Purification and characterization of an alcohol dehydrogenase from 1,2-propanediol-grownDesulfovibrio strain HDv

The sulfate-reducing bacterimDesulfovibrio strain HDv (DSM 6830) grew faster on (S)- and on (R, S)-1,2-propanediol (μ_max 0.053 h⁻) than on (R)-propanediol (0.017 h⁻¹) and ethanol (0.027 h⁻¹). From (R, S)-1,2-propanediol-grown cells, an alcohol dehydrogenase was purified. The enzyme was oxygen-labile, NAD-dependent, and decameric; the subunit mol. mass was 48 kDa. The N-terminal amino acid sequence indicated similarity to alcohol dehydrogenases belonging to family III of NAD-dependent alcohol dehydrogenases, the first 21 N-terminal amino acids being identical to those of theDesulfovibrio gigas alcohol dehydrogenase. Best substrates were ethanol and propanol (K _m of 0.48 and 0.33 mM, respectively). (R, S)-1,2-Propanediol was a relatively poor substrate for the enzyme, but activities in cell extracts were high enough to account for the growth rate. The enzyme showed a preference for (S)-1,2-propanediol over (R)-1,2-propanediol. Antibodies raised against the alcohol dehydrogenase ofD. gigas showed cross-reactivity with the alcohol dehydrogenase ofDesulfovibrio strain HDv and with cell extracts of six other ethanol-grown sulfate-reducing bacteria.     

Improved purification of Candida boidinii formate dehydrogenase

Formate dehydrogenase (FDH, EC 1.2.1.2) from Candida boidinii was purified to homogeneity. The two step procedure comprised anion exchange chromatography (2.9-fold purification, 85% step yield, elution with 35 mM KCl), followed by dye-ligand affinity chromatography on immobilized Cibacron Blue 3GA (1.4-fold purification, 75% step yield, elution with 0.15 mM NAD⁺/2 mM Na₂SO₃). The procedure afforded FDH at 63.8% overall yield and a specific activity of 7.2 units/mg. The purity of the final FDH preparation was evaluated by sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE), high performance gel filtration liquid chromatography (gfHPLC) and N-terminal amino acid sequencing. The analytical techniques showed the presence of a single polypeptide chain that corresponds to the molecular weight of 41 kDa (as determined by SDS-PAGE) and 81 kDa (as determined by gfHPLC).     

Structural and biochemical characterisation of a NAD+-dependent alcohol dehydrogenase from Oenococcus oeni as a new model molecule for industrial biotechnology applications

Alcohol dehydrogenases are highly diverse enzymes catalysing the interconversion of alcohols and aldehydes or ketones. Due to their versatile specificities, these biocatalysts are of great interest for industrial applications. The adh3-gene encoding a group III alcohol dehydrogenase was isolated from the gram-positive bacterium Oenococcus oeni and was characterised after expression in the heterologous host Escherichia coli. Adh3 has been identified by genome BLASTP analyses using the amino acid sequence of 1,3-propanediol dehydrogenase DhaT from Klebsiella pneumoniae and group III alcohol dehydrogenases with known activity towards 1,3-propanediol as target sequences. The recombinant protein was purified in a two-step column chromatography approach. Crystal structure determination and biochemical characterisation confirmed that Adh3 forms a Ni²⁺-containing homodimer in its active form. Adh3 catalyses the interconversion of ethanol and its corresponding aldehyde acetaldyhyde and is also capable of using other alcoholic compounds as substrates, such as 1,3-propanediol, 1,2-propanediol and 1-propanol. In the presence of Ni²⁺, activity increases towards 1,3-propanediol and 1,2-propanediol. Adh3 is strictly dependent on NAD⁺/NADH, whereas no activity has been observed with NADP⁺/NADPH as co-factor. The enzyme exhibits a specific activity of 1.1 U/mg using EtOH as substrate with an optimal pH value of 9.0 for ethanol oxidation and 8.0 for aldehyde reduction. Moreover, Adh3 exhibits tolerance to several metal ions and organic solvents, but is completely inhibited in the presence of Zn²⁺. The present study demonstrates that O. oeni is a group III alcohol dehydrogenase with versatile substrate specificity, including Ni²⁺-dependent activity towards 1,3-propanediol.     

