PCR/HRM platform that allows high throughput, inexpensive SNP detection, and genotyping based on high-resolution amplicon melting.     

Quantitative heteroduplex analysis for single nucleotide polymorphism genotyping

High-resolution melting of polymerase chain reaction (PCR) products can detect heterozygous mutations and most homozygous mutations without electrophoretic or chromatographic separations. However, some homozygous single nucleotide polymorphism (SNPs) have melting curves identical to that of the wild-type, as predicted by nearest neighbor thermodynamic models. In these cases, if DNA of a known reference genotype is added to each unknown before PCR, quantitative heteroduplex analysis can differentiate heterozygous, homozygous, and wild-type genotypes if the fraction of reference DNA is chosen carefully. Theoretical calculations suggest that melting curve separation is proportional to heteroduplex content difference and that the addition of reference homozygous DNA at one seventh of total DNA results in the best discrimination between the three genotypes of biallelic SNPs. This theory was verified experimentally by quantitative analysis of both high-resolution melting and temperature-gradient capillary electrophoresis data. Reference genotype proportions other than one seventh of total DNA were suboptimal and failed to distinguish some genotypes. Optimal mixing before PCR followed by high-resolution melting analysis permits genotyping of all SNPs with a single closed-tube analysis.     

High‐resolution melt analysis without DNA extraction affords rapid genotype resolution and species identification

Extracting and sequencing DNA from specimens can impose major time and monetary costs to studies requiring genotyping, or identification to species, of large numbers of individuals. As such, so‐called direct PCR methods have been developed enabling significant savings at the DNA extraction step. Similarly, real‐time quantitative PCR techniques (qPCR) offer very cost‐effective alternatives to sequencing. High‐resolution melt analysis (HRM) is a qPCR method that incorporates an intercalating dye into a double‐stranded PCR amplicon. The dye fluoresces brightly, but only when it is bound. Thus, after PCR, raising the temperature of the amplicon while measuring the fluorescence of the reaction results in the generation of a sequence‐specific melt curve, allowing discrimination of genotypes. Methods combining HRM (or other qPCR methods) and direct PCR have not previously been reported, most likely due to concerns that any tissue in the reaction tube would interfere with detection of the fluorescent signal. Here, we couple direct PCR with HRM and, by way of three examples, demonstrate a very quick and cost‐effective method for genotyping large numbers of specimens, using Rotor‐Gene HRM instruments (QIAGEN). In contrast to the heated‐block design of most qPCR/HRM instruments, the Rotor‐Gene's centrifugal rotor and air‐based temperature‐regulation system facilitate our method by depositing tissues away from the pathway of the machine's fluorescence detection optics.