Characterization of Thermotoga maritima glycerol dehydrogenase for the enzymatic production of dihydroxyacetone

NAD-dependent Thermotoga maritima glycerol dehydrogenase (TmGlyDH) converts glycerol into dihydroxyacetone (DHA), a valuable synthetic precursor and sunless tanning agent. In this work, recombinant TmGlyDH was characterized to determine if it can be used to catalyze DHA production. The pH optima for glycerol oxidation and DHA reduction at 50 °C were 7.9 and 6.0, respectively. Under the conditions tested, TmGlyDH had a linear Arrhenius plot up to 80 °C. TmGlyDH was more thermostable than other glycerol dehydrogenases, remaining over 50 % active after 7 h at 50 °C. TmGlyDH was active on racemic 1,2-propanediol and produced (R)-1,2-propanediol from hydroxyacetone with an enantiomeric excess above 99 %, suggesting that TmGlyDH can also be used for chiral synthesis. (R)-1,2-propanediol production from hydroxyacetone was demonstrated for the first time in a one-enzyme cycling reaction using glycerol as the second substrate. Negative cooperativity was observed with glycerol and DHA, but not with the cofactor. Apparent kinetic parameters for glycerol, DHA, and NAD(H) were determined over a broad pH range. TmGlyDH showed little activity with N⁶-carboxymethyl-NAD⁺ (N⁶-CM-NAD), an NAD⁺ analog modified for easy immobilization to amino groups, but the double mutation V44A/K157G increased catalytic efficiency with N⁶-CM-NAD⁺ ten-fold. Finally, we showed for the first time that a GlyDH is active with immobilized N⁶-CM-NAD⁺, suggesting that N⁶-CM-NAD⁺ can be immobilized on an electrode to allow TmGlyDH activity in a system that reoxidizes the cofactor electrocatalytically.     

Novel and efficient method for immobilization and stabilization of β-d-galactosidase by covalent attachment onto magnetic Fe3O4–chitosan nanoparticles

A novel and efficient immobilization of β-d-galactosidase from Aspergillus oryzae has been developed by using magnetic Fe₃O₄–chitosan (Fe₃O₄–CS) nanoparticles as support. The magnetic Fe₃O₄–CS nanoparticles were prepared by electrostatic adsorption of chitosan onto the surface of Fe₃O₄ nanoparticles made through co-precipitation of Fe²⁺ and Fe³⁺. The resultant material was characterized by transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry and thermogravimetric analysis. β-d-Galactosidase was covalently immobilized onto the nanocomposites using glutaraldehyde as activating agent. The immobilization process was optimized by examining immobilized time, cross-linking time, enzyme concentration, glutaraldehyde concentration, the initial pH values of glutaraldehyde and the enzyme solution. As a result, the immobilized enzyme presented a higher storage, pH and thermal stability than the soluble enzyme. Galactooligosaccharide was formed with lactose as substrate by using the immobilized enzyme as biocatalyst, and a maximum yield of 15.5% (w/v) was achieved when about 50% lactose was hydrolyzed. Hence, the magnetic Fe₃O₄–chitosan nanoparticles are proved to be an effective support for the immobilization of β-d-galactosidase.     

Synthesis of a Highly Substituted N-Linked Immobilized NAD Derivative Using a Rapid Solid-Phase Modular Approach: Suitability for Use with the Kinetic Locking-on Tactic for Bioaffinity Purification of NAD-Dependent Dehydrogenases

This study is concerned with further development of the kinetic locking-on strategy for bioaffinity purification of NAD⁺-dependent dehydrogenases. Specifically, the synthesis of highly substituted N⁶-linked immobilized NAD⁺ derivatives is described using a rapid solid-phase modular approach. Other modifications of the N⁶-linked immobilized NAD⁺ derivative include substitution of the hydrophobic diaminohexane spacer arm with polar spacer arms (9 and 19.5 Å) in an attempt to minimize nonbiospecific interactions. Analysis of the N⁶-linked NAD⁺ derivatives confirm (i) retention of cofactor activity upon immobilization (up to 97%); (ii) high total substitution levels and high percentage accessibility levels when compared to S⁶-linked immobilized NAD⁺ derivatives (also synthesized with polar spacer arms); (iii) short production times when compared to the preassembly approach to synthesis. Model locking-on bioaffinity chromatographic studies were carried out with bovine heart -lactate dehydrogenase ( -LDH, EC 1.1.1.27), bakers yeast alcohol dehydrogenase (YADH, EC 1.1.1.1) and Sporosarcinia sp. -phenylalanine dehydrogenase ( -PheDH, EC 1.4.1.20), using oxalate, hydroxylamine, and -phenylalanine, respectively, as locking-on ligands. Surprisingly, two of these test NAD⁺-dependent dehydrogenases (lactate and alcohol dehydrogenase) were found to have a greater affinity for the more lowly substituted S⁶-linked immobilized cofactor derivatives than for the new N⁶-linked derivatives. In contrast, the NAD⁺-dependent phenylalanine dehydrogenase showed no affinity for the S⁶-linked immobilized NAD⁺ derivative, but was locked-on strongly to the N⁶-linked immobilized derivative. That this locking-on is biospecific is confirmed by the observation that the enzyme failed to lock-on to an analogous N⁶-linked immobilized NADP⁺ derivative in the presence of -phenylalanine. This differential locking-on of NAD⁺-dependent dehydrogenases to N⁶-linked and S⁶-linked immobilized NAD⁺ derivatives cannot be explained in terms of final accessible substitutions levels, but suggests fundamental differences in affinity of the three test enzymes for NAD⁺ immobilized via N⁶-linkage as compared to thiol-linkage.     

Heterologous production of extreme alkaline thermostable NAD+-dependent formate dehydrogenase with wide-range pH activity from Myceliophthora thermophila

NAD⁺-dependent formate dehydrogenase(s) (EC 1.2.1.2, FDH) catalyzes the interconversion of formate anion to carbon dioxide coupled with the conversion of NAD⁺ or NADH. FDHs attract significant attention in biotechnology due to their potential applications in NAD(H)-dependent industrial biocatalysis as well as in the production of renewable fuels and chemicals from carbon dioxide. In the present work, a new FDH from thermophilic fungus Myceliophthora thermophile (MtFDH) was characterized. The gene of the enzyme was synthesised, cloned, expressed in E. coli, as 6His-tagged protein, and purified to homogeneity by metal chelate affinity chromatography. Kinetic analysis suggested that MtFDH exhibits higher catalytic efficiency on NaHCO₃ compared to formate. Notable, recombinant MtFDH displays a pH optimum for the conversion of formate anion to carbon dioxide at extreme alkaline pH (pH 10.5). Thermal stability analysis showed that the enzyme displays good thermostability with T_m 48 °C. Homology modelling and phylogenetic analysis suggested that the enzyme belongs to the D-specific 2-hydroxy acid dehydrogenases family. The active-site residues are well conserved compared to other homologous FDHs. The results of the present work provide new knowledge on the structure, function and diversity of FDHs and indicate that MtFDH possess a huge potential for CO₂ reduction or NADH generation and under extreme alkaline conditions.     

Isolation of a bacterium assimilating (R)-3-chloro-1,2-propanediol and production of (S)-3-chloro-1,2-propanediol using microbial resolution

A bacterium capable of assimilating 3-chloro-1,2-propanediol was isolated from soil by enrichment culture. The strain was identified as Alcaligenes sp. by taxonomic studies. The crude extracts of the cells had dehalogenating activities and converted various halohydrins to the corresponding epoxides. 3-Chloro-1,2-propanediol was degraded stereospecifically by the strain, liberating chloride ion. The residual isomer was found to be the (S)-form (99.4% enantiomeric excess). (S)-3-Chloro-1,2-propanediol was obtained from the racemate by use of this strain in 38% yield, and (S)-glycidol (99.4% enantiomeric excess) was subsequently synthesized from the obtained (S)-3-chloro-1,2-propanediol by alkaline treatment.     

Immobilization of yeast alcohol dehydrogenase on magnetic nanoparticles for improving its stability

Yeast alcohol dehydrogenase (YADH) was immobilized covalently on Fe₃O₄ magnetic nanoparticles (10.6 nm) via carbodiimide activation. The immobilization process did not affect the size and structure of magnetic nanoparticles. The YADH-immobilized magnetic nanoparticles were superparamagnetic with a saturation magnetization of 61 emu g^–1, only slightly lower than that of the naked ones (63 emu g^–1). Compared to the free enzyme, the immobilized YADH retained 62% activity and showed a 10-fold increased stability and a 2.7-fold increased activity at pH 5. For the reduction of 2-butanone by immobilized YADH, the activation energies within 25–45 °C, the maximum specific activity, and the Michaelis constants for NADH and 2-butanone were 27 J mol^–1, 0.23 mol min^–1 mg^–1, 0.62 mM, and 0.43 M, respectively. These results indicated a structural change of YADH with a decrease in affinity for NADH and 2-butanone after immobilization compared to the free enzyme.     

Reversible immobilization of invertase on Cu-chelated polyvinylimidazole-grafted iron oxide nanoparticles

Polyvinylimidazole (PVI)-grafted iron oxide nanoparticles (PVIgMNP) were prepared by grafting of telomere of PVI on the iron oxide nanoparticles. Different metal ions (Cu²⁺, Zn²⁺, Cr²⁺, Ni²⁺) ions were chelated on polyvinylimidazole-grafted iron oxide nanoparticles, and then the metal-chelated magnetic particles were used in the adsorption of invertase. The maximum invertase immobilization capacity of the PVIgMNP–Cu²⁺ beads was observed to be 142.856 mg/g (invertase/PVIgMNP) at pH 5.0. The values of the maximum reaction rate (V _max) and Michaelis–Menten constant (Km) were determined for the free and immobilized enzymes. The enzyme adsorption–desorption studies, pH effect on the adsorption efficiency, affinity of different metal ions, the kinetic parameters and storage stability of free and immobilized enzymes were evaluated.     

Reconstitution of the Z-Disk

Methanol-utilizing bacteria, Klebsiella sp. No. 101 and Microcyclus eburneus could grow aerobically and statically on 1,2-propanediol. The authors examined the presence of enzyme activity of adenosyl-B₁₂ dependent diol dehydratase as well as NAD dependent diol dehydroagenase. Adenosyl-B₁₂ dependent diol dehydratase activity was not detected in these organisms, even if these grown statically.

The dehydrogenase activity was found in the extract from these methanol-utilizing bacteria cells grown on various carbon sources. The partially purified enzyme preparation from the cells of Mic. eburneus grown aerobically on 1,2-propanediol dehydrogenated 1,2-propanediol, 1,2-butanediol and 2,3-butanediol. The enzyme activity was separated into two fractions, namely enzyme I and II on DEAE-Sephadex A-25 column chromatography. The enzyme I was different from the enzyme II in the ratio of enzyme activity to 1,2-propanediol and 2,3-butanediol, heat stability, pH stability and pH optimum, and effect of 2-mercaptoethanol.     

Promising properties of a formate dehydrogenase from a methanol-assimilating yeast Ogataea parapolymorpha DL-1 in His-tagged form

The cDNA gene coding for formate dehydrogenase (FDH) from Ogataea parapolymorpha DL-1 was cloned and expressed in Escherichia coli. The recombinant enzyme was purified by nickel affinity chromatography and was characterized as a homodimer composed of two identical subunits with approximately 40 kDa in each monomer. The enzyme showed wide pH optimum of catalytic activity from pH 6.0 to 7.0. It had relatively high optimum temperature at 65 °C and retained 93, 88, 83, and 71 % of its initial activity after 4 h of exposure at 40, 50, 55, and 60 °C, respectively, suggesting that this enzyme had promising thermal stability. In addition, the enzyme was characterized to have significant tolerance ability to organic solvents such as dimethyl sulfoxide, n-butanol, and n-hexane. The Michaelis–Menten constant (K _m), turnover number (k _cat), and catalytic efficiency (k _cat/K _m) values of the enzyme for the substrate sodium formate were estimated to be 0.82 mM, 2.32 s^?1, and 2.83 mM^?1 s^?1, respectively. The K _m for NAD⁺ was 83 μM. Due to its wide pH optimum, promising thermostability, and high organic solvent tolerance, O. parapolymorpha FDH may be a good NADH regeneration catalyst candidate.     

Efficient biosynthesis of uridine diphosphate glucose from maltodextrin by multiple enzymes immobilized on magnetic nanoparticles

Uridine diphosphate glucose (UDP-Glc) serves as a glucosyl donor in many enzymatic glycosylation processes. This paper describes a multiple enzyme, one-pot, biocatalytic system for the synthesis of UDP-Glc from low cost raw materials: maltodextrin and uridine triphosphate. Three enzymes needed for the synthesis of UDP-Glc (maltodextrin phosphorylase, glucose-1-phosphate thymidylytransferase, and pyrophosphatase) were expressed in Escherichia coli and then immobilized individually on amino-functionalized magnetic nanoparticles. The conditions for biocatalysis were optimized and the immobilized multiple-enzyme biocatalyst could be easily recovered and reused up to five times in repeated syntheses of UDP-Glc. After a simple purification, approximately 630 mg of crystallized UDP-Glc was obtained from 1 l of reaction mixture, for a moderate yield of around 50% (UTP conversion) at very low cost.     

Purification and Characterization of Cytosolic NADP Specific Isocitrate Dehydrogenase from Pisum sativum

Cytosolic NADP-specific isocitrate dehydrogenase was isolated from leaves of Pisum sativum. The purified enzyme was obtained by ammonium sulfate fractionation, ion exchange, affinity, and gel filtration chromatography. The purification procedure yields greater than 50% of the total enzyme activity originally present in the crude extract. The enzyme has a native molecular weight of 90 kilodaltons and is resolved into two catalytically active bands by isoelectric focusing. Purified NADP-isocitrate dehydrogenase exhibited K_m values of 23 micromolar for dl-isocitrate and 10 micromolar for NADP, and displayed optimum activity at pH 8.5 with both Mg²⁺ and Mn²⁺.     

Microbial oxidation of methanol: Purification and properties of formaldehyde dehydrogenase from a Pichia sp. NRRL-Y-11328

An NAD⁺-linked, reduced glutathione-dependent formaldehyde dehydrogenase was purified to homogeneity from soluble extracts of methanol-grown yeast, Pichia sp. Formaldehyde and methylglyoxal are oxidized in the presence of NAD⁺ as an electron acceptor. NADP⁺ could not replace NAD⁺. Other straight chain aldehydes (C₂–C₆ tested), branched-chain aldehydes (e.g., isobutyaldehyde), aromatic aldehydes (e.g., salicylal-dehyde, benzaldehyde), glutyraldehyde, glyceraldehyde, glycoaldehyde, and glyoxal-dehyde tested were not oxidized by the purified formaldehyde dehydrogenase. The product of formaldehyde oxidation by purified enzyme was demonstrated to be S-for-mylglutathione by measuring the absorption at 240 nm due to the formation of thioester of formaldehyde and reduced glutathione. The K_m values for NAD⁺, formaldehyde, and reduced glutathione were 0.12, 0.31, and 0.16 mm, respectively, for the forward reaction at pH 8.0. The purified formaldehyde dehydrogenase also catalyzed the reduction of S-formylglutathione in the presence of NADH. Formate was not reduced by the purified enzyme. The K_m values for S-formylglutathione and NADH were 0.60 and 0.25 mm, respectively, for the reverse reaction at pH 6.0. Formaldehyde dehydrogenase has a molecular weight of 84,000 as determined by gel filtration and subunit molecular weight of 41,000 as determined by sodium dodecyl sulfate-gel electrophoresis. S-Formylglutathione, a product of formaldehyde oxidation, was oxidized by the partially purified formate dehydrogenase from Pichia sp. Formate dehydrogenase has a higher affinity toward S-formylglutathione (K_m value 1.8 mm) than toward formate (K_m value 25 mm). Antiserum prepared against the purified formaldehyde dehydrogenase from Pichia sp. NRRL-Y-11328 forms strong precipitin bands with isofunctional enzymes from methanol-grown Pichia pastoris NRRL-Y-7556 and Torulopsis candida Y-11419 and weak precipitin bands with Hansenula polymorpha NRRL-Y-2214. No cross-reaction was observed with isofunctional enzyme derived from methanol-grown Kloeckera sp.     

Rhamnose-induced propanediol oxidoreductase in Escherichia coli: purification, properties, and comparison with the fucose-induced enzyme.

Escherichia coli are capable of growing anaerobically on L-rhamnose as a sole source of carbon and energy and without any exogenous hydrogen acceptor. When grown under such condition, synthesis of a nicotinamide adenine dinucleotide-linked L-lactaldehydepropanediol oxidoreductase is induced. The functioning of this enzyme results in the regeneration of nicotinamide adenine dinucleotide. The enzyme was purified to electrophoretic homogeneity. It has a molecular weight of 76,000, with two subunits that are indistinguishable by electrophoretic mobility. The enzyme reduces L-lactaldehyde to L-1,2-propanediol with reduced nicotinamide adenine dinucleotide as a cofactor. The Km were 0.035 mM L-lactaldehyde and 1.25 mM L-1,2-propanediol, at pH 7.0 and 9.5, respectively. The enzyme acts only on the L-isomers. Strong substrate inhibition was observed with L-1,2-propanediol (above 25 mM) in the dehydrogenase reaction. The enzyme has a pH optimum of 6.5 for the reduction of L-lactaldehyde and of 9.5 for the dehydrogenation of L-1,2-propanediol. The enzyme is, according to the parameters presented in this report, indistinguishable from the propanediol oxidoreductase induced by anaerobic growth on fucose.     

Purification of pigeon liver malic enzyme by affinity chromatography

A simple and rapid method for the purification of malic enzyme (EC 1.1.1.40) from pigeon liver is described. Malic enzyme in the crude tissue extract was partially purified by heat treatment, ammonium sulfate fractionation, and DEAE-cellulose chromatography. Final purification was achieved by affinity chromatography on immobilized N⁶-(6-aminohexyl)-adenosine 2′,5′-bisphosphate. Apparently homogeneous enzyme was obtained in 2 days with 54% yield.     

Glycerol Dehydrogenase from Cellulomonas sp. NT3060: Purification and Characterization

NAD⁺-dependent glycerol dehydrogenase from Cellulomonas sp. NT3060 was purified by a procedure of 10 steps involving crystallization. Dihydroxyacetone was identified as the oxidation product of glycerol with the enzyme. The purified enzyme did not lose activity on heating below 60°C. The enzyme oxidized other alcohols such as 1,2-propanediol, 2,3-butanediol and glycerol-α-monochlorohydrin, beside glycerol. The enzyme activity was inhibited by p-chloromercuribenzoate, Zn²⁺, Cu²⁺ and Cd²⁺. Oxidation of glyberol was activated by Na⁺ and reduction of dihydroxyacetone was activated by K⁺ at pH 7.5.     

One‐step selective affinity purification and immobilization of His‐tagged enzyme by recyclable magnetic nanoparticles

The NiFe₂O₄ magnetic nanoparticles (NF‐MNPs) were prepared for one‐step selective affinity purification and immobilization of His‐tagged recombinant glucose dehydrogenase (GluDH). The prepared nanoparticles were characterized by a Fourier‐transform infrared spectrophotometer and microscopy. The immobilization and purification of His‐tagged GluDH on NF‐MNPs were investigated. The optimal immobilization conditions were obtained that mixed cell lysis and carriers in a ratio of 0.13 in pH 8.0 Tris‐HCl buffer at 30℃ and incubated for 2 h. The highest activity recovery and protein bindings were 71.39% and 38.50 μg mg^–1 support, respectively. The immobilized GluDH exhibited high thermostability, pH‐stability and it can retain more than 65% of the initial enzyme after 10 cycles for the conversion of glucose to gluconolactone. Comparing with a commercial Ni‐NTA resin, the NF‐MNPs displayed a higher specific affinity with His‐tagged recombinant GluDH.     

One-step purification and immobilization of His-tagged rhamnosidase for naringin hydrolysis

α-l-Rhamnosidase (EC 3.2.1.40) is an enzyme that catalyzes the cleavage of terminal rhamnoside groups from naringin to prunin and rhamnose. In this study, a His-tag was genetically attached to the rhamnosidase gene ramA from Clostridium stercorarium to facilitate its purification from Escherichia coli BL21 (DE3) cells containing the pET-21d/ramA plasmid. Immobilized metal-chelate affinity chromatography (IMAC) resulted in one-step purification of N-terminally His-tagged recombinant rhamnosidase (N-His-CsRamA) which was immobilized in Ca²⁺ alginate (3%) beads. The optimum pH levels of the free and immobilized recombinant rhamnosidase were found to be 6.0 and 7.5, and the optimum temperature 55 and 60 °C respectively. At 50 °C, the free enzyme was relatively stable and exhibited a less than 50% reduction in residual activity after 180 min of incubation. The free and immobilized enzymes achieved 76% and 67% hydrolysis of the naringin in Kinnow juice respectively. Immobilization of recombinant rhamnosidase enabled its reutilization up to 9 hydrolysis batches without an appreciable loss in activity. This result indicated that the His-tagged thermostable rhamnosidase could be prepared as described and may serve to illustrate an economical and commercially viable process for industrial application.